I've seen many video on youtube of people showing how to clean the pipe etc to correct this issue but didn't find any that actually worked. Here is how I fixed mine.
I had to do this cleaning process every 3 months and got tired of it so I drilled bigger holes in the stainless steel mesh filter and since I've done this I haven't had to clean it again. About 1 year ago.
Then most likely your wash motor is weak(circulation motor)and would need to be replaced. The other thing to check is make sure the spray arm holes are clear and not filled with debris.. sometimes you'll see stuff stuck inside some of the holes which will make for poor water pressure on the dishes.
Well, just did all of this and still not cleaning. Seems not pulling in enough water, so now I'm going to watch inlet pump videos.
Excellent video thank you
Thanks man I ignored that there is a filter there beneath the pump wheel.
I had to do this cleaning process every 3 months and got tired of it so I drilled bigger holes in the stainless steel mesh filter and since I've done this I haven't had to clean it again. About 1 year ago.
Thanks for sharing. Still wondering how to take the spin nozzels off the top and middle racks to soak in vinegar.
Mine has plastic clips , pry them open just a little ( gently )and push hard
Truth
Really annoying this model doesn’t have a normal, easy to access filter. We have standing water in ours, do you think this will help that as well?
What if we did all that and it's still not cleaning on the middle and top racks?
Then most likely your wash motor is weak(circulation motor)and would need to be replaced. The other thing to check is make sure the spray arm holes are clear and not filled with debris.. sometimes you'll see stuff stuck inside some of the holes which will make for poor water pressure on the dishes.