Install Yale Assure Lock SL Deadbolt YRD256
Вставка
- Опубліковано 6 чер 2024
- Step by step instructions for installing the YRD256 Series Yale Assure deadbolt lock SL. Start by removing your old deadbolt lock from the door. Next put the latch bolt in (make sure you have up pointed up). Then put the electronic/touchscreen unit in with the cable under the latch bolt. On the inside of the door install the mounting plate with put the cable through the cutout on the mounting plate. Put the two posts in the touchscreen unit. Screw two bolts through the mounting plate to the electronic unit. Now attach the cable to the interior mechanical assembly unit (make sure the dots are facing out on the wire harness). Next, attach the mechanical assembly unit to the mounting bracket with the three screws. Now install the Network module and then put the batteries in. Put the battery cover over the batteries and tighten the screw. Now test your lock by throwing the latch in and out.
9:02 Programming Instructions.
Wake the lock by putting the back of your hand on the touchscreen. Push the gear key, enter the master pin code (I suggest you use 8 digit code) then gear key. Next touch the keypad it will test the latch bolt. If it jams you will want to make sure that your latch lines up with the latch plate on the door frame. If it binds at all or doesn’t move freely. You will need to adjust the latch bolt on the door and or the latch bolt plate on the door frame. To add a user code enter the master pin followed by the gear key. Next hit #2 then the gear key 1 to add a pin code followed by the gear key. Next, put the user pin code followed by the checkmark. You are now finished with installation and programming. The Yale YRD256 is now ready to be used.
This install video will work on the YRD256 series of locks
This includes models YRD256-NR-OBP, YRD256-NR-619, YRD256-NR-605, YRD256-ZW2-619, YRD256-ZW2-0BP, YRD-ZW2-605, YRD256-iM1-0BP, YRD256-im1-619, YRD256-iM1-605, YRD256-HA2-605, YRD256-HA2-619, YRD256-HA2-OBP
Smartthings Network Install
Ring Alarm Network Install
The Yale assure lock comes in both oil rubbed bronze, brass, and satin nickel finishes.
Network modules: Homekit, Z-Wave, August
The Yale YRD256 lock will fit between a 1-3/8” to 2-1/4” thick door - Навчання та стиль
What a clear, easy step by step guide. Thank you Chad!
Thank you for watching!
These are fantastic instructions! Very easy to follow
Thank you so Much this is very helpful and easy to follow along instructions.
Best instructions ever. Thank you!
Thank you for saving our lives 🙂
Thank you for watching!
This video was extremely helpful💯👍🏽 Thanks so much!🙌🏽
Thanks for watching!
I subscribed to your channel and thanks so much for your video, I love these type of videos just get to the point ! Respectfully on other videos people talk about their life, and this and that , blah blah . this video is great A++
Appreciate you for this! 🙏🏾💯
Thanks for watching!
Wonderful video, thank you.
Thanks for watching!
Thanks for the helpful instructions.
Thanks for a great video!!
Thanks for watching!
Thank you this helped a lot
Thanks for watching!
Very nice video thanks for the info
Thanks for watching!
very simple to installation and using
Great man!!! Thanks.
You're welcome!
Thank You
No one has explained how to connect to the wifi or how to connect z wave
Fucking crazy isn’t it?
Thanks! This helped!
Glad to hear!
What size bore hole do you need in your door.? Mine is 1 3/4 and a lot of these locks require 2 1/8 and I don’t want to have to try and re drill the hole. Great video.
Thank you Sr!
You are welcome and thanks for Watching!
Thanks. Very well explained! Can you post the link to your Z-wave video?
Thank you! Its outdated but here it is ua-cam.com/video/6iw1DySJWno/v-deo.html
@@sellgooddeals-DIY How is it outdated? Has something changed in the instructions?
The top of your video shows the deadbolt sliding left on the (interior) left side of the door. But you switch to a deadbolt sliding right on the interior, further on. How do I install the dead bolt on the left side of the door? Or does this lock not allow that?
All locks allow for installation left or right on the door - they call it "handing". The confusion can creep in while looking at the direction and figuring out which "hand" you are installing. In most cases the door lock will figure it out on it's own. With some other locks the difference could be the orientation of the thumb key inside the door - either vertical or horizontal. Some locks, like Simplisafe, have little auxiliary pieces that you have to figure out which to use and how to orient it inside the latch. Really not that hard.
Great video! Do you need a network adapter for this to work, or will it work without it/ or just with code
Unless you have a module that is connected to a controller its code only.
@@sellgooddeals-DIY if you have a module, can you use an iPhone/android app to create new codes with expiration dates, etc?
How long are the batteries good for in this lock? Thanks
I change mine out yearly. My mom gets about two years on hers. It depends how much you use it. Also, using the module for home automation drains the battery as well.
There is no key hole to pick this lock. I have seen youtube video for smart locks where they use other tricks like powerful magnet or closed the circuit by wires by opening front plates. Has this lock been picked? By pick I mean opened by someone by using some tricks or manipulation? Any way those were other brands smart locks and not sure about Yale lock. I don't want to spend more than $300 and only see it can be opened just by magnet or cheap trick. Can front plate be opened from outside?
Hi. I even couldn't to set the master code. How I can do it? isn't allowing me. Do I have to factory reset?
Yes, give that a try. Out of the box it should be reset but maybe they didn’t on yours.
do you have to put in the code to lock the door also?
You put your hand over the screen to lock it.
@@sellgooddeals-DIY it doesn’t do automatic locking after a certain period of time or something?
I installed the lock today and it keeps saying check door handing. Any help?
Here is an explanation: The Yale Real Living lock will automatically determine
whether it will function as a right or left-handed lock. (The "hand" or "handing"
of the lock, is determined by the side of the entry door that the hinges are on
when standing outside the door)
When the batteries are properly inserted for the first time, the lock will attempt
to determine its handing - whether the lock is installed on the door or not. If the
lock is not completely installed on the door, it could hand itself incorrectly.
Should this occur, the lock must be installed on the door and then reset to its
factory defaults, allowing the lock to "hand" itself correctly.
Video on resetting the lock: ua-cam.com/video/E8DLn0AKMTw/v-deo.html
I installed this lock today dont know how to change the language
Do you know how to turn off the sound?
Yes, it should be: master pin, gear key, 4, gear key, 3, gear key. Good Luck!
Thanks! Big help
P
I hate this lock
These are fantastic instructions! Very easy to follow