Too Much Power? DEWALT ATOMIC Compact Series 20V Brushless 1/2" Drill/Driver DCD794 DCD799
Вставка
- Опубліковано 20 бер 2023
- → Best DCD794 deal is the kit for $30 more than the Bare Tool - www.homedepot.com/s/dcd794?NC...
→ Oddly the DCD799 kit is $40 more than the Bare Tool - www.homedepot.com/s/dcd799?NC...
------------------------------------------------------------
Failure Video - • Gearbox Issue On Our D...
------------------------------------------------------------
In My Opinion, The Home Depot Exclusive Dewalt DCD794 and DCD799 are some of the most powerful compact drills we have ever used. It is sad we had a failure on our first DCD794, but this video provides serious redemption for those products. The ONLY miss for many people will be the lower RPM of these drills. On high the max RPM is 1,650 and on low, it is 450. Most battery-operated drills run at 2,000 RPM on high and 550 on low. The lower RPM might equate to the power these drills are able to provide.
The DEWALT Atomic drills are the shortest 20-volt drills that DEWALT currently makes. They provide a small footprint with great ergonomics and in some cases provide enough power that the user might want a side handle!
Both the DEWALT DCD794 and DCD799 are very impressive drills. I feel most people would enjoy using a nice, small drill when completing daily tasks. - Навчання та стиль
Great follow-up video on this series. Becoming more compact every Gen. My 796 continues to serve me well under regular DIY conditions. Though I have asked it to do 1" in concrete and did it. If I were starting out, I'd have confidence in this drill.
People complaining about the vents of a drill being covered up sound like Apple with the whole "you're holding it wrong" thing. It's pretty much a given that you use a drill with both hands. Lots of people have large hands and lots of people wear heavy gloves, while the drills are only getting smaller. If a drill's performance is in any way affected by how I'm holding it then as far as I'm concerned it's a bad design. If anything I'd love to see our host cover them up as much as he can so if there are inherent issues with overheating we'd be alerted.
If you need a compact drill/driver and you're looking at DeWalt I highly suggest the DCD800. It's the non-hammer version of the DCD805. If you need the hammer function then you need a bigger drill anyway.
Amen... hammer drills are often useless for concrete used in modern buildings, get the smaller DCD800 as a drill driver and then get an SDS rotary hammer for concrete, even the cheapest crap will do better than a DCD805.
Ive consolidated all of my carpentry tools to dewalt flex volt.
I do a lot of homeowner stuff with them , cabinet shop work , custom mini cabin builds and commercial showroom build outs.
Dewalt just never disappoints but I am interested in a stubby hammer drill for right space work in the showrooms.
Many of them have poured concrete ceiling in high rises that require steel studs to be attached to concrete ceilings.
We usually use corded Bosch hammer drills for this but we have used cordless dewalt hammer drills successfully but never a compact hammer drill.
Could have used one many times.
I’m not a Dewalt guy but have to give credit in the compact game their crushing!
DCD794 Vs. DCD800 - - - DCD799 Vs. DCD805 These are the comparisons I would personally like to see.
Different class of drill...pointless
@@garthqueen so what is the difference between the 799 and 805? sorry i'm new to this..
@@TheAhhleena The 799 is the hammer drill version of the 794,which is the lower powered,lower speed Atomic model.The 805 is the hammer version of the 800 drill driver,which are premium drills delivering 90nm of torque...almost that of the DCD996,but in a much more compact form.
@@garthqueen but how do the specs of the 799 compare to the 805? I know it’s smaller and lighter, but is it less powerful?
Thanks Brian, I don’t like the plastic Chuck surrounds but love the compact size. Would you choose the 799 over the 805 for your choice of compact Dewalt hammer drill?
Bought the 794 last spring or so, have had no problems at all. I don't use it everyday all day, it's in my truck to use when needed. Bought it at home depot in canada, $69.00, that's like $50.00 us, drill, 1, 1.3 battery, charger and bag........
Thanks again for another thorough video.
Yellow n black have rarely let me down and when they have, it was generally simply from pushing them too far when far too hot 🇦🇺
Unfortunately our local dealers only supply made in🇨🇳 👎so
.... I do always import my tools from 🇺🇸 to get the 🇲🇽 made models...for some reason they just 'feel/sound' better imo.
In fact, we don't even have the DCD800 in ANY store in 🇦🇺, God bless USPS🍒
Keep up the gr8 work
I have an 18v Makita and 12V Milwaukee. I never use the larger Makita so far.
I know my DCD777 beats the DCD708 atomic, despite having the same specs.
I had considered getting the 791 because it seems like the bigger body drills don’t get as hot.
Isn't the 799 rated at up to 552 UWO while the 794 is up to 404 UWO? I guess that's why the hammerdrill performs slightly better than the drill/driver.
Will you compare to the latest xr drills
How does the 799 compare to the 805?
I'm glad to see that it was just a fluke.
It wasn't a fluke this guy does honest testing a lot of these tool testers are dishonest and are doing it to get free tools, mostly from the Chinese owned Milwaukee and Flex
Wow love the vice you've got!!!!!!!
It's called a jawhorse it's a sawhorse that clamps
Thanks for the informative video. Dealt seems to have a glut of powerful compact drills these days. Another comparison video would be great. Like how do these compare to the 805?
805 doubles them 😂😂
I think the new Atomic Hammerdrill compares more favorably with the previous XR compact hammerdrill (DCD796)
I'm trying to figure out the same. how does the 805 compare to the 799
I would like to see the little one used to make holes in steel,
Im pretty sure they just make these for compact use, not so much for heard work, cabinets and such
Id use one maybe to drill with some short brill bits if it fit any where. 👍
I work on cars
Just bought it to hang my led lights and other stuff around the crib and it’s nice dude
It really does have power and I only paid $100 battery drill and charger included
I don't have a ton of corded tools, but most of them are Dewalt. At the same time I have an absurd amount of cordless tools from several different battery systems. How many of my cordless tools are Dewalt? None. And that's my confidence level.
Showing your ignorance there. As a contractor for 10 years I have 90% dewalt cordless, in 10 years I've had 1 impact driver, 1 battery and 1 oscillating tool die out of 30 batteries, 6 impact drivers and 4 oscillating tools that's a very good reliability rating considering I used these tools a lot in all weathers. I get at least 5 years out of a hand tool with very heavy use.
@@vontrap6942 When you spread out your usage over so many similar tools and still end up with a 20% failure rate (2 out of 10 tools failed) then it's either that the tools are bad or your math is bad. Paying Makita prices for a rebadged Black & Decker is a lot more ignorant than anything I've said.
DCD793 - this is an update of what model?
do these compacts allow a extented handle accessory? looks ready for wrist pain!!!!
You just get used to the "De-wobble" after a while; out of the box I know pretty much all Dewalt drills have the run-off.
My new 794 failed just like yours in the first video. DeWalt is sending me a replacement.
Follow up: I received my replacement 794 from DeWalt today. I ran it through its paces and it’s functioning normally. Good on DeWalt for the excellent CS.
@@keith7630nice to hear
Wondering if you’re gonna do a comparison between dcd793 & dcd798?
They are the same drills as these, just sold at a different store.
I use a sas max 16 inch 11/4 inch bit in my Ryobi HP hammer drill, works pretty damn good I heard they have one of the best hammer functions
If your looking for something more heavy duty and similar price point I'd suggest the DCD805, got mine tool only for $119 CAD
If you do something more heavy duty you would probably go Milwaukee, Makita or Bosch instead. Dewalt is great for amateurs though
@@aliancemdWhat would you get in Milwaukee, Makita or Bosch at a similar price that would be as good as these Dewalt drills 🧐
I'm surprised these small drills do that good.
Hello sir ☺️
I was happy to watch this video. I am confused about buying between three models, and I do not know which one is a new product As of writing these lines for you from this series. Please help, of course, for housework, which sometimes requires hard work.
DCD805&
DCD794&
DCD799
Why’re you testing a hammer drill with spade bits on wood. It’s not even made for that. You can use an impact for that. Hammer drills are for masonry and concrete, test it there.
جيده لمن يريد شراء مثقاب جديد اما اذا كنت تملك مثقاب مسبقًا فلن تحتاج الى تحديثه
1/2 inch drill bit killed mine today right out of the box 794 shoulda watched this first lol
you like that milwaukee hoodie? im thinking about getting one
I swear I decide on a platform after ditching DeWalt when they want lithium fully and now they're stepping a game of
My DCD800 failed on its first job, look exactly like the DCD794 did to you
My replacement has been rock solid.
@@WorkshopAddict Yea ill get it replaced
@@WorkshopAddict I took it apart just to see what happened and I could send a few pics of the clutch area provided I have a way to do that
Just sayin, you should learn to hold your drill at the bottom by the battery before you end up breaking your wrist.
5.19.23
Black and Gold made to fold?
it's yellow, not gold, but I know milwaukee fans struggle with the basics :d
Wasted wood 😔
nothing can bit milwaukee heavy duty drills
1st
Dewalt has been killing it with their new tools! Except.... their impacts still suck! The new xr they released is the biggest dissapointment! Their only decent impact is the atomic
The Dewalt 840 has a more solid feel than the atomic impact. Your welcome.