Good review - Been very happy with green/red spring combo - you mention the 3d printed parts for non hydraulic stack, I use M6 (fits over the pin) 8mm high shoulder bushing washers which do a great job of holding the springs in place as I had no access to 3d print.
Hello there the and thanks again for another informative video! Just one question..when you tried the 4 blue rubbers and one brown spring combination, i see you didnt use 3 spacers as simagic recommeds but only 2...is there a reason?
We will fine tune the model then we can share it. We used PLA, after some use there was no deformation around parts. ^d printed parts have a good support around springs and seems like a good load distribution.
You can find the model files on this link. (Makerworld) makerworld.com/en/models/585820#profileId-507022 Bambu and raw stl files loaded on our profile. The users who dont use Bambu Lab printer just click on the right side of the (Green background open in bambu studio icon) and download STL/Cad files. You can find basic insturctions on the link .
Thanks for this great review. Whith every change of pads/springs do you see the same amount of max kg when calibrating? I can only reach 26kg with 8 black rubber pads with my p1000 pedals. So I was thinking of swapping them by those springs.
Selam, G923 güncellenmiş komponentler ile şu an piyada. Güncellemenin amacı Trueforce. Ets2'nin Trueforce desteği yok. Olsa zaten motor titreşimi abs gibi durumlarda geri bildirim sağlardı. Bütçe uygunluğuna göre G29'da tercih edebilirsin. Aktarım sistemlerinden simidine kadar ikiside aynı. İki ürünü de detaylı incelediğimiz bir video linkini bırakıyorum; ua-cam.com/video/Joqb9RjeZvA/v-deo.html
@@eRacingAcademy benim bütçem iyi durumda ama g923 le 29 arasında hassasiyet olsun fren vb olsun bir farklılık varsa alabilirim ama siz herhangi bir farklılık olmadığını söylüyorsunuz dogrumudur
@@gencliktayfasi2862 Videoda herşey açık halde belirttik. Fark G923'ün Truforce nedeni ile güncellenmiş bir işlemci kartına sahip olması dışında ve fren yayındaki değişiklik dışında hiç bir fark yok.
Lmp-Gtp Cars have less travel on the brake. You may want to try on springs; Red and brown, on pad combination blue and red may be you can add 1 or 2 restrictors. This chart can help you; image.simagic.com/profile/upload/2024/06/11/SIMAGIC_P-ORP_Quick_Guide.pdf
abi moza dreksyona sımagıc fren trustmaster el freni takmak gibi bir karşım oluyormu illa bir marka seçip onun üstündenmi yürünmek zorunda. pc toplarken intel işlemciye amd ekran kartı takabiliyoruz mesela aynı durum burdada olurmu ?
Pc platformunda kullanacağınız sim multi kontrolcü desteklediği sürece farklı markalardan ekipman kullanabilirsiniz. Her ürün sonuçta ayrı usb ile pc'ye bağlanıyor. Farklı ürünleri kullanmanın tek dezavantajı (sayılmayabilir), farklı sürücüleri yükleyerek bu ekipmanları kullanmak.(örn; Moza base pithouse, simagic el freni sim Pro manager )
You can find the model files on this link. (Makerworld) makerworld.com/en/models/585820#profileId-507022 Bambu and raw stl files loaded on our profile. The users who dont use Bambu Lab printer just click on the right side of the (Green background open in bambu studio icon) and download STL/Cad files. You can find basic insturctions on the link .
Hi! Sorry to ask this again, but is there any news on the 3D printed part for the springs? I am also waiting on this since the original ones leave a bit to desire...
You can find the model files on this link. (Makerworld) makerworld.com/en/models/585820#profileId-507022 Bambu and raw stl files loaded on our profile. The users who dont use Bambu Lab printer just click on the right side of the (Green background open in bambu studio icon) and download STL/Cad files. You can find basic insturctions on the link .
There are 2 models on the store nov. P-ORP and P-ORP(H). For hydraulic P-ORP(H) is suitable. İt has same springs but pads and the bushings a bit different.
Pc ve Xbox uyumlu; Giriş seviyesi fiyat performans ürünü Logitech G920-G923 (Xbox versiyonu) Giriş orta seviye Thrustmaster TX (T300'ün pc ve Xbox uyumlu modeli) Orta seviye Thrustmaster TSXV (Pedal ayrı satılır) (Ts-Pc'nin pc ve XBox uyumlu versiyonu)
A P-ORP guide certified by SIMAGIC😉
Awesome video! We can't appreciate it enough 💯
An absolute pleasure 🙏 Glad you like it ✌️ More will come...
Wonderful detailed explanation. Thank you.
Glad it was helpful!
Good review - Been very happy with green/red spring combo - you mention the 3d printed parts for non hydraulic stack, I use M6 (fits over the pin) 8mm high shoulder bushing washers which do a great job of holding the springs in place as I had no access to 3d print.
Thanks for the info! have a great drive mate.
Hello there the and thanks again for another informative video!
Just one question..when you tried the 4 blue rubbers and one brown spring combination, i see you didnt use 3 spacers as simagic recommeds but only 2...is there a reason?
Thanks for this.
Do you have link to the 3D model you used for printing? And which plastic did you use, PLA? Any visible damage so far?
We will fine tune the model then we can share it. We used PLA, after some use there was no
deformation around parts. ^d printed parts have a good support around springs and seems like a good load distribution.
You can find the model files on this link. (Makerworld) makerworld.com/en/models/585820#profileId-507022
Bambu and raw stl files loaded on our profile.
The users who dont use Bambu Lab printer just click on the right side of the (Green background open in bambu studio icon) and download STL/Cad files.
You can find basic insturctions on the link .
Thanks for this great review. Whith every change of pads/springs do you see the same amount of max kg when calibrating? I can only reach 26kg with 8 black rubber pads with my p1000 pedals. So I was thinking of swapping them by those springs.
Pressure depens on what is your pad-spring-restrictor combinaton. Try with 1 spring and 4 pads first.
@@eRacingAcademy Will try that. Thank you 👍
Abi CAMMUS LC100 pedals mı Moza srp mi bide ikiside çok pahalı 2x para vermeden alabileceğim bir yer var mı
sa kral ben de almayı düşünüyorum ama ben euro truck simulator 2 ağırlıklı oynamayı düşünüyorum g923 önerirsin yoksa g29 mu
Selam,
G923 güncellenmiş komponentler ile şu an piyada. Güncellemenin amacı Trueforce. Ets2'nin Trueforce desteği yok. Olsa zaten motor titreşimi abs gibi durumlarda geri bildirim sağlardı.
Bütçe uygunluğuna göre G29'da tercih edebilirsin. Aktarım sistemlerinden simidine kadar ikiside aynı.
İki ürünü de detaylı incelediğimiz bir video linkini bırakıyorum; ua-cam.com/video/Joqb9RjeZvA/v-deo.html
@@eRacingAcademy benim bütçem iyi durumda ama g923 le 29 arasında hassasiyet olsun fren vb olsun bir farklılık varsa alabilirim ama siz herhangi bir farklılık olmadığını söylüyorsunuz dogrumudur
@@gencliktayfasi2862 Videoda herşey açık halde belirttik. Fark G923'ün Truforce nedeni ile güncellenmiş bir işlemci kartına sahip olması dışında ve fren yayındaki değişiklik dışında hiç bir fark yok.
Is there a combo for GTP cars on iRacing?? or Would that fall under GT3?
Lmp-Gtp Cars have less travel on the brake. You may want to try on springs; Red and brown, on pad combination blue and red may be you can add 1 or 2 restrictors.
This chart can help you; image.simagic.com/profile/upload/2024/06/11/SIMAGIC_P-ORP_Quick_Guide.pdf
abi moza dreksyona sımagıc fren trustmaster el freni takmak gibi bir karşım oluyormu illa bir marka seçip onun üstündenmi yürünmek zorunda. pc toplarken intel işlemciye amd ekran kartı takabiliyoruz mesela aynı durum burdada olurmu ?
Pc platformunda kullanacağınız sim multi kontrolcü desteklediği sürece farklı markalardan ekipman kullanabilirsiniz. Her ürün sonuçta ayrı usb ile pc'ye bağlanıyor.
Farklı ürünleri kullanmanın tek dezavantajı (sayılmayabilir), farklı sürücüleri yükleyerek bu ekipmanları kullanmak.(örn; Moza base pithouse, simagic el freni sim Pro manager )
Thanks for this video. Very helpful. Do you happen to have the 3D print files for the spring washers?
Glad it helped. We refined the parts, just need to do test print and share them soon. i will get back to your message when its all ok.
@@eRacingAcademy Perfect - thanks!
You can find the model files on this link. (Makerworld) makerworld.com/en/models/585820#profileId-507022
Bambu and raw stl files loaded on our profile.
The users who dont use Bambu Lab printer just click on the right side of the (Green background open in bambu studio icon) and download STL/Cad files.
You can find basic insturctions on the link .
How well would you recommend the P-ORP kit without the 3D printed spacer??
3d printed parts (spacers) have no huge impact on the performance. They just keep the pads or springs well aligned.
Hi! Sorry to ask this again, but is there any news on the 3D printed part for the springs? I am also waiting on this since the original ones leave a bit to desire...
Sorry for being late. ill inform you under this message tomorrow. We will sher the files on makerworld soon.
You can find the model files on this link. (Makerworld) makerworld.com/en/models/585820#profileId-507022
Bambu and raw stl files loaded on our profile.
The users who dont use Bambu Lab printer just click on the right side of the (Green background open in bambu studio icon) and download STL/Cad files.
You can find basic insturctions on the link .
@@eRacingAcademy Thanks, awesome work! To print we go eheheh
Work on hydraulic?
There are 2 models on the store nov.
P-ORP and P-ORP(H).
For hydraulic P-ORP(H) is suitable. İt has same springs but pads and the bushings a bit different.
moza'ya 2x para vermeden alabileceğimiz bir yer var mı?
Alım esansında Distribütör garantili olmasına dikkat edin.
Abi Xbox için hangi direksiyon setlerini önerirsin
Pc ve Xbox uyumlu;
Giriş seviyesi fiyat performans ürünü Logitech G920-G923 (Xbox versiyonu)
Giriş orta seviye Thrustmaster TX (T300'ün pc ve Xbox uyumlu modeli)
Orta seviye Thrustmaster TSXV (Pedal ayrı satılır) (Ts-Pc'nin pc ve XBox uyumlu versiyonu)
Shouldn't the harder spring be at the bottom?
As in the cover image, the bottom springs are stiffer. The compression is done from the top.
@@eRacingAcademy Right. I asked because at 4:50 you put the brown spring on top.