Knows his stuff, actually works on cars, doesn't tell us how clever he is, doesn't lecture customers or audience on his pet peeves, just gets on with it
I have no clue why i watch these videos. I do this shit on euros,domestic,and Asian all day long but damn i cant help but watch em😂😂. Car ninja is legit laid back as hell..
Ninja maintaining his composure with all the interruptions. Suggest to always check the wire harness below the rear fuse panel on those E70's for water ingress corrosion. The crimped CAN Bus wires need to be soldered and sealed. Cause all kinds of strange intermittent faults. Water leaks in from the hatch seals..they need to be silicone along with the rear lights.
Jonny, I wouldn't be in a hurry to give that Bentley back to Tyler, he'll probably only try to drive it through the dam on his farm, or something else stupid.
I would love to see you collaborate with the Kansas car tuber's and build a car to race next year at the Kansas Airstrip Attack in Independence Kansas next year. Build a 230 mph 1/2 mile car. That would beat this year's cars. You, Hoovie, Watch Jr Go, Elliott, and the rest of the gang.
I never get to your video this early, because i never know when one is coming out. Jonny, you always crack me up, you should do more video's, you are a great detail oriented mechanic who does things right. I use that BG EPA, and the fuel additive, work's great to keep dgi engine's clean. Thanks for the video. G-d bless.
Heater control valve went bad in December on my 2003 Lincoln LS 3.9. No heat! Dumb mechanic pulled the dash thinking I had a blend door issue and the car does not even have a blend door. I found the heater control valve dirt cheap and put it in myself.
Jonny, what are your feelings on people who don't seem to open the hood ever. On the car with the coolant pump issue, there were leaves under the hood. Either the owner never opened the hood, as you should do to check fluid levels, or the owner opened the hood and couldn't be bothered to clear out leaves and any other detritus. I guess owners like that probably are less careful and have more issues, so that's more money for your shop. 😂
Will never buy any snap-on tools again,, every snap-on tool I've ever had has broken to uselessness, weather it be electronic, electric battery operated impacts, or just a plain old wrench,, never again they all brake...
Starts off with pushing a Bavarian Money Waster...why am I not surprised? haha! And full disclosure...I work for a shop that specializes in MB and BMWs...I know of where I speak!
lots of people don't mind spending more money fixing their car in exchange for luxury, performance, handling, or all of the above. Not everyone wants to drive a boring Toyota or Honda, wish I did cause I'd have a lot more money 🤣🤣🤣
Do u think it’s a bad sign when your independent bmw shop calls u out of the blue and asks how’s your car doing and ask do I need any work done , after I spent thousands of dollars getting work done like 6 months ago should I run for the hills?
Hi ninja, I love the content of your videos and truly appreciate them. I have a viewpoint question if you could please answer for me. I was thinking of buying a BMW Z4. Are these reliable?
I have a 1997 E39, and it's been having an issue where the hazards randomly turn on, the dome lights come on, and the stereo's sound goes completely down to zero. What could be causing this?
What is Dinan on a BMW..some u.s.a. sales pitch rubbish??? Certainly never heard of Dinan in Europe, oh Germany is in Europe where b.m.w are made .. for a reply thank you ...maybe it is an American edition or an American tuning company/ garage????
Yes, if you buy oem. My wife's x5 rear lift struts didn't work and we left it like that for years. I found a couple struts at lkq (finally) for less than $100 for both. Prepurchase inspection listed replacement at $950 5 years ago.
Arghh a mini ..components put together in oxford England , by robots , and job agency workers all on 0 hour contracts , and all on minimum wage, parts are of the lowest quality , I know I have delivered some of these parts from fabricators in the Midlands of England.. some parts from China, good luck with this rubbish of a product ..just buy Italian if you want a European car , which indeed is better than American...
Knows his stuff, actually works on cars, doesn't tell us how clever he is, doesn't lecture customers or audience on his pet peeves, just gets on with it
Smart, fair , funny and honest! One of the Unicorns of the automotive repair industry.
Classic line, wasn’t me it was my wife
My Honda Accord with 225,000 miles. I 'm thinking of a second set of plugs this summer.
Too expensive bro stick with factory plugs
I have no clue why i watch these videos. I do this shit on euros,domestic,and Asian all day long but damn i cant help but watch em😂😂. Car ninja is legit laid back as hell..
Finally you remembered us and post a video. We had missed you.
Ninja maintaining his composure with all the interruptions. Suggest to always check the wire harness below the rear fuse panel on those E70's for water ingress corrosion. The crimped CAN Bus wires need to be soldered and sealed. Cause all kinds of strange intermittent faults. Water leaks in from the hatch seals..they need to be silicone along with the rear lights.
i have a 2011 x5 (e70) if the bottom gate isnt closed 100% the tailgate will no go down.. hopefully thats all it was
Great channel!
Jonny, I wouldn't be in a hurry to give that Bentley back to Tyler, he'll probably only try to drive it through the dam on his farm, or something else stupid.
Haha definitely!
Or give it to April to drive…
Lol
Well a Bentley is pretty much junk from the time it rolls off the line so why not stick it in a pond?
@@stevefirth2013 yeh, I guess that's your opinion, you're welcome to it.
Jonny, if only all repair shops were like you! Thank you for another great video, made my Friday :)
I would love to see you collaborate with the Kansas car tuber's and build a car to race next year at the Kansas Airstrip Attack in Independence Kansas next year. Build a 230 mph 1/2 mile car. That would beat this year's cars. You, Hoovie, Watch Jr Go, Elliott, and the rest of the gang.
2:16 someone in Germany took your shop trip seriously. wonder how many miles it drove
I was wondering the same thing
@@alin-cosminschneider7180 yeah specially that e60 is euro spec and it is inside the 25 year import restriction
Great to see straight ahead competence in regular workflow.
Audi will keep you in business forever
I never get to your video this early, because i never know when one is coming out. Jonny, you always crack me up, you should do more video's, you are a great detail oriented mechanic who does things right. I use that BG EPA, and the fuel additive, work's great to keep dgi engine's clean. Thanks for the video. G-d bless.
Thanks Jonny and Mike for another quality video! Keep up the excellent work.
Its gonna need a catalytic converter after all that oil going thru it.
Cool 😎 video 🎥
You have patience. I had to do plugs on a W222 S550 and front pads and rotors. The rear 2 plugs on each bank were not fun.
Message at the beginning says a lot. I'd send you my summer car from Detroit and take your work as is. Reputation is everything
Heater control valve went bad in December on my 2003 Lincoln LS 3.9. No heat! Dumb mechanic pulled the dash thinking I had a blend door issue and the car does not even have a blend door. I found the heater control valve dirt cheap and put it in myself.
Jonny, what are your feelings on people who don't seem to open the hood ever. On the car with the coolant pump issue, there were leaves under the hood. Either the owner never opened the hood, as you should do to check fluid levels, or the owner opened the hood and couldn't be bothered to clear out leaves and any other detritus.
I guess owners like that probably are less careful and have more issues, so that's more money for your shop. 😂
Yes! That's the first thing I notice- it tells a lot about the owner and the care he gave the car.
That Mini looks…..involved.
Fast. Busy!
Will never buy any snap-on tools again,, every snap-on tool I've ever had has broken to uselessness, weather it be electronic, electric battery operated impacts, or just a plain old wrench,, never again they all brake...
Episode 94, LFG!
I was hoping for a update on Aprils G wagon??
Starts off with pushing a Bavarian Money Waster...why am I not surprised? haha! And full disclosure...I work for a shop that specializes in MB and BMWs...I know of where I speak!
lots of people don't mind spending more money fixing their car in exchange for luxury, performance, handling, or all of the above. Not everyone wants to drive a boring Toyota or Honda, wish I did cause I'd have a lot more money 🤣🤣🤣
Why would you work on brands you don't have passion for?
Do u think it’s a bad sign when your independent bmw shop calls u out of the blue and asks how’s your car doing and ask do I need any work done , after I spent thousands of dollars getting work done like 6 months ago should I run for the hills?
Hi ninja, I love the content of your videos and truly appreciate them. I have a viewpoint question if you could please answer for me. I was thinking of buying a BMW Z4. Are these reliable?
Z4 with M54 and manual gearbox is decently reliable
I was 500th 👍 like
never let your wife drive your nice car!
I have a 1997 E39, and it's been having an issue where the hazards randomly turn on, the dome lights come on, and the stereo's sound goes completely down to zero. What could be causing this?
dont tell
Wait, What was that Dinan 7?
What is Dinan on a BMW..some u.s.a. sales pitch rubbish??? Certainly never heard of Dinan in Europe, oh Germany is in Europe where b.m.w are made .. for a reply thank you ...maybe it is an American edition or an American tuning company/ garage????
I like 2000s Mercedes but its fukn complicated as shit 😂 let alone latest ones
Are power tailgates expensive to repair/replace?
Yes, if you buy oem. My wife's x5 rear lift struts didn't work and we left it like that for years. I found a couple struts at lkq (finally) for less than $100 for both. Prepurchase inspection listed replacement at $950 5 years ago.
@@scottpollard3270 I guessed a grand so I was close. Yikes!
I hate Mini Cooper ! that engine come from french!
Apache is a French word non?
@@Romans828KJV engine components are produced by PSA at their Douvrin, France, facility, with MINI and BMW engine assembly .
@@Romans828KJV Peugeot's engine.components are produced by PSA at their Douvrin, France, facility, with MINI and BMW engine assembly.
Arghh a mini ..components put together in oxford England , by robots , and job agency workers all on 0 hour contracts , and all on minimum wage, parts are of the lowest quality , I know I have delivered some of these parts from fabricators in the Midlands of England.. some parts from China, good luck with this rubbish of a product ..just buy Italian if you want a European car , which indeed is better than American...