APC BE425M Battery Backup Replacement Instructions (Installed Upside Down By Mistake)
Вставка
- Опубліковано 3 сер 2024
- Do you need to replace the battery in your APC 425VA unit? Follow along as I replace my battery. NOTE: I installed it upside down in this video. Someone noticed, and that's why I had such a hard time. I have since taken back apart and flipped it - worked perfectly!
Link for the battery
Amazon.com: amzn.to/3I6GFZs
Amazon.ca: amzn.to/3IaPAZQ
-- Computer Build --
(Amazon.com)
EVGA 3090 Ti FTW3 Ultra: amzn.to/3KjCNmB
AMD Ryzen 9 5900X CPU: amzn.to/3MARnI1
ASUS TUF Gaming X570-Pro Wifi Motherboard: amzn.to/3xYkZuH
G.Skill Flare X Series CL 14 32GB (4 x 8GB): amzn.to/3vJazfQ
Samsung 980 Pro 2TB NVMe Gen 4: amzn.to/3EMGgcj
Phanteks P500A White Case: amzn.to/3vhv0l6
ARCTIC Liquid Freezer II 360 AIO: amzn.to/3KiRHcX
(Amazon.ca)
EVGA 3090 Ti FTW3 Ultra: amzn.to/3ODGyGH
AMD Ryzen 9 5900X CPU: amzn.to/37LOeX1
ASUS TUF Gaming X570-Pro Wifi Motherboard: amzn.to/3OGcBG0
G.Skill Flare X Series CL 14 32GB (4 x 8GB): amzn.to/3xTFSHj
Samsung 980 Pro 2TB NVMe Gen 4: amzn.to/3rSCNDI
Phanteks P500A White Case: amzn.to/3KdXH6x
ARCTIC Liquid Freezer II 360 AIO: amzn.to/3vMsan0
-- Recording Gear --
(Amazon.com)
Sony a6500: amzn.to/3xTIULP
Sigma 16mm f/1.4 lens: amzn.to/3Kfw25d
Sigma 30mm f/1.4 lens: amzn.to/3rRRCqh
Andycine A6 5.7" monitor: amzn.to/38osrVc
PowerDeWise lavalier lapel microphone: amzn.to/3xVUohU
HyperX QuadCast USB microphone: amzn.to/3KfwGj9
Neewer microphone stand: amzn.to/3LhvjSr
(Amazon.ca)
Sony a6500: amzn.to/3jpoIsQ
Sigma 16mm f/1.4 lens: amzn.to/3Jx20JH
Sigma 30mm f/1.4 lens: amzn.to/38JO5DL
Andycine A6 5.7" monitor: amzn.to/3rhlImK
PowerDeWise lavalier lapel microphone: amzn.to/3Ob1yV8
HyperX QuadCast USB microphone: amzn.to/38FBXn8
Neewer microphone stand: amzn.to/3rfJOya
My Instagram - / johnlcharette
My Facebook - / johnlcharette
My Twitter - / johnlcharette
Need Copywrite free music for your UA-cam videos? Check out Epidemic Sound: www.epidemicsound.com/referra...
For a daily dose of business-related news straight to your phone, check out Morning Brew: morningbrew.com/daily/r/?kid=...
TIMESTAMPS
0:00 Intro
1:07 Why?
2:05 Instructions
7:05 Testing It Afterwards
8:09 Conclusion - Наука та технологія
Hi, sorry to mention this, but your battery is upside down vs. the orientation that I found when I opened my APC 425. That may explain the problem with closing the case.
Ohh Bob, if you're correct, you'd be my hero! I'll take it apart and flip it around. If that solves it, I'll make sure to pin this comment. Thank you so much!
You were 100% right!!! Thank you so much for your comment. You're the best :)
I put mine in with the connectors down and mine didn’t fit back together easily either. The whole thing seems to be designed to be thrown out when the battery fails. I have purchased a LOT of APC products over the last 30+ years and have replaced a lot of batteries. This is the WORST that I have ever seen. Just sh!tty product design.
@NLTMW I had a similar feeling, as you can tell the frustration in my video. Junk product.
I'm having exactly the same problem. The battery is in exactly the same position the old one was. What do you mean "Upside down?" I can turn the battery around but then the wires don't reach....?
My replacement battery was $27 including Prime free shipping. Other than the very narrow screw holes it was an easy replacement. For half the cost of a new unit, it was worth it to me. I think it lasted 4+ years. My original battery has the bottom of the battery next to the base, with the terminals at the bottom of the hole. Still it slide out easily for replacement. The toughest part was pulling the terminals off of the dead battery. An easy replacement. It took longer to locate and order the battery than to replace it.
Good! I'm glad you had an easy battery swap. Unlike me, who replaced it upside down :( haha
+ 1 for pjengland01 - the screws were my Achilles heel, but I got that last one out and everything else was smooth sailing!
Thanks for the video, you saved me $37. I also don't have a screwdriver that works with this piece of crap and I wasn't interested in buying a new screwdriver just for this. So, I went Office Space on it and had a lot of fun destroying it. Smashed it on a concrete floor until it was in pieces, recycled the battery, cannibalized it for wires and threw the rest away. Again, lots of fun.
Oh gosh, that's amazing. I love that movie! Totally agree though, it's a piece of junk so I'm glad you enjoyed yourself ;)
This video really gives one a charge . The fast motion is a real live wire . Did you know that the favorite sport in electric companies is circuit training . Thank you for plugging away .
Always helps to put things back together they way you took them apart in reverse order.
Captain obvious strikes again ;) It's crazy how hard simple things can be when you have a camera pointed in your face.. haha
Thanks! I was able to install my new battery in around 3 minutes or less.
Battery connectors should be facing down when installing the battery upside down... Then it should snugly snap back together (may need to add a little pressure) then you can screw the bottom cover back on.
Having the proper long philips head screw driver is a must for this repair.
Ha! I’m glad my torture helped you install yours quickly.
Hey John... I have the same model. I removed the little 4.5 AH battery. Opened up a hole in the air vents where the battery was and ran the cables out through the hole.
I purchased a 15 AH lithium battery on Amazon for $49.00 and spliced in another 6 inches of line cord wire to the new and much larger battery. Easy Peazy. The lithium battery is rated at 4000 charge cycles. Since I only power my modem and router off of this and I only need 10 to 15 min to fire up the generator it should never discharge more than 30%. the new battery should last "forever" .
Oh wow! That's a really interesting mod. I haven't used lithium batteries much, but I hear they are amazing. Did you record this process? I'd love to see it.
Just subscribed! Can't wait to see it.
NERMAK 12V 5Ah was the lifepo4 with overcharging Bms is the one I used . Just yank the small round black speaker off with plyers when you’re in there. Never hear it again..
Thanks for the battery info and instructions on how to remove the speaker ;)
Replacement batteries are going for $20 or less now, it's definitely worth fixing.
I like that clock that you had behind you during the video. Does it actually work and where did you get it?
Thanks! Yes, it works when I plug in two AA batteries. I don't bother though, as you may see the time change during my edits. It's from Urban Barn.
I just bought one and planning on a 2nd one but I think I am going go buy the big brother instead, more expensive but I think worth it when trying to replace the battery, this looks horrible to replace the battery.
Yeah, probably a good idea. I wouldn't recommend this model to anyone!
I agree APC unit BE425M it is a piece of junk it uses a reduced size battery and you have to have a super long Phillips screwdriver small enough to remove the screws an order a small shortened battery to put in it it's not worth the money! Do not order one of these off Amazon or anyone else
the speaker is black and round on the board. just pop it off which will never again make a noise. its so easy. very common fix
Ohhhh, really good to know. I mean, I don't mind the fact that the device tells me when to replace the batteries, or else I'd never know.
That UPS would be too small for my needs anyway. I need to keep my iMac and my game console going just long enough to wrap up the current level or save files, etc. What sucks is that APC doesn't make software that's Mac compatible. I'm forced to rely on the Mac OS's built in energy saver settings for a UPS.
How do i know if my battery needs to be replaced? I’ve only been using mine for 4 months. It sat in the box for a few years before I started using it. Once a month or so it beeps and I can’t mute it, i have to turn it off, it’s super annoying!!!
Replace it! Batteries have a shelf life. It's a cheap replacement battery. Watch my video, but make sure you install it the right side up vs the way I did it. hah. Good luck and save yourself from many horrible beeping sounds.
My unit was unevetful but the battery is upside down and with the leads facing power outlet side the unit went back together uneventful!!!!
Ha! I knew it. Silly me, I must not have noticed when I took it apart before recording the video. I'm sure you could see the frustration on my face trying to get it back together the wrong way. Thanks for leaving a comment. I'm glad your unit went back together easily.
Great Video. Great description and factual. Battery replacement will take hours. Skip replacing the battery. Buy a new unit. APC: this one is an F minus.
The Amazon link in the description goes to a battery that will technically work, but has F1 terminals instead of F2 . F1's are much smaller then the F2's found on the OEM battery and what the cables inside the device are expecting. Amazon won't allow returns for Led Acid batteries so I followed the advice from this video (ua-cam.com/video/CsRTYQmFYF4/v-deo.html) and purchased F1 to F2 adapters from Amazon. Like in the linked video, the connections still weren't snug so I soldered the adapters to the battery terminals. John should really update his affiliate link to a battery that has the proper terminals. All that being said, the battery is installed, it wasn't very hard, and it revived my dead unit for half the price of a new one.
I am so sorry!! That's the exact battery that I ordered and used in my video. I didn't realize the terminal size difference. Perhaps that's why I struggled to get mine connected so much. I'll do a search later today and update the link to batteries with F2 terminals. I appreciate the information so others don't experience the same problem.
Links updated!
@@JohnLCharette Thanks for keeping up with your comments section!
What type of screws are used to keep it closed...star, phillips , flat
Phillips or star
What type of screws are used to keep it closed....Star, Phillips, Flat
Phillips or star
Phillips and Star are not the same
Ahhhh, I see what you mean. In Canada, we call Star a Torx screwdriver. So, to answer your question, it was a Phillips screwdriver.
@@JohnLCharette Thanks
I don't know if you were trying to be humorous in the process of removing the battery and auditioning to be in one of those commercials when they try to make the simple things seem impossible? LOL. You acted like lifting a screw driver was like lifting 400 lbs. LOL!!! Once I over looked your poor attempt to make something simple look very difficult, I appreciated the video showing how to replace the battery and save me some money.
Haha, good. I'm glad the video helped. Those videos aren't scripted, I just roll with it.. whatever happens, happens. I do try and have fun with it though ;)
What type of screws are used on it.....STAR, FLAT OR PHILLIPS
Phillips or star
@@JohnLCharette Wish I could post a pic, but they are not the same.
Ahhhh, I see what you mean. In Canada, we call Star a Torx screwdriver. So, to answer your question, it was a Phillips screwdriver.
It's definitely a poor product in my experience. First, as demonstrated, the unit is difficult to work with for the purpose of battery change out (it is my recollection APC does not recommend consumer-performed maintenance on the product, and I am sure they designed it to be difficult for all but the most insistent customers, hoping their customers would simply by a new APC unit). Second, when working as designed, this APC UPS provides very little real world time to save one's work, then perform a graceful shutdown while on battery power. It no doubt gets worse as the battery ages, but how does one know the relative battery strength without an external testing port or reliable indicator? Changing the battery is worth the pain if one needs and wants only a very light-duty UPS knowing the above. I am cheap and have replaced my battery twice now.
Yeah, agreed on both points. I've only had to replace the batteries once. I have since given this unit to my wife, for her laptop, which rarely gets used and has very little load. Hopefully it continues to work well for that purpose.
Even with an easy installation, the cost of the replacement battery doesn't seem worth it versus just replacing the whole unit (with something better).
100% agree. Any recommendations on a better unit?
yes, I’d like to know what you recommend as well, as I’m due for either a battery replacement or whole unit replacement, thanks!
@@JohnLCharette I can recommend APC's BX1000M's at $120-130, but anything professional grade should do the trick from Tripp Lite, Cyberpower, etc. I haven't ponied up for the sinewave units yet, but hear they are good.
@@igobythisname I like the BX1000M for a basic UPS, you can get up to 1500VA in that form factor but a 1000VA is fine for normal setups.
@@stephenathon thanks. So are you really buying one every few years… because batteries have a shelf-life”..!?! This one i have i asked for in a gift exchange, i barely used it 4 months but it did sit for like 2 yrs, i can’t believe i have to replace it already!?! (Or it’s being overloaded. About once a month it beeps and won’t mute, i have to turn it off)
You put in upside down. The wire section need to go down inside
Yeah, I realized that afterwards :( I updated the title and description. I'm sure the install would have been much easier had I realized that at the time.
😅😂😅😂😅😂😅😂😅😂😅😂
Why can't this piece of crap run without a battery? Only 2 of the 6 outlets work with the unit off.
Most battery backups have outlets that are surge protected and then others that are battery backup protected. I'm guessing, if you don't have a battery, you can't use those outlets.
I had the same fun you're having the battery upside up, but the battery goes in at the terminals first. Horrible product btw
I'm glad I wasn't the only one who messed that up! haha. Agreed. Not impressed with the build quality, but not sure what to expect for a $50 battery backup.
p̶r̶o̶m̶o̶s̶m̶ 🤦