Lol, just trying to keep it going. I guess like everything else, once you know, you keep learning something new and more. Have a Blessed Day Friend. Justin
I use the TerraClean tool and products to clean the entire system in about 1.5 hours. I do not have to remove the valve, I hook in at the temp sensor, remove the egr actuator, and replace it with a thumb screw plate so I can open and close the valve. The system cleans the intake, grid heater and the combustion chamber,egr, egr cooler, turbo, and dpf. Basically everything "tip to tailpipe" Excellent video however, the TerraClean system has been life changing.
When my EGR cooler went bad, it was used probably 4 gallons of coolant from Washington back home to MS. So if your loosing coolant and don't see a leak, EGR cooler could be bad. Your EGR crossover tube will be wet to pasty instead of black dry soot. Have a Blessed Day Friend. Justin
Out of curiosity, is this the same thing as the check engine light that is supposed to come on around 60k miles? It basically tells you to take to a dealer for an EGR clean. If so, this a $1200 dollar service to do what you just demonstrated?
The 60,000 mile service light is to replace the crankcase filter. The EGR and EGR cooler is based on what year model you have. Your owner manual should give some detail on when to have that service done. I think it is usually around 75-100,000 miles. Have a Blessed Day Friend! Justin
Might I ask how many miles you had on the truck when you did this? Also, lots of towing/ highway driving? I’m at 125k with mine with lots of towing and 75% highway driving. I don’t notice any of the symptoms of a dirty egr. Just curious if it’s necessary. Thank you.
I think this was the second time I did this but about 75-80,000 miles since the last time. It wasn't bad at all. Mine is 100% long highway miles 250-400 miles between stops. I just do mine as preventive maintenance. Hope this helps. Have a Blessed Day Friend! Justin
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
You’ve become quite the diesel mechanic, have a great weekend and God bless.
Lol, just trying to keep it going. I guess like everything else, once you know, you keep learning something new and more. Have a Blessed Day Friend. Justin
That reminds me, I need to clean my egr valve. Thanks Brother! I like the music too!
Wasn't sure what music to put with it but found this and thought it would living it up a bit. Have a Blessed Day Brother. Justin
I use the TerraClean tool and products to clean the entire system in about 1.5 hours. I do not have to remove the valve, I hook in at the temp sensor, remove the egr actuator, and replace it with a thumb screw plate so I can open and close the valve. The system cleans the intake, grid heater and the combustion chamber,egr, egr cooler, turbo, and dpf. Basically everything "tip to tailpipe" Excellent video however, the TerraClean system has been life changing.
Thanks for the information. That sounds like a great way of getting it all clean. Thanks for sharing. Have a Blessed Day Friend! Justin
I was able to put them keepers in today by doing it 1 by 1. Like you did it near the end
Nice how to, Justin. Lots of nice tips for getting that job done. Hope you and the family are having a blessed week!
Thank you Rob. You and your family have a Blessed Day and Week as well. Justin
Thanks for the video man. I also have a 2017 3500.
Your very welcome. Have a Blessed Day Friend! Justin
Thanks for the great tutorial!
Thanks friend god bless you as well
Great video, thank you!
Your very welcome! Have a Blessed Day Friend! Justin
Thanks for video.
Your very welcome! Have a Blessed Evening! Justin
Great video sir !!!!
Thank you. I appreciate it. Have a Blessed Day Friend. Justin
But did you coean the carbon in the other side?
Yes! I soaked it in the carburetor cleaner and moved the valve all the way back and sprayed in behind the valve, Hope this helps!
@@homegrowncountryhomeplace im talkin the carbon in where the egr is connected, those 2 holes you see after you remove the egr
@@Apabilliardnewwave No, I didn't do any cleaning on the intake side.
My truck is at 68,000 miles right now. Just did the CCV today
Wondering if I should try and do this in the next few weeks?
Its not a hard job. Now I will say it probably isn't necessary right now. Mine wasn't to bad.
Thanks Justin
Your very welcome. Have a Blessed Day Friend! Justin
did your truck consume radiator fluid prior to this repair,? if so how much?
When my EGR cooler went bad, it was used probably 4 gallons of coolant from Washington back home to MS. So if your loosing coolant and don't see a leak, EGR cooler could be bad. Your EGR crossover tube will be wet to pasty instead of black dry soot. Have a Blessed Day Friend. Justin
Out of curiosity, is this the same thing as the check engine light that is supposed to come on around 60k miles? It basically tells you to take to a dealer for an EGR clean. If so, this a $1200 dollar service to do what you just demonstrated?
The 60,000 mile service light is to replace the crankcase filter. The EGR and EGR cooler is based on what year model you have. Your owner manual should give some detail on when to have that service done. I think it is usually around 75-100,000 miles. Have a Blessed Day Friend! Justin
@@homegrowncountryhomeplace thank you sir.
Might I ask how many miles you had on the truck when you did this? Also, lots of towing/ highway driving? I’m at 125k with mine with lots of towing and 75% highway driving. I don’t notice any of the symptoms of a dirty egr. Just curious if it’s necessary. Thank you.
I think this was the second time I did this but about 75-80,000 miles since the last time. It wasn't bad at all. Mine is 100% long highway miles 250-400 miles between stops. I just do mine as preventive maintenance. Hope this helps. Have a Blessed Day Friend! Justin
Thanks
you're welcome. Have a Blessed Day Friend! Justin