✅ K24 Honda FIT gets transmission FIX‼️

Поділитися
Вставка
  • Опубліковано 15 гру 2023
  • In this Video the K swapped Fit transmission gets overhauled 1 too many times. All in an effort to make the car more daily drivable.
    Merch - Hondastreetgarage.com
    instagram @markmhsg
    Patreon.com/hondastreetgarage
  • Авто та транспорт

КОМЕНТАРІ • 50

  • @HondaStreetGarage
    @HondaStreetGarage  7 місяців тому +9

    Had to re-upload the video due to copyright audio.

    • @garyleonard7875
      @garyleonard7875 7 місяців тому

      Hey Mark, are you interested in doing some bolt on parts on a fk8

  • @got2bgotti10
    @got2bgotti10 7 місяців тому +15

    in HSG we trust 🙏

  • @jimhiscott2918
    @jimhiscott2918 7 місяців тому +5

    Well that was a bit of work however she's repaired😊. I learned a good bit as well. Nice job as always by Mark. Now go and enjoy them drives my good man. You have defiantly earned them.

  • @garyleonard7875
    @garyleonard7875 7 місяців тому +3

    From someone that’s not a mechanic , impressive work. I enjoyed the video

  • @Zosh
    @Zosh 7 місяців тому +3

    IN MARK WE TRUSSSSSSS

  • @macanoon
    @macanoon 7 місяців тому +1

    I really would’ve done the input shaft seal when you popped the bearing out…I admire your persistence. Nothing chaps my ass like putting some big together only to have to take it out again it can be really defeating

  • @BBoyDrkNova
    @BBoyDrkNova 6 місяців тому

    Glad you’re back and posting again brother ✊🏻

  • @hondaland_
    @hondaland_ 7 місяців тому +2

    Excited 😁 15 seconds in. Trans god mark is back with another one.

  • @c2specmotoring
    @c2specmotoring 7 місяців тому +1

    Good stuff Mark!!
    Always inspect your transmissions and check clearances if possible.
    I’m going to try that Tall Pines stuff, been using the Torco fluid for a bit.

  • @kriswest4808
    @kriswest4808 7 місяців тому +2

    Glad to see you back at it Brother! Keep your head up and I hope you have a Merry Christmas / New year as well!

  • @vinwilson5521
    @vinwilson5521 7 місяців тому +1

    Excellent video. I had a similar problem. I actually had to check my clearances and change my shim.

  • @Maker_of_manners
    @Maker_of_manners 7 місяців тому +2

    You can check output shaft endplay with a dial indicator to confirm that your within oem specifications.
    You might want to suspect the lsd. Throw a non lsd diff in the case to test it.

  • @Timbuckley01
    @Timbuckley01 6 місяців тому

    Great video, love the car. Sounds like a beast!

  • @janvos4375
    @janvos4375 7 місяців тому +1

    Nice work mark. Great details. ✌🏻🇳🇱

  • @OutOfOrderMai
    @OutOfOrderMai 7 місяців тому +1

    Great work!

  • @saityavuz76
    @saityavuz76 7 місяців тому +1

    Great work

  • @LarrySoliman
    @LarrySoliman 5 місяців тому

    so much trust on that wobbly rolling detail cart!

  • @victorwilks88
    @victorwilks88 7 місяців тому +1

    Great content buddy !!😮

  • @HarryPNess-lu1lf
    @HarryPNess-lu1lf 7 місяців тому +1

    great video big guy!

  • @hondaland_
    @hondaland_ 7 місяців тому +1

    I'm going to try hydrotex. After you let us know. Synchro message is already really buttery smooth and you're right about Honda fluid. The new stuff is nothing like it was whenever you bought the stuff for a d-series training that stuff was actually really good maybe even close to synchromesh but once the bottle went green it made it to where you couldn't be mean and you would feel the little tooth of the gear through the shifter knob and it made you want to f****** gag

  • @AlwaysApproved
    @AlwaysApproved 7 місяців тому +1

    love the vids

  • @bobabreath5097
    @bobabreath5097 6 місяців тому

    You obviously know your stuff. How long did you work for Honda? Great job!!

  • @estewar03
    @estewar03 7 місяців тому

    Glad you were able to get it all sorted out. You said you went with a lightweight flywheel this time, I thought in the install videos you said the "newer engines don't like them & cause CEL with misfire codes"? This is exactly what happened to my GE Fit when I put the lightweight flywheel on, I'm actually swapping back to stock tomorrow.
    Are you using a Tuner or something to deactivate the sensors that cause the problems?

  • @6ixdub
    @6ixdub 7 місяців тому +3

    Dammit boy

  • @jesusocasio4947
    @jesusocasio4947 7 місяців тому +2

    That’s what we call a problem 😂😂😂

  • @got2bgotti10
    @got2bgotti10 7 місяців тому +2

    damiiiiii boiiiii!!!!

  • @sajsed2
    @sajsed2 5 місяців тому

    Hello love your UA-cam content
    I have a 95 integra gsr but I’m unable to find a good quality brake master cylinder
    Would you be able to recommend a brand that you have used that works a good as the oem

  • @hondaland_
    @hondaland_ 7 місяців тому +1

    I had a guy bring me a car with a k series tsx jdm in a 06. His previous guy used a whole tube of honda bond on the timing cover, oil pan, and so on😂. It was a mess

  • @tommylyeah
    @tommylyeah 7 місяців тому +2

    🌲TPR🌲

  • @JohnDoe-mm6xg
    @JohnDoe-mm6xg 6 місяців тому

    You should use an anaerobic sealer to put it back together

  • @BuildsByThomas
    @BuildsByThomas 7 місяців тому +1

    My kswap civic has that exact same sound!!! On decel

  • @thatgreenguy2717
    @thatgreenguy2717 7 місяців тому +1

    just curios did you change the inner race on the counter shaft?

  • @jrock162000
    @jrock162000 4 місяці тому

    Hey Mark! Are you still going to do a separate A/C video?? Did you get yours working properly?

  • @Statiic_Wagovan
    @Statiic_Wagovan 7 місяців тому +1

    Should be guccitators!! 🤣 i like that

  • @Ooooozer321
    @Ooooozer321 3 місяці тому

    I wish this dude was my neighbor……

  • @henryreyes8947
    @henryreyes8947 6 місяців тому

    My brother just got a 2000 ex and for some reasons in 1st gear taking off we can feel a vibration while letting the clutch out we are not sure what the issue is tho we thought it was the clutch but it’s still doing it

  • @user-fc2dr9jv8s
    @user-fc2dr9jv8s 4 місяці тому

    How did u solve the issue with misfire codes using a lightened flywheel?

  • @tonytube1298
    @tonytube1298 7 місяців тому +1

    Whats up Mark! Ive been wondering if these Kseries gearbox are "better/stronger" than Bseries.. whats your opinion?? Thanks

    • @HondaStreetGarage
      @HondaStreetGarage  7 місяців тому +2

      Depends on a lot of things

    • @Maker_of_manners
      @Maker_of_manners 7 місяців тому +1

      Both transmissions have been great on track. There are aftermarket billet case options and internal dog bones that replace a gear at the top of the stack for even more strength.
      Poorly skilled drivers wreck them. Imo either one is a great transmission.

  • @DjSb6
    @DjSb6 7 місяців тому

    Will you be hitting the dyno soon?

  • @KevinFlores-zm7ds
    @KevinFlores-zm7ds 6 місяців тому

    Interested in buying the Fit. Price?

  • @raulmeza3149
    @raulmeza3149 7 місяців тому +2

    Were u been?

  • @billharvey9959
    @billharvey9959 7 місяців тому +1

    Does that transmission have a lsd?