Thank you for making these videos. My 2cents: I have ridden about 200km (mostly 2nd class roads and highway) with Hypepro front springs installed and must confirm that the improvement of bike stability (planted and sure footed) as well as the ability to absorb small bumps and fork dive (when braking) is on much higher level. Safer to ride and more fun due to a better feedback. Best upgrade for the money. Definitely recommended.
Thanks ! Yes although the suspension of the T7 is great it is always possible to improve it. How much is depending of the specific usage and of course wallet :-)
Hello good afternoon, it has to do with the wearing of center stand, upper fenders, lower fender, Sv motech skid plate, more givi trunk support,I know that all these things are a lot of weight, I have 7 cm in fork and 8.5 in sag shock, my weight with equipment is 85kg, greetings Toni from Alicante Spain, I love your videos, he explains it very clearly
The rear I have too much static sag, I carry the shock absorber of the T7 extrem, which I bought from a gentleman who took it off to leave the dealership, was brand new, the spring is two mm more than the stock one and it is harder than the previous one that was already 4 years old,
Thank you so much Sven for your explanations, very clear and useful. I am wondering about the 880mm seat height and 240mm ground clearance values given on the specs bike. When the sack is correctly set up, the bike moves down approx 60mm (30% of the suspension travel) with rider and gears on, that means to me that seat height becomes then approximatively 820mm and ground clearance 180mm. Is that correct ? Thank you very much in advance for your comments. Keep safe !
Hi and thanks for feedback. When sitting on the bike with all your gear it should sag about 30% (of 200 mm total suspension travel) same as 60mm. But when the seat height and ground clearance is measured the bike already has a 10% so called static sag if the suspension is adjusted correct. So it has already "sagged" 20 mm and will then sag 40 mm more. The seat height will then be 840 mm and the ground clearance 200 mm.
If I remember correctly you installed 85N spring (linear spring?). Can you accomodate a passenger (cca 60kg) and lets say 10 kg of luggage on this spring with your 90 kg? Or would you reccomend installing 90N spring? Thank you, keep up the good work.
Yes I installed the 85 Nm spring. As the setting for preload for correct sag is just 2 clicks I have 22 clicks left for luggage/pillion. I may compensate about 2,5 kg per click. Thats too little for 70 kg extra so I would go for 90Nm.
@@tubelesschannel yes i know that, but i'm asking in gains for you, since you are 90 kg, do you consider best option the 90 Nm? Considr you can ride with 15 kg luggage plus pilion? I'm abaut 98 kg, a few mates told that the 90Nm it's too much to solo ride...
I put all the clickers in factory recommended settings, then 2 clicks harder rear both on comp and rebound to compensate for my stiffer spring. I will try different setting when doing more offroad.
Hello Sven, thanks for this video! I just would like to ask you about he pre-load of the rear spring. The sag should be 60mm right? I measure the difference - bike stands straight both wheels on the ground vs. me fully geared sitting on the bike = 60mm sag. Is that correct? Many thanks 🙏
The "rider sag" should be about 30% of the total suspension travel (=60mm)...so you will have to measure the sag when the bike rear wheel is off ground (not resting on its own weight)...and the sag with you sitting on it fully geared.
@@tubelesschannel Got it! Just find out that the spring is too soft for me. I'm 90kg without gear and even after 24clicks from zero (max. pre-load) I still have about 65mm (with my riding gear on).. It means if I take a lot of luggage or passanger it would be even more. Maybe rally raid spring 85 or 80Nm would be the solution? Thank you 🙏
Jeg tror at for svært mange er det nok. Man kan bruke MYE penger på dette, men å få riktig sagg er viktig. Jeg solgte min T7 før jeg fikk montert spacerne. Men jeg hadde nok ikke gjort mere enn det.
He is like 90kg with riding gear and changed the spring! I’m like 110 butt naked! Have crash bar and rear rack! So i guesse i really need to change that spring!
Thank you for making these videos. My 2cents: I have ridden about 200km (mostly 2nd class roads and highway) with Hypepro front springs installed and must confirm that the improvement of bike stability (planted and sure footed) as well as the ability to absorb small bumps and fork dive (when braking) is on much higher level. Safer to ride and more fun due to a better feedback. Best upgrade for the money. Definitely recommended.
Thanks ! Yes although the suspension of the T7 is great it is always possible to improve it. How much is depending of the specific usage and of course wallet :-)
Just done mine, thanks for making it so clear to follow,
Glad to hear it was useful for you. Thanks for feedback.
Hello good afternoon, it has to do with the wearing of center stand, upper fenders, lower fender, Sv motech skid plate, more givi trunk support,I know that all these things are a lot of weight, I have 7 cm in fork and 8.5 in sag shock, my weight with equipment is 85kg, greetings Toni from Alicante Spain, I love your videos, he explains it very clearly
The rear I have too much static sag, I carry the shock absorber of the T7 extrem, which I bought from a gentleman who took it off to leave the dealership, was brand new, the spring is two mm more than the stock one and it is harder than the previous one that was already 4 years old,
Thanks a lot for watching :-)
Thanks Sven. As always, excellent information and nice and clear.
Thanks :-)
Thank you Sven the Geek. Finally I know something about suspension 😁
Thanks for watching :-)
Thank's professor Olsen!👍🏻
Doctor ;.) Thanks for watching !
Excellent explanation on how to regulate the suspensions, very useful, thanks a lot Sven !!! 🔝🔝🔝
Thanks for watching :-)
Good video.
Thinking about changing headers and air filter?
No I don't feel any need for more power :-)
@@tubelesschannel I think like you, and its a lot of trouble....but sometimes Im tempted for titanium headers....
@@JorgeCM75 if it gives substantial less weight I would consider it.
Excellent ! Many thanks for your very clear explanation.
Thanks for watching !
Another great video with useful information, I am only sorry you got rid of the T7.
Hi, pls can you tell me where did u found that shirt?! It is amazing!
I think you will find it at eBay, just search for Yamaha jersey. I dont have the link here now.
Thank you so much Sven for your explanations, very clear and useful. I am wondering about the 880mm seat height and 240mm ground clearance values given on the specs bike. When the sack is correctly set up, the bike moves down approx 60mm (30% of the suspension travel) with rider and gears on, that means to me that seat height becomes then approximatively 820mm and ground clearance 180mm. Is that correct ? Thank you very much in advance for your comments. Keep safe !
Hi and thanks for feedback. When sitting on the bike with all your gear it should sag about 30% (of 200 mm total suspension travel) same as 60mm. But when the seat height and ground clearance is measured the bike already has a 10% so called static sag if the suspension is adjusted correct. So it has already "sagged" 20 mm and will then sag 40 mm more. The seat height will then be 840 mm and the ground clearance 200 mm.
so funny, when i hear that scandinavian accent I think of all the scandinavian rally and f1 champions and i'll just buy anything you say
:o))
haha :-D
Nicely done sven, is that the karmsund bridge behind you.
Thats correct :-)
Excelent vídeo👍. Thank you very much Sven!
Thanks for watching !
great video, very useful and easy to understand, i very much appreciate it
Love to hear it was useful for you !
If I remember correctly you installed 85N spring (linear spring?). Can you accomodate a passenger (cca 60kg) and lets say 10 kg of luggage on this spring with your 90 kg? Or would you reccomend installing 90N spring? Thank you, keep up the good work.
Yes I installed the 85 Nm spring. As the setting for preload for correct sag is just 2 clicks I have 22 clicks left for luggage/pillion. I may compensate about 2,5 kg per click. Thats too little for 70 kg extra so I would go for 90Nm.
@@tubelesschannel whats the difference between the 85 and 90?
@@miguelgomes5783 it is the stiffness (spring rate)
@@tubelesschannel yes i know that, but i'm asking in gains for you, since you are 90 kg, do you consider best option the 90 Nm? Considr you can ride with 15 kg luggage plus pilion? I'm abaut 98 kg, a few mates told that the 90Nm it's too much to solo ride...
@@miguelgomes5783 ahh sorry...I bought the 85 Nm spring...I could probably also use a 90Nm and I think with your weight that's a better option...
Very Nice info. 🤜🤛
Thanks !
Hi Sven, could you recommend compression and rebound settings for on and off-road?
I put all the clickers in factory recommended settings, then 2 clicks harder rear both on comp and rebound to compensate for my stiffer spring. I will try different setting when doing more offroad.
4 click softer for me.
Hello Sven, thanks for this video! I just would like to ask you about he pre-load of the rear spring. The sag should be 60mm right? I measure the difference - bike stands straight both wheels on the ground vs. me fully geared sitting on the bike = 60mm sag. Is that correct? Many thanks 🙏
The "rider sag" should be about 30% of the total suspension travel (=60mm)...so you will have to measure the sag when the bike rear wheel is off ground (not resting on its own weight)...and the sag with you sitting on it fully geared.
@@tubelesschannel Got it! Just find out that the spring is too soft for me. I'm 90kg without gear and even after 24clicks from zero (max. pre-load) I still have about 65mm (with my riding gear on).. It means if I take a lot of luggage or passanger it would be even more. Maybe rally raid spring 85 or 80Nm would be the solution? Thank you 🙏
Er det spacers forran og ny fjær bak fra rallyraid som er mest bang for the buck?
Jeg tror at for svært mange er det nok. Man kan bruke MYE penger på dette, men å få riktig sagg er viktig. Jeg solgte min T7 før jeg fikk montert spacerne. Men jeg hadde nok ikke gjort mere enn det.
Kunne du lagt med en link tin 90N fjær?😀
Velg 90Nm her: www.rally-raidproducts.co.uk/yamaha-t7-tenere/yamaha-t7-tenere-shock-spring-uprated-stiffer-heavier
@@tubelesschannel Takk for tipset. Fjær er allerede kommet i posten👍🏼
Thank you!
Thanks for watching !
He is like 90kg with riding gear and changed the spring!
I’m like 110 butt naked! Have crash bar and rear rack!
So i guesse i really need to change that spring!