Awesome video. I took a picture with google to even figure out what it was. Mine is fully extended. I smooshed it to a retracted position brcause it was all the way out. I really want to try to reinstall the old valve but i dont want to screw up anything so i suppose i will just buy one. 😂❤
Hi John! yep I agree, this engine were built to last! this one had a slight rough idle so the valve was pulled out found to be covered in gunk (when I showed it on video it was partly cleaned up) new part went in and we have a silky smooth idle now 😁 Cheers bud!
@@AlexAutoFun Thanks for that! Yes, I just did a whole intake, gaskets, coolant elbows etc... Great engines! Thanks for the tips on this and your videos!
Hey Alex! Please make a video on install backup cameras inside vs outside. Concerns: 1) My license plate sits to the left of the car and that makes me worry the camera will be off center. 2) if I install inside will the rear window's lines mess with the video quality?
Hi Chihiro! I got you covered, here you go ua-cam.com/video/44WXN8MI66o/v-deo.html you can see both methods (inside and outside) at the 6:25 mark. Regarding the offset plate, while most installers use this area technically the camera can be placed anywhere on the rear of the vehicle only limited by the skills of the installer in routing the cable. For the second question you can see how rear defroster lines look on any of my dash cam review videos as I always mount my rear camera on the inside of the vehicle. Hope this helps and Cheers bud!
Hi DJ! Normally the mechanic will refer to the service manual or instructions that came with the valve to determine that. Most of the time adjustment is not needed but most mechanics will double check the valve to ensure it's up to spec before install (a valve out of spec could be one that requires adjustment before install, or that may have been returned by a prior customer and was adjusted manually placing it out of spec or could also be potentially defective). Again just depends on the part and how it's sold and what the service manual indicates is normal for it. Cheers!
Hi Jairo! I always disconnect the battery when working on a vehicle both for safety and also has the added benefit that it clears the cars computers (some cars are sensitive to having sensors disconnected while the car has power) But yep there are some mechanics out that will do it with the battery connected. Cheers!
Awesome video. I took a picture with google to even figure out what it was. Mine is fully extended. I smooshed it to a retracted position brcause it was all the way out. I really want to try to reinstall the old valve but i dont want to screw up anything so i suppose i will just buy one.
😂❤
Thanks Bud!
It worked like a charm, thanks for the great video. 2004 Monte Carlo Supercharged is again idling correctly.
You're welcome (and awesome car btw!) Cheers!
That mustache is fucking legendary
Great video and the best moustache on UA-cam!
Thank you Bud!
Good video I appreciate it ..I need the size of the screw driver u used
Good job brother 💪🏾💪🏾
Thanks Brady! 🍻
I have a Buick with the 3800 engine. These are fantastic engines! I have never replaced my IAC valve. What was the reason for the replacement?
Hi John! yep I agree, this engine were built to last! this one had a slight rough idle so the valve was pulled out found to be covered in gunk (when I showed it on video it was partly cleaned up) new part went in and we have a silky smooth idle now 😁 Cheers bud!
@@AlexAutoFun Thanks for that! Yes, I just did a whole intake, gaskets, coolant elbows etc... Great engines! Thanks for the tips on this and your videos!
@@johng.4959 You're welcome!
Mines idling loud I have a 95 buick lasabre..wat size tool that is
Great video. 5-Stars
Hey Alex! Please make a video on install backup cameras inside vs outside. Concerns: 1) My license plate sits to the left of the car and that makes me worry the camera will be off center. 2) if I install inside will the rear window's lines mess with the video quality?
Hi Chihiro! I got you covered, here you go ua-cam.com/video/44WXN8MI66o/v-deo.html you can see both methods (inside and outside) at the 6:25 mark. Regarding the offset plate, while most installers use this area technically the camera can be placed anywhere on the rear of the vehicle only limited by the skills of the installer in routing the cable. For the second question you can see how rear defroster lines look on any of my dash cam review videos as I always mount my rear camera on the inside of the vehicle. Hope this helps and Cheers bud!
How do I find the valve on a 2014 chevy Malibu LS 2.5 is it one piece with the throttle body ?
Am i able to just clean one of these and reinstall?
Thank you!!!
You're welcome YeliYeli101!
Does the iMac. Also cause high rpm n searching up n down rpms
So i do i close the control valve manually before installing if its out too long?
Hi DJ! Normally the mechanic will refer to the service manual or instructions that came with the valve to determine that. Most of the time adjustment is not needed but most mechanics will double check the valve to ensure it's up to spec before install (a valve out of spec could be one that requires adjustment before install, or that may have been returned by a prior customer and was adjusted manually placing it out of spec or could also be potentially defective). Again just depends on the part and how it's sold and what the service manual indicates is normal for it. Cheers!
Battery needs to be disconnected? I got a 2012 camaro
Hi Jairo! I always disconnect the battery when working on a vehicle both for safety and also has the added benefit that it clears the cars computers (some cars are sensitive to having sensors disconnected while the car has power) But yep there are some mechanics out that will do it with the battery connected. Cheers!
While I’m driving my Chevy impala 2012 dropping to zero while I’m driving
👌👌❤️❤️🙏🙏U.K.
Thanks M Virdi!