I appreciate your videos!! Specially with the LS430 04-06 I did a filter change on mine and followed your directions, car shifts super smooth now thanks buddy!
Don’t let anybody screw you over. If I can help you, I will. Please let me know if you have any questions. Don’t take any crap from anybody your all man. No question!
Hey have you ever ran into issues with 2004 ls430 3rd shift solenoid ? My car been doing it off n on where i wont shift past 3rd. And check engine code says 3rd gear shift solenoid. I had a shop mess with it and it was gone for a while amd then same issue came right back. Seems like alot of ppl has this problem.
Fantastic Video! Comedy is top notch. I've got the same code on an A750 transmission and I'm preparing to buy both the SLU and SLT solenoids for my FJ Cruiser 2014. Transmission overheats about 40 minutes into a long drive over 60mph. Does that sound about right?
I would recommend replacing the entire valve body and make sure you have fluid in it. I don’t think those solenoids will cause an overheating issue, but a low fluid level can cause all kinds of trans problems. Make sure your trans cooler is working and that the fluid level is correct. Please like, subscribe, and share the channel.
Hey homie, keep up the great work! Got a question.. I recently bought an 04 LS430, needless to say it's last relationship was not a healthy one.. Been repairing it since I got it. Currently addressing the p2757 code so am doing this very job. My issue is the SLU and SL2 solenoids are swapped locations in the valve body.. I'm thinking someone tried to do the repair previously and somehow reinstalled wrong.. What do you think? Should I put them in the locations according to the diagram? I see no signs of anyone ever being up in the tranny other than that so I can't be sure if someone did that or it's always been that way. Tranny performed fine, other than the code..
Oh no, you can’t be swapping partners in and out of the relationship! I’d verify first that they are swapped. Make sure that the SLU solenoid matches the one in the video. If it does then I think you just have a solenoid issue. If it doesn’t then someone else has been playing ball on your field. And that’s definitely detrimental to the relationship. Let me know if you have any more questions. Thanks for the feedback on the channel’s content.
Hey buddy I have a question I have a 2001 ls 430 n it ride's smooth I just notice sometimes going into 3rd it drops down then hesitate then jump speed back up I'm thinking it's a solenoid@@griffzillagarage
hey man, great video, i have a 2003 LS430 with 191k miles, when i shift into drive it takes a minute or 2 to get into drive, sometimes reverse doesnt work, sometimes it does, but once its in gear its fine, no slipping, no shuttering or anything. any thoughts? should i try this solenoid? thank u again man !
Hey man. If I was you, this is what I would try. First, I would try adding a bottle of the Lucas stop slip. In addition I would also add the Lucas transmission conditioner. I’ve had amazing results from that on my personal vehicles. It’s not a permanent fix, but it helps buy you some time. You could try the solenoid. But based on the problems you’re having I would be more inclined to just put a complete remanufactured valve body in it. I’ve seen them on eBay with a lifetime guarantee for around $400-$500. Thanks a lot for taking the time to comment and check out my channel. Definitely appreciate if you would subscribe and share it. Please don’t hesitate if you have any other questions.
35280-30050. I recommend just replacing the entire valve body. Please like subscribe and share to help me grow the channel. I hope this helps you out. Please let me know if you have any other questions; and remember I’m the best looking tech that does this stuff! 😂
My 2004 gs300 started having transmission problems it would go into drive reverse and everything but the transmission wouldn’t shift so i changed the transmission fluid, the selenoid harness and the transmission filter now its shifting but it still feels like it struggles a little to shift while driving but after i drove it for a little the check engine light came on and it gave me the p2757 code so i want to know if this could be the problem
It could be. I think the best thing you should do is order a new valve body on eBay that has a lifetime guarantee. I would also substitute a bottle Lucas Transmission stop slip for a quart of the ATF that you usually use. I like the Valvoline max life full synthetic. please like and subscribe and share the channel to help it grow. let me know if you have any other questions.
My 1995 sc400 went into limp mode and has check engine which I can just imagine is the solenoid code where could I find the diagram for the 1995 version sc400?
I’m really sorry I didn’t reply to this sooner. I just saw this while attempting to reply to another one. If you still need this info, please let me know.
Would it be possible if you could send me a link so I can buy this specific part for the P2757 code for 2004 Lexus is300 I looked everywhere and I can’t seem to find this part. Anything would help 🙏🏽
Did you ever change the solenoid? If so did it fix the issue? I have an 04 IS300 aswell and I have the P2757 code. 4th hear has some issues engaging when the vehicle is warming up. Once warmed up all is good
@@BipolarRaven I think you’re gonna need a transmission. But if it were my car, I would try a new valve body. You can get new valve bodies on eBay with a lifetime guarantee for around $500.
@@abc1234567892226 The proper code should give the manufacturer description of the solenoid. Once you have the name of the solenoid you can figure it out from the parts diagram I show it’s not just called “third gear solenoid”. What code do you have? I would recommend just replacing the entire valve body.
@@abc1234567892226 you should have two wires going into the ballast. Cut those and tapped into them If you need any more direct help you may want to check out this video.ua-cam.com/users/shortsyPswF6tvxSA?si=9qD4eTtYrZA9Y-rY
@@simeonpetrov3173 glad I can help. Going to be starting a group/membership that will have live chat and will allow you to ask questions to me in real time. Be on the lookout for a video making that announcement. I would really appreciate if you would like, subscribe, turn on the notifications, and share my channel to help me grow it.
This solenoid replacement will probably not fix the slipping in reverse issue. I would highly discourage a rebuild. I would encourage either a junkyard with a warranty or a new unit. But don’t pay anybody to rebuild it. You’ll get screwed. Thanks a lot for checking out the video. Would appreciate if you would subscribe and share of the channel. Trying to get to 1000 subscribers.
Hey I have a 2005 Ls430 and I got error code p2757 so wats the part number cause I’m seeing two, 35210-50010 and the 35280-30050 which is the one you said you have in the video.
@@marcussimmons7048 would really appreciate if you liked the channel and told others. If I get to 1000 subscribers, God would get the credit instead paying AI to do it for me; that would be really cool.
@@griffzillagarage I took my Lexus to a shop they told me it was the solenoid that’s why it marked the check engine light. Now after watching your video I see that there maybe multiple different solenoids that the car uses. When I start up my 2006 Lexus gs300 and want to drive off by pressing down on the accelerator it stalls for a few seconds then goes. Would you happen to know which solenoid would that be?
@@jonathan_villanueva1291 what code do you have? Is it the same code from the video? If so, I show what solenoid that is. I recommend you try replacing the valve body. You can get them with all the solenoids and a lifetime guarantee and they come with all the solenoids.
This particular solenoid is for the torque converter lock up control or TCC on the parts diagram it says SLU solenoid. It’s part number is TOYOTA LEXUS PART # 35280-30050. There a couple different “shift” solenoids. I would need the code you have to give you the appropriate solenoid part number application.
@@maliknolan5711 pay attention to the parts diagram part of the video. I believe your diagram is the first one I show and it starts by showing the applicable model years. But I need the code you have to identify what solenoid you may need. There are 4 “shift” solenoids.
![Lexus IS250 [P2757] Engine Code Fix [Life of Jonny]](http://i.ytimg.com/vi/Sb_jTTCZ_-8/mqdefault.jpg)
![Lexus IS250 [P2757] Engine Code Fix [Life of Jonny]](/img/tr.png)
I appreciate your videos!! Specially with the LS430 04-06 I did a filter change on mine and followed your directions, car shifts super smooth now thanks buddy!
Glad it helped!
Great video! You make me have more confidence in working on my car with these helpful videos
@@justsomestuff2 thank you I really appreciate the compliment. Encourages me to do more of these videos.
Great job both instruction-wise and video-wise. Lighting was good, too. Enjoy your work.👍👍👍
Thanks. Really appreciate the encouragement.
I really appreciate any help in growing the channel.
I have a 05' LS430 with P2757 code, no trans slippage, I was told to replace the transmission but will try this first. thanks!!
Don’t let anybody screw you over. If I can help you, I will. Please let me know if you have any questions. Don’t take any crap from anybody your all man. No question!
Hi I have the same problem but no symptoms code p2757 still there I changed the solenoid filter and fluid did u fix urs
You should have your own automotive show!
Learned how to replace a solenoid and had bible study
@@rubenhernandez9157 hope you learned something.
Your the right stuff good job.
Hey have you ever ran into issues with 2004 ls430 3rd shift solenoid ? My car been doing it off n on where i wont shift past 3rd. And check engine code says 3rd gear shift solenoid. I had a shop mess with it and it was gone for a while amd then same issue came right back. Seems like alot of ppl has this problem.
I don’t recall a specific problem with the 3rd shift solenoid. Can you tell me what the exact code was?
@@griffzillagaragemines says p0974
@@nahmeanGcode make sure that your fluid level is good. I would definitely try to add a quart or two of Lucas transmission stabilizer to it.
Fantastic Video! Comedy is top notch. I've got the same code on an A750 transmission and I'm preparing to buy both the SLU and SLT solenoids for my FJ Cruiser 2014. Transmission overheats about 40 minutes into a long drive over 60mph. Does that sound about right?
I would recommend replacing the entire valve body and make sure you have fluid in it. I don’t think those solenoids will cause an overheating issue, but a low fluid level can cause all kinds of trans problems. Make sure your trans cooler is working and that the fluid level is correct. Please like, subscribe, and share the channel.
Great comedy knowledgeable video forreal 😂
Glad I can entertain you. I’d appreciate if you helped me grow the channel. Somebody should give me a tv show, it’s just a matter of time🙂
Subscribed
Is that the same thing if code says replace Pressure solenoid assembly?
My daughter has the 2000 gs300
What’s the code for your daughter’s car?
Hey homie, keep up the great work! Got a question.. I recently bought an 04 LS430, needless to say it's last relationship was not a healthy one.. Been repairing it since I got it. Currently addressing the p2757 code so am doing this very job. My issue is the SLU and SL2 solenoids are swapped locations in the valve body.. I'm thinking someone tried to do the repair previously and somehow reinstalled wrong.. What do you think? Should I put them in the locations according to the diagram? I see no signs of anyone ever being up in the tranny other than that so I can't be sure if someone did that or it's always been that way. Tranny performed fine, other than the code..
Or possibly that's why I was getting the code? Just figured that them being swapped would somehow have a major impact on how the tranny performs..
Oh no, you can’t be swapping partners in and out of the relationship! I’d verify first that they are swapped. Make sure that the SLU solenoid matches the one in the video. If it does then I think you just have a solenoid issue. If it doesn’t then someone else has been playing ball on your field. And that’s definitely detrimental to the relationship. Let me know if you have any more questions. Thanks for the feedback on the channel’s content.
Hey buddy I have a question I have a 2001 ls 430 n it ride's smooth I just notice sometimes going into 3rd it drops down then hesitate then jump speed back up I'm thinking it's a solenoid@@griffzillagarage
@@Tank1684 hey thanks for taking the time to watch the video. Is it kicking any codes? If so, which ones?
hey man, great video, i have a 2003 LS430 with 191k miles, when i shift into drive it takes a minute or 2 to get into drive, sometimes reverse doesnt work, sometimes it does, but once its in gear its fine, no slipping, no shuttering or anything. any thoughts? should i try this solenoid? thank u again man !
also has 2757 code
Hey man. If I was you, this is what I would try. First, I would try adding a bottle of the Lucas stop slip. In addition I would also add the Lucas transmission conditioner. I’ve had amazing results from that on my personal vehicles. It’s not a permanent fix, but it helps buy you some time. You could try the solenoid. But based on the problems you’re having I would be more inclined to just put a complete remanufactured valve body in it. I’ve seen them on eBay with a lifetime guarantee for around $400-$500. Thanks a lot for taking the time to comment and check out my channel. Definitely appreciate if you would subscribe and share it. Please don’t hesitate if you have any other questions.
Hi how are you I have a 06’gs300 shifting 3th and 4th only when moving forward ,reverse is working fine , an advise please
I think your looking at a trans replacement. I wouldn’t waste the time or money with solenoids. Sorry😕. Thanks for checking out the channel.
@@griffzillagarage oky men I hear you thanks for the advice
What’s the part # for this solenoid you did ? I have a 2004 Lexus is300
35280-30050. I recommend just replacing the entire valve body. Please like subscribe and share to help me grow the channel. I hope this helps you out. Please let me know if you have any other questions; and remember I’m the best looking tech that does this stuff! 😂
Three dackity dacks... my type of torque hahaha
Glad you like that. Learned that from my Volvo mentor Fred Gentile. He is a real badass!
should i buy one for $3,000 it needs vvt sensor and shift solenoid has 160,000 miles i’d buy the parts and replace them myself
02 ls430
Hello , my 2004 Lexus Ls 430 sometimes has issues going into reverse, what can I do to fix it? any feedback would be greatly appreciated 🙂
Are you getting any codes? I’ve launched a membership where you can participate in a live chat.
@@griffzillagarage I’m actually gonna go get a reading later on at my local Auto Zone , I will get back to you on the code ASAP
@@griffzillagarage so I got a code p0500 for a speed sensor
@@j0eygee I think you’re looking at a transmission replacement
@@griffzillagarage damn , worse fear confirmed
My 2004 gs300 started having transmission problems it would go into drive reverse and everything but the transmission wouldn’t shift so i changed the transmission fluid, the selenoid harness and the transmission filter now its shifting but it still feels like it struggles a little to shift while driving but after i drove it for a little the check engine light came on and it gave me the p2757 code so i want to know if this could be the problem
It could be. I think the best thing you should do is order a new valve body on eBay that has a lifetime guarantee. I would also substitute a bottle Lucas Transmission stop slip for a quart of the ATF that you usually use. I like the Valvoline max life full synthetic. please like and subscribe and share the channel to help it grow. let me know if you have any other questions.
My 1995 sc400 went into limp mode and has check engine which I can just imagine is the solenoid code where could I find the diagram for the 1995 version sc400?
I’m really sorry I didn’t reply to this sooner. I just saw this while attempting to reply to another one. If you still need this info, please let me know.
Would it be possible if you could send me a link so I can buy this specific part for the P2757 code for 2004 Lexus is300 I looked everywhere and I can’t seem to find this part. Anything would help 🙏🏽
I bought it on eBay. It was a OEM Toyota/Lexus Part. The part number is 35280- 30050. Please like and subscribe and share to help me grow the channel.
Did you ever change the solenoid? If so did it fix the issue? I have an 04 IS300 aswell and I have the P2757 code. 4th hear has some issues engaging when the vehicle is warming up. Once warmed up all is good
I have the P2757 and P0751 codes at the same time what could this be 2004 ls430
@@BipolarRaven I think you’re gonna need a transmission. But if it were my car, I would try a new valve body. You can get new valve bodies on eBay with a lifetime guarantee for around $500.
How do i know wich selenoid is 3rd gear for 2000 lexus gs300
@@abc1234567892226 The proper code should give the manufacturer description of the solenoid. Once you have the name of the solenoid you can figure it out from the parts diagram I show it’s not just called “third gear solenoid”. What code do you have? I would recommend just replacing the entire valve body.
Ok thx.
@@abc1234567892226 you should have two wires going into the ballast. Cut those and tapped into them If you need any more direct help you may want to check out this video.ua-cam.com/users/shortsyPswF6tvxSA?si=9qD4eTtYrZA9Y-rY
Hi Lexus ls 400 98 issue with the gearbox , on parking go forward on neutral going forward and on reverse going forward, what can be ? Thanks
Go to a local parts store and have them scan it. I need to know what codes you have.
@@griffzillagarage Thank you sir
@@simeonpetrov3173 glad I can help. Going to be starting a group/membership that will have live chat and will allow you to ask questions to me in real time. Be on the lookout for a video making that announcement. I would really appreciate if you would like, subscribe, turn on the notifications, and share my channel to help me grow it.
I just bought a 2003 LS430. The transmission is slipping in reverse. Would replacing this solenoid fix the issue or is a rebuild in my future?
This solenoid replacement will probably not fix the slipping in reverse issue. I would highly discourage a rebuild. I would encourage either a junkyard with a warranty or a new unit. But don’t pay anybody to rebuild it. You’ll get screwed. Thanks a lot for checking out the video. Would appreciate if you would subscribe and share of the channel. Trying to get to 1000 subscribers.
Are you getting a check engine light? If so, what codes do you have?
@@griffzillagarage yes. Check engine just came on. Code P2757 torque converter clutch.
@@griffzillagarage I subscribed as soon as I saw your video!
@@Kingmon01 awesome. If that’s the code you got then I would try replacing the solenoid before buying another transmission.
Hey I have a 2005 Ls430 and I got error code p2757 so wats the part number cause I’m seeing two, 35210-50010 and the 35280-30050 which is the one you said you have in the video.
35280-30050. Thanks for watching.
Thanks!!
@@marcussimmons7048 would really appreciate if you liked the channel and told others. If I get to 1000 subscribers, God would get the credit instead paying AI to do it for me; that would be really cool.
Is this the same on the 2004 is300?
I believe so.
Can I get the diagram for 2006 Lexus gs300
What diagram do you want?
@@griffzillagarage I took my Lexus to a shop they told me it was the solenoid that’s why it marked the check engine light. Now after watching your video I see that there maybe multiple different solenoids that the car uses. When I start up my 2006 Lexus gs300 and want to drive off by pressing down on the accelerator it stalls for a few seconds then goes. Would you happen to know which solenoid would that be?
@@jonathan_villanueva1291 what code do you have? Is it the same code from the video? If so, I show what solenoid that is. I recommend you try replacing the valve body. You can get them with all the solenoids and a lifetime guarantee and they come with all the solenoids.
Part # of the shift solenoid
This particular solenoid is for the torque converter lock up control or TCC on the parts diagram it says SLU solenoid. It’s part number is TOYOTA LEXUS PART # 35280-30050. There a couple different “shift” solenoids. I would need the code you have to give you the appropriate solenoid part number application.
This is a 2005 LS430
2004 Lexus gs300
@@maliknolan5711 pay attention to the parts diagram part of the video. I believe your diagram is the first one I show and it starts by showing the applicable model years. But I need the code you have to identify what solenoid you may need. There are 4 “shift” solenoids.
@Griffzilla Garage What if I want to replace all of the shift solenoid
Jason Stateham fix car
That comment is right up there with when a young soccer coach told me I was like Tony Stark. Thanks a lot.