Not much need unless u replace the solenoids with blue tops. Check out legit street cars channel. The tcms are plug and play and not serialized to the vehicle the same way the ecu is. So u can order a tuned one if u are running upgrades on your valve body.
Hi there Got a problem with my t1n 2.7 cdi. Van cuts out when accelerating round about 60-65mph ones warmed up. And it will cut out few times if I'll try and restart. And there's no crank. It looks to me as it might be an electrical issue somewhere. Code come up - glow plug cylinder 1 and 2 I've replaced the 1 but to nut broken in and spinning now. However it's still starts and currently runs with that problem. Injectors have been sent for a test came back fine. Would you mind me asking where to look for the electrial problems? Thanks Rus
Hi yeah engine cuts out the restarts instantly. However sometimes it's quite bad it'll stall and will take few time to restart. And will drive but I'll have to drive under 50mph, if I'll go faster it'll do it again. It was a pain driving back from France 😮
@@MAX_1082 well I have heard the fake version of scanmatik works ok, I havent used it though, it comes with all the modules too so you won't have to pay extra for your specific bosch protocol EDC17xxxx
I've got a 2021 2.1 4 cylinder diesel rwd, do you know what fuel filter I should get? I feel like the dealer and local shops are all charging me over $100+ for the fuel filter. Not sure if that's normal or if there is a mann fuel filter I can get.
Glad u asked. I was actually considering doing a video on this as there are at least 5 different fuel filters and there doesn’t seem to be much rhyme or reason as in terms of ability to predict based on engine or model year. Unless u have merc inventory program. Best thing to do is peak under hood and take a couple picks of the top of the filter. Check for part numbers. They’re in different places and sometimes printed across the side. Hope this helps
there are a few options for this. One is a clone from china which is very cheap on ali express, just search sm2. I bought original from a site called tuning.energy which has since either changed domains or gone out of business. total cost for original with accessories and software was 1200+. Cloned device has all accessories and softwares for various years
I would like to learn how to tune the sprinter to get better mpg and power.
Folks used pcmflash to do a def and dpf delete.
Yep. PCM flash is what I am using in this video for the software. Hardware is of course scanmatik pro.
Can you do the same thing with the TCM from a sprinter as well?
Not much need unless u replace the solenoids with blue tops. Check out legit street cars channel. The tcms are plug and play and not serialized to the vehicle the same way the ecu is. So u can order a tuned one if u are running upgrades on your valve body.
Hi there
Got a problem with my t1n 2.7 cdi. Van cuts out when accelerating round about 60-65mph ones warmed up. And it will cut out few times if I'll try and restart. And there's no crank. It looks to me as it might be an electrical issue somewhere. Code come up - glow plug cylinder 1 and 2 I've replaced the 1 but to nut broken in and spinning now. However it's still starts and currently runs with that problem. Injectors have been sent for a test came back fine. Would you mind me asking where to look for the electrial problems?
Thanks Rus
This is a real tough one. When you say it cuts out do u mean the engine dies?
Hi yeah engine cuts out the restarts instantly. However sometimes it's quite bad it'll stall and will take few time to restart. And will drive but I'll have to drive under 50mph, if I'll go faster it'll do it again. It was a pain driving back from France 😮
I am confused about which model or models of PCM flash are needed to read the ecu file of Sprinter.
Different year ranges require different pcm flash modules. what year is your van
@@sprinterfix is 2015 sprinter 906
@@MAX_1082 you will need what they call their edc17 module. and the pin out will be different. where r u located?
@@sprinterfix I live new york
@@MAX_1082 well I have heard the fake version of scanmatik works ok, I havent used it though, it comes with all the modules too so you won't have to pay extra for your specific bosch protocol EDC17xxxx
I've got a 2021 2.1 4 cylinder diesel rwd, do you know what fuel filter I should get? I feel like the dealer and local shops are all charging me over $100+ for the fuel filter. Not sure if that's normal or if there is a mann fuel filter I can get.
Glad u asked. I was actually considering doing a video on this as there are at least 5 different fuel filters and there doesn’t seem to be much rhyme or reason as in terms of ability to predict based on engine or model year. Unless u have merc inventory program. Best thing to do is peak under hood and take a couple picks of the top of the filter. Check for part numbers. They’re in different places and sometimes printed across the side. Hope this helps
can you please share what processor number is used in 2006 sprinters ECU where WIN and KEY data is located. Thank you.
Do you tune them for people
Yes but I only assist locally in dfw area. Too much hassle mailing ecus back and forth
@@sprinterfix Man I have a 07 that I badly need help with. I would send it to you with pre paid boxes back to me.
@@jamescoleman6269 send me an email. Val.notman.cms@gmail.com
Hey? You think you could enable my cruise on my ecm 2006 dodge sprinter.
Sure
What device are you using for the pass through?
scanmatik 2.0 original. super powerful, I can also use it as a passthru for mercedes software Xentry
I had to replace my T1N’s ECU and WSP. Can you tune the cruise control to work?
I have never done that but I hear it isn’t too difficult. Sounds like your new ecu is from a van without cruise control. Is that right?
Link to buy devices
there are a few options for this. One is a clone from china which is very cheap on ali express, just search sm2. I bought original from a site called tuning.energy which has since either changed domains or gone out of business. total cost for original with accessories and software was 1200+. Cloned device has all accessories and softwares for various years
@@sprinterfix link looks sketch
@@LoganGilpin haha, not sure why people don't trust websites that don't end in .com or .net. theyre all the same
Can you please do more tuning videos.
Absolutely. Are you hoping to get more info on how to make a clean copy of the ecu? Or the process of remapping after the ecu is copied?
Both, clean copy and remapping. Thank you!!!
Very interested in more detail of this
Ok. I’ll have a couple more coming your way
Need ecm reprogram for 2011
Come to Dallas area
Cool video, you should do a few more on this subject. Super helpful
Nice cat. I’m not sure if anyone would watch more on this subjunct unfortunately
Love this
👏👏👏👏👏
@gabaknegocios