How To Make Props: Maka's Scythe from Soul Eater
Вставка
- Опубліковано 24 лют 2016
- Hey folks, this is a how to for the Soul Eater Scythe. Prop might be difficult for some since you will need a bench grinder with a 1/4" wheel, not cheap. I do sell these on ebay and etsy, so no worries if you don't have the tools.
eBay:
www.ebay.com/itm/Makas-Scythe-...
Etsy:
www.etsy.com/listing/10594755...
Patreon:
/ minatek616
Things you'll need:
Bench Grinder with 1/4" wheel
Pen
X-acto knife
1/4" MDF (hardware stores)
PVC Primer and Cement
1/2" pvc pipe about 8 inches
3/4" pvc pipe about 5 feet
1 1/2" pvc pipe about 6 inches
3 x 1 1/2" pvc couplings
1 1/2" pvc cap
1 1/2" - 3/4" pvc reducer bushing
Styrofoam sheets, red, white, and black (craftstores)
Jigsaw
Drill
Painter's Tape
Brush Paint Primer
Spray paint (Rustoleum): Primer, Aluminum, Semi-Gloss Colonial Red, Semi-Gloss Black
Superglue
Scissors
Blade outline:
minatek616.deviantart.com/art/...
The Jellybane on Amazon:
read.amazon.com/kp/embed?asin...
Music: www.purple-planet.com
Any question, feel free to ask. Like if you want to see more! - Розваги
Hello! I'm trying to create this scythe but I'm having a bit of trouble. If you don't mind, how many inches is the gap on the blade where the pvc pipe goes? I printed out the sketch you linked but it came out a lot smaller than it was supposed to and I used all of my ink😂😭. Thank you so much!
Just make sure the gap is wide enough to pass the pvc coupling smoothly
through. Just wide enough though, don't want it too wide. Good luck!
the blade must be longer
Yeah it should
Yes
I just make this with steel and i only use this for revenge and halloween only
I always wanted a scythe! thank you so much!
Glad it helped ^_^
Nice
tysm 💗
If the length of the blade is 32'', how long should the end of the blade that connects to the piping be? Thank you in advance.
Yikes I'm commenting in 2019 but I am in need of help. I am making a scythe but from a complete different anime. I'm trying to make Zack Fosters scythe from angels of death. I already have the foam board and everything but I don't know what to use for the stick part and how to put it together. Please help 🙏
I don't use foam board, so this might not work, but I'd use pvc for the haft, cutting a slit in it for the blade, and then use some screws to hold it in place.
@@KenBowyerByDay pvc pipe I see. Are there any other alternative ways to make it cause the convention I'm attending is strict on prop making
@@lynx4272 I'm sure there are but that's how I would do it. I don't know the rules of your convention, but if they complain about steel screws, you could use aluminum post screws to get around it.
@@lynx4272 made a new video that might help ua-cam.com/video/u3ounjrZQpQ/v-deo.html
I want to make the blade out of wood, would that be too heavy?
thank you so much!!! i personally don't want to make this specific scythe, though it is amazing, your tutorial is helping me make my own scythe for halloween!!
but how do i print something on multiple sheets of paper so that its 32 inches long
I have a question.. If I were doing a shoot and I needed to spin the blade and ya know pretend to use it would it be stable enough and not fall apart or break while I'm swinging it around?
+sorryimarianna :3 if you build it right and glue all the parts together, it shouldn't be a problem.
like how he expects us to have all of this
If I draw it what would be the width of the wood?
I'm sorry, I'm not quite sure what you mean. I suppose the width would be as long as you drew it to be, though it you refer to the material's width, the fiberboard I use for the blade is 1/4 of an inch thick.
i have a question about how to print out the blade outline . i downloaded the outline to my laptop and i was wondering if there is a specific way to print it out?
Did you ever find out how to print it?
If you don’t mind me asking, how long should the couplings be? It said 3 x 1 1/2, but I’m pretty sure it means the quantity and not the length.
The couplings should be about 3 inches each. These are not the repair couplings.
Hello! I’m a bit confused on how to print the download because it’s only showing the middle piece. Is there a specific way to print it? Pls lmk asap i may need it for an assignment 😭 tysm for this amazing tutorial!!
I'm guessing you mean the middle piece of the scythe blade. This may mean your printer is looking to print the blade over several pieces of paper because of it's size. If that is the case, I would check your print settings.
@@KenBowyerByDay it’s only showing the middle of the blade without the rest no matter what I try thank you though!!
@@KenBowyerByDay I FINALLY GOT IT
I want to make one for my maka cosplay, about how much does it cost to make it?
+Chloe Anne That really depends on what you already have tool wise, if you only need the materials, probably around 15 - 20 USD
+Ken "Bring It To Life" thank you, this is the best tutorial I have found
+Ken "Bring It To Life" I already have most of the tools
+Chloe Anne Good luck! ^_^
So witch hunter mode
The Link with the design don't work help!
Try going to my deviant art page, minatek616, and checking in my scrapes for it.
how can i print it big ?
That will depend on what program you're using. If you have MS Paint, you can use the print options to make it as big as you want.
*nerdgasm*
+birdman the bird :p
My dad already made me one a wooden one Its made of a diaginal tree.... My dad cut down a tree.....