THANK YOU!! You're the only video on youtube that shows in detail on how to reinstall the door panel. I had a hell of a time trying to fit it back on over the lock tab and lip but after watching this and following your advice I was able to reinstall it in 30 seconds :)
Superb how to video! Exactly what I needed. I had to watch and rewatch each segment during the removal and installation, but this video guided me through it perfectly. Some how to videos have in them they just leave you hanging on the next step, but yours was extremely clear and helpful! Thank you for making this video!
Thank you for this well made video. But a heads up for other CR-V owners, this video is for the made in Japan CR-V. If your VIN starts with SHS your CR-V was made in Great Britain and the lock, actuator, and plastic inner lock rod guide is different.
This is so true because I have the Japanese spec in Jamaica and I bought the actuator from the UK not knowing there's a big difference between the two, so people please check before you buy.
Thank you! This really helped me complete the job. You made the door handle rod removal look deceptively easy. At least on mine, it nearly took breaking the handle assembly to remove it. I added a little lubricant and it finally came out 225k miles on the original. The only residual issue is it’s a bit more firm to unlock with the key manually. It’s worth checking that things are functioning as they should before putting the whole door panel back on. Took me about two hours. I think it could easily be done in an hour or less if everything goes smoothly.
Great video. I tried other videos before finding this one, which is much better. Thank you, especially for the section at 9:16. I had reconnected the rod improperly the first time and this showed me the correct way!
Thank you for this video. About to start the work on three doors (both rear and front right). Would be 600€+ in a repair shop. Actuators cost 39€ for a set of four
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
THANK YOU!! You're the only video on youtube that shows in detail on how to reinstall the door panel. I had a hell of a time trying to fit it back on over the lock tab and lip but after watching this and following your advice I was able to reinstall it in 30 seconds :)
Superb how to video! Exactly what I needed. I had to watch and rewatch each segment during the removal and installation, but this video guided me through it perfectly.
Some how to videos have in them they just leave you hanging on the next step, but yours was extremely clear and helpful! Thank you for making this video!
Thank you for this well made video. But a heads up for other CR-V owners, this video is for the made in Japan CR-V. If your VIN starts with SHS your CR-V was made in Great Britain and the lock, actuator, and plastic inner lock rod guide is different.
Any tips on what the differences are? Thx!
This is so true because I have the Japanese spec in Jamaica and I bought the actuator from the UK not knowing there's a big difference between the two, so people please check before you buy.
Thank you! This really helped me complete the job. You made the door handle rod removal look deceptively easy. At least on mine, it nearly took breaking the handle assembly to remove it. I added a little lubricant and it finally came out 225k miles on the original. The only residual issue is it’s a bit more firm to unlock with the key manually. It’s worth checking that things are functioning as they should before putting the whole door panel back on. Took me about two hours. I think it could easily be done in an hour or less if everything goes smoothly.
Also, by far the best video available on the job.
Love this video! However I have a question… if you were to snap off a plastic clip on the door panel what should you do?
Thank you, made this job a lot easier, quicker and saved me $258 :)
Very nicely done. My 2004 door looks a bit different, but it's all more or less the same thing. Thanks much!
Great video! The door handle rod got me stuck for a few hours and the position in the assembly @9:27 had me!
Thank you so much for this video. It saved me so much money! Excellent detailed instructions.
Love the detail in this video, very well done. I have to replace the actuator in the front/right door. This video will be a great help.
Great video. I tried other videos before finding this one, which is much better. Thank you, especially for the section at 9:16. I had reconnected the rod improperly the first time and this showed me the correct way!
Thank you for this video. About to start the work on three doors (both rear and front right). Would be 600€+ in a repair shop. Actuators cost 39€ for a set of four
Much appreciated no more manual Key turns Ty Ty
Wow this looks like it will be extremely annoying. Might just pay someone to do mine.
Excellent, EXCELLENT vid.
THANKS!
Great video, nice step by step instructions, thanks
Great Video. Good pace and very clear instruction.
Fantastic video !!!!! Thank you for a very thorough explanation !!!!!
Well done........very thorough!
How do I know if I have the black actuator or the white actuator, they are different parts.
Ty
Thank you for this video
Is this the same video I started watching before I fell asleep, it’s not that it’s not informative it’s just I have no idea what is going on. lol 😂
Yess problem solved thank you sir
1:45 he broke the tab by jabbing it with a screwdriver. You should use your fingers to gently twist it off the bar instead.
I did all my best, I replaced the actuator even the cabling, and I checked, the fuses too, I don’t know what is my problem!
At 5:29 you remove a white plastic part. What it is that? I broke mine and need to get a replacement. Thanks.
Hello i have one door still doing a clic sound but doesnt open
And one who doesnt clic AT all
What do i need ton change
Can this video help me unstuck my key in the lock?
You have all these wonderful ideas but its hard to enjoy it bc the music is so terrible and distracting