FOCUS ST FMIC Install + Snorkel and Test Drive
Вставка
- Опубліковано 5 вер 2024
- Installed the levels performance front mount intercooler on AJ's 2016 Focus ST2 along with the cold air snorkel. The install was fairly easy and this was the first time either of us have done this. SUBSCRIBE for more videos like this!
Music: forrestdel.bandcamp.com
Dude honestly the best intercooler video on UA-cam for the focus st. I thought I watched them all until I double checked your channel. Very informative doing mine tomorrow thank you!
Glad you found it!
Hey man, been a fan of the channel for awhile and recently got my own 2017 magnetic grey ST. Just wanted to say that your channel was a big help in making the choice to get an ST and your content is just fun to watch. Keep up the good work!
Glad to hear it and thank you! Some exciting upgrades coming shortly!
Port & polish intake runners, widen the cylinder bore, install a water/meth injection system, along side a Stg 4 tranny flywheel and clutch plate. Oh dont forget the Limited slip diff.
It was good meeting you two at HF. Nice install video, always liked the Levels FMIC.
Yea that was awesome! Always good to meet fellow ST owners!
Always good stuff! cant wait to see whats coming!
when he said its 61 degrees and he's cold. XD
Move the battery to the trunk it will help the CG , you can use any battery you want and it will leave a huge area to run plumbing etc . A remote battery kit is about $30 to $60 .
Nice. I ordered mine November 2016, got it April 2017. I'm currently full bolt on and stratified tuned. Never see more than a few degrees over ambient. If you don't mind the weight, that's a great intercooler
What a coincidence...my next to mods are going to be exactly this. Superb video, great content as always.
Glad you liked it!
You should come to Scotland to help me with my next mod 👍
On my way!
I'll stick the kettle on
Just a couple of pointers, 1. Never fit a dry o ring, as they can damage easy as when dry because they grip and can roll, you want them to slid in(red rubber grease) 2. If your hoses blow out and suck in, you need to get better reinforced hoses, silicone may look pretty, but proper hoses give better power, it is a bit like why you fit braided brake hoses.
Highly recommend a COBB access port you can monitor what is happening it is very useful
Thanks for doing this video in such a detailed way. It came in very handy when I did my levels FMIC last week!
Glad it helped! I am waiting for my intercooler to come in!
isn't the hair spray to make the hose stick to the tubing once it drys use to do this on my atv handle bar grips.
I was just about to say this, it's used to make sure they don't separate.
Appreciate the view of using ramps. All the videos I been seeing, people are using a lift. (Which I don't have) Its good to see more from the perspective of what I will have to go through when I do it lol.
Looks like a real quality piece, I’ve been debating between this and the depo and will be getting this now
Had the same issue of the active shutters not fitting after installing a Mishimoto FMIC , simply deleted it and no engine codes thrown up so far. Mishimoto Australia had no idea that there was an issue and advised to re-fit shutters after installing the intercooler.....!!!
Great videos!
Just want you (the OP), to understand that intercooler "do not add power", they just keep the stock power there when things heat up such as when temps go over 90°F or after a few mild pulls. Heat soak occurs, that saps power. That's where the intercooler upgrade comes in. Typical power losses in a heat soak is around 8-12 hp & similar tq losses. I also tell people of you want s high performance vehicle do not move to the Phoenix or Palm Springs area. The heat in those cities from late Apr to late Oct is 100-115°F which pushed DA (Density Altitude up towards 5000-6000 ft which will suck up 18-21% of your hp no matter the upgrades. It turns s stock ST's 6.4 sec 0-60 time into 8.2 seconds. When DA is 5300 ft or more it takes a full 2 to 2.2 seconds off 0-60 & 1/4 mi times. Ghats why the 1/4 tracks are closed all summer out there. Ans winter is more like a humid 88° degrees in S. Florida. At least slightly above 1200-1500 ft DA's. Also upgrade the radiator, its fans and a cooler engine temp thermostat in desert climates..
Great job! I have the same intercooler. It did take me a little longer but I did it myself. Not sure what I'm going to upgrade next...can't wait for the next video!
I know this was a while ago but how did this fmic treat you overall?
Dude if you don't already have the intercooler you need to get it I just started doing my channel now and I'm finally putting it blow off valve on and my exhaust I already have the intercooler intake which I'm going back to the regular box what the RS box on top I'm going to modify it I've been talking to Valley crew a little bit cuz I really never done a UA-cam channel but I've had my St now for 3 years and sadly have a lot of miles on it so I've been letting it sit all winter and I went way over my oil change and now I'm fighting carbon build up really bad on my intake valves so I have both catch cans now to install shift bushings shift cable bushings clutch spring from Steeda I mean I've got so much stuff I can't remember all them downpipe exhaust I'm going to try to video tape as much of it as I can and I'm in Ohio rep the Northeast yeah OH LOL...... but good video man there's really nobody out here I know too much I run into people at the track at test and tune once in a while that's it I really don't kick it with anyone too much I seen a guy St of Columbus and he's like the only person I've seen on UA-cam I think but yeah man good video sorry for the big comment
I saw this video ordered the levels intercooler a couple years ago and it never showed 500 bucks gone
What the hell?!
Wondering if there is a comparison, side by side, of stock vs this cooler with regards to oil and water temperature. What kind of results. I live in Florida so I am interested.
Hottest place on Earth is probably where I'm at... 166F in July!
E30/catlessDP will make it that much smoother
Tip: Buy T-bolts or vanjen clamps and don't even have a worry about hairspray ever again. These are what REAL race teams use.. lol. That should be the first mod to any Boosted vehicle. Worm gear clamps are trash.
Great video! Could you guys list the tools needed? Getting ready to install Mountune MRX FMIC and want to make sure I have all necessary tools before I start. Thx
Nice video! Motor mount is next for me and I am considering a shift plate which is supposed to shorten the throws. Just got some pilot super sports and they are amazing.
15:57 Lmao "ughk we lost."
Can you do some POV driving with your Focus ST and some fly bys of your exhaust?
Yep!
Thanks!
Probably gonna be picking up a 2017 ST2 in Kona Blue on Thursday if the deal goes right. It’s gonna be interesting because it’s my first manual, but I know it will be fun. And thanks to you, I know which mods I’m gonna do (Ford catback, Mountune motor mount, and high flow filter) so thanks!
You get the new whip?
+Focus RR No not yet I was sick the last few days, probably this weekend though.
That’s way to long to wait on an intercooler. I made a mistake purchasing this same intercooler.
You compare the OEM FMIC to Levels Performance then compare those two to Altitude Motorworks, there's no comparison. Altitude FMIC FTW!
Those Rhino ramps don't rubb the front spoiler bumper as you go up and down?
Very informative video thank you
You’re welcome!
Always curious to see if this is a modification worth doing. I have read both sides were people say you definitely should and others have said its not really needed. I could never do this myself though took me 3 hours yesterday just to get the turbosmart blow off valve on. lol Keep up the great work!
Mr Pittsburgh if you’re not driving the car hard too often or for long times then probably not needed but if you do you will definitely see the power loss from the heat soak. So it all depends on how you drive
That would make sense. I do daily the car and full throttle it every once in a while when I get a chance but I am not constantly driving it hard so, probably not a mod I need. Thanks for letting me know!
Mr Pittsburgh I don’t drive my car like a stole it, but it gets to 118 in the summer and car drives like a Tercel in that heat. Plus you’re just being nicer to your motor by feeding her cooler air 😎
The blow off valve is tough because you have no room to work. I was lucky because I did the recirc valve with someone who has done it before.
Also true since you are in the city of champions you probably don’t need an upgraded intercooler
What motor mount does he have? You said it was more solid than yours. What do you have vs what does he have?
Thank you
What is the name of the intercooler? Company or website? Also is there a better one out now? It's 2021
What rear motor mount does he have? I’m looking to get one and not sure what one to get.
cpe xflex stage 2, only 1 year late to answer, but there's your answer XD
Can you still daily a focus ST with an aftermarket intercooler
Yea I don’t see why not
thanks for the tip, love the vid btw
What to do to have this characteristic whistle releasing the gas pedal?
Those aggressive eyebrows after the mods. haha
Great video. I'm sure it'll help a lot of people. Two questions. Does Ford make an aftermarket front mount intercooler? And how do you think that would Fair in winter time as I live in Wisconsin
Ford does not make one unfortunately. Mountune would be the closest thing to factory
Appreciate the response
I just got here, did you get any of those sponsers?
I don't know what sponsors I was talking about in this video because it has been years but I am a full time UA-camr now and have several sponsors haha
Can you put the link from where you bought the intercooler?
Awesome
How does he keep that honeycomb grill so clean??
Ordered mine in September and still waiting 😭
what’s the website?
How did you like this fmic?
Dj Y0 Char!ie never received it. Got a Depo Racing intercooler instead
what lights are those? been having a bitch of a time finding decent aftermarket headlight options and those look awesome
Good video man question on the ramps you guys what are they called and do they seem solid ???? Thanks
Jorge Gil Seen these at Walmart think they are called like rhino ramps or something like that for like 55 bucks, I’d still throw some jack stands under for safety because I have seen those things break, after all they are plastic
what size was that intercool? and by whom?
Too bad it weighs so much more ! What Intercooler is the best ? Anyone ?
Can u run a Cobb stage 2 tune on a stock intercooler?
Dorks, seemed like you didn't know much about tools. But least you got it on
Great video! So he said he has the ford tune.. My question is does the tune need to be recalibrated after the intercooler or can I just pretty much get the ford racing tune and start adding bolt ons? Also does it maintain the power train warranty with the ford racing tune?
K24 FB6 there isn’t a way to recalibrate the tune after modifications unfortunately. But the car sure loves that cool air regardless. As far as the powertrain warranty is concerned, since I had it & the exhaust installed at the stealership 😎 the warranty isn’t affected. That FMIC might raise some eyebrows if I take it on for warranty work however 🤔
Thanks for the reply! I just emailed a local dealer that offers ford performance parts, I currently have an mbrp catback (factory dp) exhaust and I wonder if I get this installed would they give me bs on the exhaust causing a problem if I had to do a warranty claim? We’ll see what they say about my exhaust and this performance package. I have the exact car/color btw but mine is a 2017!
The catback exhaust will not void your warranty. The only way to void a warranty is if they can prove a modification you made broke the part you're trying to get warrantied.
K24 FB6 is you’re in the states and have a motor malfunction of some sort, Ford essentially has to prove it was the aftermarket part that caused the issue. The Stealerships get paid to do warranty work, so they will generally go to bat for you to get ford to honor the warranty work. However if Ford DOESNT warranty it, the stealership knows you’re in a pickle and either will pay for the repairs yourself, or trade in a broken car for one on the showroom. So it’s kind of win/win for them
Manuel De Avila yeah I know, I was just saying if something were to fail engine wise, I don’t want them to blame the exhaust since it would be the only “aftermarket” part.
how long does it take to get a levels intercooler... LOL
Did you guys use the stock clamps or did you upgrade to t bolts?
Pretty sure it was stock clamps
Gjeebs Thank you!
Have you considered putting in the quaife lsd for your ST?
Yes I have I just can’t get myself to spend a grand on it
Did u get guys get the engine light after scrapping/disconnecting the AGS/active grill shutter?
I don’t think we did
Gjeebs ok. U posted this video early this year and bow we’re in august. Do u know wether if ur mate got the engine light? Have u checked with him?
Does my 2018 ST have an AGS/active grill shutter ?
Ron Lawson super late but yes. You won’t get a cel with a tune but it looks so much cleaner when you get rid of it even with a stock intercooler
It will throw a soft code unless it is tuned out
Hello what size are these exhaust tips?
4.5 inch
Nice video! Lol you look so angry 😡
Is levels performance a good brand ?
Yep
Seems affordable also
So how much did the stock intercooler weigh?
Never weighed it
@@Gjeebs OK, I looked it up and the stock intercooler appears to be 20 lbs. So most aftermarket intercoolers will add a little weight. The Mishimoto I just ordered will add 10 lbs. I hope it is worth it.
Hope you tuned the car after this!
You upgraded the FMIC but neglected to upgrade the charge pipes? Scratches head.
what motor mount did he use?
ciscoinferno cp-e stage 2
I did the JBR 88 durometer - $100
So now that you have experienced a different rear motor mount CPE Stage flex 2, would you still go with Mountune Or the AJ has ?
Your thoughts please. Thanks
I think AJ has a better motor mount
RGBGFIVE Ok thanks . It is $80 more than the mountune
RGBGFIVE will you replace yours or keep it as is?
I would also like a more in-depth comparison of the two different motor mounts. In terms of vibration, etc. And maybe that tune!
RGBGFIVE after further research and reviews I ended up ordering the Mountune RRM . Less expensive and with a discount it was even better . Let’s see
"Put the power down" #RGBism lol ...also where is that road?
Charles Edwards it’s called Tessmer RD. Essentially 112th ave & Rose Garden
Focus RR thanks man, will venture out there soon. South Mountain is getting stale lol
Don't go under your car without safety glasses. 1 sliver of metal falls and you're fucked!
Dang. 30lb intercooler.. I see people taking out all seats but drivers to lose 100lbs.
First!
Stop frowning so much
"2 girls install an intercooler"
All too true...
Hater
Camera work is awful
Okay
Nice black smoke at start up. That motor won't last long
That happened because I started the car just before that shot and then had the idea of taking the shot. Quick start stops will do that
Haha maybe in your car, piston rings are probably gone. Motor break in is important.
Black smoke on the first startup or even flooring it is normal with EcoBoost engines. Actually, it's common for all direct injected engines.
RangerVt 802 what catalytic converter?
RangerVt 802 your an idiot. Who are you again?