How to Finish Plywood Cabinets: Inside & Out | Sealing Plywood / Edge Banding / Painting Plywood
Вставка
- Опубліковано 4 чер 2024
- In this woodworking video I’ll show you how to finish plywood cabinets inside and out. I’ll show you how to finish the inside of cabinet drawers, including all about sealing plywood and how to make “prefinished plywood”, as well as edge banding plywood edges. I’ll also discuss painting plywood and show you how prep plywood edges for painting to get a smooth paint finish.
Thank you to DAP Canada for sponsoring this video! Check out their woodworking product lineup here: bit.ly/DAPwoodworking
►Sign up for my newsletter: project updates, plans, woodworking book of the month and more!
eepurl.com/gVbt21
►SUPPORT ME ON PATREON
bit.ly/3cVCFLj Stickers, discount on plans & more
►Related Videos
Cabinet Making: • DIY Drawer Cabinet | D...
Desk Top Build: • How to Build a Desk To...
►GET THE CABINET PLANS
bit.ly/drawercabinetplans
►SUBSCRIBE TO MY CHANNEL
ua-cam.com/users/diymontreal...
►MATERIALS USED (affiliate links):
· DAP Premium wood filler bit.ly/DAPpremiumwoodfiller
· Edge banding amzn.to/3bD1JWO
· Shellac amzn.to/3qTdmPM
· Polycrylic amzn.to/3aO6AoQ
· Wood Primer bit.ly/BEHRprimer
· Cabinet Paint bit.ly/BEHRcabinetenamel
►TOOLS USED (affiliate links):
· Painter’s pyramids amzn.to/3aNnBQe
· Foam roller & tray kit amzn.to/3pObJBx
· Woven Roller amzn.to/3dHjFSK
· Mini sanding block amzn.to/37K2axm
· Sand paper (220 & 320) amzn.to/3urrGRL
· Parallel clamps amzn.to/3knuk6u
· Blue tape amzn.to/3qM0BGN
· Putty knife amzn.to/3dFcOtf
· Edgeband trimmer amzn.to/3sjdtV2
· Edge band roller amzn.to/3pR1oVx
· Clothes Iron amzn.to/2NXZ2XS
· Metal file amzn.to/3uEQSVc
· Foam brushes amzn.to/3ut4ZwG
· Paint brush amzn.to/37F2VIb
►ALL MY TOOLS & GEAR
www.diymontreal.com/my-tools-...
►PLANS & ONLINE STORE
www.diymontreal.com/shop/
►Follow me on SOCIAL MEDIA
· Instagram / diymontreal
· Pinterest www.pinterest.ca/diymontreal
· Facebook / diymtl
· Twitter / diymontreal
►MUSIC
Ask Rufus by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Artist: audionautix.com/
►Written article:
www.diymontreal.com/finishing...
►Chapters
0:00 Intro
1:33 Outside finish - Plywood painting
7:47 Inside finish - Plywood sealing & edge banding
11:00 Reveal - Навчання та стиль
I love how you go through the "I did this but it didn't work, so I did that" situation. I really appreciate that you show how you can do it wrong and how to fix it if you do. There are more of us very experienced woodworkers who do the same thing. Really like your videos so I subscribed.
Epistemological honesty!
Best advice I was given when painting our kitchen cabinets was from a particularly knowledgeable guy at a local Sherwin-Williams store. He suggested their Emerald line of paint along with their mohair rollers. The combination gave me an outstanding result. I think it’s as close to a spray finish as I could hope to achieve. I tried some mohair rollers from the local Home Depot and they did not perform as well, btw. Two years later the paint is holding up very well. Even around door and drawer pulls where fingers might contact the paint it’s fine, and washing away bits of kitchen spatter has not abraded the paint.
Great video, Marie! I love that you show both the successes and failures and explain your thought process the entire way through!
I have just finished painting my router table/cabinet build after watching this video and many more like it. I found that a good quality roller was good for putting the paint on, but left a very poor finish. However the tray and roller kit I bought had a short haired pad, and that did a fantastic job of smoothing the pain after I applied it with the roller.
That finish on that plywood with shellac and polyurethane looks amazing!
I love your videos. I am a newbie at woodworking and have followed some of your methods in some of my builds. I appreciate how detailed you are with your instructions and how much easier you have made my woodworking journey. ❤️
I really like this video because I’ve done almost the same steps to cover the plywood edges. I also use all purpose joint compound to cover the edges, prime and paint and I’m very satisfied with the results. I used chalk paint and paste-wax as the top finish on one of my projects and result was awesome. Polycrylic is also my favorite product for drawer interiors. Thanks for sharing this video!!
Great video! We use Benjamin Moore advance on cabinets and trim all time. I recently used it on a metal radiator cover and with 3 coats it was perfect. It levels out beautifully and dries hard as rock. No orange peel.
This video made a subscriber out of me. Thank you so much for going through this in detail. I am a newbie and am getting ready to make my first dresser. I am confident you have just saved me tons of frustration. You are a great teacher.
Love that you showed what didn't work! Always so helpful for learning - thank you!
Thank you for posting this video!! So many great tips and you filled in the missing pieces for me to finish my own project.
Thanks for the instruction. I have just built two drawer cabinets with 4 drawers each, which will support a 1" plywood top to form a modulat desk/workbench for my daughter, who makes jewellery. I looked up "Finishing drawers - and there you were! Now, I'm going out for wood filler and shellac. Good advice! Many thanks.
I’ve found parchment paper between the iron and edge band works great. Thanks for sharing, great work!
Your presentation is excellent. I been doing drawers for years but your system is now my new way. Thanks again!
Thank you for the tips. I just finished making my first drawer base and will definitely use your instructions for the wood filler. I plan on spraying my wood because I didn't want any brush lines or roller markings. I don't care the for orange peel look.
That blue is super nice and love the contrast with the gold pulls... when you added those my 1st thought was ewe so 90's but with the blue it ties in beautifully. I never used Dap filler ive always just used titebond II on plywood edges apply like a glue up let air dry, sand paint no bleed through
You are a very good teacher….. Love your channel. As a 53 yrs old newbie , your attention to the details to teach us is really amazing. Thank you !
I have been using Sherwin Williams paints and stains professionally for over forty years, you can not go wrong with their permium line of products. Great channel, and keep up the great work.
Great video. I have been building cabinets for a look time and one of best cabinet paint I use is Benjamin Moore Advance. Spray or brush the end results have always been fantastic and the customers are always pleased.
Marie, I recently painted a plywood cabinet for my drill press. I used interior latex with a flac roller and i got a smooth finish. You may have some issues with the formulation of paint that you used but in my limited experience the flac roller produced a smooth finish. I got my roller at Lowes. Thank you for this video and best regards.
I took Cabinetmaking in college (many years ago now) and we were taught to use a sharp chisel and files for trimming up edge banding. A single cut file going with the grain along the lengths, and then putting the piece upside down and using the chisel and mallet to cleaning cut the ends square. Then break edges afterwards during sanding
Yep. Block plane blade works well too. Blade sharpness is key and likely the cause of the tearing after a few uses of that trimmer.
Excellent info, thanks for passing it along! I must admit I'm not too handy with a chisel (mostly because I haven't practiced my sharpening much, hence have dull chisels). I look forward to trying these techniques next time, thanks!
I by no means am a strong maker. with that said I watch and listen to many many makers around the world. I saw from a fellow content maker, bourbonmoth. He had the same problem with painting his cabinets. He used a foam roller and it left air bubbles. So he follows it up with a brush stoke, very very light; just to break the bubbles. I have tried this a few times and it works well to remove this stubborn pot marks or orange peel effect. Love your content. Thank you so much
Yeah I saw his video too and went Doh! Wish he had posted that a few weeks earlier... Great tips in the video.
This is a great video! I've been trying to figure out a good way to finish drawers for my kitchen. I'll be using this method now.
Love your channel!
I'm from Ontario and love that you are Canadian
I always enjoy your videos and find them quite informative. I have the attention span of a gnat but I never find myself fast forwarding. Thanks for sharing!!
Awesome thanks! It's great to hear that. Definitely don't want to be boring!
Always an OUTSTANDING job you do. 😊
Amazing video! Thank you for being humble to share your missteps. I feel like you saved me from making the same mistakes with your details. I'm officially a subscriber!
Beautiful, well explained. Love your videos. On my side, I used a microfiber ultra fine mini roller and rust oleum above the water marine paint on my home made teardrop camper… most people think that it was sprayed.
One of the problems of micro bubble is painting when temperature is below about 60degrees. May not be due to the paint itself. Also, alkyd paints are good for shelves as it doesn’t cause the stickiness on the surface, especially bookshelves. Great videos. Enjoyed them
Great video and thank you so much for the step-by-step regarding finishing the inside of your drawers and I'm presuming the process would be the same for the inside of the cabinet.
I had this same issue with the bubbles in the paint! It's because even though the layer you painted over is dry, it still holds a little bit of moisture. I used a heater and brought the room temperature up to 24 degrees celsius. I let the wood dry properly for a few hours. Then painted the new coat, and there were no bubbles in the paint!! Was so happy.
Great looking cabinet. Spray painting is always the best. Short pile roller and laying off with a brush good too but needs very good brush with tapered synthetic filaments. I once painted a cabinet 6 times... After a few weeks with the cabinet in use, I stopped caring it wasn't perfect.
I've gotten excellent results with general finishes milk paint & a good brush on my cabinets. Leveled out smoothly with no brush marks.
FWIW, there is a boat finishing process (I think it is called roll & tip) where you roll on the paint (in sections) the take a "dry" paintbrush and very lightly go over the rolled on paint to get rid of the texture. I discovered this AFTER I used a roller to paint an exterior door. It actually works pretty well if you "tip" the paint after each small section while the paint is still quite wet. Used this method on a different door and was surprised at how good it looked afterward. The brush doesn't have to be completely dry, just don't put it in your paint.
Wow! Thank you for your help tip!
Thank you so much, this was super helpful with a project I have ongoing right now. Cheers!
I ran into the same problem you did with the paint being rough and looking like orange peel. I would recommend spraying with an hvlp, I know you mentioned you didn’t like doing it indoors but the trade off is so worth it. Just make sure you take the time to cover all your tools and cabinets that you don’t want overspray on. Overall great video, I like your thought process And explanation!
The best video explaining everything! Wow! Thank you so much.
Despite your dissatisfaction with the orange-peel, I still think it came out great and that you did a really nice job. Seeing things that don't turn out the way one hopes is just as valuable as seeing what works. Thanks for the great video!
After you roll the paint and it is still wet, use a paint brush to level out the paint. Just lightly brush it in one direction. I do this on interior doors and trim all the time.
Ok interesting, but won't the brush marks show?
@@DIYMontreal I was using a thicker latex and it did not show any brush marks.
@@WoodnMetalShoppe OK I see. I'll give it a try on my second cabinet and see.
@@DIYMontreal no this technique is often used in painting boats and they call it tipping off there. Try to find a brush with badger hair or what they call a laying off brush in paint shops, roll in 1 direction then use the brush the opposite direction to tip off the paint :)
@@DIYMontreal technology in the paint supposed to level itself out.
I have used lots of different brands of paint. Sherwin Williams has never let me down👍🏻💥👊🏼
Will have to search for a local supplier!
I think you will be happy with it I have used just about all the box store paints. I just go to a sherwinwilliams store. But I think Lowe’s started carrying it. But not sure.
this is legit one of the best reviews on finishing for a home gamer with minimal tools
Thank you for your honesty in this video. I often watch these videos and then try to make it in the same way only to find so many mistakes. I appreciate you finding errors and fixing them in the moment. That makes me feel better about my own mistakes! This is my first video with you but I started following you based on your honesty!
Agreed. Nice to see the imperfections we all experience at some point. Excellent tips btw.
Fantastic ! Thank you . Greatly appreciated for showing this video
Nice job on the plywood cabinets Marie! Thanks for sharing the video with us!💖👌👍😎JP
This was a very interesting video for me, especially about using the foam brush with the varathane. The other comments on 'tipping off' were also very useful. Gratz. Glad you got the heater ;-)
@Hello John how are you doing?
i love that blue and gold... i think leaving some plywood exposed too would've added great contrast.
Update: As a few viewers have suggested (thank you!), "laying off" or "tipping off" the paint after applying with a roller would likely have been the solution to the bubbles. Essentially the idea is to run a paint brush very gently across the surface immediately after you have applied the paint with a roller. This gives it a super smooth finish and helps it level out.
I just used this same paint on some built-ins I made. I was recommended to use a microfibre roller, and I got a great finish with two coats, also sanding to 320 in between. And yes, tipping off the paint can help. I didn't use a brush at all, but rather used my roller going in one direction only, and a very light touch (only the weight of the roller itself) to tip off the paint at the end. Hope this helps!
@@andrewjorgensen5568 what Kind of Paint did you use? :)
@@djVania08 The same paint.
Hi Marie. Thanks for your video! I just completed a similar project (a floating desk) but a month ago, I painted my kitchen cabinets. So, ideally, (I think, never have tried but hear great things about it) you spray paint your cabinet. But like you said, it was cold outside and even spraying outside in the summer could land dust/debris/dirt/bird poop on your project. Spraying indoors would be great but you gotta seal off an area or have a spray paint tent/polywrap a portion of your garage/workshop to catch the off spray. When I painted my kitchen cabinets, I used a 10 mm microfibre paint roller and got the same bumpiness. Terrible. I hate it and need/want to refinish it/fix it. At least, you used a 6 mm roller so your bumps aren't as deep. I just completed my floating desk project and to avoid the bumpiness, I used a foam roller. I usually try to stay away from a foam roller cuz it slides around and I've just always used microfibre but the finish is way better than the microfibre. Very smooth and barely noticeable bumps. So, unless you can spray paint, use a foam roller for next time. Hope that helps!
Andrew says use microfiber roller. Robert says no to microfiber roller!? Who is right?
Perfect perfect video!! Exactly what I needed. Thanks so much
I know everyone is yapping in your ear ? I am a contractor/custom carpenter and spend a portion of my life sanding:). 1st off nice Sander :)
If you turn down your vacuum you will eliminate swirl marks, a few other things too!
Your a very good woodworker I sat thru two of your videos !
Super informative and great job done. Thank you very much for sharing this experience.
I bought a paint shelter (like a tent) that I can put up in my garage to spray paint my stuff now because of how disappointing lol the paints usually are. No overspray because of the tent, but make sure you have a good fume/particle respirator and goggles!
I bought one of those 1k-5k electric heaters for my 10x15ft detached garage gym and its been incredible. Mounted to the ceiling and when its below 0F here I can get that place above 80. And the little thermostat is basic but works well. Was only 140USD or something. Also I love the content you make!
That is awesome!
Thank you so much!
I have left over acrylic Behr matt for my wall. Sprayed it lightly in two coats over primer coat on MDF and it's come out so smooth. Only the MDF and primer coat was sanded to 220
They turned out great thanks for sharing
I use that exact same trim and cabinet paint and I've found the same problem with bubbles. One thing I've noticed is that they seem to happen when I've shaken the paint (or had it mixed at the store) instead of stirring it. I'm sure that the paint brush trick would help as well, but a slow, consistent stir instead of a vigorous shake should fix the majority of your issues. Cabinets came out looking great!
In the past I've had good luck spraying cabinets with airless sprayers but in more recent years I couldn't get a smooth finish. I've heard of additives for the paint that will allow it to flow a little bit and self level after being applied. We had professional cabinets installed in our kitchen and they were sprayed with oil-based paint which gives a much better finish and they seem to be very durable.
You should look into using a card scraper. It leaves a much smoother surface than sandpaper. And it is used to build up a beautiful finish. You apply one layer of varnish or paint, let it fully dry and then use the card scraper to flatten the surface. Then you add another layer, let it dry and scrape. And again etc. Any tiny holes will be filled with varnish or paint. The last layer you apply, you thin the varnish or paint a little. This will make it very easy to apply with a paintbrush. Because it has been thinned, the brush streaks will vanish and the surface will be as smooth as silk. Shellac needs about 8 layers when doing this. Paint depends on the type. My favourite varnish for cabinets, are Epifanes clear or mat finish. It just leaves such a beautiful result. And remember the card scraper has to be sharpened correctly. Else the result will not be good. There are plenty of videos, on UA-cam, which shows how to do it.
Nice tips, thanks for sharing. Never thought of using a card scraper for this application. I would definitely need more experience with it I'm sure before trying this.
@@DIYMontreal I second the card scraper. I have only done it a couple of times, but I find it a lot more satisfying over sanding, as long as the card is clean and sharp. I'm not sure how well it would work on plywood edges, but I enjoyed using it on board faces. Give it a try!
@@nefariousyawn Will do! I have a card scraper sitting in the package still.... It's about time I tried it out.
A lot of great thoughts Marie. Sorry about your Behr experience. I kept wondering if it still wasn't too cold in the shop? Really like the Blue you picked. I'm a big Behr fan, but I had never used that line of paint. Probably won't now either. Keep makin, and be well.
Hello Marie. great video. thank you. Diluting the paint will help eliminate the bubbles. not too much. i go for 80/20 paint thinner. try it on a scrap piece and you will notice much less bubbles. the last coat must be diluted to 40 or 50%. you might need to do 4 coats in total. that is how i always did it. test it.
really good video, informative and to the point and no waffle. Thanks Alan UK
Excellent advice and tips! thank you for this video.
You bet 👍
Great video, thank you! You could try hitting the surface with a hairdryer after you apply the coat. It’ll help bring the air bubbles to the surface and should give you a smoother finish. That said, I love the way it looks!
I’m definitely gonna try the 1 coat shellac & 1 coat poly thing. I’m usually a 3 coats poly kinda gal. And I usually hate myself a little for being that way, but it looks so good, so what can y’do?! 😜🤷♂️
Life-changing product!
Te quedo muy padre!
El color me encantó! Y las terminaciones muy bien detalladas.
Te felicito un excelente trabajo!
Me suscribo !
I use the Behr enamel all the time in the shop. It’s best sprayed for doors and drawer fronts but carcass and faces come out great when you lightly brush after using the roller. Just drag the tip lightly across the surface and it’s money.
Canadian AF, it’s nice to see other Canuks on UA-cam. 👍
great episode, thank you for sharing
Great tips. Thank you for making this.
Part of the issue may have been the temps. Even with the space heater I imagine it was still pretty cold. The colder the paint the thicker the paint, and less inclined it will be to self-level. Also, while more so for spraying/pouring, you might consider a paint conditioner like Floetrol which can significantly improve the finish as well.
It's odd because I found this paint so watery. But temp may be the issue indeed if it affect the self-leveling...
@@DIYMontreal Have you tested with a heat gun? I'm planning to paint some cabinets and just finished resurfacing a bath tub with epoxy. The heat gun helped get all the bubbles out of the epoxy after pouring it on the tub. Wondering if that might be useful when I start painting.
So I had already bought the same rollers and similar pain and initially I had the same experience however! As I rolled I pressed pretty hard and the air seemed to get replaced with paint as I rolled. After pressing the roller with paint a few times things really smoothed out a d I actually ended up really liking the foam roller. I painted a poplar toy box. I wish I could show it but idk how to internet. I used some fancy cabinet pain from the box store.
Great job and looks beautiful
Really Good job 💪🏻 i love this finish.
This was good timing, I've been doing a bunch of finishing work lately and learning to use my HVLP gun, although my go-to is a foam brush or roller. Thanks for recommending the acrylic alkyd enamel, I'm going to try it. I sprayed some Behr Premium Plus on a french door today, unfortunately the coats were too light to get the correct sheen, it still looks nice though, more like eggshell or satin than semi-gloss. 😁
Spray gun will likely yield a better result that's for sure. I guess I'll have to use more ne next time /:
good job! even if you didn't want to achieve this, I really like the orange peel finish 😅
Unless you try out the innovations, you cannot learn something new. And you are always working to teach innovations. And you always produce innovative studies and ideas. Thank you for sharing. See you. greetings.
I appreciate that!
Thank you so much.
Exactly what i was looking for
Great quality work there!
Great tips and insights! Will try the DAP grain filler and shellac.
Awesome, enjoy!
I experienced the exact same bubbling problem with this paint, and ended up with an subpar finish on my, incidentally, office cabinet! Wish you had made this video a couple of years earlier!
That sucks! Which I had know that myself... Might have chosen a different paint and sprayed. :(
I,ve used pyramid stands like these, i think called painters pyramid and grabbers, I like them for staining. I used them the opposite with point down to table, they had little rubber grip feet on the base and worked well to hold my product in place. I guess I used them wrong but it worked so good. Very Nice video. :)
Great video with tons of good advice as usual. You have such a great narrative voice: its very soothing and easy to listen to. I'm sure you would e a great audio beeok reader👍
Great video, love that you didn't edit out the learning curve. Got a new sub👍
sherwin williams emerald urethane is an excellent furniture and cabinet paint. Great video!
I just finished a cabinet with white Sherwin Williams Emerald cabinet and trim enamel. I used a very short nap non-foam roller. It is amazing stuff and gives you a fantastic finish. Almost like it was sprayed on. It is expensive at about $75 per gallon, but it will save you a lot of time.
Such Great info..Thanks!
Great video - I'm buying your plans for this build!
I am no professional, but I have been renting, maintaining and renovating houses most of my adult life and let me just say Behr was always junk and difficult to deal with. We have been a proud commercial account holder at Sherwin Williams for over a decade now and we absolutely love their paint. They give amazing prices on their paint commercial accounts and we literally have never been disappointed. I just finished an entire exterior of a 30x40 shop in a dark color and it looks like we pouring it on and it’s perfect. We used their top of the line Emerald series and I cannot explain how good it looks. Over the years I have used alot of brand, but SW is the best and most consistent. Also, the best finish / look we get on cabinets that outlast tenants is using an oil-based white gloss. The oil-based is incredible…hard to deal with, but incredible.
Looks pretty great, in BC at Sherwin Williams we can get emerald eurethane for trim. Works wonders for birch plywood. Needs good backfilling and sanding but is beautiful. Cute time is 28 days though.....
Lovely lovely absolutely wonderful.
Its very good paint I,ve used it to paint several kitchen cabinets including over stain you have to apply very thin coats and use cabinet rollers and it looks like its sprayed on and cold garage might ply a part also.
this is a fantastic video. thank you.
I have a flexible 4" putty knife and a 1 1/2" putty knife. I load up the 4" with enough to finish the task.
Also, using a tack cloth prior to applying finishes is helpful. It avoids adding moisture to the work piece.
Pretty awesome video! Thanks for sharing this
Glad you enjoyed it!
Such a beautiful colour 😀
I'm using that same paint on my kitchen cabinets. I dilute and then spray with my Earlex hvlp system and it lays down very nicely. My cabinets are plywood with pine face frames.
Diluted?! Wow, this stuff is already so liquid I can't even imagine. But good to know. I'll likely try spraying next time.
I'm still looking for the dryer or jar you are painting, but the filing cabinet came out great
thank you for the video! learned a lot good experience!
Lavoro stupendo! Bravissima
Un saluto dall'Italia 🤗
It isn’t the paint, it’s the painter. I have and I’m currently using Behr cabinet & trim paint for all my doors and trim in my house for max wear resistance. I put a little floetrol in the paint and brushed my trim. My crown molding looks like I sprayed it! The doors were sprayed outside and look perfect with a LVLP spray gun from harbor freight and a pancake compressor.
Blue looks good.
Bravo great job Marie.