Це відео не доступне.
Перепрошуємо.
💧 How to keep Iron/Sulfer Filters Clean and Running
Вставка
- Опубліковано 23 чер 2024
- Air over media iron filters will work great for a while. Eventually they will become fouled with oxidized iron and will no longer work as well. In this video I will show you two modifications to make these iron and sulfur filters work better. More important, I will show you the one easy step that has kept our iron filters working for years.
I have a recommendation that you may find useful and worthwhile. I recommend the channel Ray Builds Cool Stuff. He is off-grid in an arid climate. His episode check out this 19-year-old rainwater collection system video is a gold mine on water filtration and sterilization. He also has a lot of info on building solar battery backups. This is information that when looking back seems to be common sense but was hidden.
@@martyvanord984 Thanks. I will check it out. Sounds right up my alley 👍
WOW!!!--if you can treat water that bad and that volume, then just treating a house should be easy!
@@martyvanord984From the well water goes to a cistern. Then the house has a water softener. The iron filters help a lot, they just require regular maintenance. There are other systems, like peroxide. The air filters have worked pretty good and air is free. 👍 Thanks for watching.
@@martyvanord984 Also when running a lot of water through filling stock tanks, water does not have enough contact time to remove all iron. It does get rid of the smell.
When this well is just sending water to the two ranch houses, it works good. The iron filters help out the water softeners. It is just too much iron for the softeners.
@@thewindmillgarden my research says that peroxide is the very best but as you say can get expensive. Those who sell peroxide systems say that air over will gum up and quit working. Looks like you have it under control by doing a solution clean and soak.
@@martyvanord984 That is true. Air over is not maintenance free. Takes more time and energy to run them. I think that the deep clean with Iron Out is key. It’s a trade off. A peroxide system in a home might use $300.00 in peroxide a year. Lower maintenance. The Air over valves use free air but will have to be cleaned once per month. Also I have to take valves apart once a year and change injector, piston, seals and spacers. 💧👍
I am going to take a guess and say that the Filox is an improvement that you made to your tanks. It is described as a super-duty solid media that is 75 to 85 % manganese dioxide with an extreme life duration and performance level. I do not see it listed for sale in any listed air-over tanks that Aqua Science sells.
@@martyvanord984 Yes. I started with Katalox Light. It works great. I was backwashing filters every day and the mechanical wear just broke down the Katalox in a couple years. The Filox is good, problem with it is it is heavy, need good water flow to wash it. For a house I think Katalox would be the best. Probably backwash every 4 or 5 days.
What you have is what some refer to as a 'sticker' system.That is a good solid fiber tank and a reliable AIO style control head.Where and what do you source?
@@martyvanord984 I originally purchased the two filters and our well pressure tank from Aqua Science. I purchase parts from Softener Parts.com. The mazi valve I got from Drip Works. Is this what you were asking (source)?
@@thewindmillgarden Yes thank you!
@@thewindmillgarden Aqua Science looks to be an amazing resource. Thanks!
@@martyvanord984 Are you setting up a well and water system?
@@martyvanord984 Are you setting up a well and water treatment? Another good source of videos is US water systems. You can also talk to techs. at Aqua Science.
Tell us about your well water.
I did reply to this but it is now blank. The well water is rusty with rust chunks. I have taken anything visible out with a triple set of 20-inch big blue 4.5-diameter pleated filters.50--5--1 micron. To my amazement, they lasted a year and a half before I changed them out. Clogging with rust flakes was a problem before. Even though the water is clear, it still creates rust stains. I am looking at adding a treatment stage after the big blue filters. Air over with side injection and peroxide treatment as well as heads that create a top air pocket are all being considered.
i
Sounds like you are dealing with both oxidized iron and dissolved iron. Those chunks could clog air injectors, so thats good to get them out first. Have you considered spin down filters? An iron filter or peroxide system will get the dissolved iron. Have you done a water test. Aqua science and Im sure others do free water tests and will give you treatment options. 💧👍
@@thewindmillgarden LOL After filtering out the rust, I realized that NOT having dissolved iron would not be logical.
@@thewindmillgarden I do have a 2 inch Rusco spin-down filter before the 50 micron BB filter. The water inside the clear housing is so rusty that seeing to the back is difficult. Even though I know better it seems to do nothing but I am sure is helping protect the first pleated filter.
@@thewindmillgarden I just received a water test bottle from Aqua Science today. Thanks again for the source. This company was not even on my list of possible companies to consider.
what brand of air over valves do you use???? There was no name viable.
@@martyvanord984 Fleck 2510.
@@thewindmillgarden Thanks for getting back to me
What type of cleaner you run through your's? I picked up some oxy-p to clean out my Katalox setup.. I haven't used it yet just curious on your's.. ty
@@xmonte7835 I use Iron Out. 👍