Chrome Vinyl Wrap Techniques
Вставка
- Опубліковано 5 гру 2022
- Chrome vinyl is always a challenge. This type of vinyl wrap is vulnerable to permanent damage if the film is either creased, heated or stretched even slightly too much and it will not recover. It is also very limiting in how much you can stretch it. Learn how to wrap a door by using this video to show you techniques.
If you're looking to learn how to vinyl wrap on a professional level and make money doing it then check out my website www.ckwraps.com/ sign up and get one month free! There are dozens of chrome wrap training videos as well as a full Beginner 101 section. I'm also adding my in person vinyl wrap training as a course on the website and I respond to all questions in the open Forum section.
For information on PPF workshops email nav@ckwraps.com
Sign up for in person color change workshops where class sizes are limited to 6 people. The smaller class sizes allow me to give each student extra attention along with knowledge and experience.
Certified Training visit www.vvividhq.com/get-certified
Email nav@ckwraps.com to order Vvivid Vinyl and SAVE $$
Nav also started his own UA-cam channel check it out here.
/ @navsfinance
Pickup all your vinyl wrap related products from my shop here ckwraps.com/shop - Авто та транспорт
I did this guy’s vinyl wrap certificate,
Landed my dream job, starting to live my dream, thank you ck !!
Your class covered everything I needed to know and then some , it also gave me the confidence I needed. I recommend this guy’s class all the way!!
(Grandmaster of vinyl wrap 🥋)
It's really great to hear that you're doing well Daniel. I truly hope for all the best for you.
It can be tough out here as business goes up and down
@CKWraps @CK Wraps 26:48 hahaha. Sorry if I didn't compromise the quality of my work, while providing you with endless amounts of knowledge and entertainment, for no other reason than pure selflessness. You rock, man! Love the videos!
CK, you had to be a surgeon in a past life. I really enjoy your meticulous detail to every edge, key hole and corner. Wish you the best in 2023 and I can't wait for the next video.
You my friend are the Bob Ross of wrap! I just finished the build on my 98' Firebird and I'm exited to try my hand at wrap. Appreciate the hours of knowledge you share! Can't wait to learn more from you.
This is the exact color I was looking for.
I’ve watched so many of your videos and it’s given me the confidence to actually wrap my car in the spring
I like his honesty about how difficult it is and stressful. Would like to see more close ups.
Wish he would do one on Jeep door handles if they can be wrapped with the weird recess.
Thanks!
i love you videos man , coz u don"t cut or make any changes on it , and u show everything , mistakes and how to fix it , much respect from Tunisia Man
Amazing you were able to work those wrinkles without heat bro. Bravo! Gonna use my spray way more after seeing this
That colour is Gorgeous
Appreciate the tips. The inlays on the fender visible at the beginning are helpful, especially if you haven't wrapped a third generation NSX. Thank you.
thanks that's a great explanation of the how to
First video I ever watched of yours, it's definitely alot easier with 2 people.
Holy Cow!! Awesome job!!
Good job bro, Amazing color! Ciao from Sardinia island
great job!!!!
great content! I need to get into a class soon before spring in BC. id like to learn about post heating. stretching over corners and how much extra heat radius can help with getting less fade/colour loss. I see ppl using torches and curious of the post work and finishing tips. got some vvivid on the way to practice
Amazing work! Awesome color! I have a 2010 Lexus LS460, wanted to try wrapping for the first time. What would you say the hardest parts to wrap are? Also, gloss vinyl vs satin or does it not matter?
Wow amazing.. I like it
Hi I have watched a lot of your videos they are great stuff and tried searching your channel, I'm wrapping my own car but in your videos I can't find a video on wrapping a door with a full top colour frame around the window I'm just wondering if you have any and do you have any of wrapping a smaller car I have an Opel Corsa c thanks in advance and your work is awesome
Hi I'm new to your channel I learned a lot. I like your channel you do some awesome work. Can you show us a very good close up when you cut the vinyl let say between the hood and the fenders. Do you leave a bit on the edge or do you cut right at the edge then use the heat gun to place it. (seal it).
One thing I'm curious about is how you manage client's expectations given the material's limitations.
As installers we will usually notice the really small details which are commonly not seen by untrained eyes. Letting the customer know that certain films have greater limitations will show them that you're knowledgeable. It's never a good thing to pretend that something will be better than it is. Most people appreciate the honesty and it gives them the opportunity to make a sound decision.
A poet ad didn't even well you get it.
What do you or can you actually do against the film being static after pulling the backing and / or protective cap?
Bro what is the optimal temperature for wraping ?
Thanks.
I decided to take on wrapping my car after watching your vids - so far have done two panels (right fender and hood) okay. However, what I have found is that the last 5% of the wrap bunches up real bad w/ fingers and is hard to squeegee out. Do you have any tips or know what I am doing wrong?
Nice
I’ve been wrapping for about 3 years now and I tried chrome once and it was extremely difficult, does the tack reducer help ? What brand do you recommend?
I’m planning on doing 2 type vynol wrap - Which will overall be 2-tone.
Bottom will be Chrome vynol wrap.
Can, will Chrome vynol wrap cover other good / new vynol wrap?
Top is 1 color.
Bottom will be all chrome
Saludo desde PR 🇵🇷🇵🇷🇵🇷💪🏽💪🏽💪🏽🔥🔥🔥❤️❤️❤️
Do you have offline training course?
What storage rack do you use that measures the vinyl?
can these techniques be used for a neo chrome wrap as well?
what brand is that blue wrap is ?
Never going to do this but gonna watch the whole thing anyway just to know how... just in case😂
Looks great, sniff sniff. lol.
Hi! What size I need for audi a4 b8 for a bonnet? Thanks
Can we wrap vinyl in cold weather?
What's the ideal heat gun temperature? Does it depend on what kind of wrap you use? Thanks!
It varies from different brands & finishes. You can also read the way the Vinyl Reacts to the heat such as creases, smoothing, Touch and etc. Good indicators as well.
I have my heat gun set to 1,000F which is the hottest setting on mine. Then I use distance to control the heat against the film.
@@CKWraps what type/ brand of heat gun is it?
I wonder about the insurance for the wrap shop. Do you buy any insurance for your shop? And what is the name of policy if you buy the insurance? What are things need have had on the policy? Appreciated for your hard work!
Yes I have insurance so that it covers the contents of the shop but also covers me driving customer vehicles. Insurers will vary depending on what country, city and location you are.
@@CKWraps thank you Sir so much.
Have you trained enough people to consider opening up business somewhere else? Like coming to the states to a popular area that welcomes wraps. I would be very interested in you coming through and wrapping my vehicle
I was months away from moving to the states and then covid stopped the world. I'm still planning to come down and my immigration lawyer has everything in order but it will be a couple of years. We just had twin boys who are 3 months old and a 16 month old girl. It's difficult to move right now.
Hello. Do you use a primer on the folds?
I never use primer, it's more for beginners but I always recommend not using it due to the after effect when it comes time for removal
@@CKWraps Thanks for the answer.
why not do the front of the door closed and the back of it with the door open after u cut the front out?
With this type of film you really want to avoid stretching from a point on the inside of the panel that's being wrapped due to getting a line in the film. It's better to pull it tightly across as a whole to try avoiding any lines or marks in the film
❤helpful
Can you do a tutorial for red next?
it’s the same thing as long as it’s the same brand and type of vinyl just a different color
@@zaindrozal6192 You're talking to a mentally impaired person, obviously. So be careful.
@@tadzhiks evidently lmao
Glad I'm not the only one that
stresses and procastinates. I always say, ya I can do that. Then I say, why am I doing this.
I ask myself the same question all the time. But, I do it cause I love it
no IR heater?
For what?
Wow that looks hard, I don’t think this is a diy job.
Why do I get a
What about using lifts and platforms ?
Yup. Something is very “off” with this fellow. Just sayin’
Can you do a whole video on CLEANING? IT seems to me that 80% of wrapping is cleaning, but you only show the final clean with isopropyl. This is so important, and it needs to be done systematically. Wrapping itself is a doddle compared to cleaning. I mean I guess you have guys that do that, but most of us dont have that luxury.
Wash the car, iron decon, clay bar , rinse it, dry it. Isopropyl wipe everything 2 times especially the edges