How I made this Bladeless Cybertool M
Вставка
- Опубліковано 23 сер 2024
- Would this knife pass through airport security? Let me know what you think in the comments. Like I said in the video, it will really come down to the TSA agent who is inspecting you. I've seen TSA take fingernail clippers away from an elderly woman before, so, really nobody can say for sure if it will pass. LOL
I hope you all enjoyed this build video and please share your thoughts.
Thank you everybody for a great 2021 and let's have an even better 2022!!!
You can find more of my work on my website and information on how to order a custom Swiss Army Knife:
f2scustoms.com/
My Instagram:
/ fit2survive_
Amazon links to most of what I used to make these knives:
Victorinox Cybertool M: amzn.to/3pK65Uy
Brass rods for reassembly: amzn.to/3eRsYid
Ferric Chloride: amzn.to/31dfE4H
G10 for liners: amzn.to/3xEKK0C
Scales were found on Aliexpress. I do not have a link for them.
Music from: www.purple-pla... - Навчання та стиль
Finally, a DIY project that dosent need 3D printing, Machining or a furnace!
Nowadays everyone seems to have tools for that, except me :(
You and me both... 🤣 Although I'd love to have them.
Neither do I
As someone that wanted a bladeless multitool, and ended up with a modded cybertool lite, I will share my own research. To pass TSA guidelines there are four important things to note. First of all, they might try to stick the "No swiss army knife" rule on you, because of the cross Design on the front. However, TSA guidelines clearly state that you CAN have a multitool in your bag, as long as it doesn't have a knife blade. You will probably want to make a sheath for it to rest inside of to be extra compliant. Second is the scissors. TSA states that you are allowed to have scissors if they are less than four (4) inches to the fulcrum. Since this is a small set of scissors, it should be fine regardless of which fulcrum the agent chooses to try to use. The third is the most surprising. The bit driver will fall under the "collapsible tool" rule, and must be less than seven (7) inches long when fully extended and assembled. The bit driver should just barely squeak by this. The last one doesn't apply to your build, but is good to know. According to TAS guidelines, corkscrews are permitted on the plane, as long as they are not attached to a knife blade.
Hope that is helpful!
Wow!! That is VERY helpful actually! Thank you for all of that information.
The problem i see is that it looks so cool that the agent might want it for themselves, thus trying to take it from you. I'd love an update once you actually went thru the airport with it
@@nobodxy Yeah, that would definitely be an extra difficulty.
I built this knife for somebody else. If he flies with it, I will update if he flies with it.
Yes, thank you very much! All info is helpful. Sadly I still feel that it will come down to the agent and how they are feeling that day and if you have the time to whip out the document and argue your point.
@@korgan7779 if you want to fly with a tool like this, you will be served well by having a paper printout of the regulations, so that if there is a "Problem" you can show that you are in compliance.
It is difficult to claim something is TSA compliant…because I’ve had a bladeless leatherman style confiscated on an international flight because of the scissors..and ive flown enough to know that it’s really up to what mood the agent is..They can pretty much say anything is non compliant if they feel it is.
Yeah, that really does make it risky. It'd be so much easier if there was a set rule that tools had to comply to without the judgment of a grumpy TSA agent.
@@MPD90 that's not gonna happen hahaah. They just move you on, they took the Leatherman Style because they wanted it for themselves.
Just put it in your main luggage or post it over to where you are going
@@MPD90 The TSA IS the mistake.
I’m a flight attendant and have taken a few bladeless tools through since 911, one for over a year of getting spot checked , only to have it removed by a tsa agent that probably wanted it for himself. While in uniform I can’t really argue my point as it gets me in trouble , I just have to roll with it . Multi tools are useful for us as we have stuff in the galleys that need tightening sometimes and all of the hotel windows are often screwed shut, posing an evacuation risk . It really is up to agents at tsa and if they want your stuff. There is no guideline of any sort just a no blade rule. Small scissors are allowed , and then you have the 12 inch knitting needles that are allowed so none of it makes any sense at all. I’m currently carrying a Gerber shard and a cheap set of Amazon mini pliers . I’ve had one shard confiscated, after hanging in there for 6 months .
Most TSA agents who take bladeless tools just want it for themselves. Just put it in your main luggage so the fuckers can't steal it
Even non locking knives aren't allowed in some places in the UK, like schools. So a bladeless tool could be very handy.
Top work as usual
Yeah, I think you're not supposed to carry a knife in school in the Stat nowadays either.
Thank you!!
Meanwhile my local community college in North Texas, in a city with pretty much all out of state locals from all over, declared that they are cool with straight up short swords haha. It's so cool to be here minus us being famous for harboring the underground trumptards or renoun lol
@@zainshaikh527 Texas is the best state! I may be partial though. 😝
I could not live in UK. In my country a have full tang knife on the side of my bag and no one had a problem. I go to the school, restaurant etc.
@@Igni.. Yeah, the UK has some crazy knife laws. I'd hate it.
I'm not sure the black coat will last long but it looks freaking awesome!!! I have and love Swiss Army knives for more than 30 years but I didn't know that they can be customized. You did a terrific job 👌
The acid etched finish can be scuffed off over time with use.
Thank you! 👍🏻
holy crap. that's beautiful and it would be a shame if the TSA confiscated it :O
I had a security agent in Australia confiscate a Leatherman Style PS which was designed from Leatherman to be TSA-friendly. First he pointed at the file and said it had a knife, I told him it was a file and he stared at me with a dull look in his eyes and then just flatly said I couldn't have it.
It never even occurred to me that these things can be so highly customized, excellent work!
Thanks a lot! Yeah, sometimes TSA can just be stubborn and difficult.
I only came across this channel yesterday and I must say I'm impressed, nice easy to watch videos, no useless time wasting drivel (some channels have verbal diarrhoea)
Plenty of info and links but above all, the finished articles are stunning.
Thank you for sharing it with us
Stay safe 👍
Wow! Thanks. That means a lot to me. Glad that you enjoyed my work!
Oh man! That thing looks fantastic, I would have never thought about going for the blue g10 but every build you do with them looks excellent. HNY.
Thank you! I like how the blue G10 turns out too. 👍🏻👍🏻
I wouldn’t take that chance of being TSA approved….Wouldn’t want to loose the nice build.
Yeah, there's always a risk.
Fantastic build, love to see the process this way and get your comments in. I’m serious when I say this, you’ve got the best approach and informational videos when it comes to modding SAKs, this is the kind of stuff I looked for when I started out. Keep it going, you rock man!
Thanks a lot! Glad that you enjoyed it!
Comments like these really make it worth the 3+ hours of video editing that goes into a video like this.
FINALLY A STEP-BY-STEP! Love your work man, this was exactly the video we were waiting for.
Glad that you enjoyed it!
I’m not sure about tsa but this would definitely come in handy when visiting countries with strict knife laws. Cool build btw loved the textured tools.
Yeah, a couple of other people have mentioned that. I didn't think about it at first, but you are right. It would be a good build for places like that.
I love that knife! You did an incredible job of designing and building it. And blue is my favorite color.
Thank you! I appreciate it! 👍🏻👍🏻😁
Astonishing Bill looks amazing something I won't mind having on my EDC kit. You're right about the scissors TSA won't let it pass nothing that has an edge on it.
Thank you! Hmm... That's what I thought.
Very-very nice job on this project sir. I've been carrying a Leatherman Surge in a Deadskin Leather Sheath for many years now, and as a truck driver, I pretty much use this well weathered tool daily for this and that...for me it's priceless. I don't know, but the awl may give you problems with some TSA individuals. I wish you the best of luck in your travel adventures sir. Be well.
Thank you!
My EDC is a Leatherman Charge Ti. It also gets lots of love.
I appreciate it!
It's a coolest idea and job, which I saw at the past few years!!! I even just couldn't imagine that it possibly to make such incredibly masterpiece out of a such nondescript swiss... To say amazing - to say nothing...
Thank you! I greatly appreciate that! 👍🏻👍🏻👍🏻
Amazing. I’d remove the pliers and swap out the bottle open and can opener for a Spyderco blade that can be opened with just my right hand. And of course add a pocket clip on the scissors side. I would use that thing multiple times daily.
Thanks. 👍🏻 Sounds like a good toolset.
This video is awesome! Since I always have a pocket knife with me, I feel like having a multi tool with a blade is a bit redundant. Why not get rid of the blade and add more tools? So clever.
Thank you! Glad that you understood the concept. ☺️👍🏻
Good video quality and perfect timing.
Thank you!
I'm a new subscriber. I'm glad I found your channel. I personally wouldn't try to take it on the plane only because if they didn't allow it, they might confiscate it unless you have a way to mail it back home? It may make the first leg, but the return flight may get it captured. I lost a white handled Swiss climber at the airport because I forgot I had it in my backpack. The TSA kept it. I forgot to put it back in the checked bag.
Hey! Thank you for subscribing! The person I made this knife for said that he plans to fly with it. He's a flight medic and said that he flies often.
But definitely it is a risk every time. TSA's website gives rules for flying with a multitool, but say that the final decision is up to the TSA agent inspecting you.
So awesome. Thank you for sharing! These are some of the dopest videos I've found.
Thanks for watching! Glad to hear that!
Very very well made video and project 🙂👌👌👌 thank you very much for sharing. This one is really an awesome one to show people how it's done. Excellent work 🙂👌👍
Thanks a lot! I am glad that you enjoyed the video! 👍🏻👍🏻👍🏻😎🔥
Damn, I love watching you work. It looks so effortless. Wonderful job!
Thank you for watching!
I subscribed instantly your builds are so sick, never seen someone build them like you 🔥🔥🔥
Thank you! I appreciate it. 👍🏻👍🏻
Amazing job! Thanks for the video.
Thanks for watching!
TSA would take it as it is very cool. That is beautiful work.
Probably right. LOL Thanks.
Nice work, I love the blue separators. Thanks for sharing.
Thanks for watching!
Amazing work and amazing product. Favorite video and build of yours so far 😁😁
Happy new year from Israel
Thank you! Glad that you enjoyed it! Happy New Year!
It’s so nice it will make TSAs eyes water!
😊 Thanks!
Parabéns por sua sensibilidade criativa que resulta em "obras de arte " ! ( Brazil )
Thank you very much! 👍🏻👍🏻
I loved the finish of the acid dip
Thanks.
great video! i wish more companies made tsa approved tools for travel and stuff.
I totally agree!
Please don't chance that beauty with the TSA clowns bro!! Great work. I would be very proud of that
Yeah, it would be really sad to lose.
This is amazing, would love to try this someday
Thanks. Should give it a try. 👍🏻👍🏻
Great job. Thanks for taking the time to show us so many steps youu take. A lot of work goes into every knife and even more going into the video work, very time consuming. Again, really good video.
Thank you! Yes, it really does take quite a while to make both the knife and video. 👍🏻
Beautiful mod. I'd love to do something similar with a SwissChamp XLT, but just replace the blades with non-blade tools in order to keep the tools on the opposite side like the corkscrew.
That's incredible.
Thank you!
Beautiful job man, it's real art.Greetings from Croatia.
Thanks a lot!
How cool!
Great work. I really like the set up. 🌸
Thank you! 😉
Been working great for me, got everything I need in 1 place
Awesome! I was about to send you a link. Glad to hear that it is working great for you.
I love the new change ! 😎
That's great! 👍🏻👍🏻
Amazing work, compliments to the maker
😅 Thank you.
@Fit to Survive and I love the idea of brasswash, didn't know it had such a nice effect. I used small rocks before. Fantastic.
@@Andrew-wb9kg Yeah, it turns out nicely.
You are a real Artist! So beautiful!!!! 🥰
Thank you very much!!
Fantastic works as always..👍🏼👍🏼
Thank you!
As a guy who carries a bench made I need a good tool but don’t want a knife this is Genius
Awesome! Thanks. 👍🏻👍🏻
I am going to try this on some cheap knives to practice before I do my expensive thank you for such a great tutorial
Awesome! You are welcome.
So Awesome… I‘m in love with that cool Cyber Tool🤩🤩🤩
Thanks you! I am thrilled to hear that.
That turned out beautifully. Well done.
New subscriber.
Thank you for the compliment and sub!
Hello, another great build! I am again amazed at your tech and artistry skills...I like the color combination and can see the effort and care needed to get the tools and the other elements of the build to look the way they do...beautiful...I hate to sound uncharitable, but I believe the tool will be "nicked" because it looks so good and the scissors will be the excuse...Personally though, I don't see any reason why there would be a problem...Many thanks to you for all your efforts during 2021, I have enjoyed your videos; seeing you make practical tools with an esthetic bent to them...I am pleased to see your growth during this year, much deserved...May you, your wife and yours have a happy, prosperous New Year with many blessings and continued success!
Wow! Thanks a lot! Really made my day!
You do have a really good point. 🤔 TSA may take this just because it looks too good. 🤣🤣🤣
Happy New Year! Thank you for all of your support!
Я восхищён! Ювелирная работа ! Уважение !
Спасибо!! 👍🏻😎
Beautifully done. Great job.
Thank you!
Красный пластик есть?
@@TheEnd-op2bv Стандартные накладки? Есть.
This is a work of art
Thank you!
when doing another project, should try with watch luminous powder mixture, epoxy for filling the plus sign hole and that will be awesome..
sorry for my english..
That is a really cool idea! 👍🏻 I should give that a try.
That is Beautiful!
Thank you!
It's amazing the way you work and "how easy" you make things look. Congratulations and what a nice job. Waiting on how that WAVT is looking!!! Greetings from Mexico
Thank you! I appreciate that. I need to get back to the XAVT project. I have been swamped with orders and have abandoned it... But I will get it done!
That turned out fantastic
Thank you!
That's way too cool!
Thanks!
Great video! Really enjoyed that
Thanks! 👍🏻👍🏻👍🏻
Как всегда высший пилотаж 🔥
Hey what’s up bro! Excellent build as always. Love how you intricately make these mods, very nice! However, like what we have discussed on IG, if the TSA agent is an IG or UA-cam follower of yours, it might not. ✌🏼😂 Happy new year bro! 🇵🇭 🥂
Hey! Thank you!
Yeah for sure. 😂😂😂😂
Happy new year!!
Oh , that looks really great . I wish you sale this one . I would be happy to buy it . lol
But seriously , you sh sale these more . good luck
I do sell these. I make them to custom order. But my waiting list is about 36 weeks. Check out my website for information. www.f2scustoms.com
I would love to have one with a YuBikey and possible usb flash storage build inn. Also an IPhone sim extractor pin
The Yubikey and USB drive would be rough to add. But the sim extractor pin can be added.
great video, thank you, happy new year, I watch with pleasure!!!
Thank you!
Happy New Year!
It's all wonderful!🎉
Thank you! 😊
Honestly that looks nice if you have a lot of time, skills, tools and spare parts but i would have probably just snapped or sawed the blades off and called it good if i needed to make anything like that. Both because i don't think I personally could do much better than they do in the factory as far as Victorinox is concerned but also because i don't care enough about the aesthetics as much as the usability in a tool. I still appreciate people like you that do care about stuff like that a great deal and the idea with the g10 is actually pretty interesting. It's a cool material and i see it being used in many interesting places to substitute many materials more and more. Good job
LOL That's hilarious. But I do get what you are saying. 👍🏻
Thanks!
Good job man!
Thanks!
Amazing work dude
Thank you!
Amazing, what a nice project , I will never attempt to board a comercial flight with sush a beuty in muy pocket
Thanks! Yeah, it would be scary to risk it.
It’s looks awesome!!! Thanks for the content.
Thank you! Glad you enjoyed.
amazing video kinda funny im working on almost the complete opposite for myself. cybertool with just blades screw driver and corkscrew. i bent the crap out of my liners thougfh so i think i need to get some G10
Thanks. I'm sure that will. Be an interesting build. 👍🏻😁
The final result look amazing and I kow it's quite a nice job. But a bladless swiss knive is like a balless American.
Thanks! Yeah, it is a shame to make a bladeless "knife". I have a new "TSA safe" project planned for February that is going to have a removable scalpel blade. That way before flying, you could remove and toss the scalpel blade and after arriving just snap on a new scalpel.
This thing looks awesome! I am a little confused by the "Bladeless" title though. It still has a scissors and a wire stripping knife. Both of which are blades...
I guess you are right. 🤔 I can see how the scissors could be considered "2 blades". I'm going to be doing another project here soon, it's going to be another "bladeless" mod. 😁
beautiful work brother
Thanks a lot!
I usually have my cybertool with me while travelling if I'm checking in luggage. We visited Legoland a few years ago and I wasn't allowed to bring it into the park because...of the screwdriver parts. The blades were not a problem 🙂
What??? Because of the screwdriver? 🤣 That's crazy. They must have thought that you'd take something apart...
Wow amazing build! this video will be very useful for my first custom, i will start easy i just want to remove the saw on my huntsman and acid & brass wash. All that remains is to receive the titanium scales
Awesome! I am glad that you found this video useful! Good luck on your project!
Great work, very informative. I'm starting to realize that choosing an 84mm as my starting project might have been slightly more difficult to start learning on then a 91mm or especially a 93mm as I'm having to make a lot more custom parts but oh well, just means more will be easier later.
I think Ill have to look into using G10 liners down the road as well. Currently using the aluminum and custom brass liners.
As far as TSA is concerned; Just say NO. There are way to many factors involved and the worst one is that a human is the judge of what is and isn't allowed. If they are going to make restrictions and have them written down then they should enforce them without so called interpolations based on 1 or 2 peoples beliefs and what kind of day they are having. I would not risk a custom piece on someone else's bad day.
Yeah, the 84mm is rough because it is really limited.
You are most definitely right about the TSA. It would be a huge risk to try to travel with this tool even if it matches all of TSA's rules.
this is definitely cool.
Thank you!
Great work! Beautyful piece of art. THX!
Thank you!!
@@FittoSurvive Greetings from Poland :)
@@zeth997 Awesome!
It would be tragic if TSA confiscated your beautiful work! I think the leather punch and scissors would be their concern. I took a classic and ground the knife off. (I use the tooth pick and scissors most while traveling.) While going through TSA in China she held it up and showed me the scissors. I told her in Chinese "but there is no knife!" She looked back at the little Classic, nodded, and let me keep it.
Yes, it would definitely be tragic. I was thinking the scissors would be a problem too. Didn't think about the awl being a problem, but I think you are probably right.
Nice watch (Garmin Instinct Solar) 👍
Thanks! Yes, you are correct. 👍🏻👍🏻
what a great video tks for sharing...
Thank you! Glad that you enjoyed!
nice work of art , mad skills
Thank you! I appreciate that.
Spectacular !!!
Thank you!
I've been wanting to get a SAK that is acceptable for work, because they have an aversion to blades (UK), this would be perfect for me! (Currently using a Leatherman Style PS)
Yeah, this would be a good knife for the UK or Europe. Good point. 👍🏻
Perhaps you should’ve filled the cross cutout with some transparent compound to avoid soiling. That’s the only remark. 😊👍🏻
Interesting idea. 👍🏻 I like that.
Excellent work, thanks.
Thank you!
You would think by now there would a Swiss style knife system out there that you can choose what you want to carry for the day. Make it east to swap out components like a quick connect/ disconnect system maybe? I think they would be very popular with folks.
That would be a major breakthrough for Victorinox. Having a modular Swiss Army Knife would be very popular for sure.
Can't get enough of your build videos. This one is by far my favorite as you go into the process in more detail. Have you been able to source the 2.2mm brass rods other than from Europe or via Aliexpress? If not, do you drill out the 2.2mm pin holes (for the corkscrew, etc) to fit 2.5mm pins?
Hey! Glad to hear that!
I have not been able to source the 2.2 mm brass rods from anywhere except for China. I have never drilled out the middle tools to 2.5.
I’d love to have a TSA friendly tool.
I would like to keep the cork screw and screw driver.
I suspect the reamer would not be allowed.
Interesting that the awl would cause trouble being as short as it is.
Nice job❤
I want it ! love it !
👍🏻🤣🤣🤣
amazing as always. unfortunately TSA rules aren't applied everywhere. i would'nt try to go at my airport with it....to beauty to let it be confiscated
Thanks! Yeah, trying to fly with it would be quite the risk.
For TSA any scissor under 4in long (measured from the fulcrum) is allowed to go BUT the awl that you left wouldn't be allowed to go because it's basically a blade
Thanks.
You are welcome
HOLEY CRAP! I'VE HAD THAT KNIFE FOR A YEAR AND DIDN'T KNOW IT HAD A STRAIGHT PIN!
🤣🤣 Glad that you found it now. 👍🏻👍🏻 It is kind of hidden.
Cool! I envy!
Thanks.
Cool. I wish it is possible to buy like this.
Thank you. Check out my website for information on how to order one. www.f2scustoms.com
This is exactly the style multitool ive wanted for years except with locking tools like the Leatherman.
I carry a dedicated knife and have no need for one on a tool like this.
Awesome. Getting locking tools on a Swiss Army knife will be a problem though.
@@FittoSurvive I know, next to impossible.
A bladeless locking multitool is actually on my list of things to have designed.
I really only use a few things for contractor work and like I said, carry a dedicated knife. So it's only going to consists of Pliers, scissors, small prybar/file and a multibit screwdriver, and I have a few other idea to incorporate but that's the jist of it.
Wow - awesome video - thanks!
😊 You are welcome! Glad you liked it
Great work! I need to have one made for my edc.
Thank you! I appreciate it!