Just a quick tip, I ran a very small bead of silicone around the rim on my decked Ammo boxes, I taped it off first to get very clean lines, removed the tape before it dried, let it full dry before reinstalling the lids, not one drop of water has made it in.
I’m a Florida Building Contractor and purchased a Decked a while back for my 2010 F250 and been working with it a while now and have a few recommendations for the company. The seal around the inside of the bed isn’t a tight fit so things fall between the gaps at the front and side, so I recommend additional cap access plates like you did for the pillars so you can extend the drawers out and use a hose to wash out under the Decked. Secondly the drawers are so deep and accessing anything further than 3/4 of the way back is difficult without removing everything in front of it. Perhaps a roller tray upgrade that would allow the items in the back to slide forward instead of trying to get the bins lifted over the divider rails and brought forward. I keep air tools further forward and accessing them when needed is harder when I have to lift them up slightly and pull them forward because a good portion of the drawers are still under the Decked top piece. In the Florida sun that plastic also gets a bit soft from the heat and noticed middle fasteners are spongy. Just my thoughts to help them make an even better product
Ok, just a shout out to the guys at Decked, I seriously pushed the limits for your product on Saturday. Pouring a little concrete on a job and had Home Depot fork lift 45 bags of 60lb. Sakrete on top of my decked system, handled it like a champ! 2700 plus pounds! ! I was impressed, the F250 dropped a few inches but the Decked held strong!
The Decked System has been awesome for me. I combined it with a Leitner ACS rack and boxes on my F-150 to fit my outdoor lifestyle: workin' and playin'. Had it since I bought with my 2017 F-150 and have never regretted getting it. Plus Made in 'Murica.
@@VTMAPLEVIEWFARM I has been for me. Between the decked drawers and the Leitner boxes, most of our camping gear is on the truck. The rack holds our roof top tent as well. Whether I am fly fishing (including my pontoon boat or kayak), upland bird hunting (the drawers keep my O&U shotguns and shells safe and out of sight, kayaking (paddles and PFDs plus other gear fit well in the long box), camping (kitchen & camp gear, hiking packs in the boxes), or helping a friend out on the ranch (chainsaw, Dewalt tools, etc)I have most of the gear in the drawers or boxes and little in the cab or on the bed unsecured (the kayak or pontoon boat mostly). No regrets. I got sale prices from Rack Outfitters.
Looking at getting a pickup again here soon once I’m paid off on my Subaru, and definitely wanted something that would function as an overland vehicle, a first responder POV rig, and something that can carry weight like an ATV as well. Seems to be the system to go with that gets the best of both worlds, especially considering you can get a headache rack with it to work as well. Definitely seems like part of the investment I’d go with
When I was in VT I was on volunteer Dept. Just so you know a bigger EMT kit bag wouldn’t fit that remained a Bach seat item. Love everything else. Still not getting water in it she’s holding up
@@VTMAPLEVIEWFARM yeah not going full sized stat pack again but unsure what I’ll get. I’m only a little south in CT. Biggest thing for me is lighting mounting and things if I put a back rack on. Definitely something to consider
Great video! That being said, I would like to see an install video. Also i would like to see what other options and configurations available, that being said you did a great job showing the one you bought. If you ever do another video on this like a year later and hiw it held up i would watch it, that being said please cut back on the "that being saids"
It's funny how people from out of state are generally suprised when they learn many vermonter cary a pistol. Do another video! Anything just to get the ball rolling for 2022!
I just bought a 2020 GMC Sierra 1500 and am seriously considering the Decked System. Glad that you showed that the bed cargo lights and top tie downs are still usable with the deck is installed. I was wondering about that. I can live without the driver side hand grab as well. Great video. Thanks.
Just got my Decked installed on my 2021 Silverado High Country Crew Cab & kept the driver side handle by carefully trimming away the plastic corner to keep the Amo cover in-tacked! Very happy with the fit & finish. I also left the Bed Rug under the Deck, and using a flush box cover over the whole thing. Planning on using a Kodak Canvas Tent Camper which fits on top of everything.
Adding … I just got this upgraded cover for my truck, which work better when using that Kodak tent for camping. My other cover (Tri-fold) just wouldn’t be able to do it’s job with the tent camper. It came yesterday & mounts on the inside of the box rails. ua-cam.com/video/7VjBVX5NETI/v-deo.html
I might consider getting this for my Truck, but only if they can do customizations such as a shorter length version for Trucks that want to keep their Truck Boxes, Also be able to allow the option for 1 Large drawer instead of 2 separate drawers. This would be far more accommodating for all kinds of applications and purposes... Just a friendly suggestion.
@@VTMAPLEVIEWFARM I'm in a 2018 Silverado 1500 Z71 and a 2003 Siverado 1500 Z71 - The 2018 has the short bed with the Truck Box while the 2003 has the 6.5 bed.
If anyones looking to get the decked system and your planning on running a canopy or a topper over it, I would skip the decked drawers and get something else, there are a lot of cons to the decked system but the major pros are (A) its water proof, (B) you can load a literal metric ton on top of it, but you for the foot of reduced bed space the drawers really aren’t that big, and they are shaped weird too, much better off just making some cheap plywood drawers if your running a cap
Question: With the drawers empty, is it easy to remove them completely? Thanks for this review. I'm considering the same system and real reviews help a lot.
I bought a Gladiator with it already installed. I like them and they are very handy, but..... they are over priced and come with some cons. One, I mentioned the price. Two, it takes up the lions share if not the whole bed. Three, while it’s easy to remove. It’s not easy enough to do it on a consistent basis. Four, The space it takes up isn’t given back completely. You do loose square footage just from it;s footprint. Last, I don’t see much for additional add-on kits, enhancements or features to extend its use. Do not get me wrong I do like it and find it pretty handy, but every time I use it I think to myself. Is it truly worth it? Just from the fact I can’t shake that from my mind tells me I’m not 100% sold. Tack on it’s price and it becomes an ever harder sell.
I agree it has to be a conscious decision that your willing to give up that bed space. For me I prefer the dry storage without a cap so it was worth it. Thanks for the input T B
yours fits better than mine. i have a half inch gap between the drawer and the top of the system so mine leaks like a sieve. it doesn't even keep 80% of the water out. i have to empty the drawers to go through a car wash and shop vac them dry after... its my one main gripe with the system
@ John G. That would be a no go for sure. Have you contacted Decked.... there’s absolutely something wrong. The whole point is it’s water proof? I’d be curious what they have to say.
@@VTMAPLEVIEWFARM yeah they said there will always be water that makes its way in since the front of the drawers dont have sealed ingress protection. They also have some fatal design flaws in the ammo cans at the back. I went through a car wash one day only to have one of the can lids and the contents of that ammo can go flying off into the car wash. the air pressure from the blow dryers broke the clasps on the lid right off and decked tells me "you must remove the ammo can lids to go through a car wash because the clasps aren't rated to take the force of the air dryers" whats the point of having those ammo cans if i have to empty them completely out just to wash the car... dont get me wrong its easy to see a few complaints like this look like the whole drawer system is a bad experience but its not. I actually like my decked drawers a lot as they really help me keep tools and job site supplies organized, i keep conduit, junction boxes uni strut etc in my one wider drawer and the long items sit in the recessions on the dividers perfectly leaving room for hand tools and such underneath and my drill, impact driver and wireless angle grinder fit perfectly in the other drawer in their soft bags. its great system that DOES work well for me, but truth be told, im looking at getting a hard shell top or at least a tonneau cover to keep the elements away. i keep towels stuffed in the front of the drawers to keep the tools dry and thats really my biggest gripe. if they did a little better job with ingress protection it would be 5 stars for me, but the moisture inside and the thing with the ammo cans (which by the way also arent waterproof, i had to drill out drain holes into mine after the first few rains) it just knocks like a star and a half off for me in the long run. Its always situational, ill go weeks or months with no moisture issues then one day ill open the drawer on a job site and all my cutters and strippers are rusted shut. replacing All of those tools adds up over time
Not worth it if it doesn't lock! All this fancy s*** and they can't even put a locking system on it. Just drop the tailgate, pull out the drawers, shop for a couple seconds and run. At least make it resistant to " grab and go "!
Why do you like Decked? Let me know below!
Just a quick tip, I ran a very small bead of silicone around the rim on my decked Ammo boxes, I taped it off first to get very clean lines, removed the tape before it dried, let it full dry before reinstalling the lids, not one drop of water has made it in.
Awsome tip IrishSavage87
I’m a Florida Building Contractor and purchased a Decked a while back for my 2010 F250 and been working with it a while now and have a few recommendations for the company.
The seal around the inside of the bed isn’t a tight fit so things fall between the gaps at the front and side, so I recommend additional cap access plates like you did for the pillars so you can extend the drawers out and use a hose to wash out under the Decked. Secondly the drawers are so deep and accessing anything further than 3/4 of the way back is difficult without removing everything in front of it. Perhaps a roller tray upgrade that would allow the items in the back to slide forward instead of trying to get the bins lifted over the divider rails and brought forward. I keep air tools further forward and accessing them when needed is harder when I have to lift them up slightly and pull them forward because a good portion of the drawers are still under the Decked top piece. In the Florida sun that plastic also gets a bit soft from the heat and noticed middle fasteners are spongy. Just my thoughts to help them make an even better product
Ok, just a shout out to the guys at Decked, I seriously pushed the limits for your product on Saturday. Pouring a little concrete on a job and had Home Depot fork lift 45 bags of 60lb. Sakrete on top of my decked system, handled it like a champ! 2700 plus pounds! ! I was impressed, the F250 dropped a few inches but the Decked held strong!
Easy 2.5 hr job solo, I ended up using 1 tool box and no dividers. Locks are nice added security, worth the money. Holds a LOT of gear.
Thanks for the concise VT centric review for another VT AT4! Looking forward to getting my rig more organized!
Great review! Thanks for the incredible detail! Looking to get one for my Silvarado soon! Thanks man!
The Decked System has been awesome for me. I combined it with a Leitner ACS rack and boxes on my F-150 to fit my outdoor lifestyle: workin' and playin'. Had it since I bought with my 2017 F-150 and have never regretted getting it. Plus Made in 'Murica.
Steelhead Ranger hey What’s your thoughts on the Lietner system. Worth the$$$. Looks like a win
@@VTMAPLEVIEWFARM I has been for me. Between the decked drawers and the Leitner boxes, most of our camping gear is on the truck. The rack holds our roof top tent as well. Whether I am fly fishing (including my pontoon boat or kayak), upland bird hunting (the drawers keep my O&U shotguns and shells safe and out of sight, kayaking (paddles and PFDs plus other gear fit well in the long box), camping (kitchen & camp gear, hiking packs in the boxes), or helping a friend out on the ranch (chainsaw, Dewalt tools, etc)I have most of the gear in the drawers or boxes and little in the cab or on the bed unsecured (the kayak or pontoon boat mostly). No regrets. I got sale prices from Rack Outfitters.
Steelhead Ranger Thank you so much for the reply and all that info. When money permits it’s on my list. 🤙🏻👍🏻
I trust your opinion because your a new englander and are appendix carrying!!!!! 👍👍👍👍🇺🇸
I like how you judge people
Nice review been wanting to get one of these since I work out of my truck.
Looking at getting a pickup again here soon once I’m paid off on my Subaru, and definitely wanted something that would function as an overland vehicle, a first responder POV rig, and something that can carry weight like an ATV as well. Seems to be the system to go with that gets the best of both worlds, especially considering you can get a headache rack with it to work as well. Definitely seems like part of the investment I’d go with
When I was in VT I was on volunteer Dept. Just so you know a bigger EMT kit bag wouldn’t fit that remained a Bach seat item. Love everything else. Still not getting water in it she’s holding up
@@VTMAPLEVIEWFARM yeah not going full sized stat pack again but unsure what I’ll get. I’m only a little south in CT. Biggest thing for me is lighting mounting and things if I put a back rack on. Definitely something to consider
'THAT BEING SAID' nice review hahaha
Decked is made in Defiance, OHIO. They are made of HDPE (High Density Poly Ethylene).
Great video! That being said, I would like to see an install video. Also i would like to see what other options and configurations available, that being said you did a great job showing the one you bought. If you ever do another video on this like a year later and hiw it held up i would watch it, that being said please cut back on the "that being saids"
🤣🤣🤣
Good video 🤙🏽🤙🏽🤙🏽 ordering for my tundra soon
It's funny how people from out of state are generally suprised when they learn many vermonter cary a pistol. Do another video! Anything just to get the ball rolling for 2022!
I just bought a 2020 GMC Sierra 1500 and am seriously considering the Decked System. Glad that you showed that the bed cargo lights and top tie downs are still usable with the deck is installed. I was wondering about that. I can live without the driver side hand grab as well. Great video. Thanks.
Glad it helped. 🤙🏻
It is junk. A poorly designed piece of crap. Do not buy one.
Just got my Decked installed on my 2021 Silverado High Country Crew Cab & kept the driver side handle by carefully trimming away the plastic corner to keep the Amo cover in-tacked! Very happy with the fit & finish. I also left the Bed Rug under the Deck, and using a flush box cover over the whole thing. Planning on using a Kodak Canvas Tent Camper which fits on top of everything.
Adding …
I just got this upgraded cover for my truck, which work better when using that Kodak tent for camping. My other cover (Tri-fold) just wouldn’t be able to do it’s job with the tent camper. It came yesterday & mounts on the inside of the box rails.
ua-cam.com/video/7VjBVX5NETI/v-deo.html
Have the same truck with carbon pro bed, do you think it will fit!?
Great thorough review! Thanks 👍🇺🇸
Love that punisher decal. Awesome video review
Thanks! Subbed you back
I'm looking at getting the deck, i have the same truck. But I'm thinking about adding a tonneau cover what's your thoughts
It should work fine,it’s just going to be a very small space between the top of the system and the cover. Prob 9-10”
Great video. considering this for my GMC 3500. The only thing i dont like is not having the handle to use to step up in the box.
I might consider getting this for my Truck, but only if they can do customizations such as a shorter length version for Trucks that want to keep their Truck Boxes, Also be able to allow the option for 1 Large drawer instead of 2 separate drawers. This would be far more accommodating for all kinds of applications and purposes... Just a friendly suggestion.
I’m sure they’ll keep innovating as the market grows for their system. What truck do you have?
@@VTMAPLEVIEWFARM I'm in a 2018 Silverado 1500 Z71 and a 2003 Siverado 1500 Z71 - The 2018 has the short bed with the Truck Box while the 2003 has the 6.5 bed.
Nice!
If anyones looking to get the decked system and your planning on running a canopy or a topper over it, I would skip the decked drawers and get something else, there are a lot of cons to the decked system but the major pros are (A) its water proof, (B) you can load a literal metric ton on top of it, but you for the foot of reduced bed space the drawers really aren’t that big, and they are shaped weird too, much better off just making some cheap plywood drawers if your running a cap
Cool video alway wanted see how looked in a new gm truck
I need to put an outlet in my bed like that. I thought it was going to be covered.
The system I just ordered was $200 more on sale
Question: With the drawers empty, is it easy to remove them completely? Thanks for this review. I'm considering the same system and real reviews help a lot.
Great review! And for my exact truck! Much Appreciated! Love my Sierra 1500 SLT.
David Lemons - EHS Glad we could help! Thanks for the feedback
I bought a Gladiator with it already installed. I like them and they are very handy, but..... they are over priced and come with some cons. One, I mentioned the price. Two, it takes up the lions share if not the whole bed. Three, while it’s easy to remove. It’s not easy enough to do it on a consistent basis. Four, The space it takes up isn’t given back completely. You do loose square footage just from it;s footprint. Last, I don’t see much for additional add-on kits, enhancements or features to extend its use. Do not get me wrong I do like it and find it pretty handy, but every time I use it I think to myself. Is it truly worth it? Just from the fact I can’t shake that from my mind tells me I’m not 100% sold. Tack on it’s price and it becomes an ever harder sell.
I agree it has to be a conscious decision that your willing to give up that bed space. For me I prefer the dry storage without a cap so it was worth it. Thanks for the input T B
Thanks for the video, very informative.
You’re welcome! Glad we could help!
Good review
I don’t know. I have trouble taking advice from someone who has a Chevy, a jeep, and “appendix” carries at 12 o’clock.😆
That’s cold 😂😂
I hope they have fleet pricing!
Gracias
Saw the handgun in his waistband... I click like. I'm a simple man.
Welcome to Vermont!
That could blow your pecker off carrying like that.
With that being said......
How do these do in a car wash?
yours fits better than mine. i have a half inch gap between the drawer and the top of the system so mine leaks like a sieve. it doesn't even keep 80% of the water out. i have to empty the drawers to go through a car wash and shop vac them dry after... its my one main gripe with the system
@ John G. That would be a no go for sure. Have you contacted Decked.... there’s absolutely something wrong. The whole point is it’s water proof? I’d be curious what they have to say.
@@VTMAPLEVIEWFARM yeah they said there will always be water that makes its way in since the front of the drawers dont have sealed ingress protection. They also have some fatal design flaws in the ammo cans at the back. I went through a car wash one day only to have one of the can lids and the contents of that ammo can go flying off into the car wash. the air pressure from the blow dryers broke the clasps on the lid right off and decked tells me "you must remove the ammo can lids to go through a car wash because the clasps aren't rated to take the force of the air dryers" whats the point of having those ammo cans if i have to empty them completely out just to wash the car... dont get me wrong its easy to see a few complaints like this look like the whole drawer system is a bad experience but its not. I actually like my decked drawers a lot as they really help me keep tools and job site supplies organized, i keep conduit, junction boxes uni strut etc in my one wider drawer and the long items sit in the recessions on the dividers perfectly leaving room for hand tools and such underneath and my drill, impact driver and wireless angle grinder fit perfectly in the other drawer in their soft bags. its great system that DOES work well for me, but truth be told, im looking at getting a hard shell top or at least a tonneau cover to keep the elements away. i keep towels stuffed in the front of the drawers to keep the tools dry and thats really my biggest gripe. if they did a little better job with ingress protection it would be 5 stars for me, but the moisture inside and the thing with the ammo cans (which by the way also arent waterproof, i had to drill out drain holes into mine after the first few rains) it just knocks like a star and a half off for me in the long run. Its always situational, ill go weeks or months with no moisture issues then one day ill open the drawer on a job site and all my cutters and strippers are rusted shut. replacing All of those tools adds up over time
do i need to upgrade my leaf spring system to account for the weight so the back of my truck won't sag?
No
Just get sumo springs
Pistol in the waist. Awesome
Who doesn’t keep a pistol on them?
With that being said…
And why the gun in you waste😂
Made in Ohio
Not worth it if it doesn't lock! All this fancy s*** and they can't even put a locking system on it. Just drop the tailgate, pull out the drawers, shop for a couple seconds and run. At least make it resistant to " grab and go "!
Many trucks have a tailgate that locks when the truck doors are locked. Drawers can't open when tailgate is closed/locked.
Video clearly states you can but locks as an add on. Think he said $40
Dude you can lock your tailgate
Put that gun away. Rambo
Do you need your gun there to show us how much you love America? OMG