How to change the oil in a Kubota SVL showing service points tips & tricks

Поділитися
Вставка
  • Опубліковано 21 гру 2024

КОМЕНТАРІ • 71

  • @StinkyTeal
    @StinkyTeal 4 роки тому +1

    I like your oil change videos cause it makes me feel better when Im covered in oil, like I'm not the only one.

  • @AveryExcavating
    @AveryExcavating 4 роки тому +2

    I built a funnel with 1 inch tube and a 90 degree irrigation fitting to fill mine with oil. That little bracket on the top is right in the way. The 95-2 is the same. Also, my guys drove it up on 6x6's last time to get more space. Good machines! Thanks for the video.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Thanks for the tip bud nice to see you landed on the channel! I remember you had the 90-2 then got the 95..

  • @lilrisk071
    @lilrisk071 2 роки тому +2

    Thank You Sir Saved Me A Headache

    • @DIRT-BOSS
      @DIRT-BOSS  2 роки тому +1

      Welcome Please subscribe!

  • @petermccall8975
    @petermccall8975 4 роки тому +2

    I'm convinced! 5 gal oil drain pan, $8 at Walmart- size of opening, about a foot; no spills; no black hands

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Peter yes sir i have all shapes & sizes from there 👍🏼
      Thanks

  • @janethouck9763
    @janethouck9763 4 роки тому +2

    Great use of the warm days in march

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Yes today was a beauty! 🌞
      Thanks Janet

  • @lakesideranch
    @lakesideranch 4 роки тому +3

    Great video brother! Very informative and well narrated. 5 stars from here. Have a safe week, see ya on the next adventure...You certainly picked a beautiful day to do maintenance!
    Doug@ the "ranch"

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +2

      Doug yes hope this weather stays with us!
      Thanks bud

  • @Ticolandscaping
    @Ticolandscaping 4 роки тому +2

    This year I started to use a moving blanket from cheap store as a work blanket. It’s great to throw down on gravel to crawl around on. You should try it out and see if you like it.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Good idea Mike i got a couple ill try it 👍🏼 thanks

    • @green-zone36
      @green-zone36 4 роки тому

      A nice doubled sheet of cardboard would be smoother on the back. I like to use cardboard. If it is my knees, that are on the ground I use a peice of carpeting under the cardboard. Real nice and gentle on the knees.

  • @jmac88022
    @jmac88022 4 роки тому +1

    I like that safety pin for the door. I've gotten hit by a bobcat door it hurts.
    Nice score on the old uniforms. Can't wait to see who youll be next.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +2

      LOL i know i got a whole stack of them! Thanks man!

    • @jmac88022
      @jmac88022 4 роки тому +1

      @@DIRT-BOSS its the little things in life bro! Keep on keeping on!

  • @j.c.smithprojects
    @j.c.smithprojects 4 роки тому +1

    i was just telling my wife that i need to buy some uniforms to work in. save some money on levis! we stand our skid steer up on its back to get to those plates! hahaha!! i rarely wear gloves but i do when i am messing around with diesel oil....that stuff gets into the cracks and callouses and stains my hands. i like that you work outside. i prefer working outside myself when the weather is decent. i can see so much better....its a great day when the sun is shining, wind blowing, and the birds are chirping. seems like the work is just easier.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому

      Yes sir i seen that skiddy doing a wheelie! Yeah today was a beautiful day.. everytime I say I'm just going to do this do that and not get dirty no such thing!
      Thanks bud

  • @tedohio3038
    @tedohio3038 4 роки тому +1

    Good video. Agree with other viewer about building new garage garage.
    Place where I bought my mini excavator rents equipment and they have a new garage with an enclosed power wash bay. It is separate from rest of garage and long enough to power wash equipment while it is on a trailer and connected to truck. Little over kill for an individual, but would be a nice to have.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Yes definitely need a shop!
      Thanks

  • @TrailTrackers
    @TrailTrackers 4 роки тому +1

    Hey Mike... You can also use that oil in a spray can as a release for your concrete forms. Great use for it if you do any flat work.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +2

      Yes possibly if i cut it with some diesel.
      Thanks for the tip!

    • @TrailTrackers
      @TrailTrackers 4 роки тому +1

      @@DIRT-BOSS : That's exactly right. And you're very welcome.

  • @neutralmind6047
    @neutralmind6047 4 роки тому +2

    Great video would have liked to see the power washing before and after

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Sorry about that I do have other videos with pressure washing.

  • @claytonboyle9863
    @claytonboyle9863 Рік тому +1

    do you recall what size socket needed for the three bolts holding rad in?

  • @1man1woman65
    @1man1woman65 4 роки тому +1

    Hey Mike, others have already mentioned it but putting the machine up on railroad ties (or something similar) would have given you a lot more room. Can't wait till you build that HUGE garage of yours-ha! Maybe a drive over pit if it's allowed in your area. Be safe, Stanley in Md.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Yeah that's definitely a good idea.. the pit is a must also.. my father had one in his garage we used it all the time..
      Thanks bud

  • @ragnarsbrother6049
    @ragnarsbrother6049 4 роки тому +1

    thanks for the tip Mark.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Your welcome sir thanks for watching!

  • @dalepremo3695
    @dalepremo3695 4 роки тому +1

    Well done, Dirt Boss! Wish you'd have shown the cleaning too, but that's OK. BTW tell Mark that his gloves looked a lot like skin, LOL!

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +2

      LOL yes that was like hot molded glove! Thanks Dale

    • @dalepremo3695
      @dalepremo3695 4 роки тому +1

      @@DIRT-BOSS Yep, and we've all done the exact same thing, too - or worse!

  • @btproliftthibodeau6038
    @btproliftthibodeau6038 Рік тому +2

    Thank you!

  • @MaritimerMitch
    @MaritimerMitch 4 роки тому +1

    These machines are so nice I posted a video today of the one from my work it's also a 90-2

  • @MaritimerMitch
    @MaritimerMitch 4 роки тому +1

    These machines are so useful ! How many hours do you get out of a set of tracks . We have one at my work you can see it in 1 of my videos shore rock

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Not sure these are the original set.. just turned a 1000 hours.
      Thanks

  • @_Gundy_
    @_Gundy_ 4 місяці тому +1

    I drive mine up on 6x6's to have more clearance underneath!

  • @antoniocontreras9796
    @antoniocontreras9796 3 роки тому +1

    What kind of oil do u use

    • @DIRT-BOSS
      @DIRT-BOSS  3 роки тому +2

      I use 80/90 gear oil

  • @joelvanhorn7448
    @joelvanhorn7448 Рік тому +1

    Thanks man

  • @louisianadirt2188
    @louisianadirt2188 4 роки тому +1

    Great video mark, come down here and I’ll cook while you do all of mine 😁

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Deal!whats on the cooker? 👨‍🍳

    • @louisianadirt2188
      @louisianadirt2188 4 роки тому +1

      Dirt Boss Masonry & Excavating Anything you want, we’ll call it Louisiana cook out!

  • @gimpy8349
    @gimpy8349 4 роки тому +1

    You’d think they would put the oil filter in a more convenient spot. Do you changed the hydraulic and fuel filter/separator at the same time. I actually bring my used oil to a guy right down the road from you.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому

      Yeah change both filter's.. yeah its not bad to get to tho.. Teds Auto!

    • @gimpy8349
      @gimpy8349 4 роки тому +1

      Dirt Boss Masonry & Excavating yup. Have some oil to drop off at Teds soon. Have to start delivering his firewood too🔥

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому

      @@gimpy8349 cool he's always got it stacked so nice.. lol

  • @boitanoexcavation3564
    @boitanoexcavation3564 4 роки тому +1

    Mike are you going to Conexpo next week?

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      No bud I'm not i was trying to get some buds together but never panned out.. I would love to go tho! You?

    • @boitanoexcavation3564
      @boitanoexcavation3564 4 роки тому +1

      Dirt Boss Masonry & Excavating Yes my wife and I are going this is our first time looking forward to it was hoping I could meet you

    • @louisianadirt2188
      @louisianadirt2188 4 роки тому +2

      Boitano Excavation Dirt perfect and
      Elite-earthworks are going to be down there,

    • @boitanoexcavation3564
      @boitanoexcavation3564 4 роки тому +1

      Louisiana Dirt 218 yeah im going to look Brandon up while im there

  • @benjamingirard339
    @benjamingirard339 3 роки тому +1

    Yarn on it? That's a new one for me 👍

  • @sheadsexcavating6613
    @sheadsexcavating6613 4 роки тому +2

    Try driving it up on some 6x6 timbers. Gives me a little more room to work without jacking it up.

    • @DIRT-BOSS
      @DIRT-BOSS  4 роки тому +1

      Yes good tip!
      Thanks for watching

    • @JT-qf4it
      @JT-qf4it 3 роки тому

      I use railroad ties

  • @joecruz4568
    @joecruz4568 3 роки тому +1

    Where diasnostic port?

    • @DIRT-BOSS
      @DIRT-BOSS  3 роки тому +1

      I honestly don't know do you have a manual check it out should be in there

    • @joecruz4568
      @joecruz4568 3 роки тому +1

      Thanks ... the owner waste manual book

  • @HavocAdventure
    @HavocAdventure 3 роки тому

    I can’t believe Kubota can’t come up with a better solution for the radiator. That’s absolutely horrible. Blocks everything. At least when u open a bobcat door u can get to all the maintenance items.

    • @DIRT-BOSS
      @DIRT-BOSS  3 роки тому +1

      It's really not that big of a deal You don't have to go in there daily Plus if you have a hundred horsepower motor you don't wanted to overheat with attachments You need a big radiator

  • @TokenTombstone
    @TokenTombstone Рік тому +1

    ha ha 7/8 is close enough