350z SPC Rear Camber Arm Intsall + Toe Bolt

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 21

  • @BigRowdy91
    @BigRowdy91 4 роки тому +7

    This video deserves more likes, very helpful, thanks guys, I almost just went "Meh ill throw the camber arms on first and get tow arms later"

  • @samson_BNR32
    @samson_BNR32 6 років тому +5

    dude where did you get your duckbill? ive been searching for it forever and i didnt know you had it!

  • @djnekkon
    @djnekkon 7 років тому +4

    well shown..very clear. If I had to do it from scratch, this would've bee the video to follow.

  • @my93foxmustang1
    @my93foxmustang1 3 роки тому +3

    You dont have to drop the sway bar. Let the camber arm fall and move it side to side for the bolt to come out in an angle

  • @Fastlife250f
    @Fastlife250f 4 роки тому +1

    if I get toe arms with my camber arms will I still have to shave out the toe bolt hole for proper adjustment?? good video by the way

    • @mractive420
      @mractive420 4 роки тому +1

      Yes

    • @pushhrodd01
      @pushhrodd01 3 роки тому +1

      Luis ramos no he don’t dumbass

    • @Fastlife250f
      @Fastlife250f 3 роки тому +1

      @@pushhrodd01 Ty, your right. i been dialed for the last 6 months alignment wise finally. For anyone else seeing this, I recommend just buying all the adjustable arms. Most come with new bushings for the high mileage boys, anyways!

    • @RynoDinero
      @RynoDinero 3 роки тому

      @@Fastlife250f i got toe arms. im bout to get camber arms too. i got true rear coils, is that all i need? im only doing a mild drop for flush fitment on rpf1s.

    • @Fastlife250f
      @Fastlife250f 3 роки тому +2

      @@RynoDinero Exactly, Toe and camber arms, and most importantly...a good alignment once it's all installed. I ended up getting caster arms too but that didn't really do much to benefit me daily driving the Z.

  • @Z33.gi0
    @Z33.gi0 4 роки тому

    Did u reuse the same oem bolts to install the camber arms ?

  • @deadbrinkk4592
    @deadbrinkk4592 5 років тому +2

    Both camber arm and toe arm are the same so you have to get 2 sets to replace the oem toe arms as well.

  • @omjeeo
    @omjeeo 7 років тому

    Wish this video was around when I did mine.

  • @liljohnny5666
    @liljohnny5666 4 роки тому +2

    Do you need to install the new toe bolts? If so for what purpose I currently just have my camber kit no bolts and am wondering if i can just add the arms and leave the toe how it is and take it in for an alignment.

    • @DarkMan2555
      @DarkMan2555 Рік тому +1

      Well, on my G35 sedan, I'm lowered 1.3 inches all around, and the tire shop I took my car to to get an alignment said that I need toe bolts to get the alignment adjusted correctly b/c they said every time they adjusted my Z1 camber arm, it messed w/ the toe, and the stock toe bolt doesn't allow for much toe adjustment on the spring bucket.

    • @DarkMan2555
      @DarkMan2555 Рік тому +1

      The tire shop had to set my camber at approx. -1.5° in the rear in order to get my toe adjusted within spec so my tires don't wear out prematurely.

  • @katcontreras2247
    @katcontreras2247 6 років тому +1

    my 35s doing the exact same shit when talkng about the toe on driver side, thats why im here! why!!! guess im ordering toe arms now since the camber arms didnt correct it

  • @TujungaMaster
    @TujungaMaster 4 роки тому

    Hey brother Ik this video is 3 years old and you haven’t uploaded in 3 years and probably don’t even have the Z anymore, but if by any chance you know where you got that ducktail spoiler from please reply, I’ll be forever in your debt I’ve been looking for that for years man and I just got linked to this video because you have it