@@Bloodster8 The verge pc build actually jump cut many times to things being installed correctly. This one was actually just built correctly, badly correct, but correct. :D
@@real_bork7858 Your friend probably clicked a link in the bot's comment by mistake. To my knowledge, there aren't any known exploits that enable an account to be stolen through replying to someone
Just as tooth clenching when the SSD was held and swung by the SATA plug alone, and shaking the case upside down to see if the board wouldn't fall out. Why didn't she have an instruction booklet for the motherboard?
Huge props to Sarah for being so willing to be the “person who doesn’t know computers” on a tech channel. She does a great job and is super charismatic. A+ job, you did better than I probably would have with the info you had!
She deserves a medal. She willingly walked into the Linus Man Cave and with good humour and enthusiasm, she took on the challenge as a novice. I enjoyed this video.
And I think she nailed it. Two little tips and the PC is running. Really awesome. This video could free a few people from the fear of building a pc yourself.
Hey there, I totally get where you're coming from! Building your own PC can be a daunting task, especially if you're new to it. But trust me, with the right resources and assistance, it can also be an incredibly rewarding experience. Don't be discouraged! There are plenty of helpful guides and tech communities out there that can offer step-by-step instructions and recommendations. Feel free to ask any specific questions you have, and I'll do my best to provide valuable insights and assistance. Let's optimize your tech setup together! 💪🖥️
Honestly I never used part picker always google. Probably me being dumb but oh well. What works amazing as well is chatgpt. Not only does it tell you compatible parts it can also be asked parts that work well with others. For example what gpu works with ryzen 5 5600 and it’ll give you a list. Also building in general. If you’re new and have questions you don’t wanna waste time finding answers for on google chatgpt can help you pretty fast and explain any problems and fixes.
@@hlarjay7503same, I would have totally gotten a different sized motherboard than intended and a way larger AIO than it could possibly fit in my case 💀💀💀
Huge props to Sarah for this. Doing something you're not good/experienced at in front of a crowd of people (both in person and virtually) who are either very good or at least better than you takes huge stones. And to have such a fun attitude while doing it is really intoxicating to watch. More of Sarah, she's lovely!
Totally agree. I actually didn't expect to hear her say that she enjoyed it so much! It was really fun to watch, and it is making me even more excited to build my own! (Yes, I do have a gpu. :P)
The best part of this was witnessing her gargantuan quantity of confidence despite being inexperienced. And then agreeing to have it filmed. One day I hope to worry this little while assembling a computer.
Hey there! As a fellow tech enthusiast, I can understand the challenges of building your own PC. It's a complex process that requires expertise and experience. However, with the right guidance and resources, it can be a rewarding experience. If you're looking to optimize your desktop setup and extend the lifespan of your notebook, I highly recommend considering the HOTO Compressed Air Capsule. It offers powerful vacuuming and blowing capabilities, making it an essential tool for maintaining a spotless environment. It's compact, versatile, and has some great features that make it stand out. Check it out and see if it fits your needs! 🖥💨
Hey there, {{3}}! As a fellow tech enthusiast, I understand the importance of keeping our setups clean and maintaining optimal performance. Have you considered the HOTO Compressed Air Capsule? It offers powerful vacuuming and blowing capabilities, making it a versatile tool for keeping your desk, car, and other spaces spotless. It's reliable, reasonably priced, and offers excellent features like multiple tubes, high-quality filters, and efficient storage. Give it a look! 😉
I love how enthusiast she is about building something she has no knowledge about, while being surrounded with people that do that for a living and are silently judging her. Good spirit, good video !
I think it's an essential building block to learning. Humility 😂 I know I did when a friend got me to take apart my first PC and I put the CPU on top of a foam sponge while I took off the screws with a baby kitchen knife
I think the horror in me is the fear that a lot of the PC master race will conclude because of one woman that women don't know technology or aren't well suited for the IT industry.
I will not dog on sara, this is a PERFECT example of "Well I've never done this before I don't understand anything about it, let alone connection tolerances." That said, truly had me rolling at the GPU, the horror.
@@Stand-as-One_Virox even so, if someone like sarah can break the connector loose, it's a bad design. Ignoring Laptops, these ISO connectors are also expected to be used on computer systems that while they may not be used while in motion, will be transported a lot, and subjected to stronger forces. If someone like Sarah can cause a failure by shaking it, the manufacturer failed. These are consumer grade products, and shipping while assembled should be an expected stress on the product.
"I don't know what I need to be gentle with so I'm going to be gentle with everything" VIOLENTLY SHAKES AND DROPS AND WIGGLES EVERYTHING 😭😭😭 love her enthusiasm tho
Now I want to see Linus trying to design a LTT store shirt from scratch, also while having 3 “hearts” and investigating by himself with Sarah reacting. Edit: sell it as a limited run obv
Linus builds PCs standing up. Even with an overhead camera mount, so he has no excuse. If you saw anyone else doing it, you would laugh and say amateur. First step of working with the tower/case.. you lay it down. There's this thing.. it's called gravity.
It was WAY more stressful for Linus to watch than it was for her to build. My daughter built a computer with me standing there to answer questions. I did install the CPU cooler as she was not sure about that.
Definatly. Their are a lot of small (and huge) things that have to change for tech. TLDR,BLUF: Working with a verticle case just sucks ass, just about no room to get things in to it. Parts with cute sounding parketing names: no clear marking what several different looking slots are. Documentation that's utter ass, riddled with jargon that is tech heavy, and just not done for joe average to know which thing, does what. Just even upgrading a computer I was given as a stupid amazing present. tracing what wire goes to what was a un-needed headach, getting the god dam wires out of small slots, things to be reseated,. All the fucking QOL things these assholes refuse to do with very fragile, very expensive parts. Drives up the fucking wall! YOu have practically sacrfice someones soul just get the god damn thing to start and all the shit to phyiscally fit, wade through a fucking night mare of how to's with no fucking direct insuctructions For example: see this green slit/nob/.thingy/ Put in this other greenthing. And the parts might even available! it's fucking insane!
I think it is unrealistic to expect anyone to go into this on their own. Everyone I know came to me if they wanted a computer, asking if I could help them, which I could.
She wasn't on her own, she had linus and most importantly google If she actually thought about watching at the very least one video she would t have had this much trouble
Meh, I did it on my own and everything turned out ok. Definitely scary and I definitely did more research than Sara seemed to but honestly after seeing this video I have a new respect for the durability of these parts.
"I don't know what parts I have to be gentle with and what parts I have to be rough with. So I am going to be gentle with everything" After this I was feeling less worried. UNTIL SHE PROCEEDED TO SHAKE ALMOST EVERY PART LIKE THEY OWED HER MONEY!!!
She would probably find it way less fun if she had actually purchased all of those components herself and would therefore have to take the loss if she had damaged anything. That's the only legitimately stressful part about building a pc as a total newbie. You've spent all of this money on components and now you have to assemble them all without screwing anything up. If you do, you're on the hook for replacing it. Something tells me she might have been a bit more cautious if that were the case
I always partially build some of my PCs myself, but I always was scared of damaging the CPU. But after doing a complete build, I realized that installing the CPU is probably the easiest part of the entire build xD
No, I don't think that's that. She wiggled the GPU (and other stuff) because she was worried that if it was not secured it wouldn't work or would create some problems (more than she was worried about the connectors). However, if she had to buy all these things herself, she wouldn't have gotten to the point of deciding whether or not to wiggle the GPU, because she wouldn't have done any of it to begin with - she'd have bought a pre-built computer, like 99% of those who buy a desktop do.
@@KEEYBLADE agreed haha. Installing the CPU is a weird process, but it's very straightforward and has basically zero room for failure, because either you do it right, or you can't do whatever you intended to do. If you have the common sense not to force the CPU into the socket, there's nothing that can go wrong, normally.
The first time I dealt with a 486 (PCI at that!) and I removed it for some reason, then I put it in backwards and turned it on. The CPU survived! The board was replaced under warranty. I was 14 IIRC?
She did fine for somebody with no experience at all. The fact she was able to look at the motherboard itself and figure out where to plug things in is better than anybody else I've ever tried helping personally.
Especially because from what I could see, because these things were from LTT’s warehouse, she probably didn’t have any of the manuals that might’ve helped.
she really should have had a i cant remember what its called but its a static strap that goes around your wrist and connects to the computer chassis to ground you and keep you from frying the computer.......its like training wheels for newbies
@@marinmarinhola ya true for people that have been workin on computers for a while, that becomes second nature but not to newbies.....and you just need to be in physical contact with the chassis to be grounded, not just the PSU
Props to Sarah for being vulnerable. I know quite a bit about computers and yet I'm still not confident I could build my own PC without some amount of help.
I think she basically roasted linus when she said "I've been watching the videos and it seems that's how they do things" - while banging the motherboard on the desk.... lol Linus this is your fault!
Props to Sarah. She did an amazing job, especially for a first timer. Combined with the pained looks from Linus when the "fit tests" were done, this was great fun. More please!
@The13thRonin Women invented that word. Take it up with them. Seriously you didn't even watch the vid and still thought to comment. There's your cringe. Ok enjoy your block.
This is the most informative PC build video on the internet for a beginner. Having someone mirror all my uninformed thoughts and then an expert rim them point by point is so helpful
Me making a guest appearance at 16:44 👀👀👀 Just trying to help Agent Sarah on her journey, but we definitely don't recommend duct tape for mounting a SATA SSD.
Damn not going to lie my heart was dropping down my chest watching this what type of person is spoiled enough to think they can treat delicate hardware and expensive items this way by forcing them in to each other and shaking each product to test if it is actually installed makes no sense her mentality is trash with no common sense would suck to her boyfriend 😂
@@johnpatrick5282 dafuck i want to see u do ur GFs makeup and see ur common sense. Its only common if u always do it if u never build a pc u litterally can’t know these things people tend to forget how the beginning was once they get more advanced or once te basics become second nature
Just binged this entire series and I have to say: Bravo Sarah People are so afraid of doing things they aren't comfortable with regardless of the situation. Much less pushing forward in front of millions of viewers. Going in blind is tough, and uploading a video of you going through all of these pitfalls (especially in an industry historically caustic towards newbies) is so badass. Very cool
tbh there were no consequences for fucking up here. irl there's usually consequences, which is why most people are afraid of doing things they aren't comfortable with.
Yeah, she had a team of very supportive people behind her and was definitely building a PC with not her money. I was referring specifically to the act of uploading a video where she is engaged in an activity that she is hilariously and frightfully unpracticed at. I know that I would be too scared of the potential shame I would get from the tech community to publicize my unwitting errors
She has several advantages, namely that she say through secret shopper and at least *knows* what parts there are in a computer... My boss wanted me to write up a purchase list to build a new PC on the office to edit 8K video from an Insta360 Pro 2. He was horrified at the list I presented at the end and was convinced I was trying to rip him off. It took 2 hours of explanation just to get him off my back, he was asking why we needed a 'gaming' system and why can't we buy a normal one. We haven't gotten that PC in 2 months.
I get that the point of this is to show an extreme example, but it's pretty misleading and a bit unfair to her. I started pretty blind but I definitely didn't pick my parts in one sitting and was watching a guide/referencing the manuals the whole way. Which is just... what you should do when you're not building a computer on camera with time constraints. I have to imagine her experience would be pretty different if she was doing this on her own time and didn't have a limit on asking questions. But even then, she figured it out!
Well, this is LTT. Their purpose is not to portray reality; it's to entertain their audience. Which makes the whole bit where Linus criticises companies for not making things easier for average consumers come across a bit... I don't know, a bit fake? Like they haven't earned the right to criticise anyone, because they intentionally made it harder than it should be? Almost. I mean, he's not wrong either. I'm somewhat tech savvy, but stopped following PC hardware quite a while ago, and the current landscape is confusing even for me. An average consumer has no chance of making sense of all the confusing model numbers without doing a ton of research, and most of the information they'll find will fly right over their heads. It's just that, he makes it look like the true thing he says is a conclusion he draws from Sara's struggles. But most of her struggles were caused by the format they enforced on her.
@@EvenTheDogAgrees considering this is a follow-up to the secret shopper videos where the whole point is to just have a person with no knowledge on the subject buy a computer very quickly, it wouldn't make any sense to have her dedicate the time most people put into researching parts and the process. There are artificial restraints put on her but by no means are they unrealistic, and it does show that companies can do a better job explaining model numbers and things such as that for the average person.
"I'm not sure which parts are fragile and which parts are not so I'm just going to be gentle with everything." Proceeds to roughly handle every single part.
i mean, work means helping the company to get bigger. And, if she is clicking on the forum many times, than its higher rated on Google, so LMG gets more reputation and more people get know to about it. Aint that much more work? So she is working for sure!
Bruh, I had a heart attack when she put the board in and shook it, since the screws being put in were cut from the video. Whoever edited that part out, you are evil.
I just think about decades of development. The science. The engineering. The manufacturing precision. The technological achievement that is the modern computer. Then Sarah over here “shake, shake, bang, bang”
@@iamapant8142 almost all pcs can handle an earthquake. much more so than houses or other large structures. my laptop for example can survive being flipped 720 degrees and landing on a pillow, can your house do that?
@@Omonarc To be honest, though, there's really bugger all difference installing Windows and installing Linux. Write the ISO you download from their website onto a thumb drive, plug it in, turn on the PC (and maybe fiddle with the BIOS settings to get the boot order right, if it ain't already going to the USB before the hard drive). As for configuring Linux, unless there's an actual problem that needs fixing, I'd simply say "don't". Get a friendly distro and just go with the defaults. Use it exactly as you would use Windows, with the GUI, and don't unnecessarily mess with anything. Then, honestly, it's no different to Windows. I know this because, to save it from the garbage, I installed Ubuntu on a netbook for my mother, who's in her 80s now, and - absolutely genuinely, no word of a lie - I get vastly less calls for "tech support" from her for the Ubuntu netbook than I do for her Windows 10 laptop (and she uses the netbook more often, as it's more portable for using casually in the living room, while the Windows 10 laptop kind of stays where it is, as it's hooked up to a printer - and, in fairness to Windows 10, most of her calls for "tech support" from me usually relate to the bloody printer not working). Seriously, first time that I installed Linux, I was messing around with the configuration in all directions. Trying to maximise and tweak and customise everything, and upgrade everything to the "bleeding edge". And I made it horribly unstable. So I re-installed it and then left well alone. In a sense, this is the thing people coming from Windows need to appreciate. Open source works differently. Because it's open source then, yes, I am able to re-configure absolutely everything - hey, I could even crack out the source code and alter the kernel directly, if I really wanted to - as nothing is secret or hidden in the entire system. And, yes, you can get carried away with that. Because, on Windows, I can't really do anything, so being allowed to tweak and customise and configure it all can be an intoxicating freedom. But, honestly, unless you have good reason and know what you're doing, then simply don't. Just don't. Despite what Aperture Science might say, you don't have to do it, just because you can. Oh, and open source affects how you should look at software. With Windows, you get a new release and you instantly rush to install the latest version. But, with open source, the software is permanently released - if you really want, you can download those "nightly builds" and literally have the software as it was last night - so, actually, curb your enthusiasm a little. Unless you have reason - like you want to join in with testing and development or something - then just grab the version labelled "stable" or "LTS". You don't want the "bleeding edge" of the "nightly build" because that's the software still in a state of development. It's unstable and in flux. The hatches have not been battened down yet. Basically, if you treat Linux like you treat Windows - with Windows, you can't make many modifications so, in Linux, also don't try to do that - then it's no more difficult or problematic to use than Windows is. The problem is that Linux provides freedom - and people instantly want to start messing with that and then start breaking things. At work, I run a whole cluster of Linux servers and do all sorts of mad shit to make it work. But, at home, I mostly leave my Ubuntu alone and in its "out of the box" configuration. It works fine. (But the great thing with Linux is that, well, I can get myself a Raspberry Pi 400 and then that's the machine that I can tinker with to my heart's content, not caring if I break it all. But this laptop is my daily driver, so even though configuring Linux is pretty much my day job, I leave well enough alone and it works perfectly.) But this is understandable - as I say, initially, I did exactly the same thing. When you've been caught in Microsoft's "closed source" trap all your life, then to taste freedom can be intoxicating. All these configuration files and I can do whatever I want with them all. Awesome! But, well, "with great power comes great responsibility". The responsibility of such freedom is knowing when you should and when you shouldn't exercise it.
@@klaxoncow You can make the same argument with MacOS and Windows. It's all relative. For me, Windows gives me the level of control I need over my computer without things getting too complicated. I know I would mess around with literally everything if I used Linux and ruin it. And I've used MacOS enough times to be disgusted at how it treats me like a child. 🤷🏻♂️
This gave me some confidence to build my own computer, and I really love Sarah's optimism through it all and at the end! I have my parts picked out (took me two weeks to pick...) and I think I'll have a lot of fun putting stuff together and even troubleshooting. I've fixed laptops a ton before, so I don't imagine that this will be much harder I hope...
@@iced_coffee_table Ha, it went fine! No issues at all, the computer runs fine. I haven't seen any temperatures over 55 C. I even pulled my old hard drives from my dead laptop and plugged them in too. Okay there's one small issue. The case power button is in a prime spot for my cats to accidentally push it. So sometimes I think the computer has an issue and turned itself off, but every time it's been one of my two cats pushing the power button.
This was actually really educational. She does a good job explaining her thought process and problem-solving combined with your commentary (which wasn't too judgemental) actually provides useful scaffolding for those of us who might want to build a PC in the future. Thanks!
I very much agree. I think UA-cam started recommending this channel to me right after I built my PC (either related to Windows 11, building a PC in general or applying thermal paste, see below). If had seen this before building I would just have assembled everything instead of 1. Assemble everything and be happy. 2. Realise that thermal paste is a thing. 3. Buy thermal paste. 4. Spend a lot of time trying to figure out how you're supposed to apply it. Might be what led me to this channel in the first place. 5. Remove the CPU cooler (which was the hardest part to install in the first place). 6. Finally realise that there was thermal paste in there from the beginning...
Agreed although... As an experienced PC builder with 7 builds under my belt... Watching this was painful at times. I genuinely flinched when she put the motherboard in the case; thinking about how easy it would be to leave a standoff in the wrong place. I was also relieved when her attention to detail saved her from plugging the PCIE into the CPU power. Never done that myself but- I've seen plenty of horror stories of people learning that lesson the expensive way. What she really needed was somebody to walk her through the process patiently... and explain on the small details like standoff placement, thermal paste application, grounding herself, PSU/CPU/PCIE/MOLEX/ETC power connectors and cable management(Because cable in CPU fan is bad). Also motherboards are surprisingly durable when just pushing things straight down... Excluding the tiny CPU pins- You'd be bending the motherboard under the kind of pressure you need to break a DIMM/PCIE slot... So should any common sense be in that Noggin; chances are that isn't how you'd break the PC.
I gotta support Sarah's shake tests. I used to work at a company where we shipped PCs to customers, we called that the "UPS test". UPS/FedEx used to routinely do far worse to the systems we shipped out. We wanted to have some confidence that the systems would arrive intact.
I was thinking about this too. They have her be agent-Sarah - call technical support with supposedly all DIMMs needing to be reseated. And then Linus complains that she shakes thinks when building it to check things doesn't fall out?
But there is packing material specifically for that. And you don't want to enable bad method practice from end users, else they could/would be creating problems that they initially wouldn't have had.
Used to work for DHL.....NEVER write "Fragile" on a parcel.....You asking it to be "launched" across the warehouse!.... And yes people are that big an arsehole!
if only ups was shaking the parts just as much as in this vid , but experience tells me when the gpu is laying in the case wit the slot still attached to the card and not to the motherboard , they are shaking it much harder (ow not to mention both screws to hold it in place were torn out and the holes they should screw in a little larger and popped inward) , and me a more experienced pc builder , still get screwed over by manuf. bu a motherboard with features listed , thinking ow this has adequate pci-e ports , and enough sata & m.2 onboard , buy it build it half the stuff not working,... mmmm ow they build in a switch you can use all the sata but only in combi with 1 m.2 , if using two m.2 you lose 4 sata ports , ow and if you use pci-e port 4 or 5 yeah the one m.2 is disabled anyway but you can use all the sata , right? nope , you could use pci-e 2 but not really cause its behind the gpu now so no acces, ah my prev mobo had 2x16x slots but this one only if you dont use any other pci-e port the pci-3 is a ... wait 8x port and pci-1 is also 8x when configured like that. (its not even wired for 16x, al the rest is only wired for 4x or 1x ) my 12year old (something like that) msi z77a gd65 had same pci-e gen and 3 fully wired 16x 6xsata +2xsata no m.2 but you could use all pci-e ports so a pcie8xto2x 4x m.2 fixed that nicely, and if the pcie switch used was software controlled so you could hot switch between stata or m.2 would be nice but its activated by wheter something is in the slots or ports or not
Exactly. We were all Sarahs at one point too. Waiting for my PC parts to arrive, I built up an encyclopedia of knowledge about PC building to make sure I don't fuck up lol. Also consulted tech forums about which parts to buy. Gotta say, it was extremely satisfying to have my build POST on the first try, without even testbenching it.
@@yungwallacebenson8381 LTT (this channel) has some great videos on how to build PCs, some long to cover the whole process and some short to cover specific tricky components, and there are loads of other guides and videos available all over the Internet. Just try to avoid marketing nonsense making you pay for things you don't need - like how Linus complained about overspending on the motherboard in this video, or how RAM above 2666MHz is pointless for Intel Core CPUs below i9 or without a K at the end (e.g. i5-10500K) as the CPU will limit the RAM speed. PC Part Picker is a great resource for planning your build, though their database does lack some things and you should take their prices with a few pinches of salt as they just show the cheapest price found across a bunch of websites that may or may not be accurate or in stock - but it is great for compatibility notices and tuning your budget vs. expectations. Also, while Linus is sceptical of the analogy, it really is like adult LEGO. Other than some PSU cables which could really be labelled more clearly, the sockets are totally different so you literally can't put a GPU in a RAM socket, for example, as it doesn't even look right at a glance. If a component doesn't line up with a socket, don't try to insert it. Other than that, just treat all the parts with a lot more care than Sarah demonstrated in this video. And remember: there are sites (like Overclockers and PC Specialist in the UK) where you configure a PC online as though you were building a spec list on PC Part Picker, but then they assemble it and test it for you. Yes you have to pay for the service, but it can be almost as flexible as DIY with the benefit of an experienced person assembling it and you get a warranty. It's a very comfy middle-ground between off-the-shelf PCs and DIY builds.
@Bruine Poep Right. They told her "take your time, watch plenty of UA-cam videos as you see fit because spending two hours on UA-cam and then knowing what to do makes for great sponsored entertainment!" Maybe somebody didn't have the patience to re-pack things properly? The least they could do is provide the parts as they would have arrived in the mail, including the frickin' manuals. But it really isn't THAT big of a deal in the end, just an observation.
@Bruine Poep dawg what do you mean. The manual especially for the motherboard is essential because they all have different architecture and positioning. At the very least everyone should have a mb and case manual.
@@Psychomalfoid It was for me. I have no shame in telling that I read the manual so carefully and watched so many videos and articles but still thought I needed the help of my bro.
I'm guessing it's partly because she's surrounded by tech heads, while the verge guy was surrounded by knuckle heads who were as clueless as he was.....
My first build took over 5 hours, I was wearing a static band and constantly discharging on the case and checking tutorials between every part. My last build took 30min from old and recycled parts I was eating pizza over it the whole time and chatting with friends on discord
haha nice i built my first in about 5 hours 2 extra hours because i hadent connected sata to my HD, Second build 10hrs but fully custom watercooled baller waste of money :D
Honestly, I'm proud of Sarah. The attitude she had at the end of the build; she could have been one of those people that just focused on how much the struggle sucked but instead she focused on how rewarding it felt to have gone through the experience and learned something.
i wanted to give AMD a shot since i never had an amd or ryzen computer before and i gave intel like over 25 years worth of money someone else's turn. However yeah there are some decent intel builds that are pretty cheap right now because no one is buying them so they dropped the price to make it look attractive.
i remember when ryzen 2 launch and my friend wanted to built a pc i recommend AMD, but he insist of going intel . now we see non tech person insisting to go AMD
lmao more amd fanboys acting like it makes such a difference. The majority of us are gamers and I hate to break it to ya but the last 3 gens of both intel and amd cpus are absolutely overkill for even the most demanding games. I love seeing the team red and team blue still as if it makes such a difference LOL
This girl is such a damn joy to watch, she is so so so contagious with her laughing and glee. Also, I feel Linus so much with how tense he feels watching the build.
Sarah is a gem. I love seeing videos with her trying to navigate the tech world, it gives me a lot of insight into how I could help newbies. Make a whole series of "Bringing Sarah Up To Speed" and you'll have a multi-part series on How To Build Your Own type thing. Guaranteed.
yeah, this video is meant to be for laughs and whatever, but this has really boosted my confidence for my first build coming up in a few days since i've been so worried about not knowing how to plug stuff in or whatever. If sarah can do it without looking it up or reading the manual, I'm pretty sure I can do it. Thanks LMG
I'm sure she had fun building it when she had no finances at stake, if I spend my savings on a pc and had no idea what I was doing, I'm not sure I'd describe the experience as fun 😂
Dude that's sooooo true. I recently built my first PC that I worked my ass off for so I was being freaking extra extra careful with everything and got stressed tf out during the process. It was definitely not as fun as I thought it would be.
Yeah it’s definitely different when it’s not your money. I’m terrified to build my own pc because I’m so stressed I’ll mess something up and waste lots of time and money so I just stick with prebuilt gaming laptops :p
@@cadmunn It's not that terrible, but it is VERY time consuming reading all the manuals and figuring things out by trial and error. The good news is it's actually pretty hard to break anything. I'd budget a couple days to getting everything put together, working, and installing all the os/software, and just take it slow and easy like you're figuring out a puzzle.
@@nguyenhuyminh4945 Man that's so true. I got a 5900x a few months ago and was installing an AIO and the bracket wouldn't fit on their properly so that was already stressing me out cause things were not lining up like the manual/video said they would so i said screw the bracket and just installed it no bracket, fired it up. ran some temps didnt like what i saw so decided to give bracket another try(the bracket worked it was user error) and the cpu and heatsink got stuck together. Was the most nerve wracking 30 mins i ever spent building a pc with a whole bottle of alcohol and some dental floss trying to finesse these things apart. Whole time worrying that i put too much pressure on the cpu cause it wasn't in the bracket and ima pull it out with bent pins and have to buy another one.
Sarah might not be super informed about this whole process, but her procedural self-talk shows that she is very intelligent. We asked for moar Anthony videos and got them. I want to see moar Sarah videos too, especially in her field of expertise!
Let's just say that I hope my son would be a good as she is, but I have my doubts. My wife wouldn't even know that a PC can be ordered in parts :) So yeah, it's actually pretty good.
The first time i installed a gpu i didn't wiggle it like that, i treated it like it was a crystal worth 1 billion dollars, she stress tested the SHIT out of those parts, holy shit, but yeah, did somewhat good.
Sarah: "I dont know what parts are fragile and what are not, So im just going to treat everything as fragile" Also Sarah: [violently shakes, wobbles, and forces everything]
@@SteveDice21 That, being on LTT Twitter, FB, and various other sites, as well as help coordinate events. She has a lot of work to do actually, given the kind of company LMG is. Honestly i think having just Madison on the job is too much for one girl, but so far she's on top of things.
Indeed. This whole industry is still 99% geek oriented. As.much standardization as there is, we are still many years away from anyone building a computer as easy as putting together a high end Hi-Fi system.
The case comes with a clear manual that would have avoided most of her problems, and the motherboard manual should have avoided the OS installation problems
It's actually quite satisfying watching Linus almost have a conniption while watching her mishandle parts not knowing what she's doing, like he carelessly handles parts with full knowledge of the processes.
That is the fucking difference here. Linus KNOWS how to handle things. He does not carelessly handles things. Shaking a Motherboard to check if parts fall out? Come on....that does not make sense even for someone who never built a PC.
As someone who learned basic PC building in highschool I agree that building a PC is something you should at least experience once. But the school's way of teaching PC building was flawed because we didn't really have specific parts... Instead of naming the parts by their actual names we just use their PC names. Instead of Intel i3 or what not we use CPU from the small box of CPUs, instead of ddr3 ram 1333 MHz we use the ram from a pile. It's nondescript and quite easy to understand. And as newbies we just didn't delve deeper into as we have a full schedule of other subjects. The gist of it is that it's like a Lego building when we handle PC building. From the basics of assembly to the harder parts of installing a os and drivers through the disk drive. Mixing and matching mobos CPU, hdd, and rams. To hell with compatibility if it fits it sits. It was a fun and satisfying subject. And watching the PC you built turn on and connect to a Lan network with other PC the other classmates built is gratifying. This was in my highschool before the internet was easily accessible.
This is a very interesting perspective, growing up with access to old towers deffinitly gives you an unquestionable advantage. I broke so many computers to get to where i am today. It was so easy to find xp machines people were just tossing them out when i was kid. I about fell over when that duck tape came out. I have tape holding my all in one hackintosh together rn lol and a 3ft rubberband keeping the front pannel and lcd connected to the housing...
It's still better than the verge guide
At least with this build guide there’s application of logic, learning, and good points brought up about how to improve things like labeling.
The fact that both this PC and the Verge PC POST just fine and mine didn't suggests I might be actually retarded.
@@Bloodster8 The verge pc build actually jump cut many times to things being installed correctly. This one was actually just built correctly, badly correct, but correct. :D
Anyone can say that
@@lelandbatey just marginally
Petition to have Sarah come in for any video that has a product or computer to shake them as a quality test.
Sarah the automated shaker test
@@jackwinter1507 dont reply to the bots you may have a chance of being hacked idk how or why but this happened to one of my friends
@@real_bork7858 Your friend probably clicked a link in the bot's comment by mistake. To my knowledge, there aren't any known exploits that enable an account to be stolen through replying to someone
@@real_bork7858 there is no way a bot can hack you from replying
Lmao yes please :D and then linus can drop test it :D
I think the scariest part was when Sarah wiggled the gpu up and down 😖
Sarah: *Wiggles GPU*
Linus: *Escalating cries of pure anguish watching this*
nah, doesnt do anything unless you MANHANDLE IT really bad
Nah, scariest was when she yanked the sticky cooler off the cpu. I have witnessed the destruction of bent pins in the past when people did that.
Just as tooth clenching when the SSD was held and swung by the SATA plug alone, and shaking the case upside down to see if the board wouldn't fall out. Why didn't she have an instruction booklet for the motherboard?
@@rafenwulf Still beter than the Verge.
Every time she wiggled that GPU, I was screaming insid- never mind I just got notified that I was screaming on the outside too
I was also screaming on the outside and got notified xDDD
I also got notified
I'm just laughing my ass off
Huge props to Sarah for being so willing to be the “person who doesn’t know computers” on a tech channel. She does a great job and is super charismatic. A+ job, you did better than I probably would have with the info you had!
She did a really great job! Linus should honor her way to build this with her little knowledge.
Yeah she is a fart smeller. If I wasn’t into pc’s, I would have done waaaay worse
She exudes “she doesn’t know what’s going on but has spirit” and I love it
Its in😏
"she a little confused but she got the spirit!"
that's the energy we need
I do love her energy here
We have a word for that. It's called moxie
She deserves a medal. She willingly walked into the Linus Man Cave and with good humour and enthusiasm, she took on the challenge as a novice. I enjoyed this video.
And I think she nailed it. Two little tips and the PC is running. Really awesome. This video could free a few people from the fear of building a pc yourself.
Sarah was pretty much how I felt when buying a PC but I didn't know partpicker existed.
RIP
without part picker id be a lost soul
Hey there, I totally get where you're coming from! Building your own PC can be a daunting task, especially if you're new to it. But trust me, with the right resources and assistance, it can also be an incredibly rewarding experience. Don't be discouraged! There are plenty of helpful guides and tech communities out there that can offer step-by-step instructions and recommendations. Feel free to ask any specific questions you have, and I'll do my best to provide valuable insights and assistance. Let's optimize your tech setup together! 💪🖥️
Honestly I never used part picker always google. Probably me being dumb but oh well. What works amazing as well is chatgpt. Not only does it tell you compatible parts it can also be asked parts that work well with others. For example what gpu works with ryzen 5 5600 and it’ll give you a list. Also building in general. If you’re new and have questions you don’t wanna waste time finding answers for on google chatgpt can help you pretty fast and explain any problems and fixes.
@@hlarjay7503same, I would have totally gotten a different sized motherboard than intended and a way larger AIO than it could possibly fit in my case 💀💀💀
Huge props to Sarah for this. Doing something you're not good/experienced at in front of a crowd of people (both in person and virtually) who are either very good or at least better than you takes huge stones. And to have such a fun attitude while doing it is really intoxicating to watch. More of Sarah, she's lovely!
Totally agree. I actually didn't expect to hear her say that she enjoyed it so much! It was really fun to watch, and it is making me even more excited to build my own! (Yes, I do have a gpu. :P)
Bless her precious soul
at least it looks like she had fun!
Yeah, she did a great job, in front of a crowd with cameras. Damn. Just don't shake everything so violently!!
Finally, somebody who uses common sense to figure out unfamiliar things
When she shook the case I thought the motherboard was coming out...
Same, it hurt me to watch.
Love the Cosmo avatar icon, btw.
holy shit me too because they didn't show us the part where she screwed it in
My heart skipped a beat!
@@krishg602 they always skip those boring parts
My heart stopped, I couldn't believe it. They for sure edited it so that we'd think that lol
*I never knew Linus having a stroke for 25 minutes was this good*
I wonder if Madison and Sarah working together would kill him.....
I feel like this is n opportunity to upload the video to pornhub with the title "Linus strokes for 25 minutes, with happy ending"
These new series are essentially linus reacts to his legacy.
just remember! most of this was scripted to happen!
Phrasing...
The best part of this was witnessing her gargantuan quantity of confidence despite being inexperienced. And then agreeing to have it filmed. One day I hope to worry this little while assembling a computer.
well to be fair its not her money she has to worry about lol. if she was paying for it im sure she would be nervous to not destroy anything.
Worry is very good when building a couple thousand dollar worth rig
Hey there! As a fellow tech enthusiast, I can understand the challenges of building your own PC. It's a complex process that requires expertise and experience. However, with the right guidance and resources, it can be a rewarding experience. If you're looking to optimize your desktop setup and extend the lifespan of your notebook, I highly recommend considering the HOTO Compressed Air Capsule. It offers powerful vacuuming and blowing capabilities, making it an essential tool for maintaining a spotless environment. It's compact, versatile, and has some great features that make it stand out. Check it out and see if it fits your needs! 🖥💨
Hey there, {{3}}! As a fellow tech enthusiast, I understand the importance of keeping our setups clean and maintaining optimal performance. Have you considered the HOTO Compressed Air Capsule? It offers powerful vacuuming and blowing capabilities, making it a versatile tool for keeping your desk, car, and other spaces spotless. It's reliable, reasonably priced, and offers excellent features like multiple tubes, high-quality filters, and efficient storage. Give it a look! 😉
The less you know, the more confident you are because you don't know how much you don't know.
I love how enthusiast she is about building something she has no knowledge about, while being surrounded with people that do that for a living and are silently judging her. Good spirit, good video !
All the time knowing how the UA-cam comments will REEEEEE at her.
I think it's an essential building block to learning. Humility 😂 I know I did when a friend got me to take apart my first PC and I put the CPU on top of a foam sponge while I took off the screws with a baby kitchen knife
My thoughts exactly - I really appreciate the "what not to do" style this video has and would totes watch more.
I think the horror in me is the fear that a lot of the PC master race will conclude because of one woman that women don't know technology or aren't well suited for the IT industry.
Her spirit, exactly!! And willingness to become the foil for the nerd brigade in the office.
"I'm just gonna be gentle with everything"
*vigorously shakes and whacks motherboard*
ua-cam.com/video/UBR9iDJybns/v-deo.html
[insert anime protagonist "go gentle" meme here]
wait until she grabs that gpu
the amount it bent made me cringe in a way i didnt know before
Well she learned from Linus
my heart.... can't take it....
Linus can't take it.
bruh literally disliked then undisliked after 😂
Same as mine
can't take it , door stuck
Anyone else having trouble breathing watching this?
I will not dog on sara, this is a PERFECT example of "Well I've never done this before I don't understand anything about it, let alone connection tolerances." That said, truly had me rolling at the GPU, the horror.
That thing with the 8 pins is fairly true though. It worked out kind of handy for me on an old Tesla card, it uses 8 pin cpu pinouts not pciE pinouts.
much better than the verge guy anyway...
@@Stand-as-One_Virox even so, if someone like sarah can break the connector loose, it's a bad design. Ignoring Laptops, these ISO connectors are also expected to be used on computer systems that while they may not be used while in motion, will be transported a lot, and subjected to stronger forces.
If someone like Sarah can cause a failure by shaking it, the manufacturer failed. These are consumer grade products, and shipping while assembled should be an expected stress on the product.
"I don't know what I need to be gentle with so I'm going to be gentle with everything" VIOLENTLY SHAKES AND DROPS AND WIGGLES EVERYTHING 😭😭😭 love her enthusiasm tho
There are worse samples see q0 whatever video.
look at 25:25... [drop tested, Linus approved]. She is the drop tester.
@@nihonkokusai what?
Now I want to see Linus trying to design a LTT store shirt from scratch, also while having 3 “hearts” and investigating by himself with Sarah reacting.
Edit: sell it as a limited run obv
I second this idea!
Might be a good idea on a more relevant channel.
Definitely seems like a good CSF video.
Fantastic idea!
I hope she's just as critical and snarky
I can't imagine the pressure of building a PC for the first time knowing Linus is watching your every move.
and you also worked there.👍
Or a 12k cinema camera watching your every move. Your mistakes have never been more detailed!
and that millions people online will see the video.
I wager I built my first pc before Linus... so.,,
Linus builds PCs standing up. Even with an overhead camera mount, so he has no excuse. If you saw anyone else doing it, you would laugh and say amateur. First step of working with the tower/case.. you lay it down. There's this thing.. it's called gravity.
It was WAY more stressful for Linus to watch than it was for her to build. My daughter built a computer with me standing there to answer questions. I did install the CPU cooler as she was not sure about that.
It's admirable that she's willing to go through this, I mean the internet can be cruel sometimes after all.
Definatly. Their are a lot of small (and huge) things that have to change for tech. TLDR,BLUF: Working with a verticle case just sucks ass, just about no room to get things in to it. Parts with cute sounding parketing names: no clear marking what several different looking slots are. Documentation that's utter ass, riddled with jargon that is tech heavy, and just not done for joe average to know which thing, does what. Just even upgrading a computer I was given as a stupid amazing present. tracing what wire goes to what was a un-needed headach, getting the god dam wires out of small slots, things to be reseated,. All the fucking QOL things these assholes refuse to do with very fragile, very expensive parts. Drives up the fucking wall! YOu have practically sacrfice someones soul just get the god damn thing to start and all the shit to phyiscally fit, wade through a fucking night mare of how to's with no fucking direct insuctructions For example: see this green slit/nob/.thingy/ Put in this other greenthing. And the parts might even available! it's fucking insane!
@@gorkskoal9315 PREACH brother 🙌
@@BurntFaceMan Have you been on the internet lately? Simps vs. Incels is the biggest war on the planet if you count out middle-eastern proxy wars
@@jesustyronechrist2330 I am confused what is middle eastern proxy wars?
At least she isn't on the Verge of failure. I'll see myself out.
I have faith in agent Sarah!
Yoo wassup, didn't expect you here. Big fan.
No pls don't
Sarah's pc is gunna died to fall damage now. Thanks stone
No
Damn. How are you here SM?
Her definition of “I’ll be gentle with everything” scares me.
👀
haha
“I’m scared of breaking things”
*proceeds to flail her motherboard with ram and cpu in it around*
RIP GPU
Same
I think it is unrealistic to expect anyone to go into this on their own. Everyone I know came to me if they wanted a computer, asking if I could help them, which I could.
She wasn't on her own, she had linus and most importantly google
If she actually thought about watching at the very least one video she would t have had this much trouble
Yeah man it’s true
I know that feeling I have been there for many many people but I love building pcs so I don't mind helping others.
@@guardiancreator same.
Meh, I did it on my own and everything turned out ok. Definitely scary and I definitely did more research than Sara seemed to but honestly after seeing this video I have a new respect for the durability of these parts.
Linus: She found the CPU, that's better than some of the ROG rig reboot contestants.
Maddison: BIG OOF.
My thoughts exactly
OUF*
@@bondjw07 OEUF*
@@matekovacs2696 œf
The amount of stress induced by this videos is immeasurable... but her elation after the fact was awesome.
This has been the hardest video for me to watch all year
I 💕 it
English ikr
This video gave me a headache just by watching
How did she get the ryzen 7 cooler
"I don't know what parts I have to be gentle with and what parts I have to be rough with. So I am going to be gentle with everything"
After this I was feeling less worried. UNTIL SHE PROCEEDED TO SHAKE ALMOST EVERY PART LIKE THEY OWED HER MONEY!!!
@@JimJamTalks Thanks Man
You should be gentle with all parts.
looking for this comment
The treatment of the gpu had me cringing so hard...
VE CUT OFF YOUR JOHNSON LEBOWSKI!
She would probably find it way less fun if she had actually purchased all of those components herself and would therefore have to take the loss if she had damaged anything. That's the only legitimately stressful part about building a pc as a total newbie. You've spent all of this money on components and now you have to assemble them all without screwing anything up. If you do, you're on the hook for replacing it. Something tells me she might have been a bit more cautious if that were the case
If she paid for the parts she wouldn't do half the shit she did specially what was done to the gpu
I always partially build some of my PCs myself, but I always was scared of damaging the CPU. But after doing a complete build, I realized that installing the CPU is probably the easiest part of the entire build xD
No, I don't think that's that. She wiggled the GPU (and other stuff) because she was worried that if it was not secured it wouldn't work or would create some problems (more than she was worried about the connectors). However, if she had to buy all these things herself, she wouldn't have gotten to the point of deciding whether or not to wiggle the GPU, because she wouldn't have done any of it to begin with - she'd have bought a pre-built computer, like 99% of those who buy a desktop do.
@@KEEYBLADE agreed haha. Installing the CPU is a weird process, but it's very straightforward and has basically zero room for failure, because either you do it right, or you can't do whatever you intended to do. If you have the common sense not to force the CPU into the socket, there's nothing that can go wrong, normally.
@@azaria_phd unfortunately common sense isn't really common...
"She found the CPU, that's better than some of the ROG Rig Reboot contestants"
[Madison will remember that]
I'm glad I wasn't the only one to catch that shade lmao
The first time I dealt with a 486 (PCI at that!) and I removed it for some reason, then I put it in backwards and turned it on. The CPU survived! The board was replaced under warranty.
I was 14 IIRC?
Having watched Madison’s ROG video like 4 times I can confidently point out that she did actually identify it on her own, and Linus was impressed 😛
I mean Madison had to watch LTT vids for her class
This action will have consiquences.
"I feel like at LMG, we just YOLO" - Sarah Nailed it!!!
Linus didn’t like that one
Butt she was good
Is Sarah a Light Machine Gun???
If it cant fit.. **grab a grinder** you'll make it fit..
I love how offended Linus was at that, even though he knows its true.
She did fine for somebody with no experience at all.
The fact she was able to look at the motherboard itself and figure out where to plug things in is better than anybody else I've ever tried helping personally.
Especially because from what I could see, because these things were from LTT’s warehouse, she probably didn’t have any of the manuals that might’ve helped.
she really should have had a i cant remember what its called but its a static strap that goes around your wrist and connects to the computer chassis to ground you and keep you from frying the computer.......its like training wheels for newbies
Even the RAM is seated properly...
@@weedthepeople2795 or you know... Just touch the PSU
@@marinmarinhola ya true for people that have been workin on computers for a while, that becomes second nature but not to newbies.....and you just need to be in physical contact with the chassis to be grounded, not just the PSU
Props to Sarah for being vulnerable. I know quite a bit about computers and yet I'm still not confident I could build my own PC without some amount of help.
Did you build your computer
Watching Linus freak out when she wacks things around and almost breaks them is so satisfying. He FINALLY knows how we feel.
so true!
I was thinking this the whole episode!
I think she basically roasted linus when she said "I've been watching the videos and it seems that's how they do things" - while banging the motherboard on the desk.... lol Linus this is your fault!
Loki: "YES! THAT'S HOW IT FEELS!"
"He FINALLY knows how we feel"... when we watch him build a pc LOL
She has done an amazing job thinking out loud and voicing exactly what the average Joe/Jane goes through when building a PC for the first time. Kudos!
Who's joe
(I'm sure u wanted someone to ask that)
@@KrishnaTejasVoruganti bruh
@@its_johnH just a joke dude
@@KrishnaTejasVoruganti come on man! You... you know the thing!
@@SnifferSock lol
I am just 9 seconds into the video and I already know that I want a Sarah vs. Madison build-off challenge.
This ^
Totally underrated comment!
Couldn’t agree more🤣💪👍👍
All in .... they should do this
Yeah!!! Make this happen!!!! :)
Props to Sarah. She did an amazing job, especially for a first timer. Combined with the pained looks from Linus when the "fit tests" were done, this was great fun. More please!
Amazing is probably not the right word to use here. She did a "successful job" at most lol
“we don’t yolo” -guy who made a solid gold controller
And built the best gaming pc
... and tried to convince his wife to keep it
And invested in gme
He literally yolo’d 30K on $GME, and he didn’t even realise
@@marcellkovacs5452 it was 50k.
And Linus can finally understand how we all feel when we watch him drop something.
Linus: *juggles 5 3090s*
Sara: I'm just going to be gentle with everything.
Also Sara: Shakes motherboard violently.
Stress testing xD
He mansplained the shit outta her.
@The13thRonin Did you even watch the video? Whole thing was just him cringing at her. That's not even a word anyhow.
@The13thRonin Women invented that word. Take it up with them. Seriously you didn't even watch the vid and still thought to comment. There's your cringe. Ok enjoy your block.
@@gorginhanson this comment is full of cringe
This is the most informative PC build video on the internet for a beginner. Having someone mirror all my uninformed thoughts and then an expert rim them point by point is so helpful
"I don't know what I need to be gentle with, so I'm going to be gentle with everything."
*is gentle with nothing*
still gentler then linus.
at least she didn't drop anything
just like Dumbledore speaks calmly
Me making a guest appearance at 16:44 👀👀👀
Just trying to help Agent Sarah on her journey, but we definitely don't recommend duct tape for mounting a SATA SSD.
Well done sir!
You made Agent Sarah accomplish wonders !
that duct tape advice was on point, sir 👌
Time to start up your own company and buy out LMG.
I think she needed a what not to do video first
Damn man. Didn't expect to see you from the x360a days. SideDish120 here. Good to see you're still chugging along.
And now Linus knows how we feel whenever he picks up any power tool.
XD
Thank you for this :)
Damn not going to lie my heart was dropping down my chest watching this what type of person is spoiled enough to think they can treat delicate hardware and expensive items this way by forcing them in to each other and shaking each product to test if it is actually installed makes no sense her mentality is trash with no common sense would suck to her boyfriend 😂
@@johnpatrick5282 bad day?
@@johnpatrick5282 dafuck i want to see u do ur GFs makeup and see ur common sense. Its only common if u always do it if u never build a pc u litterally can’t know these things people tend to forget how the beginning was once they get more advanced or once te basics become second nature
Just binged this entire series and I have to say: Bravo Sarah
People are so afraid of doing things they aren't comfortable with regardless of the situation. Much less pushing forward in front of millions of viewers. Going in blind is tough, and uploading a video of you going through all of these pitfalls (especially in an industry historically caustic towards newbies) is so badass. Very cool
tbh there were no consequences for fucking up here. irl there's usually consequences, which is why most people are afraid of doing things they aren't comfortable with.
Yeah, she had a team of very supportive people behind her and was definitely building a PC with not her money.
I was referring specifically to the act of uploading a video where she is engaged in an activity that she is hilariously and frightfully unpracticed at. I know that I would be too scared of the potential shame I would get from the tech community to publicize my unwitting errors
She actually did really well for someone who has no idea what they're doing. I think there's a lot of people that would be much more confused
She did very well, we just have to remember how Liao went...
A lot better than I was expecting, I've seen more people fucks up parts on their first time building
Ya, everybody starts somewhere. For a first try, it could have gone catastrophically worse.
the only things that greatly hurt me were how she kept shaking everything, and how she didn’t read the manuals at all
She has several advantages, namely that she say through secret shopper and at least *knows* what parts there are in a computer... My boss wanted me to write up a purchase list to build a new PC on the office to edit 8K video from an Insta360 Pro 2. He was horrified at the list I presented at the end and was convinced I was trying to rip him off. It took 2 hours of explanation just to get him off my back, he was asking why we needed a 'gaming' system and why can't we buy a normal one. We haven't gotten that PC in 2 months.
Sarah's husband : are the kids ok?
Sarah(shakes the kids upside down): i think yes
this comment has me rolling
Lol
LMAO! 😂😂👍👍
loool!!!
I was just about to write such a comment, wonderful!
Sarah: *SHAKES PC*
LINUS: "NOOOOOO"
Also Linus:"Oops, I dropped the GPU"
That was a dummy gpu.
@@TriggerzConnors Yeah...... Of course......
@@TriggerzConnors I hope he doesn't drop a RTX 4090 or a RX 7900 XTX"dummy".
@@el_de_el_loquendo9855 he will, don't you worry about it ^^ Linus should work at those facilities where they do those military grade drop testing.
@@marctestarossa True he is an expert, those GPU will survive.
I get that the point of this is to show an extreme example, but it's pretty misleading and a bit unfair to her. I started pretty blind but I definitely didn't pick my parts in one sitting and was watching a guide/referencing the manuals the whole way. Which is just... what you should do when you're not building a computer on camera with time constraints. I have to imagine her experience would be pretty different if she was doing this on her own time and didn't have a limit on asking questions. But even then, she figured it out!
Well, this is LTT. Their purpose is not to portray reality; it's to entertain their audience. Which makes the whole bit where Linus criticises companies for not making things easier for average consumers come across a bit... I don't know, a bit fake? Like they haven't earned the right to criticise anyone, because they intentionally made it harder than it should be?
Almost. I mean, he's not wrong either. I'm somewhat tech savvy, but stopped following PC hardware quite a while ago, and the current landscape is confusing even for me. An average consumer has no chance of making sense of all the confusing model numbers without doing a ton of research, and most of the information they'll find will fly right over their heads. It's just that, he makes it look like the true thing he says is a conclusion he draws from Sara's struggles. But most of her struggles were caused by the format they enforced on her.
@@EvenTheDogAgrees considering this is a follow-up to the secret shopper videos where the whole point is to just have a person with no knowledge on the subject buy a computer very quickly, it wouldn't make any sense to have her dedicate the time most people put into researching parts and the process. There are artificial restraints put on her but by no means are they unrealistic, and it does show that companies can do a better job explaining model numbers and things such as that for the average person.
"I'm not sure which parts are fragile and which parts are not so I'm just going to be gentle with everything." Proceeds to roughly handle every single part.
You should see her not beeing careful.
I think she just wanted to get it done with lol. Unless you're an enthusiast it can get frustrating real quick
@@dandyND when something doesnt work i get really fucking mad but still pet my pc afterwards rather than break it
At least she didn't hit anything with a hammer.
"Is this seriously Madison? Doesn't she have work to do?"
...Madison, Social Media Coordinator
i mean, work means helping the company to get bigger. And, if she is clicking on the forum many times, than its higher rated on Google, so LMG gets more reputation and more people get know to about it. Aint that much more work? So she is working for sure!
@@bigsmoke6414 Thanks Big Smoke, very cool!
@@bigsmoke6414 Big Smoke, we made Big Steak
Flushing Linus's money down toilet and flexing on the haters. LMAO
@@ivo215 You haven’t watched the whole thing yet, have you?
Bruh, I had a heart attack when she put the board in and shook it, since the screws being put in were cut from the video. Whoever edited that part out, you are evil.
^^ This ^^
Heart attack? Lol, calm down dude.
I literally cried out
@@Evan-hq5dt - Looks like we found the guy who DOESN'T build his own systems... LOL
probably Madison, if so I'd forgive her trolling
I just think about decades of development. The science. The engineering. The manufacturing precision. The technological achievement that is the modern computer. Then Sarah over here “shake, shake, bang, bang”
Sarah: "I'm going to be gentle with everything"
Also Sarah: EARTHQUAKE TEST *shakes cpu and ram*
If it can handle an earthquake, is it even a pc?
dont forget the pci flex testing
Well she nailed vibration testing, now we only have to teach her what leverage is.
She works at LMG after all
@@iamapant8142 almost all pcs can handle an earthquake. much more so than houses or other large structures. my laptop for example can survive being flipped 720 degrees and landing on a pillow, can your house do that?
Anthony and Sarah demonstrate perfectly what this channel is about: The full spectrum of PC-nerdiness encompassed in these two.
yin and yang lmao
THIS
Best description of this channel I’ve read.
@@Omonarc To be honest, though, there's really bugger all difference installing Windows and installing Linux. Write the ISO you download from their website onto a thumb drive, plug it in, turn on the PC (and maybe fiddle with the BIOS settings to get the boot order right, if it ain't already going to the USB before the hard drive).
As for configuring Linux, unless there's an actual problem that needs fixing, I'd simply say "don't". Get a friendly distro and just go with the defaults. Use it exactly as you would use Windows, with the GUI, and don't unnecessarily mess with anything.
Then, honestly, it's no different to Windows. I know this because, to save it from the garbage, I installed Ubuntu on a netbook for my mother, who's in her 80s now, and - absolutely genuinely, no word of a lie - I get vastly less calls for "tech support" from her for the Ubuntu netbook than I do for her Windows 10 laptop (and she uses the netbook more often, as it's more portable for using casually in the living room, while the Windows 10 laptop kind of stays where it is, as it's hooked up to a printer - and, in fairness to Windows 10, most of her calls for "tech support" from me usually relate to the bloody printer not working).
Seriously, first time that I installed Linux, I was messing around with the configuration in all directions. Trying to maximise and tweak and customise everything, and upgrade everything to the "bleeding edge". And I made it horribly unstable. So I re-installed it and then left well alone.
In a sense, this is the thing people coming from Windows need to appreciate. Open source works differently. Because it's open source then, yes, I am able to re-configure absolutely everything - hey, I could even crack out the source code and alter the kernel directly, if I really wanted to - as nothing is secret or hidden in the entire system.
And, yes, you can get carried away with that. Because, on Windows, I can't really do anything, so being allowed to tweak and customise and configure it all can be an intoxicating freedom.
But, honestly, unless you have good reason and know what you're doing, then simply don't. Just don't.
Despite what Aperture Science might say, you don't have to do it, just because you can.
Oh, and open source affects how you should look at software. With Windows, you get a new release and you instantly rush to install the latest version. But, with open source, the software is permanently released - if you really want, you can download those "nightly builds" and literally have the software as it was last night - so, actually, curb your enthusiasm a little. Unless you have reason - like you want to join in with testing and development or something - then just grab the version labelled "stable" or "LTS".
You don't want the "bleeding edge" of the "nightly build" because that's the software still in a state of development. It's unstable and in flux. The hatches have not been battened down yet.
Basically, if you treat Linux like you treat Windows - with Windows, you can't make many modifications so, in Linux, also don't try to do that - then it's no more difficult or problematic to use than Windows is.
The problem is that Linux provides freedom - and people instantly want to start messing with that and then start breaking things.
At work, I run a whole cluster of Linux servers and do all sorts of mad shit to make it work. But, at home, I mostly leave my Ubuntu alone and in its "out of the box" configuration. It works fine.
(But the great thing with Linux is that, well, I can get myself a Raspberry Pi 400 and then that's the machine that I can tinker with to my heart's content, not caring if I break it all. But this laptop is my daily driver, so even though configuring Linux is pretty much my day job, I leave well enough alone and it works perfectly.)
But this is understandable - as I say, initially, I did exactly the same thing. When you've been caught in Microsoft's "closed source" trap all your life, then to taste freedom can be intoxicating. All these configuration files and I can do whatever I want with them all. Awesome!
But, well, "with great power comes great responsibility". The responsibility of such freedom is knowing when you should and when you shouldn't exercise it.
@@klaxoncow You can make the same argument with MacOS and Windows. It's all relative. For me, Windows gives me the level of control I need over my computer without things getting too complicated. I know I would mess around with literally everything if I used Linux and ruin it. And I've used MacOS enough times to be disgusted at how it treats me like a child. 🤷🏻♂️
At least Sarah's PC is confirmed to be earthquake proof.
As a licensed insurance broker authorized to operate in BC, I can confirm that Sarah's PC's earthquake proof test is very relevant.
This gave me some confidence to build my own computer, and I really love Sarah's optimism through it all and at the end! I have my parts picked out (took me two weeks to pick...) and I think I'll have a lot of fun putting stuff together and even troubleshooting. I've fixed laptops a ton before, so I don't imagine that this will be much harder
I hope...
I'm from the future. How’d it go?
…did you shake your motherboard to check if it was secure?
@@iced_coffee_table Ha, it went fine! No issues at all, the computer runs fine. I haven't seen any temperatures over 55 C. I even pulled my old hard drives from my dead laptop and plugged them in too.
Okay there's one small issue. The case power button is in a prime spot for my cats to accidentally push it. So sometimes I think the computer has an issue and turned itself off, but every time it's been one of my two cats pushing the power button.
This was actually really educational. She does a good job explaining her thought process and problem-solving combined with your commentary (which wasn't too judgemental) actually provides useful scaffolding for those of us who might want to build a PC in the future. Thanks!
I very much agree. I think UA-cam started recommending this channel to me right after I built my PC (either related to Windows 11, building a PC in general or applying thermal paste, see below). If had seen this before building I would just have assembled everything instead of
1. Assemble everything and be happy.
2. Realise that thermal paste is a thing.
3. Buy thermal paste.
4. Spend a lot of time trying to figure out how you're supposed to apply it. Might be what led me to this channel in the first place.
5. Remove the CPU cooler (which was the hardest part to install in the first place).
6. Finally realise that there was thermal paste in there from the beginning...
"This is the way not to do it" is actually really helpful
Agreed although... As an experienced PC builder with 7 builds under my belt... Watching this was painful at times. I genuinely flinched when she put the motherboard in the case; thinking about how easy it would be to leave a standoff in the wrong place. I was also relieved when her attention to detail saved her from plugging the PCIE into the CPU power. Never done that myself but- I've seen plenty of horror stories of people learning that lesson the expensive way.
What she really needed was somebody to walk her through the process patiently... and explain on the small details like standoff placement, thermal paste application, grounding herself, PSU/CPU/PCIE/MOLEX/ETC power connectors and cable management(Because cable in CPU fan is bad). Also motherboards are surprisingly durable when just pushing things straight down... Excluding the tiny CPU pins- You'd be bending the motherboard under the kind of pressure you need to break a DIMM/PCIE slot... So should any common sense be in that Noggin; chances are that isn't how you'd break the PC.
agreed
dunno about the guys from the forums tho lmao
I gotta support Sarah's shake tests. I used to work at a company where we shipped PCs to customers, we called that the "UPS test". UPS/FedEx used to routinely do far worse to the systems we shipped out. We wanted to have some confidence that the systems would arrive intact.
I was thinking about this too. They have her be agent-Sarah - call technical support with supposedly all DIMMs needing to be reseated. And then Linus complains that she shakes thinks when building it to check things doesn't fall out?
But there is packing material specifically for that. And you don't want to enable bad method practice from end users, else they could/would be creating problems that they initially wouldn't have had.
Used to work for DHL.....NEVER write "Fragile" on a parcel.....You asking it to be "launched" across the warehouse!.... And yes people are that big an arsehole!
Half the time I do that because I dropped a screw into some odd corner.
if only ups was shaking the parts just as much as in this vid , but experience tells me when the gpu is laying in the case wit the slot still attached to the card and not to the motherboard , they are shaking it much harder (ow not to mention both screws to hold it in place were torn out and the holes they should screw in a little larger and popped inward) , and me a more experienced pc builder , still get screwed over by manuf. bu a motherboard with features listed , thinking ow this has adequate pci-e ports , and enough sata & m.2 onboard , buy it build it half the stuff not working,... mmmm ow they build in a switch you can use all the sata but only in combi with 1 m.2 , if using two m.2 you lose 4 sata ports , ow and if you use pci-e port 4 or 5 yeah the one m.2 is disabled anyway but you can use all the sata , right? nope , you could use pci-e 2 but not really cause its behind the gpu now so no acces, ah my prev mobo had 2x16x slots but this one only if you dont use any other pci-e port the pci-3 is a ... wait 8x port and pci-1 is also 8x when configured like that. (its not even wired for 16x, al the rest is only wired for 4x or 1x ) my 12year old (something like that) msi z77a gd65 had same pci-e gen and 3 fully wired 16x 6xsata +2xsata no m.2 but you could use all pci-e ports so a pcie8xto2x 4x m.2 fixed that nicely, and if the pcie switch used was software controlled so you could hot switch between stata or m.2 would be nice but its activated by wheter something is in the slots or ports or not
I can’t make fun of this. Sarah is me. I was Sarah. I asked for so much advice from friends thank god.
Exactly. We were all Sarahs at one point too. Waiting for my PC parts to arrive, I built up an encyclopedia of knowledge about PC building to make sure I don't fuck up lol. Also consulted tech forums about which parts to buy. Gotta say, it was extremely satisfying to have my build POST on the first try, without even testbenching it.
And then there's me... I think she SHOULD break it so she learns!
@@crylune I’m Sarah right now. Can you lend me some k n o w l e d g e ?
@@yungwallacebenson8381 LTT (this channel) has some great videos on how to build PCs, some long to cover the whole process and some short to cover specific tricky components, and there are loads of other guides and videos available all over the Internet. Just try to avoid marketing nonsense making you pay for things you don't need - like how Linus complained about overspending on the motherboard in this video, or how RAM above 2666MHz is pointless for Intel Core CPUs below i9 or without a K at the end (e.g. i5-10500K) as the CPU will limit the RAM speed.
PC Part Picker is a great resource for planning your build, though their database does lack some things and you should take their prices with a few pinches of salt as they just show the cheapest price found across a bunch of websites that may or may not be accurate or in stock - but it is great for compatibility notices and tuning your budget vs. expectations.
Also, while Linus is sceptical of the analogy, it really is like adult LEGO. Other than some PSU cables which could really be labelled more clearly, the sockets are totally different so you literally can't put a GPU in a RAM socket, for example, as it doesn't even look right at a glance. If a component doesn't line up with a socket, don't try to insert it.
Other than that, just treat all the parts with a lot more care than Sarah demonstrated in this video.
And remember: there are sites (like Overclockers and PC Specialist in the UK) where you configure a PC online as though you were building a spec list on PC Part Picker, but then they assemble it and test it for you. Yes you have to pay for the service, but it can be almost as flexible as DIY with the benefit of an experienced person assembling it and you get a warranty. It's a very comfy middle-ground between off-the-shelf PCs and DIY builds.
@@DanBennettUltra wow thanks for writing all this and sharing it
Wow this was tense to watch. Sarah being gentle with everything: shakes and wiggles each component
To be fair.... when she asked "shouldn't there be a manual in here?" the answer is YES!
Not providing one is setting her up for failure.
@Bruine Poep
Right.
They told her "take your time, watch plenty of UA-cam videos as you see fit because spending two hours on UA-cam and then knowing what to do makes for great sponsored entertainment!"
Maybe somebody didn't have the patience to re-pack things properly?
The least they could do is provide the parts as they would have arrived in the mail, including the frickin' manuals.
But it really isn't THAT big of a deal in the end, just an observation.
If there was a manual nobody would want to read it then.
@Bruine Poep dawg what do you mean. The manual especially for the motherboard is essential because they all have different architecture and positioning. At the very least everyone should have a mb and case manual.
@@reezuleanu1676 nah bro you need to read the mb manual unless you've worked with them before. Otherwise you're setting up for failure.
Linus likes to think of it as, "setting her up to make "content"" LUL🤣👌
Now I appreciate how gentle Linus was to every Computer part he's ever held.
except the parts he has dropped, which are many.
😂
@@patchworkkid24 Dropped and then kicked.
Its called sarcasm, Vicente ;)
Even the ones he dropped on the floor.
Sarah, mad props for having the courage to not only attempt this, but to do it on camera. You rock, and I hope you got a raise out of this.
It is way more stressfull when you do it with your own money tho.
@@Voxavs nah not really
@@Psychomalfoid It was for me. I have no shame in telling that I read the manual so carefully and watched so many videos and articles but still thought I needed the help of my bro.
@@mononokehime3182 I literally watched 1 video and it was so easy bruh
@@Psychomalfoid Well I didn't say it was difficult.
What a delightfully optimistic personality. Really fun to watch and I wish i had this attitude when I was started building.
“At LMG we don’t YOLO”
Y’all most definitely YOLO
What is YOLO
@@keanureeves9201 "you only live once"
*makes a golden xbox controller and has an onlyfans account*
"We don't YOLO"
@@keanureeves9201 an acronym for “you only live once”; basically the idea of just doing something without thinking it through
Sarah's random guessing is a better build guide than the Verge.
10 years from now we're still gonna be shitting on that verge video... And I'm all for it lol
Yeah they messed up ngl
Even Flex Tape can’t fix that!
LMAO
I'm guessing it's partly because she's surrounded by tech heads, while the verge guy was surrounded by knuckle heads who were as clueless as he was.....
"We don't YOLO?!?"
Your dremel tool would beg to differ
*Alex's dremel tool ;D
Dozen Dremels, worn out to death.
My first build took over 5 hours, I was wearing a static band and constantly discharging on the case and checking tutorials between every part. My last build took 30min from old and recycled parts I was eating pizza over it the whole time and chatting with friends on discord
my first took 7 hours cause I built in an itx case for my first build lmao 13L case with a non modular atx psu was a painful experience
@@dandyND My first (only) took 12 hours because my GPU didnt fit in my case and I was just extremely nervous in general with handling.
recently built mine for the first time. took like 5 hours as I was drinking and ran into a few problems lol
Same fr
haha nice i built my first in about 5 hours 2 extra hours because i hadent connected sata to my HD,
Second build 10hrs but fully custom watercooled baller waste of money :D
"I feel at LMG we just yolo" give her a raise, she knows the company moto. alolso I love her victory drop to the floor
Her first reflex was duct tape, she's basically as ressourceful as Linus
Honestly, I'm proud of Sarah. The attitude she had at the end of the build; she could have been one of those people that just focused on how much the struggle sucked but instead she focused on how rewarding it felt to have gone through the experience and learned something.
agreed it was definitely a delight to watch
Agreed, she seriously did really well all things considered!
Watching this makes me realize I was so lucky to have someone to watch and guide me while I built my first pc
"I don't know which parts I should be gentle with, so I'm gonna be gentle with everythig" *shakes everything violently*
Punches GPU.
She _gently_ shook everything violently.
I felt myself age like 1000 years after seeing everything going through a shake test
That’s what she said
@@piplup10203854 That GPU should okay, but I am now forever sus at that motherboard's PCI-e slot. it's... at least weakened.
Linus is dying this is great television 🤣🤣🤣🤣🤣🤣
If linus dies, at least lmg will still run the channel
@@nateh75 Anthony Tech Tips when?
@@H3LLGHA5T famous UA-camr "linus tech tips" dead by apparent drowning, no foul play found
Im convinced Shara was
trolling Linus 😅
Oh she knew he was watching 😂
He _is_ a dinosaur.
We need to see more of Sarah on camera. She's hilarious - i absolutely loved the latest undercover prebuilt series
Because
@F*СК MЕ - СНЕCK МY РR0FILЕ lol the bot is failing
isn't that how we got Maddison? XD
@@Skuplia lol istg they're still trying...
ua-cam.com/video/UBR9iDJybns/v-deo.html
She did a great job considering the situation, I hope she didn't get too much negative reactions. She even had fun with it!
Linus cringing when she shook the components like he hasn’t dropped half of them
facts
lmao
Linus is here like a dad trying to teach his kid how to drive. So tense. So stressful. I love this video!
Watching him going absolutely apoplectic is both amusing and is giving me sympathy chest pains.
I swear Linus was going to have an aneurysm...
Meanwhile him dropping components and devices has reached meme status.
At this point there's only one option: release for adoption
An opposite world where little Linus gets to do "play" time while bulding a Pc and Sarah watches nervously would also be enganging
"I don't want to go Intel"
Man it's a bad time to be Intel. Even non technical people know to go AMD lol.
i wanted to give AMD a shot since i never had an amd or ryzen computer before and i gave intel like over 25 years worth of money someone else's turn. However yeah there are some decent intel builds that are pretty cheap right now because no one is buying them so they dropped the price to make it look attractive.
i remember when ryzen 2 launch and my friend wanted to built a pc i recommend AMD, but he insist of going intel . now we see non tech person insisting to go AMD
just less than a decade ago, most non-tech people i've meet doesn't even know what's AMD.
11400 is best gaming cpu for price to performance
lmao more amd fanboys acting like it makes such a difference. The majority of us are gamers and I hate to break it to ya but the last 3 gens of both intel and amd cpus are absolutely overkill for even the most demanding games. I love seeing the team red and team blue still as if it makes such a difference LOL
This girl is such a damn joy to watch, she is so so so contagious with her laughing and glee. Also, I feel Linus so much with how tense he feels watching the build.
Sarah is a gem. I love seeing videos with her trying to navigate the tech world, it gives me a lot of insight into how I could help newbies. Make a whole series of "Bringing Sarah Up To Speed" and you'll have a multi-part series on How To Build Your Own type thing. Guaranteed.
"Bringing Sarah Up To Speed | Custom Water Cooling"
Now linus knows how we feel every time he drops something expensive.
Spot on...
Honestly Sarah did a really good job of problem solving in places where she didn't actually know the answer
yeah, this video is meant to be for laughs and whatever, but this has really boosted my confidence for my first build coming up in a few days since i've been so worried about not knowing how to plug stuff in or whatever. If sarah can do it without looking it up or reading the manual, I'm pretty sure I can do it. Thanks LMG
I'm sure she had fun building it when she had no finances at stake, if I spend my savings on a pc and had no idea what I was doing, I'm not sure I'd describe the experience as fun 😂
Dude that's sooooo true. I recently built my first PC that I worked my ass off for so I was being freaking extra extra careful with everything and got stressed tf out during the process. It was definitely not as fun as I thought it would be.
@Mission Complete first of all it does get easier and second of all how fun it is depends on what you find enjoyable
Yeah it’s definitely different when it’s not your money. I’m terrified to build my own pc because I’m so stressed I’ll mess something up and waste lots of time and money so I just stick with prebuilt gaming laptops :p
@@cadmunn It's not that terrible, but it is VERY time consuming reading all the manuals and figuring things out by trial and error. The good news is it's actually pretty hard to break anything. I'd budget a couple days to getting everything put together, working, and installing all the os/software, and just take it slow and easy like you're figuring out a puzzle.
@@nguyenhuyminh4945 Man that's so true. I got a 5900x a few months ago and was installing an AIO and the bracket wouldn't fit on their properly so that was already stressing me out cause things were not lining up like the manual/video said they would so i said screw the bracket and just installed it no bracket, fired it up. ran some temps didnt like what i saw so decided to give bracket another try(the bracket worked it was user error) and the cpu and heatsink got stuck together. Was the most nerve wracking 30 mins i ever spent building a pc with a whole bottle of alcohol and some dental floss trying to finesse these things apart. Whole time worrying that i put too much pressure on the cpu cause it wasn't in the bracket and ima pull it out with bent pins and have to buy another one.
Sarah might not be super informed about this whole process, but her procedural self-talk shows that she is very intelligent. We asked for moar Anthony videos and got them. I want to see moar Sarah videos too, especially in her field of expertise!
This
Omg yeeesss
Agreed
Definitely agree with you. You're a teacher or an aspiring one I'm guessing?
Yes, more Sarah please.
I dunno, I think I am really enjoying videos with her not in her field of expertise too.
Considering she had never done this before and had no manuals, I think she did good.
Let's just say that I hope my son would be a good as she is, but I have my doubts. My wife wouldn't even know that a PC can be ordered in parts :)
So yeah, it's actually pretty good.
The first time i installed a gpu i didn't wiggle it like that, i treated it like it was a crystal worth 1 billion dollars, she stress tested the SHIT out of those parts, holy shit, but yeah, did somewhat good.
PC Part Picker is a very good website to visit when building a computer. It'll let you know if parts are compatible or not
Sarah: "I dont know what parts are fragile and what are not, So im just going to treat everything as fragile"
Also Sarah: [violently shakes, wobbles, and forces everything]
I guess you don't want to see her not beeing gentle
When everything is fragile, nothing is fragile.
WE NEED WOMEN IN STEM!!!!!!!!!!!!!!!!!!!!!!!!
@@UltrafineDeluxe you called?
@@CristalianaIvor Must have forgot your number, you can go ahead & pass it along.
I felt that. Every "NO!" "STOP!" I felt each one.
I didn't. Linus really exaggerated.
@@HazewinDog Incorrect
@@HazewinDog He absolutely did not. I was one of the many gasping loudly and yelling “NO”.
I love his frustration towards Madison. "Is that really Madison? Doesn't she have work to do?" LMAO
Well, to be fair, she's the "social media coordinator" so I imagine monitoring the forum is kinda part of her job.
11:28 Linus throw some shade to Madison.
@@SteveDice21 That, being on LTT Twitter, FB, and various other sites, as well as help coordinate events. She has a lot of work to do actually, given the kind of company LMG is. Honestly i think having just Madison on the job is too much for one girl, but so far she's on top of things.
18:45 Wow, I'm impressed. Those front panel pins absolutely terrify me, even after building about a dozen or more computers.
“This video is proof that manufacturers can do a way, WAY better job at clarity for the average consumer.” YES..
Indeed. This whole industry is still 99% geek oriented. As.much standardization as there is, we are still many years away from anyone building a computer as easy as putting together a high end Hi-Fi system.
The case comes with a clear manual that would have avoided most of her problems, and the motherboard manual should have avoided the OS installation problems
@@Donni_10 I hope you are talking about Fahrenheit, or else...
It's actually quite satisfying watching Linus almost have a conniption while watching her mishandle parts not knowing what she's doing, like he carelessly handles parts with full knowledge of the processes.
Yeah, I feel like the Wheel of Karma has made a full turn and come back for Linus...
That is the fucking difference here. Linus KNOWS how to handle things. He does not carelessly handles things. Shaking a Motherboard to check if parts fall out? Come on....that does not make sense even for someone who never built a PC.
@@MsToshi1990 there's literally a clip of him flinging RAM out of a prebuilt machine onto the floor in the beginning lmao
See the difference is that she's ignorant, Linux is *willfully* ignorant.
I've learnt a new word this day; Conniption, thanks man.
"We don't yolo! What does that even mean?!"
The most boomer moment in Linus' history yet
Pretty much😂😂
I think he meant it didn't make sense in context.
As someone who learned basic PC building in highschool I agree that building a PC is something you should at least experience once. But the school's way of teaching PC building was flawed because we didn't really have specific parts... Instead of naming the parts by their actual names we just use their PC names. Instead of Intel i3 or what not we use CPU from the small box of CPUs, instead of ddr3 ram 1333 MHz we use the ram from a pile. It's nondescript and quite easy to understand. And as newbies we just didn't delve deeper into as we have a full schedule of other subjects.
The gist of it is that it's like a Lego building when we handle PC building. From the basics of assembly to the harder parts of installing a os and drivers through the disk drive.
Mixing and matching mobos CPU, hdd, and rams. To hell with compatibility if it fits it sits.
It was a fun and satisfying subject. And watching the PC you built turn on and connect to a Lan network with other PC the other classmates built is gratifying.
This was in my highschool before the internet was easily accessible.
Linus: "My work here is done."
Sarah: "But you haven't done anything."
Linus: **dramatic cape flutter**
Feels kinda sad that they deduced the first two points.
I know right. Like she lost two lives cause Linus walked in the door and literally did nothing.
If Anthony was just standing there Sarah wouldn't even need a lifeline. Anthony's magic is far stronger than Linus'.
I'd like to see an episode of the tech support face off that was Linus vs. Anthony :)
Anthony is like the embodiment of The Force for tech... He oozes midichlorians wherever he goes!!
Though he would've forced her to download some kind of Linux distro
Anthony could just look at the parts and they would auto build
As long as social distancing is in place, not for covid, get within 6 foot of him and your carrying his child
Sarah and Madison just make linus rage so easily. i love it
This is a very interesting perspective, growing up with access to old towers deffinitly gives you an unquestionable advantage. I broke so many computers to get to where i am today. It was so easy to find xp machines people were just tossing them out when i was kid. I about fell over when that duck tape came out. I have tape holding my all in one hackintosh together rn lol and a 3ft rubberband keeping the front pannel and lcd connected to the housing...
"Doesn't she have work to do?" Madison always walking on the thin line with Linus lmaooo
Her job is literally memes.
She got the job while walking that thin line
@@c0horst can’t argue with that
@@c0horst For this company, that is everything. We memed Linus into buying Gamestonks, after all.