The outdoor unit fan stops randomly after about 30 mins, but if you turn the unit off and back on the fan runs again for 30 mins or so again. What could this be? Unit inside runs great, it dont stop when this happens
As long as your unit was vacuum first for at least a couple hours and then you release it and then check to make sure that you had the right amount of refrigerant that wouldn't be your problem unless there's a week or it did not come pre-charged to the full capacity for the line set for your particular unit
Put a piece of cardboard outside underneath the outdoor unit to see if you're getting dripping and if you're not check with the indoor unit drain if these don't properly drain they won't heat and make sure that your unit can work under cold conditions some of these units will not work if it hits 10° outside
You mean you cannot adjust the airflow to be stronger I would first change my batteries and then order a new remote that you can return if that's not the problem start with the simplest things first
The blower blows air but temperature stays room temp in spite of the settings. Good news is I had a response from Denali after emailing them. We might be able to troubleshoot with them on the phone, using a multimeter.
When I click the on button on the remote I hear the beep sound but no signs show up signifying that it's even on
I always start with troubleshooting the most easiest meaning in your situation may be just the batteries or a faulty remote
Does it work without the remote? There’s an on off button on the split but when I push it nothing happens
Mines not turning on ,but have brand new batteries
The outdoor unit fan stops randomly after about 30 mins, but if you turn the unit off and back on the fan runs again for 30 mins or so again. What could this be? Unit inside runs great, it dont stop when this happens
My Hessaire is giving a code 39
The blower works fine, it is only blowing room temp air.
Was lead to believe it came pre charged.
Will I need to refill the unit.
Did you figure out this issue? Having the same problem
I have the same problem @@currenjohnsen7938
This shit looks like the jumpe start capacity on the outdoor unit. It is a comum problemm
As long as your unit was vacuum first for at least a couple hours and then you release it and then check to make sure that you had the right amount of refrigerant that wouldn't be your problem unless there's a week or it did not come pre-charged to the full capacity for the line set for your particular unit
Heat pump cools but no heat both high pressure lines and cold plz need help
same here, on heat mode, but no heat. how to fix that?
Put a piece of cardboard outside underneath the outdoor unit to see if you're getting dripping and if you're not check with the indoor unit drain if these don't properly drain they won't heat and make sure that your unit can work under cold conditions some of these units will not work if it hits 10° outside
Not blowing proper heating mode air tried everything
You have to wait at least 3 min for it to go into heat mode after you put it in it and they all have to be in the same mode had the same problem
@@D1v1neDreams it is MSZFH06NA 253 max volt 187min split system heat pump mines not blowing warm at all it’s -3 here hasn’t worked for a week
Ours just does nothing in heat mode. Every other function works but when on heat we get nothing. No error codes either.
@@valerieburton3451 did you find issues?
Did you find out why it doesn't blow warm air ? I have the same issue.
My unit turns on, no error codes, it shows the temperature I set it to, like normal, but nothing comes out, it doesn't blow and Idk what to do
Mine does the same. Did you figure out a solution?
@@jamesduffy2834 nope..
Mine is doing same thing in heat mode.
Any updates on why?
@@jhunsi20041same with ours… everything working but heat. Then nothing.
Having heat issue. All functions work fine but when go to heat we get nothing at all. No error codes either. Just nothing.
Mine was a stupid error. We didn't get the line open enough. Go out and turn the valve (looks like a screw at the end of the pipe coming out of)
exact same here. how did you fix that?
Me too ,whats going on.
I think a toxic smell is coming from our unit. I notice it more at night. It is strong enough to burn your eyes. What could be the cause?
Mold. Have it professionally cleaned
I think ours is the compressor needs replaced
So my Mini Split is cutting on but not blowing air. It blows air for 3 secs then stops.
You should check for an error code on the remote control.
unit coms on but run's very slow. What can cause this problem?
You mean you cannot adjust the airflow to be stronger
I would first change my batteries and then order a new remote that you can return if that's not the problem start with the simplest things first
Same problem here ... Heat is not working..not blowing
It's not blowing any warm air at all or any type of airflow then it might be your blower
The blower blows air but temperature stays room temp in spite of the settings. Good news is I had a response from Denali after emailing them. We might be able to troubleshoot with them on the phone, using a multimeter.
Mini split shows error codeE5
Stupid thing is loud. Something is loose in the inside unit. Best to just throw it away and get a Mitsubishi.
Having heat issue. All functions work fine but when go to heat we get nothing at all. No error codes either. Just nothing.
Same thing here. It started after we had a power outage. No error code. Louvers are not moving either. Works on cold not for heat!
Same. My outdoor unit kicks on but indoor unit isn’t running.
@@georgemartinez4355same here. Everything works fine except for heating mode. The outdoor unit never kicks in.
I'm having the same problem. I'm trying the dip switches under the remote control battery cover.
Added 410, system went into defrost and then started blowing hot air