ahahaha "if you don't like your waterfall rip apart and do it again" this is honestly the biggest truth of it all...I did my pond last year and this year i ripped apart my waterfall cause i was so disappointed with it. Even though I worked hard on it , it felt even better to rip it apart and start over. Good info i hope others take that into consideration too.
Hi Xavier, Thank you! No, on this pond, the main circulation is the “cross flow” from the waterfall, which is on the opposite side of the skimmer filter. I do have a pond power head that can be moved around the pond and help improve circulation. Ecosystem ponds don’t use bottom drains, mainly because the gravel would clog it; the benefit of having gravel, besides looks, is 2 fold: it exponentially increases surface area for beneficial bacteria, and the koi like to forage & root around in the gravel.
I have water flooding my yard. I found where it’s coming out of the ground on the hill, I’m trying to figure out if to redirect it into a waterfall landscape and send it out the way it been flowing so my yard isn’t flooded all the time and I have a beautiful landscape. Any advice, I’m thinking PCP pipes somehow where the water comes out to redirect it
Sounds like you have a spring. I would try to build a dry creek bed, which is like a pondless waterfall, but with underlayment fabric, instead of liner. That allows the water to soak into the ground. That’ll direct it somewhat where you want it to go. That could be SO cool! So much opportunity to grow plants in that situation. Maybe an aquatic plant garden, but in the ground? Id google who your local certified Aquascape contractor is, and get their opinion actually seeing it in person.
So there is a skimmer box that has the pumps draw in the water, and then tubing is attached and glued to a ‘flex pvc’ pipe, which takes it up to the waterfall filter and then back down and so on. The filtration rate can be measured by how quickly this happens in your pond.
Hi Cesar, I actually haven’t covered that. If you want to use really big rocks, you’d need and excavator and a rock strap, and/or a “dingo” type machine. For this pond, the heaviest boulder was 150 pounds, which I didn’t pick up, I just tipped over wheelbarrows and carts to get it in and out of my truck and then rolled it into place. I stacked slate for the lower shelf, and the rest of the boulders I used 💪🏼 Thanks for your comment!
@@TheBarefootedGardener Appreciate the reply! I bought a few bigger heavier rocks just for my garden and having to place them in the best possible way, after repeatedly moving them around, adding soil, removing soil was exhausting. The rocks used for your pond look bigger than the ones I used so how long did it take before you were satisfied with the placement?
No problem! It is exhausting work, definitely. Most of the boulders were about 100 pounds. Regarding rocking in the pond- waterfalls are a bit more detailed- generally, I’ll either hand pick a rock for a specific use like for a focal point stone. for the rest of the pond I’ll only mess with one particular stone two or three times to fit it in, and move on to another one. That will take less time as you continue to work with rocks, and especially if you observe nature and how water interacts. So making sure you’ve got a good assortment of stone is also important. It’s very much a process of “getting in the groove” which is when progress (and time) really starts moving.
You need to take your own advice on "ripping your waterfall apart" and starting over. Your spillway rock is too flat and unnatural looking. Also having the ring of rocks around the top and also at bottom by the pond are too conventional. I see that this video is 4 years old, and I believe that techniques have changed a lot. Watch some Aquascape videos for inspiration. Your foaming info is very helpful.
Hi Carole, I’m glad that the foaming info is helpful. Yeah, that waterfall is at my parents house and I’ve said so many times that I could rebuild it better, but my parents are happy with it- so🤷🏼♂️
ahahaha "if you don't like your waterfall rip apart and do it again" this is honestly the biggest truth of it all...I did my pond last year and this year i ripped apart my waterfall cause i was so disappointed with it. Even though I worked hard on it , it felt even better to rip it apart and start over. Good info i hope others take that into consideration too.
Very good information, your pond always looks beautiful.
Beautiful Waterfall and Garden good job my friend🌱🌴👍
Thanks for your showing us this natural like waterfall building .
Great job 👍
Thanks Greg!
It is very nice ot have someone explain what the foam is and what it does. Thank you.
You’re welcome; my pleasure!
Great video!
Very good initial information to make a Cristal clear fish pound
Thanks Gopal!
Thank you bro Good and smooth explained content
Thank you! Glad you enjoyed.
This was pretty cool
Great video. Do you use any bottom drain or return jets on your pond?.Thanks
Hi Xavier,
Thank you! No, on this pond, the main circulation is the “cross flow” from the waterfall, which is on the opposite side of the skimmer filter. I do have a pond power head that can be moved around the pond and help improve circulation. Ecosystem ponds don’t use bottom drains, mainly because the gravel would clog it; the benefit of having gravel, besides looks, is 2 fold: it exponentially increases surface area for beneficial bacteria, and the koi like to forage & root around in the gravel.
@@TheBarefootedGardener Thank you for your answer
Great video dude. Thanks to share
I have water flooding my yard. I found where it’s coming out of the ground on the hill, I’m trying to figure out if to redirect it into a waterfall landscape and send it out the way it been flowing so my yard isn’t flooded all the time and I have a beautiful landscape. Any advice, I’m thinking PCP pipes somehow where the water comes out to redirect it
Sounds like you have a spring. I would try to build a dry creek bed, which is like a pondless waterfall, but with underlayment fabric, instead of liner. That allows the water to soak into the ground. That’ll direct it somewhat where you want it to go. That could be SO cool! So much opportunity to grow plants in that situation. Maybe an aquatic plant garden, but in the ground? Id google who your local certified Aquascape contractor is, and get their opinion actually seeing it in person.
Very good information
Thanks Gopal!
Well done, thankyou...
Please i need a video on how to make my pond STEP BY STEP
Aquascape has videos on the 20 step process, I’d check them out.
This water will be recycled and how?
So there is a skimmer box that has the pumps draw in the water, and then tubing is attached and glued to a ‘flex pvc’ pipe, which takes it up to the waterfall filter and then back down and so on. The filtration rate can be measured by how quickly this happens in your pond.
I'm not sure if you covered this already in another video but what equipment did you use to place the heavier rocks?
Hi Cesar,
I actually haven’t covered that. If you want to use really big rocks, you’d need and excavator and a rock strap, and/or a “dingo” type machine. For this pond, the heaviest boulder was 150 pounds, which I didn’t pick up, I just tipped over wheelbarrows and carts to get it in and out of my truck and then rolled it into place. I stacked slate for the lower shelf, and the rest of the boulders I used 💪🏼
Thanks for your comment!
@@TheBarefootedGardener Appreciate the reply! I bought a few bigger heavier rocks just for my garden and having to place them in the best possible way, after repeatedly moving them around, adding soil, removing soil was exhausting. The rocks used for your pond look bigger than the ones I used so how long did it take before you were satisfied with the placement?
No problem! It is exhausting work, definitely. Most of the boulders were about 100 pounds. Regarding rocking in the pond- waterfalls are a bit more detailed- generally, I’ll either hand pick a rock for a specific use like for a focal point stone. for the rest of the pond I’ll only mess with one particular stone two or three times to fit it in, and move on to another one. That will take less time as you continue to work with rocks, and especially if you observe nature and how water interacts. So making sure you’ve got a good assortment of stone is also important. It’s very much a process of “getting in the groove” which is when progress (and time) really starts moving.
Masya Allah.....So Beautiful
Hi I’m Ryan (kid that’s making a pond) I subbed
Pls make a video of water quality
Hope this helps Gopal!
The Secret(s) to Keep Your Pond Crystal Clear | The Barefooted Gardener
ua-cam.com/video/KQH6Kv6VJeM/v-deo.html
You need to take your own advice on "ripping your waterfall apart" and starting over. Your spillway rock is too flat and unnatural looking. Also having the ring of rocks around the top and also at bottom by the pond are too conventional. I see that this video is 4 years old, and I believe that techniques have changed a lot. Watch some Aquascape videos for inspiration. Your foaming info is very helpful.
Hi Carole,
I’m glad that the foaming info is helpful. Yeah, that waterfall is at my parents house and I’ve said so many times that I could rebuild it better, but my parents are happy with it- so🤷🏼♂️