Це відео не доступне.
Перепрошуємо.

Ktm 1290 Super Adventure fuel filter change

Поділитися
Вставка
  • Опубліковано 23 кві 2018

КОМЕНТАРІ • 23

  • @dougmatson6088
    @dougmatson6088 6 років тому +5

    One thing that should be done when replacing the top of the pump housing is to slightly bend the metal prongs in and when you put the top back on listen for the two clicks then use a heavy duty zip tie around those clamps to keep the clips from spreading. When you fire the bike up the top off the pump has a lot of pressure and if the slips are not seated the correct way it will pop off and could break the housing (ask me how I know this!). If you go on to the ADV rider site under the Orange Crush forum there is a very detailed thread on this very subject.

    • @arezesonwheels4119
      @arezesonwheels4119  6 років тому +1

      Doug Matson thanks for the additional info and comment. Ride safe.

    • @jacopopelli7357
      @jacopopelli7357 4 роки тому

      Do you mean the two pieces you see opening at 2,44?

  • @Gate3739
    @Gate3739 4 роки тому +3

    thank you very much for this information, just did the valves, and I guess that this is my next job!

  • @Lewiseyers
    @Lewiseyers 5 років тому +3

    That's a great video, thanks, it will help so many people too

  • @timothyhudson7999
    @timothyhudson7999 4 роки тому

    Thank you so much for posting this video. Now I will do the work instead of my mechanic!

  • @vamosquenosvamos
    @vamosquenosvamos 6 років тому +3

    Muy util👏👏👏👍

  • @raymondavalon
    @raymondavalon 4 роки тому +1

    Obrigado Pedro!

  • @jankarsteneilertsen8927
    @jankarsteneilertsen8927 Рік тому

    great video. Thanks 🙂

  • @GiveWayMotovlog
    @GiveWayMotovlog 6 років тому +1

    Hard as hell

  • @hottfats
    @hottfats 3 роки тому

    Thanks mate

  • @jordanferrari1559
    @jordanferrari1559 2 роки тому +1

    🙏🏽

  • @carlosfigueiredo415
    @carlosfigueiredo415 2 роки тому +1

    Este vídeo foi uma boa ajuda. 👌

  • @LAWMotorsportsdotnet
    @LAWMotorsportsdotnet 6 років тому +1

    the filter canister, springs and o-rings were from a KTM "kit" or just parts you have laying around?

    • @arezesonwheels4119
      @arezesonwheels4119  6 років тому +1

      M .Warren all the pieces are part of the Oem fuel filter kit I bought from ktm... Original parts.

    • @LAWMotorsportsdotnet
      @LAWMotorsportsdotnet 6 років тому

      Part number handy?

    • @arezesonwheels4119
      @arezesonwheels4119  6 років тому +1

      Ref 61007090100...here it costed me around 55€ at ktm dealer.

    • @LAWMotorsportsdotnet
      @LAWMotorsportsdotnet 6 років тому +2

      Thank you, sir for the information and very helpful video

  • @roybatty-
    @roybatty- 3 роки тому

    Will a dirty fuel filter throw a check engine light?

  • @umitatabey
    @umitatabey 2 роки тому

    Ktm 1290 sas Motorum 220 km hızı geçemiyor nedendir acaba bir bilginiz varmı?