Thanks for the video. How do I tell how long the power was out for when I return home and see that the power went out? When I flip through the screens on my APC UPS I see a screen that says Event 30. Does this mean the power was out for 30 minutes? I can’t find info on this anywhere surprisingly. Thanks for any answer to this question.
I have an old APC 700, and I think the battery needs to be replaced. A red light in a box w/ an x is lite, and thing was beeping like mad. But, I moved cables and I have a light fix. I'm either swapping battery or buying updated system
My red light replace battery went on for two days third day all is working fine? Please explain. Battery is 3 years old? Should i replace it anyway? Thank you..
Have apc smart ups 700 and no texts on leds, but some battery with wave inside is lit and it's continuously making the beep noise. No button pressed helped in any angle, just removing the power IN cable from ups made it shut down and putting it back on, it just turned on like nothing had happened and everything looking fine... BUT IS IT? (it has been happening last few months every second week now...)
I have an old APC Smart UPS 750. The thumb pins that hold the battery door in place are broken. Any suggestions on how to fix this or get replacements?
My unit, not sure of the brand name (China) but found out it wasn't working on brown outs and it was hot, I took it apart and the battery was dry, I filled it with purified water and began charging and after a couple hours both lights started squealing at the same time, I tried unplugging the unit and recharging but these lights won't stop? Bad battery or?
Hello I am new to troubleshooting APC devices and we have a number of our units telling us that "At least one faulty battery exists. [0X0119]. can you help me figure out how to resolved this? Do I replace all the batteries involved?
Have recently acquired an APC Smart UPS 750 with indicator lights similar to the type in the vid, except mine has symbols instead of words on the various lights. When in the battery power mode, ie, power failure with the UPS supplying power, there are 3 bleeps every 30 seconds or so. What does that mean?
good afternoon, I have a surt 5000 xli apc, change battery and battery LEDs blink when I put load, does not have rs232, but has RJ45 connector, as I can fix it? Thank you
hi, i have an APC 750 XL. I've used correctly for more years, but today all led around the test button and off button flash constantly. i can't use my pc and devices connect to my ups... :( what does it mean? pleqse help me!
I left my new APC battery 650VA / 360 WATTS for 10 hours straight to charge up and still the red power light keeps flashing which I do not seem to understand why? I use 2 PC desktops with monitors and some drives connected to it. Is it too much power consumption for the battery but I used to use APC Backup 550 before (same computers, monitors and drives) which had 330 watts less than this new one with no problem. Anyone please help. Thank you.
Hi guys, I had just bought a an APC Back-UPS BX650Ll-MS, and sometimes it just create an "off audible alarm" clicking sound while using it. The sound is same sound like when I uplug the unit from the outlet. Is this clicking sound normal?
well....how about you made a video of troubleshooting those LEDs when they are showing some errors....for example....if the red alert LED lits with 2nd and 3rd LED on battery bar....etc..etc...i know theres a list of error codes by LEDs...just like PC BIOSes have it by beep codes...
I recently modified my APC Smart-UPS 1000 to use 2 RC7 batteries which basicly makes it a Smart-UPS 1000XL and gives me longer a run time. My question is will this effect how the software looks at the remaining battery charge capacity? I guess what I'm asking is will the software tell me I'm low on power when in fact I have extra capacity?
I have a quick question. My APC xs-900 used to have a batery 12v 7.5 amp, I bought a 12V 9amp replacemente batery. Do you see any issue with the higher amp?
There is no issue with using higher Amp-hour (Ah) batteries. It will just make the run time longer. You would have more time to save work and shut down your computer.
I have an app 550 VA and I get no power when I plug it in nor when I run it on battery all I see is the led next to the on battery and replace battery the green light keep blinking with no sound and won't power on please help !!!!!!
i have an APC Smart 750,the batteries died and were replaced a few days ago, but the led battery indicator lights wont stop blinking, and the battery levels go from 100 to 20 in a second, but on battery and over 20% load, it runs for over 30mins. how can i fix this?
+Michael Osude The problem is probably calibration or the charging circuit is not functioning. We would suggest getting the unit serviced. Visit coasttec.com to request a quote.
+CoastTec the charging circuit works coz the led rises from 1 to 5 but it stays blinking even when full, and if the grid power is disconnected, the led goes down to 1 but the UPS runs for over 30mins before powering off. how can i calibrate the UPS, i tried with powerchute but it didnt help
Am also having the same problem you are having with my 3kva apc ups. Plz... Sir could you help out because I have tried replacing the burnt transistors and the driver ic yet am having same problem.
It sounds like your battery is dead and won't take a charge or the charging circuit is not functioning properly. give us a call we can help 410-521-1000
Hello sir i have apc smart ups 3000xl which is showing problem it is working but some time turn off and load side and battery side led flash continues and not giving back up power also i can send u video if i can get ur email thank
+James Ram because they only last a few years. My first set of batteries ran dead after 7 years, this set is starting to die after 5. Other people tell me I'm lucky they lasted this long. A new set for the APC SMART UPS 1500 will cost $159 from APC, or $99 from an aftermarket company. It's a good idea to check the UPS every six months to see how well it is working, as well as opening the front to see if the batteries are getting warm or swelling. Doing this is like checking the oil in your car; it only takes about 5 minutes, and will make sure the UPS will work when you need it.
Hi Thanks for the info... I still have few questions... I have APC 1500XL and i am only using it for a single computer. This UPS is hacked to support external and bigger batteries... I have attached 180x2 Acid batteries. 1. UPS does not fully charges the batteries. When it switches to battery it directly goes to 60% the third light. 2. It keeps switching between Battery and Online when i have load on it. When i turn off the computer it charges normally. Please tell me what is the problem and how i can get it fixed . Your Help would be appreciated. :) Thank you.
Shoaib Rafiq Same problem with mine..when switching to batteries 2 points of battery gets down even if no load on other site... apc technician , to whom i purchased this unit say it's back-up is on last 2 points on liquid batteries..don't know he is right or wrong..need to confrm
Every new gen unit I bought failed, most with a few days. Ever since APC sold out to Schneider, they have been unreliable and even dangerous. I stopped buying them and only use Tripp-Lite now.
Shaun-Kendall Sooknanan There is actually no way to silence the audible alarm short of removing the buzzer. If you are adjust the sensitivity of the unit, the alarm will happen much less frequently…you can refer to the video about adjusting sensitivity.
STOP STARTING SENTENCES WITH THE WORD "SO"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
what exactly that load indicator mean? is it max watt of device that using it? where we can get this data? like example im using apc 1000
Thanks for the video. How do I tell how long the power was out for when I return home and see that the power went out? When I flip through the screens on my APC UPS I see a screen that says Event 30. Does this mean the power was out for 30 minutes? I can’t find info on this anywhere surprisingly. Thanks for any answer to this question.
I have an old APC 700, and I think the battery needs to be replaced. A red light in a box w/ an x is lite, and thing was beeping like mad. But, I moved cables and I have a light fix. I'm either swapping battery or buying updated system
Of course mine is doing something you didn’t cover. The “battery charge” lights (all of them) are blinking. What does that mean?
My red light replace battery went on for two days third day all is working fine? Please explain. Battery is 3 years old? Should i replace it anyway? Thank you..
Load is 20% , What does it mean?
20% of 1980kWH max capacity? That would give us around 396kWH per load bar? Please correct me if I am wrong.
I've got a smart UPS 1500 where the load, AVR Trim, on line and AVR Boost were flashing continuously
Have apc smart ups 700 and no texts on leds, but some battery with wave inside is lit and it's continuously making the beep noise. No button pressed helped in any angle, just removing the power IN cable from ups made it shut down and putting it back on, it just turned on like nothing had happened and everything looking fine... BUT IS IT? (it has been happening last few months every second week now...)
I have an old APC Smart UPS 750. The thumb pins that hold the battery door in place are broken. Any suggestions on how to fix this or get replacements?
My unit, not sure of the brand name (China) but found out it wasn't working on brown outs and it was hot, I took it apart and the battery was dry, I filled it with purified water and began charging and after a couple hours both lights started squealing at the same time, I tried unplugging the unit and recharging but these lights won't stop? Bad battery or?
Pretty sure you need to add distilled or deionized water not purified water
Please can you tell me what's mean all the lights working together?
Hello I am new to troubleshooting APC devices and we have a number of our units telling us that "At least one faulty battery exists. [0X0119]. can you help me figure out how to resolved this? Do I replace all the batteries involved?
Have recently acquired an APC Smart UPS 750 with indicator lights similar to the type in the vid, except mine has symbols instead of words on the various lights. When in the battery power mode, ie, power failure with the UPS supplying power, there are 3 bleeps every 30 seconds or so. What does that mean?
Just replaced my batter on 1500, now all lights are on (solid not blinking). Tried brain dead test as well and I can't get them to go off. Any ideas?
What do I do to get this thing to stop beeping!!! I’m in church and this thing is going off!!!!
very helpful video thank you.
Is APC UPS normal getting hot even it is not being used?
When i was playing on my PS4 it suddenly started blinking green and then switched itself off. I have no idea why it happened
good afternoon, I have a surt 5000 xli apc, change battery and battery LEDs blink when I put load, does not have rs232, but has RJ45 connector, as I can fix it? Thank you
hi, i have an APC 750 XL. I've used correctly for more years, but today all led around the test button and off button flash constantly. i can't use my pc and devices connect to my ups... :( what does it mean? pleqse help me!
My aps ups of 3000 va is not getting on due to touching both terminals plus towards nagative
Can u help ma what I have to do
I get no lights front or back of unit. Is it worth sending it for repair?
I left my new APC battery 650VA / 360 WATTS for 10 hours straight to charge up and still the red power light keeps flashing which I do not seem to understand why? I use 2 PC desktops with monitors and some drives connected to it. Is it too much power consumption for the battery but I used to use APC Backup 550 before (same computers, monitors and drives) which had 330 watts less than this new one with no problem. Anyone please help. Thank you.
My Ups is beeping amber light on charge what does it mean
Hi guys, I had just bought a an APC Back-UPS BX650Ll-MS, and sometimes it just create an "off audible alarm" clicking sound while using it. The sound is same sound like when I uplug the unit from the outlet. Is this clicking sound normal?
well....how about you made a video of troubleshooting those LEDs when they are showing some errors....for example....if the red alert LED lits with 2nd and 3rd LED on battery bar....etc..etc...i know theres a list of error codes by LEDs...just like PC BIOSes have it by beep codes...
Hi all LEDs are blinking and beeping, what is the problem
How do I know if it is charging???
my same apc 1500 ups flashing all light and dead. what was the prbolem?
good
My apc ups create a problem when i attached ac supply and on then all LED lights flashing what problem?
My APC ups requires resetting with a vga slot cable, using the software, I dnt know where to get that software and how to. Do. It, please help
my ups continuously ring and then red light flash on when i try to unplugged all the plugged at the back... what is the real problem of my ups?
Hi dear can you please help me with to get the software for this unit the interface software thank you
Thanks!!
I recently modified my APC Smart-UPS 1000 to use 2 RC7 batteries which basicly makes it a Smart-UPS 1000XL and gives me longer a run time. My question is will this effect how the software looks at the remaining battery charge capacity? I guess what I'm asking is will the software tell me I'm low on power when in fact I have extra capacity?
+52wml If you do a runtime calibration on the unit, which can be done through the network management card, then the unit will read the proper runtime.
+CoastTec Thank you for the response, it was most helpful and appreciated
. could you please help me to solve this , i have APC 1000av i have problem all led flashing when i tern the unit one
Please how can I resolve alarm error P.06 on UPS APC SMT2200IC
battery leds is flashing even after replacing them ???
I have a quick question.
My APC xs-900 used to have a batery 12v 7.5 amp, I bought a 12V 9amp replacemente batery. Do you see any issue with the higher amp?
There is no issue with using higher Amp-hour (Ah) batteries. It will just make the run time longer. You would have more time to save work and shut down your computer.
Could you please send me the circuit diagram of APU SMART UPS 1500.
Anyone know if replacing 1 battery will cause both battery to be faulty? Or I should always replace in pair?
WE KNOW IT'S HERE!!!!!!!!!!!!!!!!!!!
I have an app 550 VA and I get no power when I plug it in nor when I run it on battery all I see is the led next to the on battery and replace battery the green light keep blinking with no sound and won't power on please help !!!!!!
i have an APC Smart 750,the batteries died and were replaced a few days ago, but the led battery indicator lights wont stop blinking, and the battery levels go from 100 to 20 in a second, but on battery and over 20% load, it runs for over 30mins. how can i fix this?
+Michael Osude The problem is probably calibration or the charging circuit is not functioning. We would suggest getting the unit serviced. Visit coasttec.com to request a quote.
+CoastTec the charging circuit works coz the led rises from 1 to 5 but it stays blinking even when full, and if the grid power is disconnected, the led goes down to 1 but the UPS runs for over 30mins before powering off. how can i calibrate the UPS, i tried with powerchute but it didnt help
apc rt 8000 xli fault led and battery 3 and 4 led on output power is dropped need help
I have a model APC Smart 1000, that charging indicator LED blinking all loading 2 led green ?
Am also having the same problem you are having with my 3kva apc ups. Plz... Sir could you help out because I have tried replacing the burnt transistors and the driver ic yet am having same problem.
After changing battery for my apc sua ups battery level led only one led flashing with a continuous beep why? need help please.
It sounds like your battery is dead and won't take a charge or the charging circuit is not functioning properly. give us a call we can help 410-521-1000
Hello sir i have apc smart ups 3000xl which is showing problem it is working but some time turn off and load side and battery side led flash continues and not giving back up power also i can send u video if i can get ur email thank
My apc1500 (same one you focused on in vid) will not power on. I plugged it in and it won't do anything. Any ideas?
+Tim Gomes Change the battery
why would you replace your ups battery?
+James Ram because they only last a few years. My first set of batteries ran dead after 7 years, this set is starting to die after 5. Other people tell me I'm lucky they lasted this long. A new set for the APC SMART UPS 1500 will cost $159 from APC, or $99 from an aftermarket company. It's a good idea to check the UPS every six months to see how well it is working, as well as opening the front to see if the batteries are getting warm or swelling. Doing this is like checking the oil in your car; it only takes about 5 minutes, and will make sure the UPS will work when you need it.
Hi Thanks for the info...
I still have few questions...
I have APC 1500XL and i am only using it for a single computer.
This UPS is hacked to support external and bigger batteries...
I have attached 180x2 Acid batteries.
1. UPS does not fully charges the batteries. When it switches to battery it directly goes to 60% the third light.
2. It keeps switching between Battery and Online when i have load on it. When i turn off the computer it charges normally.
Please tell me what is the problem and how i can get it fixed .
Your Help would be appreciated. :)
Thank you.
Shoaib Rafiq
Same problem with mine..when switching to batteries 2 points of battery gets down even if no load on other site... apc technician , to whom i purchased this unit say it's back-up is on last 2 points on liquid batteries..don't know he is right or wrong..need to confrm
l do replace the battery 12/18Ah into my APC 2200 ups and all light indicated like flashing
, please help me to do..
Same case..
Anyone can help?
Same case
Every new gen unit I bought failed, most with a few days. Ever since APC sold out to Schneider, they have been unreliable and even dangerous. I stopped buying them and only use Tripp-Lite now.
how to take off audible alarms for this UPS?
Shaun-Kendall Sooknanan There is actually no way to silence the audible alarm short of removing the buzzer. If you are adjust the sensitivity of the unit, the alarm will happen much less frequently…you can refer to the video about adjusting sensitivity.
+CoastTec you can disable all the alarms by modifying the EEPROM. My unit does not make any alarms.
+irishboym4 and how does one modify the EEPROM? I have two of these; and periodically, they go off in the middle of the night, waking my dogs.
Use APCUPSD,within that application use the program apctest
Press slightly the on -off button while beefing..it will disable the alarm..
All lights flashing....load became zero computers shuts down..it's APC SMART 1000
My battery light is on solid and my battery charge is all the way up...
NOBODY TELL JOEL
(anyone get the reference?)
+Jacob Watson VinnySauace
I am APC ups rapreng master
Can you explain yo me what exactly this thing is? Explain it to me like you would 10 year old
Jon boy it's a battery
Español
Модернизация ИБП ua-cam.com/video/P9ecQc5T6T4/v-deo.html
STOP STARTING SENTENCES WITH THE WORD "SO"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!