Thank you for making this detailed video. FrSky just released Ethos 1.3.0 over this last weekend. Prior to 1.3.0, it wasnt possible to use multi protocol, and hence impossible to fly a blade heli with a Tandem transmitter. I fumbled my way though mocking up a config, using the information in the BL2 manual. But its obviously spektrum specific, so didnt exactly translate well. I actually busted my swashplate in the process. I had it fairly close. But having watched you walk through your config in Open Tx filled in the gaps for me. The only challenge is that there is no channel override in Ethos. So I just had to program an extra pitch and gyro curve, triggered by the logical switch config as opposed to using a special function. My replacement swashplate arrives Thursday, so I'll see how well it flies after that. But its now responding exactly as I would expect. Especially with the LED indicating correctly from flight mode and SAFE mode. I'm happy to share the ethos config file if you are interested.
Thanks for this video. I started flying CP helis with a DX6e and BL2, switched over to OMP helis using the DX6e with a tweaked BL2 file, and I just purchased a TX16S. This video and the .otx files you directed me to will help immensely.
Great video thanks ! Having Spektrum and now also using Radiomaster. With Your video I have a great starting point for settings on Heli for the Radiomaster
Forget about the file to truly understand this radio follow his video. Go slow double check every input i was a spektrum user go ing to this radio was a huge learning curve now have an understand of how it works threw trail and error i use both radios now still love my ix 12
Im trying to setup a Nano S2 on my TX16S and trying to folow your setup as it seems like the same as the mCPX BL2 but when you get to the mixer part thats where I get stuck because when trying to set channel 5 source for Gyro and 6 for Pit I dont seem to have those options. I only get the options for Ail, Ele, Thr, and Rud as sources on my radio. What am I missing? How do I get Pit and Gyro as sources? I am running OTX v 2.3.14 if that makes a difference.
Do you want to send me an email and I will send you the file and then you can just upload it right into your radio. Choppers992@hotmail.com you have to create channel 5 and 6 and name them as Gyro and pitch
What is the purpose of having different Gyro values? Normal: +100% FM1 & FM2: -100% I am assuming you are not flying on Normal mode much, I am just confused why even have the +100% value.
Dear WestHobbiesRC, thanks for sharing this great video. This video helps me a lot for setting up my Blade helis to my TX16S. But I assume there´s a little mistake in the order of timing for the rescue mode, starting at 08:10. L02 has a delay of 0.1sec relative to L01, meaning the collective goes to 75% first and 0.1sec later the heli goes to auto-level mode. Isn´t it correct to set a delay of 0.1sec for L01and to erase the delay of L02, so the heli first goes to auto-level mode and then the collective goes to 75%? I may assume that my proposal may be right especially when you fly inverted, so you don´t smash your heli in the ground. Am I right? Thank you very much and have a nice day. Best regards, Markus.
Hi! Thank you for your videos. Would this setup also work with a Blade 150S? I got a new TX16s but i do not really get it how to setup that transmitter. Coming from a VBAR with my bigger helis...
I don’t see why it wouldn’t work with the 150 S! Are use one model file for all of my helicopters. You might have to reverse a servo little stuff like that but the base of it will be the same. The TX16S is a great radio but man can it be a pain in the ass to setup!
Hello.^^ Last time the 150s problem could not be solved, I bought the dx6 and after I finished the precise setting on the 150s, it seemed to apply to the tx16s. Is there any problem if I set bl2 to tx16s and flying it right away? please reply thank you.
Sorry for the late reply, just seeing your comment. You should be able to use the same file and tweak it a little bit. Just take the blades off the 150 and make sure everything is going the right direction and working like it should.
Thank you, yes it Will discover telemetry automatically assume as powered on you just have to go in and set your widgets and turn on what you want to display.
Dear WestHobbiesRC, I've been watching a lot of your videos on youtube and I'm alwyays excited of the knowledge of experienced pilots like you. I learn a lot about programming and flying a RC heli. I own some Blade helis (Nano S3, mcpx BL2, Infusion180 Smart, Fusion180 Smart, 230S Smart and an Fusion360 Smart) and I fly these helis using a Spektrum NX8. I also own an OMPHOBBY M1, M1 Evo and M2 Evo using a DSMX-satellite to bind them to my NX8. I just bought a Radiomaster Zorro 4in1 multi-protocol two weeks ago to have a more compact radio than my NX8 and I like that gamepad style of the Zorro. May I ask you to send me the otx-file for the mcpx BL2 and perhaps also for the other Blade helis, if you have a separate otx-file for threm. Is your file from the TX16S compatible with the Zorro? On another video, there was a guy explaining that you have to invert the output of CH1, 4 and 5 when using a Radiomaster in combination with a DSMX-satellite. Thank you very much for your help and for the otx-file in advance. I've sent you an email about one week ago where I've asked you for the otx-file. Have a nice day and best regards, Markus from Munich, Germany.
I got my radio master set up with my S3 nano blade some reason it wants to fly up if I give it throttle down now I did change broado to reverse and that will neither give me up or down some reason I can't make my helicopter go up unless I give throttle down and I've tried to reverse the throttle already
Thx for the GREAT video! Want to try to get my Nano S2 flying with this radio cuz I SUSPECT my DX6i is faulty. Can I use your values for the S2, do you know?
Great Video. I’m gonna try it on mine. I have mine setup but gonna try your way, BL2 is is a fun Heli to fly. Thanks again, maybe you can make that video on how to swap those switches for rescue. Thanks
Awesome! Give it a shot. I can email you the model file as well. I will definitely make a video how swapping the switches. Just waiting on a speaker for the new TX16S that I’m going to use for the video.
I can’t get any of the flight modes to work. I can only fly in one mode and flipping modes doesn’t do anything. I’m using a blade nano s3 and I set everything up like you did i think…
@@westhobbiesrc8051 actually nothing it should be. Except pitch. And it randomly spools up and the swash goes crazy. I'll then fly it on my dx8 and it's all good. I'm baffled.
@@brandohim that’s super weird! I’m not sure on that one. So obviously it’s not a electronic problem if when you bind it to your DX eat it works like it should. I’ll have to do some thinking on that.
Hello, that is normal. Blade says they did that so you don’t break main gears from a sudden stop of the motor. Not sure if that’s true. I’ve tired all kinds of things to get rid of it but it’s in the FBL
@@westhobbiesrc8051 Ive talked to horizonhobby, it is not normal, ive contacted them and they are sending a new board, try to contact them and you get a new board free of charge!
@@andresuribehenn I’ve talk to them and multiple others who have the same model and it is normal a new board is not going to fix it. I was told by their tax that it was designed to stop the initial brought stop on the main gear from stripping. But let me know if the main board does fix it
@@westhobbiesrc8051 I've seen a lot of comments online that people get new boards and it gets fix, on the event of a crash that 4 secs of delay could damage completely the helicopter
@@westhobbiesrc8051 If you're using a Radiomaster TX 16S ( i bought my first one last week so it's a Mark II), then you can set Channel 14 as throttle kill, it will instantly kill the throttle. Assign it with a Curve of -100. I've tested and this works 100%. Hope this helps
I enjoyed the video.^^ Is it possible to set advanced setting and trim flight like in the spectrum transmitter? I couldn't configure both tx16s and 150s.
So unfortunately not that I have found, I am still working on it but I have been yet to be able to figure out how to make trim flight advanced settings work and the TX16S for models like the BL2, 150, 230 etc. thanks for watching.
I will double check, I get so many emails every day sometimes they get lost and/or I just don’t get to them right away. But I will be sure to check now
I don't know if you're still willing to help people out with this but I sent you an email asking for the profile if it's still available, thanks for the help
Hello everyone, it would be nice, if you could send me the setup file. I'm currently getting used to my TX16S. Thank you in advance and keep it up. Ulrich from Germany
![Radiomaster TX16s Setup • Complete Start to Finish Tutorial • [Beginners]](http://i.ytimg.com/vi/2Jh7_ZTRSpI/mqdefault.jpg)
Thank you for making this detailed video. FrSky just released Ethos 1.3.0 over this last weekend. Prior to 1.3.0, it wasnt possible to use multi protocol, and hence impossible to fly a blade heli with a Tandem transmitter.
I fumbled my way though mocking up a config, using the information in the BL2 manual. But its obviously spektrum specific, so didnt exactly translate well. I actually busted my swashplate in the process. I had it fairly close. But having watched you walk through your config in Open Tx filled in the gaps for me. The only challenge is that there is no channel override in Ethos. So I just had to program an extra pitch and gyro curve, triggered by the logical switch config as opposed to using a special function.
My replacement swashplate arrives Thursday, so I'll see how well it flies after that. But its now responding exactly as I would expect. Especially with the LED indicating correctly from flight mode and SAFE mode. I'm happy to share the ethos config file if you are interested.
Thanks for this video. I started flying CP helis with a DX6e and BL2, switched over to OMP helis using the DX6e with a tweaked BL2 file, and I just purchased a TX16S. This video and the .otx files you directed me to will help immensely.
Awesome! I’m glad that will help. My whole goal is to help people with what I can!
I learned to fly heli on the original mcpx. Several bad crashes, but I still have it and will never get rid of it.
That’s awesome! I still have an original MCPX as well and not want it in many years but it did fly the last time I tried it. Great little heli!
Great video thanks ! Having Spektrum and now also using Radiomaster. With Your video I have a great starting point for settings on Heli for the Radiomaster
Awesome! Thank you very much for watching. Glad I can help you will enjoy the radio master!
Forget about the file to truly understand this radio follow his video. Go slow double check every input i was a spektrum user go ing to this radio was a huge learning curve now have an understand of how it works threw trail and error i use both radios now still love my ix 12
thanks for you video, all are great!! I have a question about these configuration for Nano S3. Are the same configuration?? Thanks
Thank you! So yes as far as I know. I only made one template and used it for all my helis on the TX16S.
I tray to do on saturado. I Hope World. Thanks again
where is the extrernal receiver on the bl 2??
@@rotor_rush external RX? It’s all built in on the BL2.
@@westhobbiesrc8051 what does the tx16s have? isnt it futaba proto??
i have a bl2 and it only connects to spektrum
@@westhobbiesrc8051 what about the tx16s isnt it futaba proto and needs a reciver to bind to the bl2?
Im trying to setup a Nano S2 on my TX16S and trying to folow your setup as it seems like the same as the mCPX BL2 but when you get to the mixer part thats where I get stuck because when trying to set channel 5 source for Gyro and 6 for Pit I dont seem to have those options. I only get the options for Ail, Ele, Thr, and Rud as sources on my radio. What am I missing? How do I get Pit and Gyro as sources? I am running OTX v 2.3.14 if that makes a difference.
Do you want to send me an email and I will send you the file and then you can just upload it right into your radio. Choppers992@hotmail.com you have to create channel 5 and 6 and name them as Gyro and pitch
@@westhobbiesrc8051 can you do that for me for my nano s3 for my radio master tx16s
What is the purpose of having different Gyro values?
Normal: +100%
FM1 & FM2: -100%
I am assuming you are not flying on Normal mode much, I am just confused why even have the +100% value.
Where would I find ecur for the logical switch? I’m on EdgeTX 2.10.4 and can’t find any V1 option for ecur.
Dear WestHobbiesRC, thanks for sharing this great video. This video helps me a lot for setting up my Blade helis to my TX16S. But I assume there´s a little mistake in the order of timing for the rescue mode, starting at 08:10. L02 has a delay of 0.1sec relative to L01, meaning the collective goes to 75% first and 0.1sec later the heli goes to auto-level mode. Isn´t it correct to set a delay of 0.1sec for L01and to erase the delay of L02, so the heli first goes to auto-level mode and then the collective goes to 75%? I may assume that my proposal may be right especially when you fly inverted, so you don´t smash your heli in the ground. Am I right? Thank you very much and have a nice day. Best regards, Markus.
Hi West Hobbies did you ever find out how to reset the MCPX BL2 receiver board? Please share if you did. Thanks
No I have not. I did the full micro heli build on mine but the board is still acting up. I honestly think it’s just a bad board.
Hi! Thank you for your videos. Would this setup also work with a Blade 150S? I got a new TX16s but i do not really get it how to setup that transmitter. Coming from a VBAR with my bigger helis...
I don’t see why it wouldn’t work with the 150 S! Are use one model file for all of my helicopters. You might have to reverse a servo little stuff like that but the base of it will be the same. The TX16S is a great radio but man can it be a pain in the ass to setup!
@@westhobbiesrc8051 thanks! I'll try your setup
Hello.^^ Last time the 150s problem could not be solved, I bought the dx6 and after I finished the precise setting on the 150s, it seemed to apply to the tx16s. Is there any problem if I set bl2 to tx16s and flying it right away? please reply thank you.
Sorry for the late reply, just seeing your comment. You should be able to use the same file and tweak it a little bit. Just take the blades off the 150 and make sure everything is going the right direction and working like it should.
Hey, a very good and informative video as always. Does the telemetry entries appear automatically when you run discover on the TX16s ?
Thank you, yes it Will discover telemetry automatically assume as powered on you just have to go in and set your widgets and turn on what you want to display.
Dear WestHobbiesRC,
I've been watching a lot of your videos on youtube and I'm alwyays excited of the knowledge of experienced pilots like you. I learn a lot about programming and flying a RC heli. I own some Blade helis (Nano S3, mcpx BL2, Infusion180 Smart, Fusion180 Smart, 230S Smart and an Fusion360 Smart) and I fly these helis using a Spektrum NX8. I also own an OMPHOBBY M1, M1 Evo and M2 Evo using a DSMX-satellite to bind them to my NX8. I just bought a Radiomaster Zorro 4in1 multi-protocol two weeks ago to have a more compact radio than my NX8 and I like that gamepad style of the Zorro. May I ask you to send me the otx-file for the mcpx BL2 and perhaps also for the other Blade helis, if you have a separate otx-file for threm. Is your file from the TX16S compatible with the Zorro? On another video, there was a guy explaining that you have to invert the output of CH1, 4 and 5 when using a Radiomaster in combination with a DSMX-satellite.
Thank you very much for your help and for the otx-file in advance. I've sent you an email about one week ago where I've asked you for the otx-file.
Have a nice day and best regards,
Markus from Munich, Germany.
I got my radio master set up with my S3 nano blade some reason it wants to fly up if I give it throttle down now I did change broado to reverse and that will neither give me up or down some reason I can't make my helicopter go up unless I give throttle down and I've tried to reverse the throttle already
Thx for the GREAT video! Want to try to get my Nano S2 flying with this radio cuz I SUSPECT my DX6i is faulty. Can I use your values for the S2, do you know?
Thank you! Give me a day or two and I will make a video with the S2 binding to the TX16S Just for you
@@westhobbiesrc8051 No way! That would be INCREDIBLY AWESOME! Thank YOU! :)
@@TechNoPhobiaGirl You are very welcome. I’m going to work on it tonight and try to get it out in the next day or two.
@@westhobbiesrc8051 Were you able to make the s2 video? I assume it should be the same for the s3 as well.
Was this video ever issued? I currently have the gyro on the S2 bypassing the throttle hold and can't work it out.
Great Video. I’m gonna try it on mine. I have mine setup but gonna try your way, BL2 is is a fun Heli to fly. Thanks again, maybe you can make that video on how to swap those switches for rescue. Thanks
Awesome! Give it a shot. I can email you the model file as well. I will definitely make a video how swapping the switches. Just waiting on a speaker for the new TX16S that I’m going to use for the video.
@@westhobbiesrc8051 Great, thanks.
Send me a email (in the description) and I’ll send that file to you.
@@westhobbiesrc8051 Was able to swap out the switch. Just waiting on your file, thanks. I emailed you, saying thanks in advance. Regards
Just sent the file, your welcome.
I can’t get any of the flight modes to work. I can only fly in one mode and flipping modes doesn’t do anything. I’m using a blade nano s3 and I set everything up like you did i think…
Nano S3 should be the same setup. I have a S2 I’ll try it on and see
@@westhobbiesrc8051 cool also I’m running edge tx but it was still pretty similar in set up
@@BurgerurgerFPV To get the Normal (green), Stability (Blue) and Idle up (Red) I had to set gyro to 100, 0, -100
Hello, would this setup work on the nano CP V2? I've tried it and I'm getting some really funky results.
Hello, not quite sure. I have never tired it. What is it doing?
@@westhobbiesrc8051 actually nothing it should be. Except pitch. And it randomly spools up and the swash goes crazy.
I'll then fly it on my dx8 and it's all good. I'm baffled.
@@brandohim that’s super weird! I’m not sure on that one. So obviously it’s not a electronic problem if when you bind it to your DX eat it works like it should. I’ll have to do some thinking on that.
@@westhobbiesrc8051 thank you, I'll be looking for your expertise!
@@brandohim the nano CP is the same basic heli as the nano S2?
would this setup be the same as a nano S3? Or similar?
Yes, it should be the same!
thank you for your quick response.
Would this possibly work on a nano s3? I’m new to this and cannot get any of this right
It should work the same, I have a S2 I’m going to do.
Hi, I did everything but I have a delay of 3 or 4 seconds in throttle cut and when I lower the throttle stick, do you know how to fix it?
Hello, that is normal. Blade says they did that so you don’t break main gears from a sudden stop of the motor. Not sure if that’s true. I’ve tired all kinds of things to get rid of it but it’s in the FBL
@@westhobbiesrc8051 Ive talked to horizonhobby, it is not normal, ive contacted them and they are sending a new board, try to contact them and you get a new board free of charge!
@@andresuribehenn I’ve talk to them and multiple others who have the same model and it is normal a new board is not going to fix it. I was told by their tax that it was designed to stop the initial brought stop on the main gear from stripping. But let me know if the main board does fix it
@@westhobbiesrc8051 I've seen a lot of comments online that people get new boards and it gets fix, on the event of a crash that 4 secs of delay could damage completely the helicopter
@@westhobbiesrc8051 If you're using a Radiomaster TX 16S ( i bought my first one last week so it's a Mark II), then you can set Channel 14 as throttle kill, it will instantly kill the throttle. Assign it with a Curve of -100. I've tested and this works 100%. Hope this helps
I enjoyed the video.^^ Is it possible to set advanced setting and trim flight like in the spectrum transmitter? I couldn't configure both tx16s and 150s.
So unfortunately not that I have found, I am still working on it but I have been yet to be able to figure out how to make trim flight advanced settings work and the TX16S for models like the BL2, 150, 230 etc. thanks for watching.
@@westhobbiesrc8051 Thank you. If you find a way, please make it into a video :)
@@user-myoungE I definitely will! I’m trying and been playing with it for a while now! Thanks for watching
Will the blade nano s3 bind to the tx16s too?
Yes it will, the TX16S will bind to any DSMX protocol
Hello, I also wrote an email 1 week ago to get your otx file. Did the email arrive?
I will double check, I get so many emails every day sometimes they get lost and/or I just don’t get to them right away. But I will be sure to check now
I sent the email again let me know if you got it.
@@westhobbiesrc8051 Hi Jeff, I have received. Thank you.
I don't know if you're still willing to help people out with this but I sent you an email asking for the profile if it's still available, thanks for the help
Email sent! Thanks!
Hello everyone,
it would be nice, if you could send me the setup file.
I'm currently getting used to my TX16S.
Thank you in advance and keep it up.
Ulrich from Germany
please send me the Blade mcpx configuration file
Send me an email
Hi
Can please email me your BL2 file.
Send me an email and I will get it to you
hey, i sent you an email, but didnt get any response. maybe spam? woulkd love to get the setup file from you. thanks
Could you send me another one? I did not get it. I’ve gotten a lot of emails I might’ve missed it I will look tonight!
@@westhobbiesrc8051 I sent you another mail. I hope it doesn’t get lost again xD thank you in advance :)
@@MySchuetzi awesome! I’ll go look now!
I sent you the file, let me know if you got it.
@@westhobbiesrc8051 yepp, saw the mail just now.
Will try the setup this evening. Thank you very much