THANK YOU i was looking for a video that shows this gimball with a heavy lens since i wanna see how it goes with a gmaster lens and you re the unique channel that cobers this, great video!
So good details brother. Small problem I am facing. Ronin record button is working by PC remote but I can not see the clip I shot in camera display. To see the clip I shot in camera display I need to remove the cable every time.
This tutorial is fantastic. There are many out there, but this was clear, concise and informative. Would have preferred to know about the firmware update at the start of the video, but other than that - 10/10
@@evermoremedia Hmm, looked at screws on mine and I saw one that would work but the other one was too short I think. It was a bit wobbly if I tried those.
Thank you I have a question regarding the knob of the briefcase handle it keeps rotating without locking . I tried it on both sides it doesn’t lock . Unlike the mobile holder which locks perfectly
can u control the iso/shuter/aperature from the raveneye on the a7iv ,i have the rs2 pro and a7iii but on a7iii its not posible since the camera has software limitation ,im planing to upgrade
I am using a VND from K&F concept. At 17” there is a little bit of vignette if you use the full strength of the VND. It’s a 10 stop nd but I don’t use it past 8 stops and that works perfectly. Any about 8 stops and I start seeing some vignette
@@evermoremedia thank you very much. Could you link me to that one? Create an affli one and I’ll grab. I didn’t see any 10 stop VND just fixed ones. Thanks
Hi I want to get a DJI RS2 for my Sony A7iv however on their website they say it is not compatible? Do you think it would work ok if using the A7iv with the Sony 24-70 2.8 G and the motor to change the zoom instead of the focus? Thank you in advance
Hey! Nice video! I have a7iv and ronin rs2 too.. But I have some issue with front dial when trying to change shutter speed... The numbers jump... Something like 100 goes to 160 directly... Jumping 125, for example... The same with iso and aperture... I tried with two a7iv... Do you have some issue like this? With another cameras, I have no issue...
Excellent video, this is the second time this week your videos have saved me. Thanks so much
Thank you 🙏
great video brother
Thank you
THANK YOU i was looking for a video that shows this gimball with a heavy lens since i wanna see how it goes with a gmaster lens and you re the unique channel that cobers this, great video!
very good explained. Thank you
凄いわかりやすかったです。
素晴らしい動画でした👍
日本からも応援しています。
So good details brother. Small problem I am facing. Ronin record button is working by PC remote but I can not see the clip I shot in camera display. To see the clip I shot in camera display I need to remove the cable every time.
Pls help...how can see the shot clip in camera display itself.
Unfortunately, that’s a known issue. Haven’t found a work around for that yet
@@evermoremedia OK...if found do revert. Thanks for kind response brother.
@@poppyseedfilms will do. Thank you 🙏
Nice tutorial ... thanks a lot :))
That’s some powerful gimbal 👍
Really helpful!
Thank you
This tutorial is fantastic. There are many out there, but this was clear, concise and informative. Would have preferred to know about the firmware update at the start of the video, but other than that - 10/10
thank yo for the feedback. truly appreciated
thank. you!
Where did you get the screws to screw in the RS2 baseplate into the cage like that?
The screws should have come in the box with the rs3. Small rig sells some if you need extras
@@evermoremedia Thanks. You said with the rs3, did you mean the rs2, or you have both?
@@TheCameraProject yeah I have both and they both come with the screws
@@evermoremedia Hmm, looked at screws on mine and I saw one that would work but the other one was too short I think. It was a bit wobbly if I tried those.
Bro you saved my ass!
Thank you
I have a question regarding the knob of the briefcase handle it keeps rotating without locking . I tried it on both sides it doesn’t lock . Unlike the mobile holder which locks perfectly
Yours might be damaged then. It should lock in place. Mine does. It locks the same way as the phone holder.
can u control the iso/shuter/aperature from the raveneye on the a7iv ,i have the rs2 pro and a7iii but on a7iii its not posible since the camera has software limitation ,im planing to upgrade
Yes the controls work on the A7iv
can I use the same set up on a Weebil S?
Yes you can
This works like a charm. Great video and a new subscriber. When you come to Panamá you have a free beer on me. Cheers
Thank you
what vnd or nd filter are you using with that lens? does it have any X or vignette at 17mm not sure which one to get. thanks
I am using a VND from K&F concept. At 17” there is a little bit of vignette if you use the full strength of the VND. It’s a 10 stop nd but I don’t use it past 8 stops and that works perfectly. Any about 8 stops and I start seeing some vignette
@@evermoremedia thank you very much. Could you link me to that one? Create an affli one and I’ll grab. I didn’t see any 10 stop VND just fixed ones. Thanks
geni.us/ch9l7T
Hi I want to get a DJI RS2 for my Sony A7iv however on their website they say it is not compatible?
Do you think it would work ok if using the A7iv with the Sony 24-70 2.8 G and the motor to change the zoom instead of the focus? Thank you in advance
That’s should work fine. I use a similar setup the only difference is the lens.
Hello, I will use a translator, would you have a link to buy a quick release plate from Sony a7iv to weebill 2? Thanks
Hey! Nice video! I have a7iv and ronin rs2 too.. But I have some issue with front dial when trying to change shutter speed... The numbers jump... Something like 100 goes to 160 directly... Jumping 125, for example... The same with iso and aperture... I tried with two a7iv... Do you have some issue like this? With another cameras, I have no issue...
have you tired changing the dial speed? turn the sensitivity of the dial down and that should help
Pls pls help🙏
Go Gimbal guy
Thanks Bryan