As an amateur woodworker, I really appreciate this construction style. I made four base cabinets in the summer. Three of them I used dados and rabbits cut using my track saw. The last one was made the same way you have here with pocket holes and butt joints. Once they were tied together, there is zero difference in strength for practical use cases. If something is going to crush two pieces of plywood stacked 1.5” thick and supported by arches and buttresses, and tied into your wall studs…. you probably needed a steel frame anyway. I get it for stand alone pieces like drawers, a hutch, a dresser, etc. I don’t think we really need it for things being supported in part by the building itself. Recently I was adding pull out drawers to my professionally installed kitchen cabinets. Ya know how they made those? Butt joints and pocket hole screws. They’ve stood the test of time for a decade and the only things wearing out are the undermount drawer slides. Thanks for the guide.
This is the best cabinet builders guide I've seen. Some neat experience-driven tricks too, such as holding down your pencil at the line and then butt up the speed square against it. Or the tongue technique with the router is brilliant. Thank you for taking the time to make this.
I'm always impressed with your design and cabinet building skills, but this time I'm even more impressed with the way you woman handled that piece of 3/4" plywood into your shop. Wow, Supergirl. I have a set of cabinets to build this summer and have already saved this video to use as my guide. Thanks.
Thank you! If you leverage the plywood just right, it's not too bad to move around haha. I hope this video is helpful when you start your project! Happy building!
Same idea here. I did use her build drawer guide a couple years ago, did custom closet organizer, only ikea cabinets were not available, so I also built my own.
Thank you! It'll make more sense why I made it that way once it's installed in the laundry room. But an open shelf cabinet is a really great way to add some super simple storage anywhere you need.
Agree on the Sherwin-Williams Emerald. It is a great paint for cabinets. We used that to paint our existing cabinet boxes along with new doors and drawer fronts. We found that the 4” mohair rollers from SW gave a nice, smooth finish. That project was completed a couple of years ago and the paint has held up perfectly.
Thank you so much! I tried cutting the tongue and groove both on the table saw, but it was taking forever. Cutting it with the router was MUCH faster (and cleaner!).
Well done! I like that that you show a sketch of what you are going to build before you build it, hardly anyone else does! Most other's guide you along without any visualization of where you are going! Smart!
I love how you made these simply and they look amazing. Everyone else online wants to do all these dados and other complicated techniques. You made it look so easy and the end result is oerfext
OMG, first time seeing one of your videos. I’m now a subscriber and look forward to watching the rest of your videos. You were straightforward and kept it simple. Using affordable tools most of us have or should. Admitting mistakes and always reminding us of slightly different approaches as well. Great job and thank you for taking the time to guide and share.
I'm about to embark on building my kitchen. This video has been invaluable as everything is explained clearly and highlighted areas I hadn't thought of. Excellent.
That tutorial was clear and paced so well that I may be fooling myself into thinking I should try this in an upcoming reno. (Probably not though. But watching you do it - and the excellent graphics you used to explain your alternatives! - are super helpful regardless) Thank you!
Love how these cabinets turned out and can't wait to see them installed in your laundry room! So sorry you didn't like the color and ended up painting them twice as I know that is a job you don't care for! It's worth the effort to be happy with the final color though. You'll enjoy them for many years to come. Thanks for another great video with excellent instructions!!!
You explain really well, you go slow enough for others to follow and your end results are amazing! I'm really glad I've found your channel, you give me confidence to attempt these myself. Thank you for what you do! 🌟
Young lady you are truly a marvel. I so enjoyed watching you so carefully build those cabinets . I have done a lot of renovations on houses that I bough but never had the moxie to talk on cabinets. The dryer dower was an excellent idea. … I am now in my 90s it is so good to see you youngsters take on these skills , they add so much to your quality of life they also add financial stability because it is in your hands…. Good job . Enjoy your cabinets ❤😊😊😊
Shara, you're "spot on" for this household (and probably many others) as the weather seems to be breaking a bit and I've been thinking about increasing our storage space with some additional kitchen cabinets for at least this entire winter and maybe even longer. I love the modular style and look forward to using it soon. It's nice to watch a basic basic video about cabinet building and I for one appreciate this. Thanks to you and Bubby. Thanks for Sharing!
Thank you! So glad you enjoyed it :) and also glad to hear the weather is breaking a bit your way. It was a pretty nice week here and we finally got some sunshine. I have a feeling it'll be an early spring and I'm here for it! Bubs says thanks for watching haha! Have a great weekend and happy building!
I am always satisfied after watching your videos and as a result I have bought several plans from you. Once I start to replicate the builds I know I can always come back to the videos as a kind of tutorial to the plans I purchased. Thank you for the detail you put into the videos they always help. I hope more subscribers feel as I do. Thanks Shara
Thank you so much for your support of my small business! I truly hope you find the videos a helpful addition to the plans. It's mostly why I make them :) I appreciate you following along and I hope you have a wonderful weekend. Happy building!
I've watched a lot of cabinet building videos, and I have to say your series is some of the best. Very informative and more understandable details. Thanks
The cabinets looks great and love the paint color. It appeared darker in color in your shop but looks lighter in the laundry room. Can’t wait to see everything you do in the laundry room once it is complete!
Hi! Thank you! Yes the original (first) color I painted them was darker. I repainted them a lighter color because I wasn’t loving the first one. They’re still in my shop in the video :) I’ll share them in the laundry room soon!
Shara, another detailed build! Your instructions get better with each build you do. It seems that there is an endless amount of details to learn and practice. You’re always one step ahead of me! I need to build a new set of cabinets for my getaway mountain house. Thanks for these ideas and I’ll definitely use a set of your plans when I’m ready to start. Thanks again and I’m glad Bubs was there early to supervise your introduction! lol…. Take care and keep on building?
Hi! So happy you enjoyed the video! Bubs is always around when I'm trying to film a "talk to camera" part 😂 He kept meowing in the background and I had to keep starting over haha! He makes me laugh. I hope you have a wonderful weekend and happy building! PS I'm so jealous you have a getaway mountain house! An escape to the mountains is always nice every now and then!
Have you ever done any kind of FAQ video? I’d love to know your background and how you got into building! You and Tamar (3x3 Custom) are super inspiring to me as a woman getting into woodworking 🥰
10:35 this is probably the BEST setup I’ve seen to make shaker doors!! I’ll be tackling this project soon and I just wanted to say thank you for the tip! All the other videos I’ve watched have you running them through a table saw on multiple passes.
Thank you! I appreciate you watching! I was trying to think of some unique ideas for the laundry room. I figured it would be nice to "hide" the drying rack when not in use!
Thank you! I appreciate you watching! I was trying to think of some unique ideas for the laundry room. I figured it would be nice to "hide" the drying rack when not in use!
I'm just starting to build a Kitchen Island. I have planned to use mainly drawers and also to do a face frame . I will be making the drawer fonts as slab and no pulls or handels. I will give the top of the drawers a slight angle for a finger pull. I love the way you build. There is always some little tip
Hi! I have a list of my top five tools I recommend for beginners here: www.woodshopdiaries.com/5-tools-need-get-started-woodworking-less-500/ And a list of must have tools for cabinet building here: www.woodshopdiaries.com/must-have-tools-for-cabinet-furniture-making/
Wow...this was so inspiring and empowering! Thank you for taking the time to make this video and for showing how we gals can manhandle wood with the best of 'em. Your cabinets came out fantastic!!
Thank you! I usually prefer frameless cabinets. But I thought I'd try something different this time and do face frames. I does save a lot of time not having to edge band so much 😂 So I may do it more often now haha!
Ok, the drying rack as a drawer is a clever idea. Neat. Not sure it's required for everyone, but what a great idea when your space demands certain efficiencies.
This is the best in depth video I have seen about this topic ! Straight to the point , explain the important details us newbies need to know , while keeping it interesting! Thank you 🙏 😊 I’m a veteran who is thinking about leaving my electrical trade to do something like crafting things made of wood .
Well done Shara. I love the choice you made for the cabinet paint, because I’m on to day two building cabinets with drawers for my new wood shop. I was considering painting them and yours turned out so well I think I will. 🌻
Another great looking project and very much useful. You always make things look simple, but I'm sure it's not to beginners. Love the awesome cabinets and color. I always use Sherman Williams paint also. Always look forward to your Saturday vides. Have a great weekend Shara. Steve
Good morning Shara! I absolutely could watch your videos for hours on end! 💯 Please don't think I'm crazy 🤪 I truly love wood working and specifically, DIY wood working to renovate my home. I am stumped and would genuinely love some advise. Here's my situation: I'm taking an existing bathroom vanity that has 2 cabinet door sections (1 is under the plumbing and the 2nd half is on the other side). I've taken the non-plumbed side and installed a wall between the 2 halves so that I can build drawers. Seemed pretty simple to me & logical, tbh. It's a small bathroom (1970's home) and we need the drawer space. I measured the space to determine how many drawers I installed. I built 3 drawers (yes, I watched your drawer installation video😉) and made my drawer boxes. The trouble I've run in to is, even though I triple measure the length and width, I don't think I'm square and when I go to slide the drawer boxes, they fall off the slider. Can you give me some trouble-shooting questions/suggestions to help? As is stands, I'm frustrated and ready to throw in the towel! 🤯💔 Working on an existing vanity to build/install drawers is a pain in the butt! I've recently had the idea of building an insert that I can build the drawer slides to but that seems redundant. How would you tackle this? Ps: I want to build a wall of base depth cabinet & drawers for my kitchen, that surround my fridge and that is a MUCH bigger project but first, I have to get this issue resolved. I REFUSE DEFEAT! #hardheaded #determinedwoman 🤓💪😂🤣👍
I love this layout. This came along at the right time. My sister-in-law want me to build her a kitchen island. So! this will work out beautifully. The only difference I'll have to do the back different because it'll be used as a eat in bar. It'll be 24"DX32"HX 48"L. Thanks!
I have never seen this method of routing the tongue portion and I love it! I've been going through the hassle of mounting my router in a table, but I hate storing the table since I literally only use it for this purpose. I'm going to try your method and use that storage space for something else haha.
Love this! I too do not use wood glue. Mainly b/c if I mess up and need to adjust, I can b/c it's just a matter of unscrewing. With the wood glue, once it dries, it's hard to remove any pieces without damaging the wood. Therefore, costing more...
Haha! The weather was finally nice out while I was working on these, so he was out and about most of the build and didn't hang out. But of course, as soon as I film a "talk to camera" piece, he made his way in the frame ha! He's definitely the one in charge around here.
This was an awesome cabinet video. I really liked your style of explaining why you made the choices you did and some other options that could be used. Subscribed!
Epic build as always Shara! I'm never much of a fan of painting cabinets or wood in general. But I would be lying if I said that finished color didn't speak to me.
Basic base cabinets! (say that three times fast...) I'm looking at shaker-style cabinets in my den as I type - I think that style is "elegantly simple." Great job in the intro explaining the dimensions and options. I like your methods, and kudos for discussing options for how the approach you demonstrate can be adapted. Lookit Shara busting out the router for some frame-and-panel work! Very nicely done. Personally, I really like the second color and hopefully it will grow on you once they are installed. P.S. I spy Bubs 1:20 . P.P.S. not a hint of anything clicky or baity...😉
Thank you! I hope the extra info was helpful-there are obviously lots of ways to build the exact same thing 😊 Also, the router is slowly growing on me. I convinced my husband to set up my router table last week because I HATE setting up new tools and I’ve had it for well over a year half assembled 🙈 so maybe next time I can use that instead of the handheld ha! The weather has been warmer and sunny so the pets stayed out and about most of this build-of course until I needed to talk to camera and here comes Bubs 🤣 I hope you have a wonderful weekend and I appreciate you watching!
Seriously? Again? I just finished the Pantry and my wife and I were talking about the laundry room. We were deciding on buying some cabinets or just building some and then you do this. Guess I'm heading over to the site to buy the plans. I'd be upset if it wasn't for the fact EVERYTHING I've built from your plans turned out perfect. Seriously though thank you for all the woodworking you've done and shared. This, once again, saves me the time of drawing up my own plans which normally has something missing I forgot to add into the dimensional cuts.
You just finished your pantry and I'm about to start mine! I just finished my laundry room and you're about to start yours! Great minds must think alike ;) haha. I don't have printable plans for these (although, I do plan to make a guide to building them in several standard sizes!), but hopefully the instructions on the website are helpful. I did include a cut diagram--and they're free :) I truly appreciate your kind words and love to hear you find the plans from the past helpful for your builds. Thank YOU for watching and following along!
I saw the wedding band, but do you have a sister ... that of course, has your knowledge? LOL!! All kidding aside, awesome video. Love how you ran through the entire process and incorporated the 3D modeling.
Love your video! Right to the point on everything I wanted to know without any extra unecessary commentary. I will definitely refer to your vidoes again! I wish more people were as aware as you are about what makes a great DIY video!
As an amateur woodworker, I really appreciate this construction style. I made four base cabinets in the summer. Three of them I used dados and rabbits cut using my track saw. The last one was made the same way you have here with pocket holes and butt joints.
Once they were tied together, there is zero difference in strength for practical use cases. If something is going to crush two pieces of plywood stacked 1.5” thick and supported by arches and buttresses, and tied into your wall studs…. you probably needed a steel frame anyway. I get it for stand alone pieces like drawers, a hutch, a dresser, etc. I don’t think we really need it for things being supported in part by the building itself.
Recently I was adding pull out drawers to my professionally installed kitchen cabinets. Ya know how they made those? Butt joints and pocket hole screws. They’ve stood the test of time for a decade and the only things wearing out are the undermount drawer slides.
Thanks for the guide.
This is the best cabinet builders guide I've seen. Some neat experience-driven tricks too, such as holding down your pencil at the line and then butt up the speed square against it. Or the tongue technique with the router is brilliant. Thank you for taking the time to make this.
I'm always impressed with your design and cabinet building skills, but this time I'm even more impressed with the way you woman handled that piece of 3/4" plywood into your shop. Wow, Supergirl. I have a set of cabinets to build this summer and have already saved this video to use as my guide. Thanks.
Yes, it weighs too much for me!
Thank you! If you leverage the plywood just right, it's not too bad to move around haha.
I hope this video is helpful when you start your project! Happy building!
Same idea here. I did use her build drawer guide a couple years ago, did custom closet organizer, only ikea cabinets were not available, so I also built my own.
As a woman, I concur, great job. Yes, leverage helps, and I tend to do the same sort of thing, as my husband is a disabled vet.
So satisfying to see how perfect the drawer boxes fit into the cabinet!
Thank you for this! In the process of a big remodel on a very tight budget! Exactly what needed to come to my recommended page today! Thanks again!
I especially like that open shelf cabinet on the left side! Seems like it could be very convenient for certain things.
Thank you! It'll make more sense why I made it that way once it's installed in the laundry room. But an open shelf cabinet is a really great way to add some super simple storage anywhere you need.
You make it look so easy. Nice job! Great idea with the drying rack. 👏
Agree on the Sherwin-Williams Emerald. It is a great paint for cabinets. We used that to paint our existing cabinet boxes along with new doors and drawer fronts. We found that the 4” mohair rollers from SW gave a nice, smooth finish. That project was completed a couple of years ago and the paint has held up perfectly.
The best i have seen in the cabinet building videos on UA-cam
Thanks, Shara. I'm fixing to make drawers for my daughters' vanities. Very timely!
Beautiful cabinets Shara, I love it! I love that tongue and groove trick with the router!
Thank you so much! I tried cutting the tongue and groove both on the table saw, but it was taking forever. Cutting it with the router was MUCH faster (and cleaner!).
Well done! I like that that you show a sketch of what you are going to build before you build it, hardly anyone else does! Most other's guide you along without any visualization of where you are going! Smart!
I love how you made these simply and they look amazing. Everyone else online wants to do all these dados and other complicated techniques. You made it look so easy and the end result is oerfext
OMG, first time seeing one of your videos. I’m now a subscriber and look forward to watching the rest of your videos. You were straightforward and kept it simple. Using affordable tools most of us have or should. Admitting mistakes and always reminding us of slightly different approaches as well. Great job and thank you for taking the time to guide and share.
Gurl! You done it again. Got my eyes on this plan with an update to that drying rack idea. Add in a heated towel rack! You so good Shara. Keep it up
So glad you enjoyed it! A heated towel rack sounds amazing! So fancy 😎
I truly appreciate you watching and I hope you have a wonderful weekend!
Wow. This would take me no less than about 50 years to build. Awesome job ❤
I'm about to embark on building my kitchen. This video has been invaluable as everything is explained clearly and highlighted areas I hadn't thought of. Excellent.
That tutorial was clear and paced so well that I may be fooling myself into thinking I should try this in an upcoming reno. (Probably not though. But watching you do it - and the excellent graphics you used to explain your alternatives! - are super helpful regardless) Thank you!
was it a tutorial?
Love how these cabinets turned out and can't wait to see them installed in your laundry room! So sorry you didn't like the color and ended up painting them twice as I know that is a job you don't care for! It's worth the effort to be happy with the final color though. You'll enjoy them for many years to come. Thanks for another great video with excellent instructions!!!
You explain really well, you go slow enough for others to follow and your end results are amazing! I'm really glad I've found your channel, you give me confidence to attempt these myself. Thank you for what you do! 🌟
Young lady you are truly a marvel. I so enjoyed watching you so carefully build those cabinets . I have done a lot of renovations on houses that I bough but never had the
moxie to talk on cabinets. The dryer dower was an excellent idea. …
I am now in my 90s it is so good to see you youngsters take on these skills , they add
so much to your quality of life they also add financial stability because it is in your hands…. Good job . Enjoy your cabinets ❤😊😊😊
Thank you so much! The face plates have been stressing me out and you're the first one I've found that talks about what to do on the end cabinets
Well, you sure make that look easy! Thanks
Shara, you're "spot on" for this household (and probably many others) as the weather seems to be breaking a bit and I've been thinking about increasing our storage space with some additional kitchen cabinets for at least this entire winter and maybe even longer. I love the modular style and look forward to using it soon. It's nice to watch a basic basic video about cabinet building and I for one appreciate this. Thanks to you and Bubby. Thanks for Sharing!
Thank you! So glad you enjoyed it :) and also glad to hear the weather is breaking a bit your way. It was a pretty nice week here and we finally got some sunshine. I have a feeling it'll be an early spring and I'm here for it!
Bubs says thanks for watching haha! Have a great weekend and happy building!
What a joy. Extra treat for Bubs!@@WoodshopDiaries
Awesome work! You make it look so seamless and effortless
Thank you so much! I appreciate you watching and hope you have a wonderful weekend!
I am always satisfied after watching your videos and as a result I have bought several plans from you. Once I start to replicate the builds I know I can always come back to the videos as a kind of tutorial to the plans I purchased. Thank you for the detail you put into the videos they always help. I hope more subscribers feel as I do. Thanks Shara
Thank you so much for your support of my small business! I truly hope you find the videos a helpful addition to the plans. It's mostly why I make them :) I appreciate you following along and I hope you have a wonderful weekend. Happy building!
Great video and really well explained. Much better teacher than most.
Thank you!
Very nice, to-the-point, informative and well done. Thanks a million
Love the final paint color - I hope that is the color you kept. You inspired me!!! Love it all.
Thank for your channel. Just found it and it is what I needed to build my own cabinets. Bless you!
I've watched a lot of cabinet building videos, and I have to say your series is some of the best. Very informative and more understandable details. Thanks
Absolutely beautiful.
HEY BUBBY!!! Hi. Very simple project, but also a touch of glamor too. Thanks for the project.
Bubs says "hello!" Haha. Thanks so much for watching--I really appreciate it! Have a wonderful weekend!
Dust collection works well! Great job!
The cabinets looks great and love the paint color. It appeared darker in color in your shop but looks lighter in the laundry room. Can’t wait to see everything you do in the laundry room once it is complete!
Hi! Thank you! Yes the original (first) color I painted them was darker. I repainted them a lighter color because I wasn’t loving the first one. They’re still in my shop in the video :) I’ll share them in the laundry room soon!
Shara, another detailed build! Your instructions get better with each build you do. It seems that there is an endless amount of details to learn and practice. You’re always one step ahead of me! I need to build a new set of cabinets for my getaway mountain house. Thanks for these ideas and I’ll definitely use a set of your plans when I’m ready to start. Thanks again and I’m glad Bubs was there early to supervise your introduction! lol…. Take care and keep on building?
Hi! So happy you enjoyed the video! Bubs is always around when I'm trying to film a "talk to camera" part 😂 He kept meowing in the background and I had to keep starting over haha! He makes me laugh. I hope you have a wonderful weekend and happy building!
PS I'm so jealous you have a getaway mountain house! An escape to the mountains is always nice every now and then!
From your tool setups to the construction methods…what a great video…thanks! You make it look so easy.
Have you ever done any kind of FAQ video? I’d love to know your background and how you got into building! You and Tamar (3x3 Custom) are super inspiring to me as a woman getting into woodworking 🥰
Hi! Tamar is amazing! I have a FAQ video here: Answering 21 of the Most Asked Questions--Come Chat with Me!
ua-cam.com/video/l3qLL4vekow/v-deo.html
Tamar is in a league of her own. She’s a “renaissance” woodworker - multitalented: A thinker, a designer, an engineer, and a builder.
10:35 this is probably the BEST setup I’ve seen to make shaker doors!! I’ll be tackling this project soon and I just wanted to say thank you for the tip! All the other videos I’ve watched have you running them through a table saw on multiple passes.
Amazing work! Love the design. Thank you.
Well done as always Ms. Shara. The drying rack drawer is a neat idea I have never seen before. 👍
Thank you! I appreciate you watching! I was trying to think of some unique ideas for the laundry room. I figured it would be nice to "hide" the drying rack when not in use!
Thank you! I appreciate you watching! I was trying to think of some unique ideas for the laundry room. I figured it would be nice to "hide" the drying rack when not in use!
Well done my sister, the cabinet looks great and I like the final work .
Those cabinets look elegant. I'm so eager to do woodworking, and this was an inspiration.
This was a good build. You did a great job. I especially like the drying rack that you installed. Looking forward to seeing the installation.
Thank you so much! I can't wait to share these in the finished laundry room soon!
The cabinets look great and I like the finale color! You do very good work and I always like your designs. Thanks for sharing this.
Thank you so much! I'm so glad you enjoyed it and I really appreciate you watching. Have a great weekend!
I'm just starting to build a Kitchen Island. I have planned to use mainly drawers and also to do a face frame . I will be making the drawer fonts as slab and no pulls or handels. I will give the top of the drawers a slight angle for a finger pull. I love the way you build. There is always some little tip
Shara you have the coolest projects and videos! You inspire us new to woodworking folks to try making great things!
Would love a tour of your workspace/ tools you recommend for beginners etc if you haven’t done a video on it yet :) so cool, very inspired!
Hi! I have a list of my top five tools I recommend for beginners here: www.woodshopdiaries.com/5-tools-need-get-started-woodworking-less-500/
And a list of must have tools for cabinet building here: www.woodshopdiaries.com/must-have-tools-for-cabinet-furniture-making/
Girl, I'm speechless! First time seeing you and you left me without words. You have new subscriber...
You’ve made this feel really accessible as a job, well done!
You made it look so simple. Amazing job
This is the best video I have come across for making cabinets, you are very informative and detailed in your work, thank you!
Great job they look great
great instructional video. very thorough and detailed. keep making these videos.
Wow...this was so inspiring and empowering! Thank you for taking the time to make this video and for showing how we gals can manhandle wood with the best of 'em. Your cabinets came out fantastic!!
GREAT JOB AND LOVE THE COLOR
Well done!! Great color choice too🤙🏾💯
Noticed lately you been using your game on adding little details to your furniture and face frames on your cabinets
Great job
Thank you! I usually prefer frameless cabinets. But I thought I'd try something different this time and do face frames. I does save a lot of time not having to edge band so much 😂 So I may do it more often now haha!
Excellent tutorial!
Ok, the drying rack as a drawer is a clever idea. Neat. Not sure it's required for everyone, but what a great idea when your space demands certain efficiencies.
Agree. I dont need a drying rack, but made me think what could I build into a cabinet? Endless possibilities.
As always, fantastic job. Excellent cabinet.
Thank you so much! I appreciate you watching and hope you have a wonderful weekend!
I'm so impressed with all the tools! I'm guessing one needs to be great a measuring!
This is the best in depth video I have seen about this topic ! Straight to the point , explain the important details us newbies need to know , while keeping it interesting! Thank you 🙏 😊
I’m a veteran who is thinking about leaving my electrical trade to do something like crafting things made of wood .
Great video! Music enhances and doesn’t distract. Nice work.
Well done Shara. I love the choice you made for the cabinet paint, because I’m on to day two building cabinets with drawers for my new wood shop. I was considering painting them and yours turned out so well I think I will. 🌻
Another great looking project and very much useful. You always make things look simple, but I'm sure it's not to beginners. Love the awesome cabinets and color. I always use Sherman Williams paint also. Always look forward to your Saturday vides. Have a great weekend Shara. Steve
Your video is truly amazing ! Thank you
Good morning Shara!
I absolutely could watch your videos for hours on end! 💯 Please don't think I'm crazy 🤪 I truly love wood working and specifically, DIY wood working to renovate my home. I am stumped and would genuinely love some advise.
Here's my situation:
I'm taking an existing bathroom vanity that has 2 cabinet door sections (1 is under the plumbing and the 2nd half is on the other side). I've taken the non-plumbed side and installed a wall between the 2 halves so that I can build drawers. Seemed pretty simple to me & logical, tbh. It's a small bathroom (1970's home) and we need the drawer space. I measured the space to determine how many drawers I installed. I built 3 drawers (yes, I watched your drawer installation video😉) and made my drawer boxes. The trouble I've run in to is, even though I triple measure the length and width, I don't think I'm square and when I go to slide the drawer boxes, they fall off the slider.
Can you give me some trouble-shooting questions/suggestions to help?
As is stands, I'm frustrated and ready to throw in the towel! 🤯💔
Working on an existing vanity to build/install drawers is a pain in the butt! I've recently had the idea of building an insert that I can build the drawer slides to but that seems redundant.
How would you tackle this?
Ps: I want to build a wall of base depth cabinet & drawers for my kitchen, that surround my fridge and that is a MUCH bigger project but first, I have to get this issue resolved. I REFUSE DEFEAT! #hardheaded #determinedwoman 🤓💪😂🤣👍
That was interesting how you cut the tongues for the rails, not seen that way before on UA-cam. Will definitely give your technique a go. Thanks!
I love this layout. This came along at the right time. My sister-in-law want me to build her a kitchen island. So! this will work out beautifully. The only difference I'll have to do the back different because it'll be used as a eat in bar. It'll be 24"DX32"HX 48"L. Thanks!
Love watching your video’s….your explanations are so easy to follow and I like that you build things everyone would use and give it a try to build…
Great job.
Great video! And timely, as I am about to build some pantry cabinets. My laundry room will follow at some point.
Awesome! I hope this was helpful! Happy building!
I have never seen this method of routing the tongue portion and I love it! I've been going through the hassle of mounting my router in a table, but I hate storing the table since I literally only use it for this purpose. I'm going to try your method and use that storage space for something else haha.
Me gusta tu trabajo, limpio y profesional, felicidades, saludos desde México!!!
Thank you so much! I really appreciate you watching!
Great job and great trick with the router making the rails.
Excelent tutorial - straightforward and comprehensive ✨ Kreg must have loved it as well!
Thank you! So glad you enjoyed it!
I doubt kreg has seen it since it wasn’t sponsored 😅 but if they do, I hope they enjoy it as well!
Love it Shara! Cheers from another gal that likes to build things. Will do this for my bathroom remodel.
Great work.
Nice work. Thank you
Just found your channel, very clean and easy to understand. New follower.
man y'all got some real nice plywood
Love this! I too do not use wood glue. Mainly b/c if I mess up and need to adjust, I can b/c it's just a matter of unscrewing. With the wood glue, once it dries, it's hard to remove any pieces without damaging the wood. Therefore, costing more...
Really amazing work, Shara! They look amazing! 😃
Stay safe there with your family! 🖖😊
Thank you so much! I appreciate you watching and following along :) Hope you and your family have a wonderful weekend!
Everything is ok ... when you see coach kitty is on the spot and in charge!!! 🐱
Haha! The weather was finally nice out while I was working on these, so he was out and about most of the build and didn't hang out. But of course, as soon as I film a "talk to camera" piece, he made his way in the frame ha! He's definitely the one in charge around here.
This was an awesome cabinet video. I really liked your style of explaining why you made the choices you did and some other options that could be used. Subscribed!
Excellent overview of the process. Thank you for sharing.
It's amazing to see you're still using your rip cut. It bought one after watching some of your videos. Haven't used it in a long while 😅
I’d be lost without it! I use it almost every project!
Epic build as always Shara! I'm never much of a fan of painting cabinets or wood in general. But I would be lying if I said that finished color didn't speak to me.
This is exactly what I was looking for!
You did amazing!
Thank you, this has been so helpful.
Basic base cabinets! (say that three times fast...) I'm looking at shaker-style cabinets in my den as I type - I think that style is "elegantly simple." Great job in the intro explaining the dimensions and options. I like your methods, and kudos for discussing options for how the approach you demonstrate can be adapted. Lookit Shara busting out the router for some frame-and-panel work! Very nicely done. Personally, I really like the second color and hopefully it will grow on you once they are installed. P.S. I spy Bubs 1:20 . P.P.S. not a hint of anything clicky or baity...😉
Thank you! I hope the extra info was helpful-there are obviously lots of ways to build the exact same thing 😊
Also, the router is slowly growing on me. I convinced my husband to set up my router table last week because I HATE setting up new tools and I’ve had it for well over a year half assembled 🙈 so maybe next time I can use that instead of the handheld ha!
The weather has been warmer and sunny so the pets stayed out and about most of this build-of course until I needed to talk to camera and here comes Bubs 🤣
I hope you have a wonderful weekend and I appreciate you watching!
Seriously? Again? I just finished the Pantry and my wife and I were talking about the laundry room. We were deciding on buying some cabinets or just building some and then you do this. Guess I'm heading over to the site to buy the plans. I'd be upset if it wasn't for the fact EVERYTHING I've built from your plans turned out perfect.
Seriously though thank you for all the woodworking you've done and shared. This, once again, saves me the time of drawing up my own plans which normally has something missing I forgot to add into the dimensional cuts.
You just finished your pantry and I'm about to start mine! I just finished my laundry room and you're about to start yours! Great minds must think alike ;) haha.
I don't have printable plans for these (although, I do plan to make a guide to building them in several standard sizes!), but hopefully the instructions on the website are helpful. I did include a cut diagram--and they're free :) I truly appreciate your kind words and love to hear you find the plans from the past helpful for your builds. Thank YOU for watching and following along!
@@WoodshopDiaries I saw the directions and cut list. Thank you for putting those up there for everyone!
I saw the wedding band, but do you have a sister ... that of course, has your knowledge? LOL!! All kidding aside, awesome video. Love how you ran through the entire process and incorporated the 3D modeling.
Brilliant job ...I'm extremely impressed .
Thank you so much! So glad you enjoyed it!
Love your video! Right to the point on everything I wanted to know without any extra unecessary commentary. I will definitely refer to your vidoes again! I wish more people were as aware as you are about what makes a great DIY video!
Gosh girl, you do it so well and make it look easy🤦♀️😆
Très joli travail bravo,une technique de fabrication relativement simple et très bien expliquée,merci,à bientôt salut Jeannot 🛠😉
great tutorial. your approach is perfect for beginners to understand and follow. great tips and. im ready to jump in and see how my cabinets turn out.
Good job I like your presentation. No fluff just practical tips for easy assembly!