DQ200 7 Speed DSG Clutch replacement - DIY - How to.. VW Audi

Поділитися
Вставка
  • Опубліковано 14 лип 2023
  • DQ200 7 Speed DSG Clutch replacement - DIY - How to.. VW Audi
    In this video i go through and show you a How To on how to fit a DSG dry clutch. The tools and kit you need are readily available.
  • Авто та транспорт

КОМЕНТАРІ • 62

  • @graylees-rm1vx
    @graylees-rm1vx 11 місяців тому +5

    Impressed no body would ever of thought u wasn't a mechanic down to the level of perfectionism u show good to c nice one mate.

  • @mikespink1965
    @mikespink1965 5 місяців тому +1

    100% NOT a twat. Fantastic help to allow me to understand how to do this. THANKS SO MUCH!

    • @Roverturbo
      @Roverturbo  5 місяців тому

      What it’s all about. 👍

  • @peterfox6256
    @peterfox6256 11 місяців тому +1

    Very interesting ,not seen inside one of those before

  • @simon2knine
    @simon2knine 10 місяців тому +1

    Perfect job. Did my Audi A3 a few months ago. Used the same tool kits as you. Same clutch pack too.
    Don't know if you watched the LUK video on fitting the Gen 1 clutch kit..It's very good and covers everything.

  • @user-yg5gq1yt4k
    @user-yg5gq1yt4k 3 місяці тому

    Good. And nice

  • @TaylorStylez
    @TaylorStylez 4 місяці тому

    Dude fair play! I think I’m going to give this ago myself…

  • @joelparedes
    @joelparedes 7 місяців тому

    Great great video !!!! 🙌🏻🙌🏻🙌🏻

  • @Mubmoh
    @Mubmoh 9 місяців тому +3

    Great video, in 2 minds to change a DQ200 clutch for a vehicle I am preparing to sell. Car drives fine and shifts gears good as well. Only issue I notice is that theres a 'screech' sound when accelerating from stationary while driving up a hill.

    • @ricardomedinasanchez7244
      @ricardomedinasanchez7244 2 місяці тому

      Hi mate, can share with us the symptoms to replace the clutch? What exactly was doing before getting to the point of replace the clutch...thank you

    • @Roverturbo
      @Roverturbo  2 місяці тому +1

      Stuck in gear and wouldn’t do a basic setting.

    • @ricardomedinasanchez7244
      @ricardomedinasanchez7244 2 місяці тому

      @@Roverturbo, thank you!

  • @dustyfruitypie1633
    @dustyfruitypie1633 11 місяців тому +1

    Fantastic vid, I might be bringing my gearbox to you to change my clutch for me soon. Where did you find all the information on how to do this job as I guess the haynes manuals won't have all these details

    • @Roverturbo
      @Roverturbo  11 місяців тому

      All the info is out there, I just did my homework. 👍

  • @jayanthajayarathna6835
    @jayanthajayarathna6835 7 місяців тому +1

    Thanks for the video, really helpfull. Can you please list all tools you used in this video? Thanks

  • @NovemberV8
    @NovemberV8 5 місяців тому

    Good video.
    18:00 measured 6mm, below 8,00mm means good.
    Pressing down the bearing you should use torque wrench and don't reach 12Nm.
    This laser tool is very user friendly, what is the high of each cylinder?

  • @imarunn
    @imarunn 7 місяців тому

    Good job and in the video you explained great.
    I would like to know do I need to be changed my clutch pack for VW Polo GT TSI 1.2(DQ200 7 speed) clocked 100k kms. My car is running perfectly until I drive for more than a hour or in hill station, a little screeching sound on 1st and 3rd gear shift for 2 seconds, then it runs normal.
    I have scanned my car and all looks fine on screen.

    • @Roverturbo
      @Roverturbo  7 місяців тому

      Thanks for the comments, unfortunately it’s hard to tell from here. Does it look like it’s slipping or flaring when it makes the noise? Ie the revs go up or spike up and down.

  • @viorelgavrila2730
    @viorelgavrila2730 2 місяці тому

    Great job! Thank you for the video! I have a question. I have replaced the gearbox with an used one but the car had gen 2 and the replacement one is gen1 do you think they are compatible? Thanks

    • @Roverturbo
      @Roverturbo  2 місяці тому

      I don’t know for sure, it’s only the clutch forks are different. So I can’t imagine they would be massively different.

  • @excossack
    @excossack 11 місяців тому +1

    Interesting video. Is there a pre video to this one?

    • @Roverturbo
      @Roverturbo  11 місяців тому +1

      It’s part of a project not edited yet. 👍

  • @brianrivers8980
    @brianrivers8980 Місяць тому

    Very informative - did you hit any snags removing gearbox? Did you do it all from your yard?

    • @Roverturbo
      @Roverturbo  Місяць тому

      I removed the complete front end as I had to remove the engine. Yes all at home.

  • @guillermomendez1422
    @guillermomendez1422 10 місяців тому

    hi, awesome work, could you describe the measurements of the tool you use to measure de height? thanks

    • @Roverturbo
      @Roverturbo  10 місяців тому

      The tool does all that?

  • @Paul-zu2he
    @Paul-zu2he 10 місяців тому

    Nice video! Which clutch kit did you buy?

    • @Roverturbo
      @Roverturbo  10 місяців тому +1

      Luk ..the cheapest I could find basically.

  • @liammclaughlin6204
    @liammclaughlin6204 21 день тому

    Did you do a video on the basic settings side? Have one failing on 100 after gearbox replacement

    • @Roverturbo
      @Roverturbo  20 днів тому

      I done it as part of another video I haven’t edited yet. There’s a web page somewhere that shows what the error codes are.

  • @robc5955
    @robc5955 11 місяців тому

    Looks like you did a good job, not that I’d know, but assume as you’ve posted it worked. Noted you didn’t change mechatronics oil, I did recently utter pita of a job via breather and considered it an utter waste of time as at 100k it was exactly the same colour and smell as the new stuff. Anyway just wondered why you didn’t ie did you consider waste of time.

    • @Roverturbo
      @Roverturbo  11 місяців тому

      Yes, car is perfect. This is part of a bigger video series on a car I haven’t edited or released yet. 👍

  • @yasmoh3641
    @yasmoh3641 Місяць тому

    Hi excellent video could I possibly pay you for your help and get my flywheel and clutch changed on a vw golf mk6 2012 🤔

    • @Roverturbo
      @Roverturbo  Місяць тому

      Not sure what you mean by help? These gearboxes are very heavy and pain to get out.

  • @pranayshashank
    @pranayshashank 7 місяців тому

    Quick question! I have a Skoda superb 2010 dq200 gearbox when I press the throttle gently it up shifts without any issue but when I stomp/aggressive push the car it hiccups/jerks a little to upshift what do you think the issue could be?

    • @Roverturbo
      @Roverturbo  7 місяців тому

      Could be anything, even poss a misfire. I’d take it to a local specialist.

  • @Mubmoh
    @Mubmoh 9 місяців тому

    Hey mate, cheeky question. Would you rent out your Laser DSG clutch removal kit? Could help us both out from a financial viewpoint!

    • @Roverturbo
      @Roverturbo  9 місяців тому

      Unfortunately not, I sold to someone else who needed it and I can borrow it back.

  • @pavdark1145
    @pavdark1145 Місяць тому

    Can you please tell me where did you buy these 2 Tool Kits?

  • @sianmorris2327
    @sianmorris2327 20 днів тому

    Hello my boyfriends it’s having clutch slip on his dq200 dsg just wondering where u are from and could u help

    • @Roverturbo
      @Roverturbo  20 днів тому

      I could do the clutch set up. Not really interested in removing the gearbox, they are very heavy, awkward and a pain. South England.

  • @tiaantheunissen6692
    @tiaantheunissen6692 Місяць тому

    Can you please share a link to buy the toolkit from? I'm looking to change my clutches cause the companies I've taken my car to, does not know what they are doing 😮

    • @Roverturbo
      @Roverturbo  Місяць тому +1

      This kit to remove and install clutch.
      www.amazon.co.uk/Transmission-Compatible-Gearbox-Installer-Remover/dp/B09YTV64KC/ref=mp_s_a_1_fkmr0_1?crid=3QN5AKSPGVTZS&dib=eyJ2IjoiMSJ9.IOmQhGfOUrNInT47IXBv2Hexw3qWdOabvGBod-vbOp8.dYDXAWxcFKAqZwPIJXb9giLgk1Fb93X3VQsENQ4K4V4&dib_tag=se&keywords=laser+dsg+kit&qid=1716137751&sprefix=laser+dsg+kit%2Caps%2C108&sr=8-1-fkmr0
      This kit to set the clutch’s, you will need to check if you can buy cheaper else where.
      www.ebay.co.uk/itm/363526253461?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9RtuYQ4-SxO&sssrc=4429486&ssuid=q7_G1vSkR_W&var=&widget_ver=artemis&media=COPY

    • @tiaantheunissen6692
      @tiaantheunissen6692 Місяць тому

      @@Roverturbo Thank you :) really appreciate it

  • @abdurrahimmohdnor9005
    @abdurrahimmohdnor9005 3 місяці тому

    if just change new flywheel, but clutch also old. Must fitting clutch or not.?

    • @Roverturbo
      @Roverturbo  3 місяці тому

      No you should be fine, the clutch unit just locks into flywheel with teeth.

  • @frankyboy6245
    @frankyboy6245 10 місяців тому

    what a geeeza, to big for me, nice vid

  • @RahulKumar-ys7to
    @RahulKumar-ys7to 7 місяців тому

    How many kms after DSG DQ200 starts to fail in general? I am planning to buy a new VW Virtus GT. I am confused between manual transmission 6 gears or DSG DQ200 7gears. What Should I choose any recommendation. I am from India.

    • @Roverturbo
      @Roverturbo  7 місяців тому

      I’m not sure, depends on how it gets driven. Mine had done 100k miles looked fine with plenty of meat left on it but was faulty and had to replace. Maybe because car had been sat for years. I believe the wet clutch 6 speed is more reliable.

    • @RahulKumar-ys7to
      @RahulKumar-ys7to 7 місяців тому

      @@Roverturbo one more question are Naturally Aspirated engines better than turbo engines ?

    • @Roverturbo
      @Roverturbo  7 місяців тому

      Depends on the engine.

  • @shanepatterson1368
    @shanepatterson1368 8 місяців тому

    Why did you have to change the clutch

    • @Roverturbo
      @Roverturbo  8 місяців тому +1

      Car had been standing for a long time, wouldn’t engage gears correctly, I think they was a fault with the clutch pack or rusted up.

  • @chineduogbechie4875
    @chineduogbechie4875 5 місяців тому

    Hi. My golf 5
    1. Loss in communication with tcm
    2. Car would not start

    • @chineduogbechie4875
      @chineduogbechie4875 5 місяців тому

      Why

    • @Roverturbo
      @Roverturbo  5 місяців тому

      No idea, sorry. Impossible to diagnose from here. work it out or take it to a mechanic. 👍

    • @ricardomedinasanchez7244
      @ricardomedinasanchez7244 2 місяці тому

      Mate, that problem is your TCM, replace the complete mecatronic and do the basic setting, then should be go...

    • @Roverturbo
      @Roverturbo  2 місяці тому

      Don’t you think he should check the wiring first? Powers, ground and communication?