Yeah true. But this is a MOD motor fuel Injected 9.4 liters of total displacement if ya will a 5.8 with a 3.6 on top ..... or how about a 5.8 with a 4.7 kenne bell lol Different engines that’s all
Wrong again. The biggest was the 10.0 liter in the 2004 Roush Boss Concept. 429 SVO block bored to 600 cubic inches. Nascar 429 SCJ heads. 875 horse. 795 lbs. torque. Zero to 60 in 1.9 seconds. Good Lord!!! Never seen production though.
Nate you’re the man. This type of content is exactly what people like me are looking for. I like to know every part and cost just for learning purposes! It teaches me so much. Thank you buddy!
You should head down to Atlanta and let that dude in blue drive your car and review it. It would be extremely interesting and potentially funny but also he'll boost the hell out of your subscriber count. There's a lot of people who would love to see a 1500hp street car but don't know you exist. Love the vids man. I'm hype for this gt500 to be finished
@@kevinb.3656 he's not being a dick just trying to clarify. Plus they got robbed at 1800 let alone 2500 for cams. Good custom cams are usually under 1400 even from MMR is less than 1800-2500. Most I've ever seen them for was like 1600 or so
I honestly don't care the cost, I want to know where the money came from. One minute you were maxxing out CCs at 2,000 and now your spending 40k in 2 months.
All I have on my 3v is just a offroad x straight pipe mufflers and electric cutouts that I welded and hardwired into a rocker switch into my dash. I feel cheap 😂
Yeah I just left a very long comment on this subject. Wow there's so much wrong with what we all just watched. I knew it was going to be bad. When he said the 5.8 was the biggest engine Ford ever put in a mustang and the other motor had 6 to 1 compression.
I’d take that carbon fiber driveshaft off. they snap pretty easily, also you better be putting some weights in the trunk :) its hella front heavy right now
Stock GT500 will spin tires at 80 mph and accelerates to 190 if you’re brave enough. Cars Only problem is hooking up. You moving to Mexico with this. But still cool
The intercooler is bad ass but I live in wa ,,, heat exchanger and ice box will probably be suffice ..... had the triple pass on my 2009 with the 3.6 and It was solid ....
E.j. Lucas that’s exactly what I was thinking, I knew that ford had a bigger engine but I didn’t want to say anything to make myself look like an idiot
Do you Remember the 2007 - 2009 Shelby GT500's?...Shelby American Built a Prototype Shelby GT500 Call "CODE RED", this was to be the Future Shelby 1000! It was Built by Nelson Racing Engines aka NRE located in Chasworth, Ca., it was based on the 5.4L Shelby GT500 S/C Engine and it was a Twin Turbo setup using Both 91 Octane and E85 Custom Fuel System, putting out about 1200HP+/-! Now, I contacted NRE at that time and asked them what it would Cost to Duplicate a similar setup to a 2013/14 Shelby GT500 with 5.8L and they Quoted me a Price of $45,000.00 at that time!...I am Just Saying!...God Bless America! 😇
Nate Rider Fr?? That’s awesome man! i’m really surprised you don’t have more subscribers than what you have rn tbh. You’re better than Derek(Blucifer mustang) But you’ll get there. You should do meets with your fans do iphone giveaways 🤤Jk jk haha
Kenne bell are 6200 with the whole kit says it on there menu lol I can have the same build as Nate for 10,000$ cheaper exact same parts ....lol I hav thee exact same car so I don’t know who lied to you 🤣🤣🤣
Joseph Webb he also got the upgraded inter cooler so that cost more. I forgot how much he said in his other video but it probably cost him 8k for the whole thing
Sorry in advance for this long comment. First on a little side note. 5.8 isn't the biggest engine Ford ever used. Not by a long shot but to the more important conversation. Why in the world didn't you use your heads since you bought a short block? Paying 6k for new heads makes no sense to me. If you were going with new heads. Long block would have been the much better way to go. Most give a warranty on a long block. Short block isn't very common at all. You also paid way to much for a lot of things. I really wish I seen these videos much earlier to at least leave you something to think a out. I'm sorry but I feel like you were taken advantage of. Obviously doesn't mean that's what happened. So honestly nothing against the shop or people that did help you. I don't know them personally. It's why I said feels like based off much of the information in this video. For what you paid. You should have an engine built to handle 3000hp. There's completely 5.8 long blocks out there much cheaper that will handle the same power and more than you have now. I understand it's a 5.8 that came with the ca. So you wanted to stay true to that. So having a 5.0-5.4 built to handle 2500hp+ isn't really relevant here. Was a good option that said still. You should have never been talked out of the biggest blower either. It's cool you went with kennybell. They make great blowers. I know from experience building cars going back 20+ years. I've tuned many cars with them in the past. Great company and product. Again that said. Everyone wants to go faster. You get use to the power and you want more. Happens to everyone and you got a motor that will handle more power than I believe the 3.6 will make. Yes I know what they're rated to. Why someone told you. You would see 25lbs of boost with the bigger blower on your motor at that point is beyond me. If you have the motor you claim with the custom cams and 6k heads that flow a ton more air over stock heads. The motor is going to make less boost by a few pounds depending on how good those heads and cam are. The bigger the engine and the more efficient an engine moves air the lower the boost will be. Exhaust is also a factor. You still make power. It's just achieved with less boost. This is why when someone tells you they make 25 or 50lbs of boost it honestly doesn't mean shit as far as power goes. Many factors are involved to know the potential power. There's a big difference between say motor A which is stock. Than motor B that's modified with big cams and high flow heads. If both motors made 28lbs of boost. I guarantee the power is much different between the two of them regardless of the boost being the same. I'll give you a great example. Where I've seen many people make a mistake. That didn't have the experience or knowledge to know how to pick the right combination. Motor C you were told made 25lbs of boost in the car but it was never on a dyno. Then motor D made 15lbs of boost with the same blower and again wasn't on a dyno. No other information was available. Can you guess what motor most pick? If you said motor C. That's the one. Not knowing that motor D actually made more power even with less boost. This is why it's so important to understand how and why things work the way they do. The 3.6 is still not going to solve the problem any better than a 4.2 etc with having to much power. It's going to be the timing and fuel map that dictates how fast and hard the power comes in. The same could have been done with one of the bigger blower. Then later on when you wanted more power it's a simple pulley and tune change and you just add hundreds of hp. Now you need a new blower all together when that time comes for more power and it will lol. Honestly you should have went with a Procharger like a F1-X etc. It would have given you the ability to make less power now and much more later on. It's more manageable on the street because the boost isn't instant. So the torque is much lower on the hit. If it was an all out race car with good drag suspension and tire it becomes a little different conversation obviously. It's a ton of torque to deal with on a manual transmission setup. Don't remember what you said but I hope it's at least a triple. I wish you all the luck with it. Hated to be so negative but I'm just being honest.
Lol didn’t realize people still drive 2vs 🙃 but he didn’t define what he meant by the biggest engine ford has put in a mustang 🤷🏽♂️ I only assumed dimensions because i know when it comes to displacement ford has used a 427 and 429 before
@@BarnfindGT of you were as smart as you act you would know an 03 cobra wasn't a 2 valve and a 429 is bigger than a 427. Not trying to argue just facts
You’re reading comprehension is pretty non existent, Did I say a 427 was bigger than a 429? Also Didn’t know it was a cobra looked like a 2v from the profile pic lol
Bro its 168mm TB not a 106mm. Also 64k to build a motor🤦♂️ you can buy a l&M drop in fully built motor for 30k. Plus you have sponsors.. But nice video.
MarcosS197 lol it’s a whole lot cheaper once you start piercing it together little by little... A little more expensive if you buy crate, but I dunno wtf he’s doing here... I’ve feel as if I’m overlooking something ...cause I just don’t see how he spent 60k for 1500hp.. maybe 2500.... but 1500????
Omg bro! You got bent over! I have all ford gaskets for my gt500 I’m building almost done now. You can get all of the Ford gaskets for under $200, not $800...go to Modular Head Shop! No one is better on these, you can build your short block to 12-1500hp for under $4k, you can get your heads stage 3 new valves springs ported polishes etc.under $4k cams under $1500 closer to $1200... however the ARP you got a better deal because my ARP headbolts were$300 my main bolts w/side bolts $300,,, then billet Accufab timing chains and tensioners $800.... they balance to lower tolerances than anyone $350 cranks rods pistons and return shipping ,,,, I got diamond pistons, Molnar rods King racing and Clevite racing bearings etc. Jordan at Modular Head Shop can get you all this and do the best Ford GT head work ever. Way less.
Nate Rider what are your plans for suspension, to plant the "1500 rwp" to the ground? and for god sakes, you can spend approximately 60k on the engine and cant spend $20 to get that weave cut..lol joking, awesome car !!
And when you are done what are you going to do with it? I'm running stock 300hp S197 GT like this guy used to have and obey the speed limits, doing fine with that. lol.
I have just read the dumbest comments lol. "Oh this build is the value of a c8 or a new 2020 shelby , what a horrible financial choice to make" blah blah blah. Like he said " you have to PAY to play" how much would it cost to make a new shelby or c8 get the numbers he can achieve off this motor? Already more that 64k. He has built a monster of a car good job 👍🏽
It's not entirely accurate. He didnt do heads or trans, plus he got sponsored by kb and I think hes using the cams that came with his motor. But its definitely an expensive hobby
That is not the biggest motor ford put in a mustang....the boss 429 was the biggest motor Ford put in a mustang and one other thing I can spend 20k on a built Chevy LS9 and get the same HP
Dude the supercharger will fit under the stock hood. Just need lowering brackets. And hoodd don't cost that much. Nigha if you paying 2g for a hood you getting ripped off. I don't were you getting some of these prices from. But hey if you got that kinda money to just be blowing. Fuck it
It's also a coyote, the Trinity is better than the coyote imo. But there is definitely a huge chunk of cash this guy spent without using any real logic.
He makes like 3-4K a month just from YT, same thing for his apple job, and his google job and other things that he does...if you save up for a decent amount of time you have a lot of money my dude lol
@@mach183 because all he does is brag up about how much everything costs. We all knew from the start that this was going to be a pricey project. Just built it and show the progress without the numbers.
65k to make 1500 hp holy smokes maybe get a coyote and upgrade it for 15k and will make 1500 hp to much money better race it and bet alot of money and win to recover your 65k investment
Now, go wrap it around a light pole. Because there isnt any way that 1500 hp is streetable. Just a colossal waste of money. Like they say, a fool and his money are soon parted....
Somebody really jelly.. 1500 hp is 1000 percent manageable on the street .. You gotta know how the fuck to drive that shit.. I dont know if he can drive but the shit is definitely possible... 405s cars put down 6000+ hp and they get down the road every week... Fuck you talkin bout
@@jameswalterjr1557 1000%? You know that's not even possible, right? Nevermind, you probably dont know that's not possible....cant put a sentence together without the word f***....cant know a whole lot.
@@divemaster037 Yeah your right I'm the dumb one .. Cause I'm the one that made a ignorant comment about something I know absolutely noting about..😂😂😂😂😂😂 Fuck you pussy..
BUT IT'S NOT OVER WITH. YOUR DRIVE TRAIN IS GOING TO BE SEVERELY BEAT UP BY THAT MONSTER LURKING UNDER THE HOOD. IT'S PROBABLY BEST TO REPLACE YOUR DRIVETRAIN COMPONENTS BEFORE THEY BREAK SO THAT YOU CAN SELL THEM IN GOOD CONDITION, TO OFF SET THE COST OF NEW BEEFIER DRIVE TRAIN COMPONENTS, THAT CAN HANDLE THAT MONSTER OF AN ENGINE.
So many financial advisors here 😂 who cares what he buys. He puts it on UA-cam for your FREE entertainment. If he wants to spend $1,000,000 on a bottle of water who tf cares it’s his money, not yours. Also if he builds a business out of UA-cam he can likely write it all off anyway.
The smarter you spend the more you have to do more with. It's your kind of thinking why so many people are broke today and still live in their parents basement too. Many people like me also don't like see people being taken advantage of you lack of experience and knowledge. What to see him get grow as much as possible. They're many problems in this video with cost of this build. Some of use actually built and raced cars for many years and hate seeing young people make mistakes like this.
@@waynebollentin989 there you have it. Spend and save your money as you please, and let him do the same. No one gives you shit for being frugal, so don't give him shit for being flagrant. Especially when it doesn't affect you in any stretch of the manner. Also, he is stimulating his local economy, so can you really be that upset? If everyone put every dollar they had into funds, savings, etc. who would stimulate the economy? That's a completely different issue, but I don't feel you are ready for that conversation yet.
These types of videos is what gives a young person the wrong idea about automobiles there's no way in hell anyone walking around on gods green earth just been that kind of money in the car they going to drive on the street daily first of all you cannot use all of that horsepower even if it makes that much second of all something breaks and next thing you know you're adding to the homeless numbers ,unbelievable waste of time ,waste of money!
64k for the ones that are impatient
SuperJosereyna you the real MVP🤘
SuperJosereyna
Does that include the cars price?
Agent. K. No
Agent. K., 64k plus the 10k the last owner did plus the price of the car...
@@Chrxs210 those are irrevelent
Boss 429 is the biggest displacement ford ever put in a Mustang for a production run Nate👍
I worded that phrases wrong lol but you right
At least when you said it you didn't get attacked with weird and wrong answers lol
I love the channel classic, modern, all Great content
Yeah true. But this is a MOD motor fuel Injected 9.4 liters of total displacement if ya will a 5.8 with a 3.6 on top ..... or how about a 5.8 with a 4.7 kenne bell lol
Different engines that’s all
I do believe it was actually a 460 but the boss9 is a hog of a motor
0:50 5.8l was not the biggest engine in a mustang. The boss 429 was a 7.0l offered in 69 and 70. She’s still a ripper tho.
Wrong again. The biggest was the 10.0 liter in the 2004 Roush Boss Concept. 429 SVO block bored to 600 cubic inches. Nascar 429 SCJ heads. 875 horse. 795 lbs. torque. Zero to 60 in 1.9 seconds. Good Lord!!! Never seen production though.
Nate’s built 5.8 $$ > how much I make in an entire year 😑
I was just thinking the same thing..
It would take me 3.5 years to pay this off with my current hourly pay.
@@maxneuman8422 He's financing basically everything.. so it's technically not his until he's done paying everything off including the car
it's 2022 and I make less than that in entire year 😦
Nate you’re the man. This type of content is exactly what people like me are looking for. I like to know every part and cost just for learning purposes! It teaches me so much. Thank you buddy!
Plus actually finding a Shelby like this bone stock still expensive
Alex A this one wasn’t bone stock it had like 10k worth of mods when he bought it I think it was making 800 horse power he just wanted more power 😂
Assael Galen sheeeshhh I wish I had the money and time to do this, maybe one day :)
How does he not have 100k subs yet he’s building race cars god dammit lol. How is this not good content? I love it.
Ur the man
Nate Rider, good morning man. Do you happen to have extra parts you might be selling for the 05-09 mustang GT ?? Thanks for your time
You should head down to Atlanta and let that dude in blue drive your car and review it. It would be extremely interesting and potentially funny but also he'll boost the hell out of your subscriber count. There's a lot of people who would love to see a 1500hp street car but don't know you exist. Love the vids man. I'm hype for this gt500 to be finished
Nice build and can’t wait to see you launch her!
You came along way buddy!!!! Enjoy seeing the build!!!
Did you add to your value when you were talking about his cams???
He said a ballpark price for both builds. A ~5k margin off is well within a ballpark of ~60k build. Idk why you're being a dickhead about that.
@@kevinb.3656 he's not being a dick just trying to clarify. Plus they got robbed at 1800 let alone 2500 for cams. Good custom cams are usually under 1400 even from MMR is less than 1800-2500. Most I've ever seen them for was like 1600 or so
Ported heads are 2400 cams are 1500 springs retainers 900 $
That's about what I spent too
L&M NSR cams are $1580
So at minute seven the 2020 predator crate motor @ 25k is starting to look like a huge deal.
I found this very interesting ... thanks for the breakdown.
Glad you enjoyed it!
I honestly don't care the cost, I want to know where the money came from. One minute you were maxxing out CCs at 2,000 and now your spending 40k in 2 months.
I really appreciated your break down. Great info 😩 but I love it 🥰
Awesome now you have a 6 figure mustang 🔥🔥
Nate and itsjusta6 would be good race .
That would be so dope
The stock 302 in the 69 is a keeper but being honest I'd swap in a period correct 5.8L 351 Cleveland but hey keep the good vids coming bro.
When we gonna see this thang on the line rockin? Its basically a dragster now. Let's see what it will do. Im curious.
All I have on my 3v is just a offroad x straight pipe mufflers and electric cutouts that I welded and hardwired into a rocker switch into my dash. I feel cheap 😂
MMR is cheaper then MPR lol
MPR quoted me 9700 $ sleeved the whole package lol
Yeah I just left a very long comment on this subject. Wow there's so much wrong with what we all just watched.
I knew it was going to be bad. When he said the 5.8 was the biggest engine Ford ever put in a mustang and the other motor had 6 to 1 compression.
I’d take that carbon fiber driveshaft off. they snap pretty easily, also you better be putting some weights in the trunk :) its hella front heavy right now
Stock GT500 will spin tires at 80 mph and accelerates to 190 if you’re brave enough. Cars Only problem is hooking up.
You moving to Mexico with this. But still cool
The intercooler is bad ass but I live in wa ,,, heat exchanger and ice box will probably be suffice ..... had the triple pass on my 2009 with the 3.6 and It was solid ....
Wow! Very impressive info. Wow!
I heard Ford put a 7.0 liter (429) in a mustang back in the day. So maybe the 5.8 isn't the biggest?
E.j. Lucas that’s exactly what I was thinking, I knew that ford had a bigger engine but I didn’t want to say anything to make myself look like an idiot
5.8 is the biggest DOHC from Ford
Not the biggest but horsepower wise yes the 5.8 is the fastest in a mustang
@@whatsgood7956 hopefully I didn't make myself look like an Idiot lol
E.j. Lucas I mean, hey, we all do. I agree with you in your statement, and if we’re both wrong. Then we’ll learn together
Do you Remember the 2007 - 2009 Shelby GT500's?...Shelby American Built a Prototype Shelby GT500 Call "CODE RED", this was to be the Future Shelby 1000!
It was Built by Nelson Racing Engines aka NRE located in Chasworth, Ca., it was based on the 5.4L Shelby GT500 S/C Engine and it was a Twin Turbo setup using Both 91 Octane and E85 Custom Fuel System, putting out about 1200HP+/-!
Now, I contacted NRE at that time and asked them what it would Cost to Duplicate a similar setup to a 2013/14 Shelby GT500 with 5.8L and they Quoted me a Price of $45,000.00 at that time!...I am Just Saying!...God Bless America! 😇
Miley is so spoiled💨 She only like the finest 👌🏽
Love your videos dude🔥🔥🔥🔥🔥🔥
where does he work?? or what does he do for a living???
He makes money off youtube and gets alot of shit for free... 🤦♂️🤦♂️ UA-cam is fake news like CNN...
I work for apple and google 🤙🏼
Nate Rider Fr?? That’s awesome man! i’m really surprised you don’t have more subscribers than what you have rn tbh. You’re better than Derek(Blucifer mustang) But you’ll get there. You should do meets with your fans do iphone giveaways 🤤Jk jk haha
has an advanced Medical Degree, Doctor for last 5 years, so he's pulling around 350,000 a year.
Kenne bell are 6200 with the whole kit says it on there menu lol I can have the same build as Nate for 10,000$ cheaper exact same parts ....lol I hav thee exact same car so I don’t know who lied to you 🤣🤣🤣
Joseph Webb he also got the upgraded inter cooler so that cost more. I forgot how much he said in his other video but it probably cost him 8k for the whole thing
I have the upgraded intercooler and a special surprise i havent shown you guys yet
With stock fuel rails still. The shit people believe on youtube. 🤦♂️🤦♂️
Awwww my bad that’s really bad ass that Intercooler is no joke .... nice build very impressed
i have a K/B and complete with 1000 miles on it 3.2L, cost me 4800.
Sooooo sweepstakes giveaway on this built ford tough monster????
Sick ass ride bro my dream car one day but ill gapped that shit lol
Sorry in advance for this long comment. First on a little side note. 5.8 isn't the biggest engine Ford ever used. Not by a long shot but to the more important conversation.
Why in the world didn't you use your heads since you bought a short block? Paying 6k for new heads makes no sense to me. If you were going with new heads. Long block would have been the much better way to go. Most give a warranty on a long block. Short block isn't very common at all.
You also paid way to much for a lot of things. I really wish I seen these videos much earlier to at least leave you something to think a out. I'm sorry but I feel like you were taken advantage of. Obviously doesn't mean that's what happened. So honestly nothing against the shop or people that did help you. I don't know them personally. It's why I said feels like based off much of the information in this video.
For what you paid. You should have an engine built to handle 3000hp. There's completely 5.8 long blocks out there much cheaper that will handle the same power and more than you have now.
I understand it's a 5.8 that came with the ca. So you wanted to stay true to that. So having a 5.0-5.4 built to handle 2500hp+ isn't really relevant here. Was a good option that said still.
You should have never been talked out of the biggest blower either. It's cool you went with kennybell. They make great blowers. I know from experience building cars going back 20+ years. I've tuned many cars with them in the past. Great company and product.
Again that said. Everyone wants to go faster. You get use to the power and you want more. Happens to everyone and you got a motor that will handle more power than I believe the 3.6 will make. Yes I know what they're rated to.
Why someone told you. You would see 25lbs of boost with the bigger blower on your motor at that point is beyond me. If you have the motor you claim with the custom cams and 6k heads that flow a ton more air over stock heads. The motor is going to make less boost by a few pounds depending on how good those heads and cam are. The bigger the engine and the more efficient an engine moves air the lower the boost will be. Exhaust is also a factor. You still make power. It's just achieved with less boost.
This is why when someone tells you they make 25 or 50lbs of boost it honestly doesn't mean shit as far as power goes. Many factors are involved to know the potential power.
There's a big difference between say motor A which is stock. Than motor B that's modified with big cams and high flow heads. If both motors made 28lbs of boost. I guarantee the power is much different between the two of them regardless of the boost being the same.
I'll give you a great example. Where I've seen many people make a mistake. That didn't have the experience or knowledge to know how to pick the right combination.
Motor C you were told made 25lbs of boost in the car but it was never on a dyno. Then motor D made 15lbs of boost with the same blower and again wasn't on a dyno. No other information was available. Can you guess what motor most pick? If you said motor C. That's the one. Not knowing that motor D actually made more power even with less boost. This is why it's so important to understand how and why things work the way they do.
The 3.6 is still not going to solve the problem any better than a 4.2 etc with having to much power. It's going to be the timing and fuel map that dictates how fast and hard the power comes in. The same could have been done with one of the bigger blower. Then later on when you wanted more power it's a simple pulley and tune change and you just add hundreds of hp. Now you need a new blower all together when that time comes for more power and it will lol.
Honestly you should have went with a Procharger like a F1-X etc. It would have given you the ability to make less power now and much more later on. It's more manageable on the street because the boost isn't instant. So the torque is much lower on the hit. If it was an all out race car with good drag suspension and tire it becomes a little different conversation obviously. It's a ton of torque to deal with on a manual transmission setup. Don't remember what you said but I hope it's at least a triple.
I wish you all the luck with it. Hated to be so negative but I'm just being honest.
You and itsjusta6 need to race asap
Gavin's car would blow up on the way to the track. Gavin from itsjustasix is a moron
Great video!
5.8 isn’t the biggest engine ford put in a mustang its the boss 429 which i think is 7.0
The 429 displacement wise yes, but when it comes to actual physical dimensions the 5.8 is massive and bigger than the 429
@@BarnfindGT lol didn't realize outer dimensions was how engine were measured these days!
Lol didn’t realize people still drive 2vs 🙃 but he didn’t define what he meant by the biggest engine ford has put in a mustang 🤷🏽♂️ I only assumed dimensions because i know when it comes to displacement ford has used a 427 and 429 before
@@BarnfindGT of you were as smart as you act you would know an 03 cobra wasn't a 2 valve and a 429 is bigger than a 427. Not trying to argue just facts
You’re reading comprehension is pretty non existent, Did I say a 427 was bigger than a 429? Also Didn’t know it was a cobra looked like a 2v from the profile pic lol
Bro its 168mm TB not a 106mm. Also 64k to build a motor🤦♂️ you can buy a l&M drop in fully built motor for 30k. Plus you have sponsors.. But nice video.
10MilMike lmao you’re crazy I’ve never heard of anyone building a motor with anything close 700 hp for 30K no way
@@icebox829 hope your kidding. My car makes 837/767 to the tires and no where near 30k in the motor.🤦♂️😅😅
@@icebox829 15 GT Premium / Track,700 RWHP with 3.2L Kenne Bell was 40k sooo theres that.
MarcosS197 lol it’s a whole lot cheaper once you start piercing it together little by little...
A little more expensive if you buy crate, but I dunno wtf he’s doing here... I’ve feel as if I’m overlooking something ...cause I just don’t see how he spent 60k for 1500hp.. maybe 2500.... but 1500????
The 5.8 isn’t the biggest engine Ford has ever put in a mustang
What's in a 429 boss mustang? Not a 5.8l
Omg bro! You got bent over! I have all ford gaskets for my gt500 I’m building almost done now. You can get all of the Ford gaskets for under $200, not $800...go to Modular Head Shop! No one is better on these, you can build your short block to 12-1500hp for under $4k, you can get your heads stage 3 new valves springs ported polishes etc.under $4k cams under $1500 closer to $1200... however the ARP you got a better deal because my ARP headbolts were$300 my main bolts w/side bolts $300,,, then billet Accufab timing chains and tensioners $800.... they balance to lower tolerances than anyone $350 cranks rods pistons and return shipping ,,,, I got diamond pistons, Molnar rods King racing and Clevite racing bearings etc. Jordan at Modular Head Shop can get you all this and do the best Ford GT head work ever. Way less.
Nate Rider what are your plans for suspension, to plant the "1500 rwp" to the ground? and for god sakes, you can spend approximately 60k on the engine and cant spend $20 to get that weave cut..lol joking, awesome car !!
Very informative👍
429 ci is the biggest bro and that comes to 7.1 liters
I was thinking 40 when you started out wow thanks for the info though it's amazing
Thats excluding that 15,000 widebody and 2,500 rims and 3,000 wrap 😭😭
ThatRoushGuy $10,000 wheels but yeah the shelby 1000 price breakdown is coming soon
But what if UA-cam decides to kill your channel for some reason? You got rich parents? Awesome car but terrible financial decision.
Lol 64k ?? My buddies Escalade made 1700whp with 427 lsx dart motor with twins 68 mm turbos for under 25k lol
We need the 69 mustang update
And when you are done what are you going to do with it? I'm running stock 300hp S197 GT like this guy used to have and obey the speed limits, doing fine with that. lol.
Miley better be a super beast or I will not see her videos, loved Sally, almost cried after you sold her. LOVE BETTY, come on man start restoring her.
Wouldn’t it be cheaper to buy a 1000r?
Damn how long was you shaking your tail-feather to afford that 😂
Its called no house, no kids, no savings.
@@jdigitalseven7 or daddies cash`
Casually goes and spends $10-15k to build a 2v to make the same power .
I have just read the dumbest comments lol. "Oh this build is the value of a c8 or a new 2020 shelby , what a horrible financial choice to make" blah blah blah. Like he said " you have to PAY to play" how much would it cost to make a new shelby or c8 get the numbers he can achieve off this motor? Already more that 64k. He has built a monster of a car good job 👍🏽
It's not entirely accurate. He didnt do heads or trans, plus he got sponsored by kb and I think hes using the cams that came with his motor. But its definitely an expensive hobby
Also the fluids.
I feel like you don’t know what u talking about tbh😬
that's 8x more expensive than 2012 V6 Mustang
And carmax best offer $13k
My boy is makin bank 🤣💪🏼
That is not the biggest motor ford put in a mustang....the boss 429 was the biggest motor Ford put in a mustang and one other thing I can spend 20k on a built Chevy LS9 and get the same HP
Spends 64k on a motor and says “you gotta pay to play” your insane
Dude the supercharger will fit under the stock hood. Just need lowering brackets. And hoodd don't cost that much. Nigha if you paying 2g for a hood you getting ripped off. I don't were you getting some of these prices from. But hey if you got that kinda money to just be blowing. Fuck it
Only watch 2 people on UA-cam is yours and itsjusta6 :)
José Estrada same lol
damn he got so cool ass parents .
You only live once, have fun!
And then the price of the car 😩 Fords cost too much to build (Don’t roast I have a GT500)
Dylan Heisner it depends what your goal is and what year Shelby .... 2007-2009 very cheap compared to the 5.8s
Heard KB doesn’t tune anybody’s car.
where did he get all that money from?
Dude has a good ass job
whats his job?
@@ryanrussell3893 he works for apple and google
haavox 1337 how do u know?
@@ryanrussell3893 top secret
And I thought my $15,000 417 LS stroker build was expensive I will no longer bitch
Notification squad
Itsjusta6 spent half of what you did to make the same power.
It's also a coyote, the Trinity is better than the coyote imo. But there is definitely a huge chunk of cash this guy spent without using any real logic.
Because itsjusta6 did the labor himself
1/3 the price his motor was about 20k 🙃 coyote for the win but you can build a LS for even cheaper than a coyote so if there’s that too 😂
His built motor was 10k & other 10k on parts
Cookymunster Yes, but I included his Supercharger and fueling upgrades. It would be upwards of $30k.
Cost of car
Power train
Drive train
Chassis
160k
Literally the price of a hellcat
Did you get someone to do it for you ? Sorry I didn’t pay attention
I did it myself
Imagine crashing and insurance don’t even give you why you spent on mods 😭
Lol you definitely can't go with the based insurance with this one
You can buy speciality insurance that will cover almost everything as long as it isn't a daily driver
How on earth are you able to finance all of this?
Cause I know it ain't from youtube payments nor your job. Rich daddy maybe?🤔
Nurullah Savur what kind of question is that .... it’s his business where all grown men not little boys ..... and why does it matter ???
He makes like 3-4K a month just from YT, same thing for his apple job, and his google job and other things that he does...if you save up for a decent amount of time you have a lot of money my dude lol
Work hard somthing you dont do
@@mach183 because all he does is brag up about how much everything costs. We all knew from the start that this was going to be a pricey project. Just built it and show the progress without the numbers.
Nurullah Savur it’s his fucken car, if you don’t like him talking and showing numbers just get the fuck outta here
64k Hmm Not 2much for Somthing iconic Like This..👌👍👍
I allready no how much it cost just on motor alone
Time to start selling my body and drugs......#Goals ......lol Nate you're my hero bruhhhh (@Kill3r_Stang)
Why not get a GT 350 or even the New GT 500 with that money.
cuz they dont have 1.5k hp
haavox 1337 oh ok
64k for that lol might as well just buy a 2020 gt500 😂
Ray _S550 hes able to push 800hp more than the 2020 Shelby
Ivan H maybe but that motor is a 5.8 built motor Shelby is a 5.2 pushing 760hp stock lol
It was definitely worth, Right?
More than worth it
Well...You Tube paid 4 it. 😁😁
A proper green belt cost 100$ and yes I know van personally lol
I bought 5 belts
My gates RPM belt was $76 at O'Reilly
In that case good deal !!!
@@10MilMike what’s up man
@@mach183 ??
Dam. What do you do for a living
lives at home, trust fund, or something close to that.
WoW
you got big BAALLLLLSSSSSSS... congrats man
65k to make 1500 hp holy smokes maybe get a coyote and upgrade it for 15k and will make 1500 hp to much money better race it and bet alot of money and win to recover your 65k investment
Very wrong w this being the biggest motor fords ever put in a mustang. Boss 429.
Now, go wrap it around a light pole. Because there isnt any way that 1500 hp is streetable. Just a colossal waste of money. Like they say, a fool and his money are soon parted....
Somebody really jelly..
1500 hp is 1000 percent manageable on the street ..
You gotta know how the fuck to drive that shit.. I dont know if he can drive but the shit is definitely possible... 405s cars put down 6000+ hp and they get down the road every week...
Fuck you talkin bout
@@jameswalterjr1557 1000%? You know that's not even possible, right? Nevermind, you probably dont know that's not possible....cant put a sentence together without the word f***....cant know a whole lot.
@@divemaster037
Yeah your right I'm the dumb one ..
Cause I'm the one that made a ignorant comment about something I know absolutely noting about..😂😂😂😂😂😂
Fuck you pussy..
Anyone else starting to get annoyed by his voice ?😂
BUT IT'S NOT OVER WITH. YOUR DRIVE TRAIN IS GOING TO BE SEVERELY BEAT UP BY THAT MONSTER LURKING UNDER THE HOOD. IT'S PROBABLY BEST TO REPLACE YOUR DRIVETRAIN COMPONENTS BEFORE THEY BREAK SO THAT YOU CAN SELL THEM IN GOOD CONDITION, TO OFF SET THE COST OF NEW BEEFIER DRIVE TRAIN COMPONENTS, THAT CAN HANDLE THAT MONSTER OF AN ENGINE.
Yikes 😱
thats a whole gt350 lmfao
Holy shit bro
So many financial advisors here 😂 who cares what he buys. He puts it on UA-cam for your FREE entertainment.
If he wants to spend $1,000,000 on a bottle of water who tf cares it’s his money, not yours. Also if he builds a business out of UA-cam he can likely write it all off anyway.
The smarter you spend the more you have to do more with. It's your kind of thinking why so many people are broke today and still live in their parents basement too.
Many people like me also don't like see people being taken advantage of you lack of experience and knowledge. What to see him get grow as much as possible. They're many problems in this video with cost of this build.
Some of use actually built and raced cars for many years and hate seeing young people make mistakes like this.
@@waynebollentin989 there you have it. Spend and save your money as you please, and let him do the same. No one gives you shit for being frugal, so don't give him shit for being flagrant. Especially when it doesn't affect you in any stretch of the manner.
Also, he is stimulating his local economy, so can you really be that upset? If everyone put every dollar they had into funds, savings, etc. who would stimulate the economy? That's a completely different issue, but I don't feel you are ready for that conversation yet.
These types of videos is what gives a young person the wrong idea about automobiles there's no way in hell anyone walking around on gods green earth just been that kind of money in the car they going to drive on the street daily first of all you cannot use all of that horsepower even if it makes that much second of all something breaks and next thing you know you're adding to the homeless numbers ,unbelievable waste of time ,waste of money!
Deep pockets.