TBS Crossfire Ecosystem! How To Make Them All Communicate With Each Other! Crossfire WiFi/TBS Cloud
Вставка
- Опубліковано 8 жов 2024
- Did you know TBS Crossfire is designed to communicate to all of it's components! You can set it up, to when you change channels on your quadcopter or in your goggles the other devices will just follow! This is just the beginning of what Crossfire is beginning to implement! Learn how to do it all step by step in this video!
Don't forget to check out my entire Crossfire Playlist:
• How To Crossfire
Here is the Firmware Download link:
www.team-blacks...
Here is the website for XF WiFi:
192.168.4.1
In this video I show where/how to download TBS Agent X:
• How To Set Up The ALL ...
How to Mod your Goggles for more power:
• Fatshark MOD for Rapid...
JR Adapter Needed For Crossfire TX (Sometimes):
If your unsure, open the module and look for the WiFi components
amzn.to/32o98WD
===▶️ / drainmanfpv
▶️MyFPV Slidez:
✔️www.myfpvstore...
▶️Blue Loctite:
✔️amzn.to/3fB0lqL
▶️When A Motor Rips Off:
✔️ • What Would You Do If T...
▶️How To Set Up LED's
✔️ • Betaflight LED's !! Ev...
▶️ES121 Electric Driver:
✔️ • ES121 Electric Screw D...
▶️If You Want The Beast by iFlight:
✔️amzn.to/354KxqW
✔️www.myfpvstore...
▶️iFlight Beast Review!
✔️ • Why Wouldn't You Use T...
▶️iFlight Beast Build & Flight Video!
✔️ • Let's Build The H7 Bea...
▶️Crossfire Nano SE:
✔️www.myfpvstore...
▶️Unify Pro 32 HV:
✔️www.myfpvstore...
▶️Caddx Air Unit for DJI
✔️www.myfpvstore...
▶️Custom DrainMan Motors!
✔️www.myfpvstore...
▶️Smoke Stoppers:
✔️amzn.to/3tsWhhq
✔️amzn.to/2YL7trB
✔️amzn.to/3tsMt77
✔️www.myfpvstore...
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
/ drainmanfpv
/ drainmanfpv
▶️If you want to learn about LED's:
✔️ • Betaflight LED's !! Ev...
====▶️My Scope:
✔️amzn.to/2Y7NUtc
====▶️Cheap Version:
✔️amzn.to/2PC8Ogj
▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2 Day Shipping)
amzn.to/2PjqUDi
✔️or
✔️www.myfpvstore...
▶️How To Taranis:
✔️ • How To Frsky Taranis
▶️My Electronic Screwdriver:
✔️ • ES121 Electric Screw D...
▶️My Soldering Iron:
✔️amzn.to/2Oj95XS
▶️My Soldering Iron Tips:
✔️amzn.to/39IT453
and
✔️amzn.to/2Oj7r8C
▶️1.5mm Driver:
✔️amzn.to/3txYarX
▶️Radio Receivers:
✔️www.myfpvstore...
▶️Hobbywing:
✔️www.myfpvstore...
or
✔️amzn.to/31e6jFM
▶️Loctite:
✔️amzn.to/39QY5HE
▶️Screw Pack:
✔️amzn.to/2BPzBSq
====▶️How To Set Up A Throttle Cap: (Become A Better Pilot)
✔️ • The Ultimate Throttle ...
====▶️My Go To Pack:
✔️4s : www.myfpvstore...
✔️6s : www.myfpvstore...
====▶️Flight Controllers:
✔️www.myfpvstore...
====▶️ Quadcopter Frames:
✔️www.myfpvstore...
====▶️ The Goggles I use:
✔️amzn.to/3sQ5ksu (Comes w/ 2 Modules)
✔️Analog - www.myfpvstore...
====▶️My Radio:
✔️amzn.to/3sU9Fem
✔️Non-DJI: amzn.to/39dqI3c
✔️HD - amzn.to/2AVAEQo
====▶️ Video Module That I use (When Using Analog):
✔️ www.myfpvstore...
====▶️Bench Power Supply:
✔️amzn.to/3cpIOhE
====▶️Field Bag:
✔️www.myfpvstore...
or
✔️amzn.to/2TleAns
or
Ethix:✔️www.myfpvstore...
====▶️My 3D Printer:
✔️shop.prusa3d.c...
====▶️My Camera Used:
✔️amzn.to/2wX0eCg
====▶️My Cam Mic:
✔️amzn.to/3b2ZoUZ
====▶️Contact Me: @DrainManFPV on FB or DrainManFPV@gmail.com
====▶️I'Gizzle: / drainmanfpv
====▶️ / drainmanfpv
#TBS #Crossfire #WiFi
![✔ Готов улететь на 100км? Лучшая дальнобойная LRS система! Обзор + Настройка [TBS Crossfire]](http://i.ytimg.com/vi/EpXi0U0zsBQ/mqdefault.jpg)
![✔ Готов улететь на 100км? Лучшая дальнобойная LRS система! Обзор + Настройка [TBS Crossfire]](/img/tr.png)
Hey DrainMan, I just wanted to give you a shout and say THANKS VERY MUCH, I’m new to fpv and accidentally caught your video on updating to 4.2. I actually watched on my t.v. so I couldn’t type my comment on it without doing a bunch of stuff. I’m really happy the way you explain all the steps, as a beginner that’s the way we learn. Just wanted to say that I appreciate what and how your doing it.👍
Hi Drainman from Tim in Australia keep up the good work mate your'e a legend mate.
I’ve watched every video about tbs cloud and for multi bind and u are the only one that had all the proper necessary steps. Even bardwell lucked out when he got his to work and missed a ton of steps and was no help at all.
this wouldn't be an issue if everyone in the FPV space actually wrote complete product documentation. It's crazy! Nothing is fully or properly documented that I have seen so far. Madness.
@@jotham123 Most hobbies are like that tho.
@@nyclassic4ever130 maybe my expectations are wrong but working in engineering I expect engineered products to have proper specs.
I'm following your steps for this but when I go to 192.168.4.1 the XF Wifi page comes up wanting a web login which I have no idea what this is, please advise. THANKS
Wait.. all of that just to automate VTX channel configuration? Please tell me there’s more incentive then that. 🤪
Fantastic! All set up here now :D Thanks man.
thanks for the video . I have been trying all day to figure out why i can`t see the "XF wifi" in my agent X . I know it is something i am missing but I can not find any videos on the problem
Man I just watched this video for the second time. I’m wondering if you are still rockin the fusion? I have crossfire on my quads and I’m considering a fusion. So my question is how do you like the reception you get with it? Great work on the video and the other work you put into your channel making content like this.
Thank you for the Video! It was better described than the Video from Bardwell, LOL
In theory, sounds good, it just seems like a cluster F*ck.
It is i got all exited about it a while back then flogged my fusion and went straight back to the king. Rapid fire.
Acute description... cluster fuck sounds exactly right. Whatever happened to a turn-on button?
So I'm trying to connect my crossfire micro tx v2 to inav mission planner app, on my radiomaster tx16s it shows my android phones hotspot when I click connect it just says connecting but it never does, it also says wifi module is updated I've been 2 days on this still no joy, any ideas? Thanks for video
I GUESS NO ONE HOME
Dude I’ve been missing out !!!
ah now i know what tbs cloud is for.
But can you change vtx channel in flight?
Maybe not on a quad, but on a wing?
Got it all set up tx.... the only thing... i do not see the vtx in my crsf menu...all wires are correctly soldered, the channel on the nano rx are set up properly... help !
hey good video.. so if i have the TX module connected to the TBS cloud does the TX & receiver automatically update to the latest firmware or do i have to go into the TBS cloud module on the radio and then physically update the firmware? im guessing i have to connect as well to my WIFI in the house as well? sorry im a bit confused. thanks
You missed the part about the full size TX not having USB...
Great step by step ;-) keep it up!
Thanks drainman!
That micro tx update gives you up to 1watt RF power
When I connect to crossfire wifi, it asks for a "web login" password?? What is that?
After completing all these steps, does my Tracer and Fusion module need to be connected to my mobile hotspot in order to have them communicate with each other? I am trying to use the MyVTX follow feature and it's not working.
If you updated to 4.0 you unlock 1w on your micro tx v2
Will the vtx forwarding with fusion only work with the phone hotspot on?
So I have a very weird case that I don’t think I can yet do this switchover yet. See I have a grandfathered plan through Att that doesn’t allow personal hotspot. So at my field if I need to have a WiFi connection I’m screwed until the app launches.
Hey man, I’m not trying to call you out AT ALL. The reason I am saying this is that I have invested in ALL of this gear( Tango 2, Full TX, Fusion, plenty of Pro32s and HV) all the get as much as possible out of the analog world. I did ever single update that you did, and was able to connect my computer to all or the devices WiFi access points, but never the individual devices to a “network” It looked like you got as far as I did. On you screens, it never said that you were CONNECTED, it said CONNECTING...big difference. And when you went to verify, it had the little “xxxxx” meaning put in a password and hit the “CONNECT” button below. I never saw anything that said you were “connected” to an internet access point. Were you actually able to use any of the features, because I cannot. I got JUST as far as you did. I can connect my computer to each of devices, but not all of the devices to the same network at the same time. I want to figure this out. That is why I’m pointing all of this out. I have spent hours and hours on this. Updating all of it was strange, but not hard. Just go back and verify that you are “CONNECTED”, because I only saw “CONNECTING”. Again, just trying to figure it out myself. Thanks, and sorry for the rambling.
m.facebook.com/story.php?story_fbid=661943728073279&id=100027729740102
Hey check your password if it's too long the radio wont recognize it had similar problems till I changed the password to less characters then everything worked
Being wifi, wont it interfere with the 5.8ghz video signal?
I tried it and it just takes to long to connect betaflight osd vtx is many many times faster so much so i went straight back to rapid fire. Now show fusion menu waiting to connect trough microtx to your drone so you can actually use this eco system. For me this is when it falls on its arse it takes to long. Aint no one got time for that when rippage is at hand man. Appart from that tbs gear rocks
At 7:04 of your video I can not get this page to come up,mine comes up saying web login what ever that means and it won't except any password I have, I need page with update opinion like in your video, what am I missing here? Any help will be appreciated
I have all devices talking and micro tx and nano receiver appear in the fusion module display with their menu options available but I can not get videos channels to synchronise. Is there something I need to do in betaflight, remove the vtx table or remove smartaudeo?
I followed this step by step and when it was rebooting it failed and now wifi is completely disappeared from agent lite and wont connect
Sometimes I have a 1 min delay on my tango 2 before it goes green and will fly . also cant turtle unless 30ft away wont go green.
Wish tbs announced crossfire tx nano sooner
Hey drainman i got a crossfire micro v2 module and im having trouble connecting it to my computer to update firmware. Ive tried different cables different pc with no luck. But could i update firmware if i go the WIFI route?
Does it work with the tbs mpm (multiprotocol module)?
Thanks for the vid. Does this work with the V1 Micro tx also or just the V2?
Thanks Airborne, it works with both
@@DrainManFPV Cool, thank you!
@@DrainManFPV
Hey bud. I need help.
I have fusion setup, evo, T2 and they're not communicating. Anyway you can message me and help?
I spent quite a while doing all of this. Updating everything, power mod, troubleshooting. All I got for my effort was scrolling horizontal lines with wifi on. I also got an additional absolutely no benefit.
Thanks dude
I'm not taking advantage of it because every time I upgrade the firmware on my Crossfire it screws everything up and nothing talks to anything any more. Never again. The firmware can stay right and whatever old crusty version it is at now until TBS fixes their stupid s**t.
I've watched all the videos. I've made all the connections and I'll be damned if 1/2 the time things work and the other half it's just all f**ked up.
My setup
Tango 2 (updated) : Agent X Lite v.9
Pro32 Nano VTX
Nano RX
TBS Fusion
So I've had all this setup and running and talking to each other no problems.
Nano RX -> Pro32 Nano (CRSF TX/RX)
TBS Fusion Wfi -> Tango 2
I was hoping to control everything though my Fusion OSD, but 1/2 the time I'm either not getting connected to the Tango 2; Tango 2 sees nano rx and pro32 nano, or it sees it but lags really bad in controlling everything through CRSF. Sometimes changes take sometimes they don't. When it works it works decently ok. I'm about fed up with the time I've wasted on getting all this talking and ready to just go back to using Smartaudio through betaflight and ditching TBS Cloud all together.
great freeking video thank u very much .
Thank you 👍👍🙏
🔥🔥🔥
Man I wanna rip that beast hanging on the wall behind you lol. Maybe one day I'll win the lottery lmao 😂
I've watched all the videos. I've made all the connections and I'll be damned if 1/2 the time things work and the other half it's just all f**ked up.
My setup
Tango 2 (updated) : Agent X Lite v.9
Pro32 Nano VTX
Nano RX
TBS Fusion
So I've had all this setup and running and talking to each other no problems.
Nano RX -> Pro32 Nano (CRSF TX/RX)
TBS Fusion Wfi -> Tango 2
I was hoping to control everything though my Fusion OSD, but 1/2 the time I'm either not getting connected to the Tango 2; Tango 2 sees nano rx and pro32 nano, or it sees it but lags really bad in controlling everything through CRSF. Sometimes changes take sometimes they don't. When it works it works decently ok. I'm about fed up with the time I've wasted on getting all this talking and ready to just go back to using Smartaudio through betaflight and ditching TBS Cloud all together.
Got any advice?
Everything correct except the last step, the server verification, I only get offline 3
Eh… a lot of work just to change the channel on your fpv goggles.. Don’t get me wrong I am a TBS fan… I just think it’s alot of work for a small benefit. If they could make all the modules (vtx, Tx, Rx, fusion) talk with out cloud/computer/cellphone input that would be the way to go.
hmm turns on his computer.... wonder what he was doing on incognito
Well the bloody thing can’t see my mobile phones with there hot spots on , been trying for hours 😡😡😡
I was having that problem. Try moving your phone to another room. It worked for me. Reboot everything too.
@@robtomben thanks I will try that
No wonder TBS doesn’t say anything about this, it’s too easy to perform.
I think I lost brain cells watching this. No explanation of why anything is being done.
Fucks sake