I respect that at the end you admit you f*cked up and should have listened to your gut and just pulled and rebuilt it first instead of running it. Takes a big man to admit when he is wrong and is super rare on youtube so thank you for being honest and just chock this up as a life lesson and move forward. There are other good 460s out there and you won't mess up the next one.
@@RWO555 Maybe the time to pull it out would have been when you found metal particles in the oil - that wasn't gonna get any better, that's for sure. Oh well, in this life, you never stop learning ... .. .
14:14 When he did the first crank and a little juice flew out, that was pretty funny, but I figured that was probably most of it. I’m glad I was wrong because that was peak content!
There is a bright side to this Dalton. It's not very often you get to hear an engine die on yt. I may or may not have heard several over my years on this planet, but that's the first V8 I've heard go jiggy jiggy clunk.
@@gabrielv.4358 yeah, but a lot of those are people doing extreme stuff or high performance cars. It's rare you see a stock car like this just running and going poorly.
I must have missed something, what's the story behind "again"? He mentioned how concerned he was a few times. Edit: also, brother, if I'm not mistaken, we have the last name...
Those heads, with their rockers and pushrods will go straight on a truck 460. You’ll gain compression too, since D0VE heads have 75cc chambers, compared to the 95cc ones on later smog heads. You’ll take a 73+ 460 up to around 9.3:1 compression from the original 8:1. So it is definitely worth rebuilding those heads.
Tough one brother. You win some you lose some. Those Mark III's had a crankshaft driven power steering pump with no belt. As I watched the video I was wondering how that would work out in the Torino. I guess the world will never know.
Valve got stuck open piston hit it and ended up dropping valve and reason it failed, valves get stuck when they sit outdoors for a long time, it wasn't anything that was abnormal, it was from sitting. He actually was correct when he notice valve wasn't closing as blew back out carburetor. It was seizing open and piston hit and snapped valve off stem as he was running it. Unfortunately you can't compress a valve, so piston and rod also broke. It was definitely a interference motor.
I could never understand why people prefer to work on filthy machinery when a few minutes of cleaning can make things safer and easier to diagnose. Guard your health so we can enjoy more of your adventures. Thanks for making great content!
Not to make you feel bad or anything but I would have loved a video of you yanking, rebuilding, and putting the engine in the Torino just as much or more as this video. All you had to do is say, "I don't want to mess this one up so we are going to pull it, strip it and rebuild it so we KNOW it runs." and we would watch it.
@@murkywaters7185not charging.... they're hydraulic wipers. They run off the power steering pump. So as the power steering pump spun faster, it made the wipers move faster.
Please dont give up on the Ford engines big man 🙏 been a while since we've seen a dingleball rebuild on the channel, pulling another 460 would be a great candidate for that
That's part of what makes this channel so good. Even when things don't go as planned it still makes the cut. Sorry about the engine, but great video. Made my morning!
You need some “I Hate 460s” merch! They seem to be your nemesis. Judging by the truckstop coffee quality oil, that problem likely existed before you even cranked that. Funny thing, between watching JYD and this video, I’ve seen about four of these old Lincoln’s on marketplace. Good thing I can’t convince my wife to let me buy one!
Buddy that was a real downer for u on the 460...But it was a Real + Good episode of a hard working/ mechanic/ utuber , you have the best Friday nite episodes ,look forward to them, you remind me of a young me , I did the same stuff as u but in the late 1970's 80,s 90,s ... big R from Calgary Canada 😊
Ever notice that when you are extra careful, like a penetrating lube mix to protect the cylinders, that's when unusual shit goes wrong? I can't count the times without taking my shoes off that I've taken extra precautions and had a vehicle shit the bed big time.
@1:52 I am proud of you actually. An ounce of prevention is worth a pound of cure. We don't need you catching rat plague again. I hope others learn from your example so they don't damn near die over a car restoration video.
Hey Dalton, your videos are a great therapy for me, I wish I had the chance, the tools and the time to engage in something like that but at the moment I am very grateful that your videos give this veteran a moment to escape from depression and the daily mayhem that we go thru. Really. Thank you so much!!
This episode is amazing. Started off with bullet holes in the trunk. Then adding “drain holes” to the floor. And the. Bashing the heater core to smithereens because… Ford!!! I just recently finished doing a head job on my 1969 Mercury Marauder which has almost exactly the same engine layout and heater core/blower box setup and I ran into the exact same problem and 90% of the battle was just trying to get access and room to do the work.
Videos like this are good reminders that sometimes it all just goes wrong. I had the same failure in an old VW engine I had revived. I was about to test drive it after doing a ton of work to it and the head popped off of one of the exhaust valves and stopped the whole show.
A 1:40 into the video....."I am going to dispose of it in an environmentally friendly fashion that you will not see." I fell out of the chair laughing and in my mind when you said that i was thinking BURN PILE.
You really don’t have great luck with those 460s, a 4:29 would be neat, but I think your idea of a 400 Pontiac going in your Torino would make amazing content! It would make both the Ford and GM guys cringe but I bet there’s a lot of of us out there that would love it. Lol
I was laughing the majority of watching this video. Not getting the plague, mental health and restoring a Mark III, every bit of the humor was very hilarious. Probably one of the best made videos to date. That really sucks with the 460 DOve motor blowing up. Hindsight being 20/20, it probably would've been better to remove the engine and rebuilt it. But it was most likely hecked before in 1985. Possibly another block out there. If you did a video on the heads, I'd watch that.
The best penetrant I've ever seen is mint oil and diesel. I first ran across it at the railroad museum I volunteer at, one of the guys got some mint oil from the farm where he works. I was blown away at just how effective the stuff is, it eats through anything! You can buy the mint oil online in big containers, and it's not too horribly priced. Another great video Dalton! I about died laughing when you busted out the 'hole punch'! 🤣 Keep up the great work brother, you are not only entertaining (and educational), but you are inspiring a lot of people to get out there and wrench on old iron. Thank you brother! 🤘
It was scary listening to the way it was running and sounded ! Always love the content! Look forward to it every week ! I think you should save that motor ! Do a special on it !
Well, I just witnessed a land yacht (named the Widow Brown's Inn) receive a complete detoxification by the Michelin Man 😂, to complete engine failure (typical Ford swallowing a valve. I can say that, Because it's happened to me a gazillion times). All in the glory of a day in the life, of Polebarn Garage! Epic! You're right Dalton, there's a first time for everything, but at least it was a Ford, and not "A JAGG" that locked up on you! I definitely love being a member of the low buck club, and I DEFINITELY WOULD RECOMMEND IT TO EVERYONE!!! Thanks again for another great video!!😎🇺🇲🇺🇲🇺🇲
@15:10 The wipers coming on reminds me of "Monty Python and the Holy Grail" When the body collector is saying "Bring out your dead!" and a man is trying to bring out his elderly father, who says "IM NOT DEAD!" LOL. That car is trying to say IM NOT DEAD! LOOK AT ME! I HAVE WIPERS! LOL
Absolutely love these 70s lincolns but when those frames go there's pretty much nothing you can do and theyre scrap lol The interior/trim bits and bobs are pretty valuable though (because nobody bothered to part them out because nobody bothered restoring them)
That old engine was begging for mercy from the start. But just like the lion tamers of old you beat that thing into waking up and putting on a show to the death. When it sounds like a bucket with a brick in it while it's running, that's never a good sign. As always, you never disappoint.
Dalton, I and others in the comments agree. Especially when you care about making something even kind of nice. It's okay to just do the "less interesting" video of pulling and rebuilding the engine. Glad to see you avoiding plague and caring the smidge more about safety. As much as we like content, heartbreak and/or death would be so much sadder than a slightly less interesting video.
Those heads are the good part anyway. Rebuild the heads and buy a later model 460 off market place and throw a set of flat tops, a new cam, a Weiand stealth intake and those heads, then slap it into your Torino.
Now that you have the D0VE heads I'd take 1 of the other 2 smog 460s and with some better pistons camshaft have a great engine or the Cadillac bronco creation Kevin owns has a domed piston 460 in it
I'll be a safety Karen: my dad was a painter for decades and couldn't count the number of painters he knew who died of pancreatic cancer because they did stuff like grinding (probably lead) paint, and inhaling other toxic chemicals for years.
I get how d*mn annoying it is to have people chasing you around cutting into your time with PPE. I'm technically the Safety Officer for our shop. Two days after that task was added to my management responsibilities I had a trailer fall on my foot thanks to an improperly secured folding jack. I wasn't wearing steel toe boots, instead it was Nikes, and I was now looking down at one crushed toe and another hanging by strand of skin. I see a lot of it as a necessary inconvenience now. I'm glad to see Dalton, who I respect and enjoy watching, looking out for himself👍🏼
@@rubinthomas8586 We all love to see Dalton not be completely cavalier towards his life. He's a smart guy, a good dad and a capable mechanic. The world needs more Daltons, not less. That sounds terrible about your foot, I hope it was salvageable?
@@samragsdale2301 yep, just lost the middle toe, and the one on the right of it (this is my left foot) looks like a smashed grape, which is just funny. I call them Nubbin and Grape. I actually hobbled into work the next day. The look on my bosses face (he's also a friend) was priceless 🤣 👌 Thanks for asking👍
I do it now. But I began in a different time. I've done my time being a lab rat. No, I will not complain, why would I? I'm sure the 1,000,000 🚬 will get me first. 💥 KIDS! DO AS I SAY, NOT AS I DO. OR MY FOOT GETS BROKE OFF IN YOUR 🫏 .
"I brought your hole punch" - You proceed to give the Lincoln the John Wilkes Boothe treatment.... lmfao.... never change, Dalton
I have not laughed out loud like that for a long time, that was frickin hilarious!
@@Opticaldelusion1008 it seemed appropriate(ish) considering the Ford Theater that this episode was
Lmao
That was my favorite part too
Perfect definition of a hole punch freaking great 😂
I respect that at the end you admit you f*cked up and should have listened to your gut and just pulled and rebuilt it first instead of running it. Takes a big man to admit when he is wrong and is super rare on youtube so thank you for being honest and just chock this up as a life lesson and move forward. There are other good 460s out there and you won't mess up the next one.
@@RWO555 Maybe the time to pull it out would have been when you found metal particles in the oil - that wasn't gonna get any better, that's for sure.
Oh well, in this life, you never stop learning ... .. .
ha ha ha ha you've got to be kidding me
$950 for a good wiper motor is not a bad deal in today's economy. Great video, thanks! Cheers! 😎👍🏎🏁🏁
The grill is worth some bucks too.
They use hydraulic power wipers of the power steering
@@V8Power5300 Exactly! So, he has PS and wipers. He'll have his money back in no time! 😎👍🏎🏁🏁💰💵
That is one hell of a wiper motor. It outlasted that 460!
Dalton I have to be honest. All I can focus on is the wipers working stupendously during this “will it fire” segment
Amen to that!
Their ability to just keep going and going and not actually clean the window at all is a miracle that's for sure.
Exactly
I wonder about the lighter ?
Ah yes, the express pneumatic hole punch. Got me a few of those
That's been one of my favorite features of this channel. It recurs periodically, and it gets a laugh out of me every time.
I had a few too. I lost mine in a boating accident. 😂
you can hear the faint cry of oliver with every shot
Essential item.. Sadly not available in the UK.
"I brought the hole punch" was a great line.
Would still love to see you do a total rebuild and give that Torino the 460 it deserves even if you gotta work for it
"If you have a mental disorder and are restoring a lincoln mark 3 for some reason..." 😂😂Best line yet.
Angus is like "what did he say?"
I Love the Mark III... and i probly am retarded too
14:14 When he did the first crank and a little juice flew out, that was pretty funny, but I figured that was probably most of it. I’m glad I was wrong because that was peak content!
hell Dalton i would watch you pull a motor and rebuild it
Yep, I would too
Same
Yep me too
He did rebuild the engine in JD's car that they built together.
But yeah, I vote for engine rebuild as well, I loved it.
Me too
I feel the pain when Dalton noticed that the engine was junk too.
Crazed Dalton with the Sawzall is how we all feel 8 hours into the "quick 2 hour job"
We've all been there. "It'll take about half an hour, dear."
Laughed way too hard when he yelled out FORD trying to get the cylinder head off.
There is a bright side to this Dalton. It's not very often you get to hear an engine die on yt. I may or may not have heard several over my years on this planet, but that's the first V8 I've heard go jiggy jiggy clunk.
if you search theres plenty of "engine blowouts" (i loved as a kid but now i have ptsd from that and hate it with all my soul)
@@gabrielv.4358 yeah, but a lot of those are people doing extreme stuff or high performance cars. It's rare you see a stock car like this just running and going poorly.
Power washing?, bug bombing?, sanitizer?!... you've gone Hollywood on us 😂
And creating some murican style draining holes.
😂
I’m glad Angus sent you a parts list, that’s what I’ve been thinking the whole time so far.
'Tragedy Bingo' is fantastic. I think the whole shop is gonna play that whenever we gotta tear apart a vehicle to see what's wrong 👍🏼
The Windshield Wipers cheering him on was great!
"Not getting the Plague again"🤣🤣 I choked on my sweet tea when you said that!!
I must have missed something, what's the story behind "again"? He mentioned how concerned he was a few times.
Edit: also, brother, if I'm not mistaken, we have the last name...
@@Banryu95 Dalton got really sick a few episodes back, got a shit ton of rat nest to the face.
@@Banryu95 rusty scout will it run. the mouse poops damn near killed him.
@@Brian-Gribbleseriously sick doesnt quite hit right, i mean he landed in the hospital and took nearly a weak after to get back on his feet fully
@@patriotgarage i thought he got lyme disease? isnt that mainly from ticks?
Those heads, with their rockers and pushrods will go straight on a truck 460. You’ll gain compression too, since D0VE heads have 75cc chambers, compared to the 95cc ones on later smog heads. You’ll take a 73+ 460 up to around 9.3:1 compression from the original 8:1. So it is definitely worth rebuilding those heads.
Up
What did we learn on PBG today?
How not to get the Plague and how to make drain holes in a matter of seconds. Get this man the Noble Prize! ❤
Also to wear safety goggles in case there's good compression...
Not to be confused with the Nobel Prize.😂
@@JoeBattle I didn't see that! Well spotted! 😆
At least the heads are good
"I brought your hole punch"
*POWPOWPOWPOW*
that had me laughing my ass off at work🤣🤣
It was me, I was the one who told you about enzyme cleaner!
I'm really glad you're looking after your pneumonia makers ^_^
What is the brand?! Going to buy some.
That sucks bud but we would happily watch you pulling an engine and tearing it down just as much as a will it run video. Cheers bud!
Tough one brother. You win some you lose some. Those Mark III's had a crankshaft driven power steering pump with no belt. As I watched the video I was wondering how that would work out in the Torino. I guess the world will never know.
That grill has got to be saved. It's the nicest thing on the whole dam car
It’d at least make some good wall art.
I have never seen a 460 fail like that before, it would be interesting to know the history of it. Wow
Valve got stuck open piston hit it and ended up dropping valve and reason it failed, valves get stuck when they sit outdoors for a long time, it wasn't anything that was abnormal, it was from sitting. He actually was correct when he notice valve wasn't closing as blew back out carburetor. It was seizing open and piston hit and snapped valve off stem as he was running it. Unfortunately you can't compress a valve, so piston and rod also broke.
It was definitely a interference motor.
I could never understand why people prefer to work on filthy machinery when a few minutes of cleaning can make things safer and easier to diagnose. Guard your health so we can enjoy more of your adventures. Thanks for making great content!
Yea! PBG for the win!!!
That old Lincoln brings back memories, good memories!!!!
Not to make you feel bad or anything but I would have loved a video of you yanking, rebuilding, and putting the engine in the Torino just as much or more as this video. All you had to do is say, "I don't want to mess this one up so we are going to pull it, strip it and rebuild it so we KNOW it runs." and we would watch it.
Would rather watch that than what this episode turned into.
@@Lawdog652I think he couldn’t let it win
Thank you for being REAL and showing us when it "Just isnt your day" For what its worth I enjoyed watching.
LOVE HOW DALTON WENT ALL ELVIS PRESLEY WITH THE "HOLE PUNCH" LOLOLOLOLOLOLOLOLL
not all heroes wear capes
it may not be Elvis's Pantera but it now has the matching experience
i think it's fair to say you got a really good wiper motor out of the deal.
Well Dalton at least The Wipers worked really good 😂😂😂😂
Those things get the mvp award 🤣
I wonder if angus needs the wiper motor. it's well tested.
When they sped up with the engine running it showed it was charging! 😊
@@murkywaters7185not charging.... they're hydraulic wipers. They run off the power steering pump. So as the power steering pump spun faster, it made the wipers move faster.
and never stop working
Sorry it didn't work out for you! 😥😥😥 I was super impressed when you bothered to gap the plugs and lube the cylenders too!
Please dont give up on the Ford engines big man 🙏 been a while since we've seen a dingleball rebuild on the channel, pulling another 460 would be a great candidate for that
This careless operation of power tools along with the commentary is hilarious!😂
Yeah areal riot🙄
That's part of what makes this channel so good. Even when things don't go as planned it still makes the cut. Sorry about the engine, but great video. Made my morning!
You need some “I Hate 460s” merch! They seem to be your nemesis.
Judging by the truckstop coffee quality oil, that problem likely existed before you even cranked that.
Funny thing, between watching JYD and this video, I’ve seen about four of these old Lincoln’s on marketplace. Good thing I can’t convince my wife to let me buy one!
Man I love these flashbacks you make in your videos. @27:10
Buddy that was a real downer for u on the 460...But it was a Real + Good episode of a hard working/ mechanic/ utuber , you have the best Friday nite episodes ,look forward to them, you remind me of a young me , I did the same stuff as u but in the late 1970's 80,s 90,s ... big R from Calgary Canada 😊
Rough day at the office, we all have them. I would certainly watch a 460 rebuild video if you find another one
"I brought your hole punch" "thanks" had me dying
Dalton you buy these cars so we don’t have to. Thank you for your service sir.
Ever notice that when you are extra careful, like a penetrating lube mix to protect the cylinders, that's when unusual shit goes wrong? I can't count the times without taking my shoes off that I've taken extra precautions and had a vehicle shit the bed big time.
8:50 jess- "i brought your hole punch" lol.
Holy shit I lost it at that part hahaha
@1:52 I am proud of you actually. An ounce of prevention is worth a pound of cure. We don't need you catching rat plague again. I hope others learn from your example so they don't damn near die over a car restoration video.
Hey Dalton, your videos are a great therapy for me, I wish I had the chance, the tools and the time to engage in something like that but at the moment I am very grateful that your videos give this veteran a moment to escape from depression and the daily mayhem that we go thru. Really. Thank you so much!!
Favorite part is the black and white foreshadowing clips, thats how you know its gonna be a good video.
Honestly I think it's the worst part.
Love it!
If you ever watch Low-Buck Garage, similar experience.
@@Lawdog652it’s okay to be wrong 😊
This episode is amazing.
Started off with bullet holes in the trunk. Then adding “drain holes” to the floor. And the. Bashing the heater core to smithereens because… Ford!!!
I just recently finished doing a head job on my 1969 Mercury Marauder which has almost exactly the same engine layout and heater core/blower box setup and I ran into the exact same problem and 90% of the battle was just trying to get access and room to do the work.
I could smell through the phone when the "cure all mix" covered you 😂
Those are fantastic engines. Had a 79 bronco with a 351M, took it out and put in one of those 460 DOVE C ENGINES and oh yeah. BAD ASS.
Those damn kids and their a-10s 😂😂😂😂
Glad they are on our side... Its not a good day otherwis
Brrrrrrppppppt. Thank you. From 10th mountain hooahh
I bet they could really punch a hole in a lincoln mark three.
@@jaggederest it would make a fantastic recruiting video👌
Videos like this are good reminders that sometimes it all just goes wrong. I had the same failure in an old VW engine I had revived. I was about to test drive it after doing a ton of work to it and the head popped off of one of the exhaust valves and stopped the whole show.
A 1:40 into the video....."I am going to dispose of it in an environmentally friendly fashion that you will not see." I fell out of the chair laughing and in my mind when you said that i was thinking BURN PILE.
Always appreciate videos where you show your screw-ups because we all make them can't be right every time
Ah perfect timing, i needed a new fix (cause i‘m addicted to this channel)
Well at least we know the wipes work. Early 70s Lincoln’s must be in the air. I’m working on a 73 4 door Continental right now with the DOVE motor.
One more comment here. I love Jes input and a touch.She adds to it, but also, the hole punch was the best.
That was quality 😂
You really don’t have great luck with those 460s, a 4:29 would be neat, but I think your idea of a 400 Pontiac going in your Torino would make amazing content! It would make both the Ford and GM guys cringe but I bet there’s a lot of of us out there that would love it. Lol
I was laughing the majority of watching this video. Not getting the plague, mental health and restoring a Mark III, every bit of the humor was very hilarious. Probably one of the best made videos to date.
That really sucks with the 460 DOve motor blowing up. Hindsight being 20/20, it probably would've been better to remove the engine and rebuilt it. But it was most likely hecked before in 1985. Possibly another block out there. If you did a video on the heads, I'd watch that.
My dad worked for Ford in the 70's, he talked about the Sticking Valves in Ford motors. Must have been one of those big blocks.
The best penetrant I've ever seen is mint oil and diesel. I first ran across it at the railroad museum I volunteer at, one of the guys got some mint oil from the farm where he works. I was blown away at just how effective the stuff is, it eats through anything! You can buy the mint oil online in big containers, and it's not too horribly priced. Another great video Dalton! I about died laughing when you busted out the 'hole punch'! 🤣 Keep up the great work brother, you are not only entertaining (and educational), but you are inspiring a lot of people to get out there and wrench on old iron. Thank you brother! 🤘
Mint oil? As in Peppermint?
@@achimhaun2726 Yessir. Peppermint or Spearmint oil. The stuff we use in the locomotive shop is spearmint.
The easiest way to start the car without keys is a dent puller screw it in and the cylinder will pop out
It was scary listening to the way it was running and sounded ! Always love the content! Look forward to it every week ! I think you should save that motor ! Do a special on it !
I love it when future Dalton shows up with wise hindsight. Awesome video
One of the most entertaining people on UA-cam. I absolutely love your content. Sorry the engine didn't fair out.
Well, I just witnessed a land yacht (named the Widow Brown's Inn) receive a complete detoxification by the Michelin Man 😂, to complete engine failure (typical Ford swallowing a valve. I can say that, Because it's happened to me a gazillion times). All in the glory of a day in the life, of Polebarn Garage! Epic! You're right Dalton, there's a first time for everything, but at least it was a Ford, and not "A JAGG" that locked up on you!
I definitely love being a member of the low buck club, and I DEFINITELY WOULD RECOMMEND IT TO EVERYONE!!! Thanks again for another great video!!😎🇺🇲🇺🇲🇺🇲
Just noticed, after many many videos, that you wear an analog watch. Simplicity at its best :).
not sure if he got a new camera or not but i loaded up the video and went whooooaaa PBG is gettin fancy!!!! super clear and detailed camera work!
Hay it was probably just metal fatigue mate don't beat yourself up love watching you do stuff
I love how you can see Dalton's shirt through the "Bio Hazzard Suit" lol.
27:44 the engine was cranking at the same time as the wipers 😂😂😂
It looks like someone cleaned out there office and just left it in the back of their trunk 😂
The entire office worth of paintings and books and the empty 18 pack really tell a story alright
@@mildly_miffed_man1414 and it was found in an impound sounds like someone got fired lol
Thank you for your honesty man. Life ain't all big blocks that fire up with just a twist of the distributor cap.
@15:10 The wipers coming on reminds me of "Monty Python and the Holy Grail" When the body collector is saying "Bring out your dead!" and a man is trying to bring out his elderly father, who says "IM NOT DEAD!" LOL. That car is trying to say IM NOT DEAD! LOOK AT ME! I HAVE WIPERS! LOL
It's deader than a dead parrot now, that's for sure.
@@mrb.5610It is an *EX-CAR!*
So sorry guys. I would have watch you pull it and make a series on 460 rebuild!
I don't know why, but those wipers had me laughing hysterically every time he tried to start the car🤣🤣🤣
Awesome content
Tuff break
Don’t give up on the 460 that car deserves it
9:06 The good old semi auto hole puncher 😂
Wow Dalton...people want to witness a 470 rebuild to make mega horsepower! 😊😊
Nice…just what I needed on a lazy Sunday!
Good thing Kevin has another 460 bottom end for you
Some people leave cookies for Santa... We leave copper for crackheads... I'm ashamed to say I LAUGHED RIGHT OUT LOUD for that one!
LMAO 😆 Dalton, IDK if JD told you or not but when that big turd started for the first time, it disappeared into a cloud of smoke.💨
Absolutely love these 70s lincolns but when those frames go there's pretty much nothing you can do and theyre scrap lol
The interior/trim bits and bobs are pretty valuable though (because nobody bothered to part them out because nobody bothered restoring them)
The wipers are killing me!!
Love the PPE. Don't get the plague again! lol
We love JD and Jess they need to be in every video ❤❤
Love this early access!
Least I can do
@@PoleBarnGarageI still see good parts on it
Wow! The rare 407 V7!
That whisper motor is the real hero
The D460 heads are what’s important. All you need is a regular 460 block to build with those heads. You’re in good shape still.
Love the quote from “Escape from NY”.
That old engine was begging for mercy from the start. But just like the lion tamers of old you beat that thing into waking up and putting on a show to the death. When it sounds like a bucket with a brick in it while it's running, that's never a good sign. As always, you never disappoint.
I dont blame him. he was just too thrilled to get it working you just forget the obvious. I still think the valve fell, and not that it has stuck
I'm drooling over the Torino. That series is going to be epic!
Dalton, I and others in the comments agree. Especially when you care about making something even kind of nice. It's okay to just do the "less interesting" video of pulling and rebuilding the engine.
Glad to see you avoiding plague and caring the smidge more about safety.
As much as we like content, heartbreak and/or death would be so much sadder than a slightly less interesting video.
14:28 😂 "That hole has great compression..." lmao...
Those heads are the good part anyway. Rebuild the heads and buy a later model 460 off market place and throw a set of flat tops, a new cam, a Weiand stealth intake and those heads, then slap it into your Torino.
Now that you have the D0VE heads I'd take 1 of the other 2 smog 460s and with some better pistons camshaft have a great engine or the Cadillac bronco creation Kevin owns has a domed piston 460 in it
What I love about this channel is it's realness. I always say that I get lucky so many times that I'm due for a pooper. They happen. Real life things.
I'll be a safety Karen: my dad was a painter for decades and couldn't count the number of painters he knew who died of pancreatic cancer because they did stuff like grinding (probably lead) paint, and inhaling other toxic chemicals for years.
I get how d*mn annoying it is to have people chasing you around cutting into your time with PPE. I'm technically the Safety Officer for our shop. Two days after that task was added to my management responsibilities I had a trailer fall on my foot thanks to an improperly secured folding jack. I wasn't wearing steel toe boots, instead it was Nikes, and I was now looking down at one crushed toe and another hanging by strand of skin. I see a lot of it as a necessary inconvenience now. I'm glad to see Dalton, who I respect and enjoy watching, looking out for himself👍🏼
@@rubinthomas8586 We all love to see Dalton not be completely cavalier towards his life. He's a smart guy, a good dad and a capable mechanic. The world needs more Daltons, not less.
That sounds terrible about your foot, I hope it was salvageable?
@@samragsdale2301 yep, just lost the middle toe, and the one on the right of it (this is my left foot) looks like a smashed grape, which is just funny. I call them Nubbin and Grape. I actually hobbled into work the next day. The look on my bosses face (he's also a friend) was priceless 🤣 👌 Thanks for asking👍
I do it now. But I began in a different time. I've done my time being a lab rat. No, I will not complain, why would I? I'm sure the 1,000,000 🚬 will get me first. 💥 KIDS! DO AS I SAY, NOT AS I DO. OR MY FOOT GETS BROKE OFF IN YOUR 🫏 .
@@COUNTSLURPULA your health really isn’t worth sacrificing for almost anything.
"I'll be as violent as required" PURE GOLD!!