You got a great personality and channel. Everything was great, but it would be nice to see more of the actual work and washing too. Thanks again, New subscriber
@@Peloponnesian Hey brother, thank you for reaching out. To be honest, that’s pretty much what my channel is devoted to. I think I now have 800+ videos on the subject. I’m fine to answer general questions, but it can be in-depth. The videos will definitely help. Thanks again.
I know this video was a while ago, but besides turning the pressure down, you can just idle your pressure washer down and get the same result. Just a little easier to do. Have a great day!!
@@TheFreshRinseI’m just starting this just to do my own house. Waiting on my PW. Could you please tell me what chemical I could use to PW my house as I have flower beds/plants that border all around my house. So appreciate
Hey doing my first house wash, il be using 5 gallon buckets, how much bleach I need to put for vinyl. How many gallons of 10%? I know a place here that does fresh batches of 10% So. my question is how many gallons of the 10% do I need in a 5 gallon bucket when washing vinyl house??
I've noticed everyone sprays bleach on the windows and walls both. Isn't there some risk of putting a haze on the glass? I think id be a little paranoid starting out when I first used bleach.
@@BrianAndrewStephens Great question. The risk is only there if the windows are not thoroughly rinsed. From time to time a customer will call back requesting an additional rinse. The addition rinse always removes any hazing
@@TheFreshRinse Thank you Mike. Curious though when you say rinse do you rinse before and after or just after? How does that work. Thanks for the quick reply.
I have 4gpm and 4000 psi and use 10% sh....if I got an xjet (currently use pump sprayer). DO i use a propotioner in the nozzle to control the amount of SH....so that it isnt too strong? Seems like that is what I am reading/understanding
No, if you are using an X-Jet, you will be drawing from a bucket that you will be carrying around with you. Most control the perception by adding 50% water to 50% SH. Fill the bucket half way with SH and Half with water.
I’m beginning to think I should be focusing on an AR 45. I’ve had my head wrapped around a 12 volt but starting to second guess it. I realize one tool can’t do it all but if I’m getting started I’d like to do the right thing the first time.
@@northjerseykevin409 I’ve never been a fan of 12volt for house washing. It just takes too long. On the other hand, it’s cheaper. If the AR45 fits your budget, go for it. I still only downstream for house washing.
I have a question, im in the uk and just started up myself and I have myself a 8gpm 3000psi i want to be able to soft wash but with low pressure to limit over spray, would i be better off with a 12v pump set up? As my 8gpm machine always want to use 8gpm and can only vary the psi/pressure by changing the size orifice hole on my nozzles as mine does not have a pressure adjuster only a relase valve that returns to the tank, thanks for any advice
Adding and unloader (pressure adjuster) is simple and cheap. 12 volting is probably the least efficient way to wash a home. The only thing less efficient would be a pump sprayer.
I cleaned the side of the trailer I rent with rags soaked in chlorox and dish soap. That was last year, and it is still clean. Just gave it a little touch up. I noticed the side that is in the shade had the green mold effect.
@@Critterc100adc1 Only if asked… and then I bring in a window cleaner or refer them to someone. There may be some spotting, it very minimal, generally speaking. Great question.
What do you guess was your gals of SH and time on that one Mike? I did one similar to that today (not quite as bad) with 800 sqft concrete driveway and it took way too long and too much SH I believe at 8gals with post-treat. About 3.5 hrs with extra ness. work in some areas ie. leaves, deck railings, thick mud & a bad drainage issue at front door stoop/walkway… hoping it gets me some referrals tho.
It took about 10 gallons. Mainly because I didn’t want to be patient. I think it would have been much less in warmer weather. Took me just less than an hour.
Just wanted to clarify that you simply applied a SH dilution, and rinsed it off? No actually pressure washing? Can I do that with the “soap” option on a typical 3300 pressure washer?
I love the videos I have a question can I soft wash a roof with a foam cannon as well as driveway’s and houses keep getting mixed answers thanks all the best!!!
Great video sir! I live up here in Canada and what do you recommend for either a home made mixture or product off Amazon?? Appears no scrubbing is necessary? Thanks
Fresh “Rinse”. Not “Prince”. You were close. Vinyl siding covered in organic growth does not need a test spot. It all cleans the same. Test spots are reserved for painted surfaces. Thanks for watching!
Does the solution kill plans below the house tho? I see some rinse the plants with some sort of bleach protector others dont. Not sure if i have to or not
Are there ever times that you tape fans or do you just try to keep from spraying sh in that direction and have customer refrain from using fan for a certain amount of time?
@@TheFreshRinse Hey thanks for the reply my friend your videos are inspiring... I want to start this gig in El Paso Texas but its always 100° around these days what SH percentage do you recommend for this type of heat so I won't damage roofs or exterior walls? or perhaps I don't need SH considering it's more dust than anything
I've recently acquired a pressure washer with a rating of 3400 PSI and a flow rate of 2.6 GPM. My intention is to start offering driveway cleaning services on a smaller scale, more as a side gig rather than a full-fledged business endeavor. I've also invested in a surface cleaner to enhance the efficiency of the cleaning process. I'm curious, do you think that the capabilities of my pressure washer (3400 PSI, 2.6 GPM) are suitable for this kind of work? I'm planning to begin with smaller projects and then potentially expand over time.
Thank you. It’s way too much to answer in a comment. My channel is devoted to showing how I do it. Many hours poured into this info. I really appreciate you watching.
Awesome vid!!! I am looking for the best type of pressure washer to clean my 2 story home and drive way vs paying a company in my area. One that I can safely use to wash my cars too. What is the biggest bang for my buck as far a a brand? Psi/Gpm to look for? I’m not looking to start a business… Thanks!
Simpson pressure washer at Tractor Supply. As a pressure washing contractor, I highly advise paying a professional. But I also have an appreciation for DIY. Good luck! Thanks for watching!
What chemical do you use to quickly eat the mold n algae dirt stains off ? I had a brand I sprayed on and by the time I cranked the machine on it was all running melted down house under a min. I can't find anymore in commercial size.
When you mentioned dialing down the pressure to use a hotter mix, did you adjust the unloader or the revs? I tried pressing the phone on the house, but I guess it only works for you.🤣
You can do either one. When I use the 10gpm machine for downstreaming, I either turn the pressure down to 2500 or so, or rev down the engine. You have to buy my app for $599 to get the phone to wash the house for you. LOL
I recently started my own pressure washing business and I’ve been pressure washing homes and not soft washing. From my under standing soft wash can be much more time efficient so in forth doing more homes at a lower cost but more clients. As I’ve experienced power washing a home took me 4hours how do you still get the same results with soft wash I’ve been looking into it a lots have been saying 3 parts water to one part bleach with some all purpose or soap? Pre wet house. Spray mixture let sit for 10 minutes ? And rinse ? I’m just looking to make sure I get the same results soft washing as pressure washing. Any tips or trips SUPER APPRECIATED just trying to compete with completion:) Thanks in advance Mike
You are definitely on the right track. My channel (and many more) give tricks of the trade in most every video. My greatest advice would be to watch a ton of videos, getting quality education straight from the videos themselves. It’s a draft that I’ve been working to perfect for 9 years. I wish you the very best.
@@TheFreshRinse Have you done a draw test and tested that idea? I would think the lower PSI would proportionally decrease the venturi suction force, so the dilution would essentially remain the same. Then again, I'm not a physicist, I shoot pressured water for a living, so I could be wrong.
@@mayorofbasedville7680 Eventually that would definitely happen. It’s common understanding that it works. I’m not interested enough to test it. Would be interesting however
@@TheFreshRinse Just curious. I have an 8 GPM machine and my biggest gripe is how difficult it is to get a decent downstream mix. I've tried a billion different things with lackluster results. Maybe I'll try throttling down and see if it has an effect.
I have another question I am sure it’s dumb but I bought a predator 4400 psi what is a soft wash and is that power washer able to do that if yes how do??
@@noahstewart3694 I could answer that, but I promise… it would lead to more questions. Not sure that kind of time is available. My greatest suggestion is to find a pressure washing course online. For $300 or so, you’ll basically get a college education. Not a bad deal. You’ll get there… I promise.
I’m more curious on where you purchased the hoodie you have on but the video is awesome I’m just getting started in my pressure washing business so this was helpful
Hi i have a question for you. Do you do a walk around each house before you start spraying any chemicals on a home to make sure everything is safe for washing? Ty
Most Vancouver people aren’t doing 6 houses a day lmao. Completely different markets and the houses are usually packed together, and they aren’t vinyl siding , so it takes a lot longer and more complex
Wow, what a difference. Do you get the same results on wood siding? You say you pre and post treat plants so I assume SH is harmful to plants. What do you use for pre & post treating?
Looking to start my own pressure wash/soft wash business. Already got the ball rolling but would love to speak with someone like you if you have any free time to help guide me a right direction. 🤞
So where would you suggest the best place/website to go to learn more about softwashing and chemicals to use?
You got a great personality and channel. Everything was great, but it would be nice to see more of the actual work and washing too. Thanks again, New subscriber
Thank you my friend. Absolutely. I appreciate you watching!
Beauthiful transformation! Amazing what a little soap and water can do. 😀 Excellent results! ⭐
Thank you very much!
That's not soap and water. That's bleach. Enjoy your ground water afterwards.
dont forget the bleach lol :)
Mike, can you tell me about the soft washing process? How does it work (steps involved)? Does the 2% House SH run through the pump?
@@Peloponnesian Hey brother, thank you for reaching out. To be honest, that’s pretty much what my channel is devoted to. I think I now have 800+ videos on the subject. I’m fine to answer general questions, but it can be in-depth. The videos will definitely help. Thanks again.
I know this video was a while ago, but besides turning the pressure down, you can just idle your pressure washer down and get the same result. Just a little easier to do. Have a great day!!
I agree. And since then, that’s what I do.
You remind me of a guy I used to work with at a magazine sales company back in the day . Great video!
Thank you!!!
That was awesome man I love the 5 second skit and I might have to use it. If you don't mind lol
Would you please share what chemicals did you use to have those amazing results???
Sodium Hypochlorite
@@TheFreshRinseI’m just starting this just to do my own house. Waiting on my PW. Could you please tell me what chemical I could use to PW my house as I have flower beds/plants that border all around my house. So appreciate
cuz how would you clean red mud off white siding? I'm having to wipe it clean after pressure washing it sucks
Aluminum Brightener from NAPA Auto Parts will take it right off. Pump sprayer
Really appreciate your videos and your personality! Keep it fresh brother!! 😎
Thank you George. I appreciate you!
I love your videos and your accent. Much love from New Zealand
@@rowanmuggins3393 Thank you my friend!
Hey doing my first house wash, il be using 5 gallon buckets, how much bleach I need to put for vinyl. How many gallons of 10%? I know a place here that does fresh batches of 10%
So. my question is how many gallons of the 10% do I need in a 5 gallon bucket when washing vinyl house??
50/50
I like your video presentation. It is informative too, at the same time. Thanks a lot for your guidance!
@@elianasmith6330 And I appreciate you
Excuse me, and what type of detergent or chemical did you use to clean the green fungus or mold from the walls?
Sodium Hypochlorite
How do you do 40 foot house with no ladderss
My equipment lets me to 4-5 stories without a ladder. Easily.
Please send me a link to all your soft washing equipment
@@russellvedia1364 What’s it worth to you?
I've noticed everyone sprays bleach on the windows and walls both. Isn't there some risk of putting a haze on the glass? I think id be a little paranoid starting out when I first used bleach.
@@BrianAndrewStephens Great question. The risk is only there if the windows are not thoroughly rinsed. From time to time a customer will call back requesting an additional rinse. The addition rinse always removes any hazing
@@TheFreshRinse Thank you Mike. Curious though when you say rinse do you rinse before and after or just after? How does that work. Thanks for the quick reply.
@@TheFreshRinse ok awesome! Thanks for the reply. I appreciate you brother.
I have 4gpm and 4000 psi and use 10% sh....if I got an xjet (currently use pump sprayer). DO i use a propotioner in the nozzle to control the amount of SH....so that it isnt too strong? Seems like that is what I am reading/understanding
No, if you are using an X-Jet, you will be drawing from a bucket that you will be carrying around with you. Most control the perception by adding 50% water to 50% SH. Fill the bucket half way with SH and Half with water.
I’m beginning to think I should be focusing on an AR 45. I’ve had my head wrapped around a 12 volt but starting to second guess it. I realize one tool can’t do it all but if I’m getting started I’d like to do the right thing the first time.
What’s the downside of my thought process? Thank you. I appreciate your feedback and value your opinion.
@@northjerseykevin409 I’ve never been a fan of 12volt for house washing. It just takes too long. On the other hand, it’s cheaper. If the AR45 fits your budget, go for it. I still only downstream for house washing.
I have a question, im in the uk and just started up myself and I have myself a 8gpm 3000psi i want to be able to soft wash but with low pressure to limit over spray, would i be better off with a 12v pump set up? As my 8gpm machine always want to use 8gpm and can only vary the psi/pressure by changing the size orifice hole on my nozzles as mine does not have a pressure adjuster only a relase valve that returns to the tank, thanks for any advice
Adding and unloader (pressure adjuster) is simple and cheap. 12 volting is probably the least efficient way to wash a home. The only thing less efficient would be a pump sprayer.
I cleaned the side of the trailer I rent with rags soaked in chlorox and dish soap. That was last year, and it is still clean. Just gave it a little touch up. I noticed the side that is in the shade had the green mold effect.
Very nice! Good for you!!!
Do you wash windows after with a WFP or just rinse them off with the 10pm unit
@@KyleZuleger Great question. I do not have a WFP. I just rinse.
Another great one Mike!
Thank you!!!!
My dad was born in Saltville, actually what was called Perryville. I lived in Meadowview growing up.
Very, very cool
Do you clean all of the window exteriors after softwashing? Seems to be a different function even though they might get water streaking.
@@Critterc100adc1 Only if asked… and then I bring in a window cleaner or refer them to someone. There may be some spotting, it very minimal, generally speaking. Great question.
LOVE the company name!! Great job!
@@larekus100 Thank you
Great video. Do you spray water, chemical and then rinse with water. Or is it just chemical then a good rinse?
Chen, rinse. Thank you for watching!
What do you guess was your gals of SH and time on that one Mike?
I did one similar to that today (not quite as bad) with 800 sqft concrete driveway and it took way too long and too much SH I believe at 8gals with post-treat. About 3.5 hrs with extra ness. work in some areas ie. leaves, deck railings, thick mud & a bad drainage issue at front door stoop/walkway… hoping it gets me some referrals tho.
It took about 10 gallons. Mainly because I didn’t want to be patient. I think it would have been much less in warmer weather. Took me just less than an hour.
@@TheFreshRinse How many houses a week?
@@MikalBrowning 4-6 a day
What is SH?
Sodium hypochlorite aka bleach
What kind of wand are you using for that first rinse?
Thank you for watching. Suttner ST2700
Just wanted to clarify that you simply applied a SH dilution, and rinsed it off? No actually pressure washing? Can I do that with the “soap” option on a typical 3300 pressure washer?
Exactly. And yes you can, on a one story home. Use the black tip that came with your machine to apply the solution.
@TheFreshRinse should you predillute the SH or will the machine mix it with enough water ? Thanks
Add it to your washer tank full strength it becomes diluted when it mixes with the water as you spray.
I love the videos I have a question can I soft wash a roof with a foam cannon as well as driveway’s and houses keep getting mixed answers thanks all the best!!!
You can, but depending on the severity of the algae buildup, it may not be strong enough
Great video sir! I live up here in Canada and what do you recommend for either a home made mixture or product off Amazon?? Appears no scrubbing is necessary? Thanks
@@loneranger8293 You need pool Chlorine.
@@TheFreshRinse good to know. Thanks!
Fresh prince how come you dont spot test before spraying? I want to learn from thee
Fresh “Rinse”. Not “Prince”. You were close.
Vinyl siding covered in organic growth does not need a test spot. It all cleans the same. Test spots are reserved for painted surfaces.
Thanks for watching!
Was there no taping off electrical boxes?
Yes sir. Each time
What type of wand is that you are using
Suttner ST2700
How do you keep the chemicals from killing grass while soft washing. I’m building a plan to start a business but I have some preconceived cautions
Pre rinse and post rinse
Does the solution kill plans below the house tho? I see some rinse the plants with some sort of bleach protector others dont. Not sure if i have to or not
I do rinse sometimes with a neutralizer. But pre-rinsing and post rinsing will usually do the trick
You pre rinsed 1st?
The plants before and after.
@The Fresh Rinse gotcha so it's not necessary to wet the house 1st gotcha 👌
@@2alawabidingcitzen Right.
Are there ever times that you tape fans or do you just try to keep from spraying sh in that direction and have customer refrain from using fan for a certain amount of time?
The latter. I wash them all, then let the customer know to keep them turned off for 24 hours or so.
what about opened electrical outlets, do you cover those?
Yes sir
@@TheFreshRinse Hey thanks for the reply my friend your videos are inspiring... I want to start this gig in El Paso Texas but its always 100° around these days what SH percentage do you recommend for this type of heat so I won't damage roofs or exterior walls? or perhaps I don't need SH considering it's more dust than anything
@@jamiemorales2022 Just cover all your bases by watering immediate grass and all vegetation before and after.
@@TheFreshRinse last question please:: What % of SH do you recommend for a roof, house, and concrete driveway on a very hot day at 100°
@@jamiemorales2022 Most roofs are going to require 4% or better. 60/40 water/SH
What is the SH you refer to? Trying to clean mildew from 2nd story on my home. Thanks
Sodium Hypochlorite
@@TheFreshRinse thanks
I've recently acquired a pressure washer with a rating of 3400 PSI and a flow rate of 2.6 GPM. My intention is to start offering driveway cleaning services on a smaller scale, more as a side gig rather than a full-fledged business endeavor. I've also invested in a surface cleaner to enhance the efficiency of the cleaning process. I'm curious, do you think that the capabilities of my pressure washer (3400 PSI, 2.6 GPM) are suitable for this kind of work? I'm planning to begin with smaller projects and then potentially expand over time.
Great question. What size is your surface cleaner?
18 In@@TheFreshRinse
I bought it on sale. @@TheFreshRinse
Hey Mr. Mike. Can you point me in the right direction on a small starter system? Thanks Regards:Joel in North Carolina
Sherwin Williams has an amazing 4 GPM machine. That’s how I got my start.
I love those really dirty house's, it's so satisfying to clean them, I love it.
Great job 😎
Yes Sale. Very!
I wanna start this as my own little business what’s the main things I need other than the pressure washer to start off wit
A ladder. And lots of patience and ambition.
What exactly does the phone app do?
It’s
A
Joke
How much sh in a 5gal bucket with surfactant using an xjet with no proportioner
50/50
Great video mike
Thank you my friend
Outstanding video! I am from Puerto Rico and need to do that…any recommendations on what chemicals to use? Thanks and keep rocking on!
Thank you. It’s way too much to answer in a comment. My channel is devoted to showing how I do it. Many hours poured into this info. I really appreciate you watching.
Awesome vid!!!
I am looking for the best type of pressure washer to clean my 2 story home and drive way vs paying a company in my area. One that I can safely use to wash my cars too. What is the biggest bang for my buck as far a a brand? Psi/Gpm to look for? I’m not looking to start a business… Thanks!
Simpson pressure washer at Tractor Supply. As a pressure washing contractor, I highly advise paying a professional. But I also have an appreciation for DIY. Good luck! Thanks for watching!
@@TheFreshRinse thanks for the response. It seems to be varying types. Not sure of the psi and gpm…
Hey. What pressure wash machine do you use?
Honda iGX800
Is a 2500 psi electric machine sufficient? Or i need more power? 😅
You need a 4 GPM machine at the minimum
Great job. keep producing, you’re a star.
Thank you!
What chemical do you use to quickly eat the mold n algae dirt stains off ? I had a brand I sprayed on and by the time I cranked the machine on it was all running melted down house under a min. I can't find anymore in commercial size.
Pool shock
@@TheFreshRinse Is it not hazardous to plants?
What do you do to protect plants? Prewater plants and surrounding area really good?
Good work and info man
Thank you sir
how many gallons of SH roughly used to clean a house?
Usually 5-6
What soap are you using?
@@Gettin_chunky Sodium Hypochlorite
When you mentioned dialing down the pressure to use a hotter mix, did you adjust the unloader or the revs? I tried pressing the phone on the house, but I guess it only works for you.🤣
You can do either one. When I use the 10gpm machine for downstreaming, I either turn the pressure down to 2500 or so, or rev down the engine.
You have to buy my app for $599 to get the phone to wash the house for you. LOL
@@TheFreshRinse thank you!
Nice job Mike!
Thank you sir
My son has been watching you and learning a bunch. Keep up the great work. 👍
Thank you so much buddy. I’m glad to help!
@TheFreshRinse Is their anyway you can get me started in right direction with a small set up? Thanks Brother Mike!
@@joeygriffith8977 Sherwin Williams is the best place to get a nice 4gpm machine. Then get a trailer, buffer tank and more hose
I don't rinse before second sh application? Just apply it.
You’re prolly doing it right.
You did not tape or cover any of the light fixtures, electric outlets,or key holes? I thought that was supposed to be standard practice?
Everything was turned off. I should have taped key holes. I need to do better.
Gotta get that app!! Searching now..says they're sold out! 😂. Welp back to it.
Keep trying. LOL Thanks for watching!
What kind of sprayer/ gun are you using?..Thanks
I use the Suttner ST2700. Thank you for watching
I recently started my own pressure washing business and I’ve been pressure washing homes and not soft washing. From my under standing soft wash can be much more time efficient so in forth doing more homes at a lower cost but more clients. As I’ve experienced power washing a home took me 4hours how do you still get the same results with soft wash I’ve been looking into it a lots have been saying 3 parts water to one part bleach with some all purpose or soap? Pre wet house.
Spray mixture let sit for 10 minutes ? And rinse ?
I’m just looking to make sure I get the same results soft washing as pressure washing.
Any tips or trips SUPER APPRECIATED just trying to compete with completion:)
Thanks in advance Mike
You are definitely on the right track. My channel (and many more) give tricks of the trade in most every video. My greatest advice would be to watch a ton of videos, getting quality education straight from the videos themselves. It’s a draft that I’ve been working to perfect for 9 years. I wish you the very best.
will pressure washing damage or weaken old vinyl siding?
Pressure washing can. Soft washing will not.
3% is good for most houses ? is it good for gutter stains
3% is way too much. 1% is more than adequate.
OK Thank you!! How about gutter stains what do u use
Does Ohio require any permits for power washing? Asking for a friend.
Tell your friend that Ohio does not require special permits
@@TheFreshRinse
My friend will be happy to know.
Hey 👋 what kind a soap you use ? Thank you 🙏
Hey brother. I use Eleminator
And you sale it ?! Or where I can get it ?!
Thank you
@@DirtRescue Southside Equipment sales Eleminator
Lowering the PSI will make a downstream mix hotter?
It will provide less water, which in turn dilutes the mix less. But not by much.
@@TheFreshRinse Have you done a draw test and tested that idea? I would think the lower PSI would proportionally decrease the venturi suction force, so the dilution would essentially remain the same. Then again, I'm not a physicist, I shoot pressured water for a living, so I could be wrong.
@@mayorofbasedville7680 Eventually that would definitely happen. It’s common understanding that it works. I’m not interested enough to test it. Would be interesting however
@@TheFreshRinse Just curious. I have an 8 GPM machine and my biggest gripe is how difficult it is to get a decent downstream mix. I've tried a billion different things with lackluster results. Maybe I'll try throttling down and see if it has an effect.
@@mayorofbasedville7680 I’m not sure what you mean. It doesn’t clean? What are you comparing it to?
where are your shirts from?
Www.fin-print.com
Mike what are you using to clean the house with?? I am new to the business and trying to learn as much as I can as I go along
No problem. Sodium Hypochlorite. Also known as chlorine.
I have another question I am sure it’s dumb but I bought a predator 4400 psi what is a soft wash and is that power washer able to do that if yes how do??
@@noahstewart3694 I could answer that, but I promise… it would lead to more questions. Not sure that kind of time is available. My greatest suggestion is to find a pressure washing course online. For $300 or so, you’ll basically get a college education. Not a bad deal. You’ll get there… I promise.
Website for class
@@SAandBeyond powerwashacademy.com/
Wow! Nice work!
Thank you!!!!
What spray gun is that your using in the beginning
Suttner ST 2700
@@TheFreshRinse where could I buy one?
@@dustinjohnson2116 I think eBay
What downstream injector are you using? Love the videos
Thank you. 2.1
I’m more curious on where you purchased the hoodie you have on but the video is awesome I’m just getting started in my pressure washing business so this was helpful
www.fin-print.com
Are you using a garden house. Or pressure washer
It’s called “soft Wash”.
Can you do a video on how you set up your ratios and mix?
I can certainly add that to my list. Thanks!
do you use a surfactant with your SH?
No sir
Great job brother
Thank you!
I work up Horsham PA, just started pressure washing. Any tips?
Gew Wash has it on lock over there!
what nozzle are you using
M5 Twist
What cleaner?
Sodium Hypochlorite
What kind of chemicals you used to get rid of the dirt??? I need to buy some
Bleach and soap
@@TheFreshRinse Thanks is it pool bleach. What is the ratio.
How did you get the job done without covering the Verizon boxes and what not ??
I just wash very carefully. If things look sketchy, I’ll cover them.
Classic as always my friend 🤪. Just out of curiosity, do you ever consider an xjet in scenarios like that?
Thank you sir. No, downstreaming usually gets the job done.
Do you use your pressure washer to soft wash or do you use a pump?
I wash houses with my pressure washer. I wash roofs with a 12 volt pump.
@@TheFreshRinse awesome Thankyou 👍
Hi i have a question for you. Do you do a walk around each house before you start spraying any chemicals on a home to make sure everything is safe for washing? Ty
I do not. I just try to look carefully as I go. If I’m doing property protection, I do it as I go
I'd tape off the electrical and the keyholes bro
You caught that, didn’t you?
@@TheFreshRinse yessir. Love your channel
@@ScottCleansIt Thank you. I’m super grateful.
What kind of soap is he using?
Check all the other comments. Seems to be the most frequently asked question
@@TheFreshRinse ............and how did get and apply that soap on the house? Please....
Only $500? Up here in Vancouver, BC that job would’ve needed you $1300! Great video!
Worth every Penny! LOL
@Bilo Bath for a house that size?
Most Vancouver people aren’t doing 6 houses a day lmao. Completely different markets and the houses are usually packed together, and they aren’t vinyl siding , so it takes a lot longer and more complex
@@seattleprowash5464 And, the $500 is for the app. LOL
What cleaner do you use ? Any other tips for a newbie wanting to start ?
Is the SH bad for grass/ plants?
Yes. Always pretreat and post treat
Where can I find SH in bulk?
I get mine from a local chemical plant. You can buy it at a pool store as chlorine.
Do you get up there on a ladder for the attic/second story or is this all done from the ground? (Safety concern for upcoming project)
Many times I have to get on a ladder
Do you do jobs on Saturday and Sunday?
@@calklobuchar Only by request. It’s extremely rare
Do you wash the plants while downstreaming?
I pre and post treat all plant life.
What ratio where you using?
The 2.1 downstream injector shoots about 1%. I do not dilute the SH
I use a 2.1 Injector. So I’m shooting around 1%
Wow, what a difference. Do you get the same results on wood siding? You say you pre and post treat plants so I assume SH is harmful to plants. What do you use for pre & post treating?
Wood can be different. I don’t wash much wood. Water for pre and post treatment
What percentage was ur house mix?
About 1% downstream
Looking to start my own pressure wash/soft wash business. Already got the ball rolling but would love to speak with someone like you if you have any free time to help guide me a right direction. 🤞