Guide To Installing Your Yale Assure Lock
Вставка
- Опубліковано 23 сер 2024
- Follow these steps for installing your Yale Assure Lock. This guide applies to the below models:
- YRD216 and YRD416
- YRD226 and YRD426
- YRD246 and YRD446
- YRD256 - Навчання та стиль
I wish every product had an installation video this easy to follow.
My lock is missing the cable hole through the mounting plate! As a result, the cable is frayed and I am having to wrap new insulation around it.....must have been corrected later. Yale is sending me a new improved design mounting plate even if my lock was sold in 2013! Fantastic service....
Can I use my old key on this one ? Without hiring a key smith?
I wish they could make a better deadbolt. I am installing one now and notice that there is gap between deadbolt and barrel. Compare to schlage dealbolt, Yale could have done better job
Make sure you have the key in hand, it locks when it closes. Think it’s about 15 seconds delay. I forgot my key and the code so I was locked out. 😅
Make sure to see what others say about their app on google app store before you purchase this product!
Need a 5yr update, please. The current Assure 2 (with key) is little like this, especially at the programming stage.
Hi! Here is the video for the Yale Assure Lock 2 Keyed install: ua-cam.com/video/fCGGuBr2Uhg/v-deo.html
Really well made - thanks...
One of the most frustrating things I’ve ever tried to install. And I’m a network engineer 🤦♂️
Why? Aside from the fact that I had to widen the existing hole in a door that has metal layers on each side, the rest of the installation & setup went fine. I even got the August Connect to work.
Since when are network engineers handymen?
Rite!!! I unscrewed too it apart, put it back together, re-screwed back in several times. 😢 Finally it works!
thanks
I try to install my Yale assure lock but it’s not right because the pin pad inside the house if I want the pin pad outside it’s not working the motor in the lock turn wrong way it can turn right way with pin pad outside it need to install upside down
I can’t figure out how to install pin pad outside house and working.. can someone help me ? Thanks
I read that you have to do a factory reset and it will try turning both ways and register the appropriate way.
Hi, i need the manual for YRD226...
where do i can get it.....
how do you program the RFID key
My door opens from right to left and I had my Yale in a door that opened the other way around so now is not opening when I need to open how can I change direction
I have the same issue. Were you able to solve this?
@@abrindeyev I have the same issue please help
@@jesusrosario5776 Once you perform a factory reset and install the lock, it will try both options and remember the correct one - until the next reset
What is the latch face plate dimension?
A NIGHTMARE to install.
Anyone got the app working? I'm struggling to find anyone that has 😂
Now do one in metric.
This lock and the included instructions suck. The "long" bolts DO NOT go in all the way. Also, this thing does not line up straight.
You can find 3D instructions on the free BILT app. Our locks only fit up to 2 1/4" tick doors. Check your door prep and door alignment and check out this video for tips on adjustments: ua-cam.com/video/QnhNOx1G-5o/v-deo.html
The longest bolts are NOT for regular 1 3/4 doors. You should specify that in the video instead of telling us to use the longest bolts. For regular 1 3/4 doors you have to use the medium length bolts or you will smash the screen out of the touch pad. Jesus christ would that have been that hard to specify in the instructions?
This was DUMB and VERY UNinformative