Spark plug replacement 2013 Ford Edge 3.5L V6. Lincoln MKX How to Install, remove or replace
Вставка
- Опубліковано 24 жов 2018
- Spark plug replacement 2013 Ford Edge 3.5L V6. If you are wondering how to install or remove or replace a part on your car, I hope this video will help show you how to change it. This video could help for other years as well, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 Lincoln MKX, Ford Taurus, Ford Flex
Check out Amazon's parts for your vehicle - amzn.to/2bIxfGJ
2020 has really shown me I needed to be better prepared for the future, start saving/investing now. Use some of that money U saved by watching DIY videos to plan for the future. Click to get started today.
Etrade - refer.etrade.net/thechoice1pr...
M1 Finance - m1.finance/CGW7TTw5ZqYQ Buy Fractional shares on M1 or Webull.
Get 2 free stocks with:
Webull - act.webull.com/nt/3hiKwUuORU2...
On Facebook Become a Fan! - / fixingcarsandstuff
Grab a shirt or hoodie to support this channel
www.printmotor.com/fixingcara...
This video may work for other years, makes and models -
2011, 2012, 2014, 2015, 2016, 2017
Ford Flex
Ford Explorer
This Channel provides videos for informational purposes only and cannot be held liable for injury, damage, problems that arise when trying to duplicate steps shown in videos because it is impossible to account for all possible circumstances and situations. Please do contact a qualified auto technician in your area before attempting any work you feel you are not qualified to do. If there is an Amazon link, and you go to Amazon through it, if you purchase anything there I will receive a commission.
Outtro music snippet, by: joshwoodward.com/ Good To Go - Josh Woodward
creative commons license.
Really makes me appreciate my 1979 F-100 and how easy it is to work on it when it does need attention
Just did mine today great Referance Thank you.. While I was back there I changed that PVC valve as well the local guy quoted $275 just do the valve...
This video was great! For once, I actually had everything I needed to get the job done in one session. It took me about 3 and a half hours to do this myself, but it resolved my engine misfire issues. Thanks for posting!
Thank you!
after watching this vid, took me about 2 hours start to finish to change the plugs on my 2012 Edge limited 3.5 L...much thanks...
WOW ! Great video. Convinced me not to attempt this on my own. You are really detailed and I am sure have help many do the job right or like me, get a mechanic to handle the job.
I have a 2013 Edge and have to change my plugs soon. What a pain in the butt it is to get to them. When I had a Tauras it was so easy, the plugs were right there and you didn’t have to take all the crap off. Thanks for the informative video
Man thank you for this video, got the plugs changed just fine just as you showed! Awesome thanks for the directions!!
Still a relevant how-to video in 2023. Thanks for the excellent attention to detail. Plug clips and friction clips are so finicky. So, you thatking the time to show that is great. I just replaced the myford touch sync 2 digitalizer on my 2013 edge and the interior design is just as absurdly crammed together and running over itself as under the hood it seems. You've been a great help!
Hello my friend, Thank you so much for the help. I just wanted to tell you something about that troublesome back hose. I could not get it back on!!!!!. So I put a 4 1/2 inch in place of the 2 1/4 and stretched out the end with a punch, put the after market hose clamp on and tightened it up after installation. Worked perfect.
I follow the video and all these directions you gave watch it over and over again and I change my spark plugs great videos my SUV runs great now thank you for your advice and your expertise
Thanks for the video...just did the plugs on my wife's 2013, took me just over 2 hours.
I’m surprised you didn’t disconnect the battery before unplugging those electrical plugs. Glad you didn’t have to drop the engine to get at those back plugs!
This was the best video. Worked perfectly on my 2011 Edge. Note: if you over torque the intake bolts even by a little bit, they will snap.
Just a quick thanks for the video. Been working on my own vehicles for years, but seems more and more I’m having to look up how to do once basic things, like changing spark plugs. Took almost 3 hours, but it’s done, and your video really helped. Thanks again.
Great video. Made the job so much easier. My son and I got the job done in 2 hours. If you take your time it isn’t as bad as it seems. Motorcraft plugs come gapped at .051. We did replace the gasket and PVC value also. We also disconnected the battery.
Thank you for a very well documented video and not skipping any steps in the process was able to follow video easily and replace the spark plugs. First time I’ve ever had to do this in depth of an auto tear down so again, keep up the great work and video quality. The hardest part of the entire process was trusting my calculations from inch pounds to foot pounds and setting my torque wrench up correctly 😂
Jesus this is the biggest pain in the ass to change spark plugs out of any car I've ever had. Wow. Thank you for the video though, this would have been even worse to go in blind.
Thank you for the video. Even here at the end of 2020, it's still very relevant and was my "go-to" reference piece. I tackled this project on my daughter's 2012 Ford Edge SEL 3.5 the day after Christmas. Even changed the "pita" PCV valve and changed the oil.
This was a great video. Thank you. I changed my plugs today, and a coil pack to solve a P0301 error code.