Truck looks incredible man. Impeccable taste. Classy without over doing it. The only thing I personally would of done was black out the emblem with leaving the chrome around it. Along side not blacking out badges. I’m a fan of the badges popping and emblem outline popping
@@armandobustos14 hey brother what size tires and the 2 inch leveling kit do you have can you put that in the description or send it to me I have exactly same truck I want something like yours looking have stock as possible
Goes to show u dnt even need to buy expensive wheels to change the appearance of ur truck.. A set of Ridge Grapps and sum spacers completely made this truck look more aggressive.
285/55 is smaller than stock 275/60. Gave up 3/4" of height for less than 1/3" of width. Should of gone with 285/60 with a 1 inch spacer. 33x12.5 would've probably fit with a 1 inch spacer and given similar poke.
hey i just got the same truck but in white. i want to do the leveling kit. so what leveling kit did you get ( spacers or the whole shock?) btw you truck looks super nice, i what that stance/look.
Love Your Setup Man... Just bought my 2021 GMC SIERRA 1500 Elevation a week ago. Like the 2 inch Leveling Kit you did. Thinking I'm going to do 1 or 1.5 inch wheel spacers so they possibly don't rub. Going with Nitto Ridge Grapplers as well.
Great looking truck brother looking to pick mine up in two weeks and after looking at this video im going to get aleveling kit and bigger tires for sure
I have the same truck but a 2021 with the 285x60. I just ordered a 3.5 inch lift kit. I want to add spacers for poke with stock rims. Do you think I will have to trim? Not sure to go with 1 or 2 inch spacer.
Just what i wanted to do with mine. I am not fan of spacers wonder if 1.5” would need cutting? Mine is 2024 off road wonder if i need to level mine as well?
This truck is immaculate. I'm getting ready to add two-inch spacers. Have you had any issue with the wheel spacers so far? And do you have to check them periodically? Thanks in advance!
Dude that is one beautiful tuff looking truck. Im going to order one just like it for my upcoming retirement truck. Was going to order the new 3.0 LZ0 diesel now they're talking diesel shortages thanks to this administration i digress. So my new build is in limbo because of fuel shortages.
I didn't, I'm betting if I did 1.5 it would probably barely make it. But when I was ordering them it showed 1.5 didn't fit my truck and 2 did so I just went with two
I haven't liked or needed a pickup since I was in my 20s. Personally I think they are a waste unless you use the bed everyday. With all that said I wasn't a fan of pickups since my 20s until the Raptor was released. I became a fan of pickups again. With all that said your truck is bad ass dude. Very nice. That truck would turn my head going down the road.
Loved this video. Looking to get the exact truck and color. This video helped me a lot on knowing what I want to do. Congrats sir, super nice truck, enjoy it.
I did it and I wouldn’t recommend. My truck looked almost the same. I would go with a 4” or 6” lift instead. Just my personal opinion. I still like how the one in the video looked, just not on mine
Looks sharp. I have an black ‘19 AT4 and I plan on going similar to what you’ve done but I think I wanna keep the red….black out the chrome on the badges but keep all the red in the GMC logo I’ve already painted the exhaust tips black. So, do you think a 295 would fit with no spacers?
Looks great. I have a 2022 Denali in black and black out and want to do the same thing and level it and keep the stock rims and add the Grapplers just like you did. My concern is related to the spacers and messing up the ride. Drives great now and spacers gnerally make for a rough ride. Curious what your experience was before and after related to the ride. Thanks.
Did you ever do the upgrades to your truck? I have a black 2023 Denali and I am wanting to add New tires on the stock 20” rims. Had the nitto ridge grapplers on my previous Silverado ltz.
Nah - haven't done it yet. Figured I would wear out the tires I have first then consider the upgrade. The Denali drives real nice stock and honestly I'm afraid that adding the spacers at grapplers could totally change the ride.... but prefer the slightly more aggressive look that Armando did.
Any plans to do UCA’s? I’m on the fence about 2” level because of the issues guys are having with the ball joint in stock arm. I have a 1” level firm dealer. Ordered 1.5 inch spacers the other day but the 2” you have look good.
I put inch and a half on mine and my standard 275-60-20 rub against the mud flap on the front. I removed them and they still hit the wheel well. Just ever so slightly. Do you recommend removing the spacers? or do you have another option? Thanks for your advice! -Shane
I pretty much mirror your set up but i am rubbing and my guest that is with the UCA. I have same tires 285/60/20 and it rubs when reversing and turning otherwise is does not. U think the spacer will eliminate that?
A arms next.. I have the standard bed 23' 3.0 blak'd out Nice truck indeed. 2" spacers though gotta go. -40mm offset rims.. gonna follow, keep making vids!
I currently own a 2017 All Terrain X. The AT4 is the new version of this truck. Had planned to buy the new blacked out AT4 but due to the price I settled for the Elevation with the Premium and X-31 off road package. it will look just like your's in the Onyx Black and all blacked out including the GMC Emblems. I just recently ordered the 2024 model. The one disappointment on the interior of the truck is that GM cheaped out on the front passenger seat. It is not power adjustable. This means you can't adjust the height for a shorter person. I guess a feller can't expect to get 2 power seats when you only pay 80 K for the truck. Now it's a waiting game.
That's a very nice truck bro, I really like it. I think it looks great the way you have it. I just sold my ram because it was killing me on gas due to my 6in lift and tires. I plan on getting an AT4 sierra next. Just wish GMC could add the moon roof like the ram.
Beautiful truck. I have a 2021 elevation and im going for the same look. Whats the exact tire size you went with? Im literally in the custom offsets webpage RN😂 Much appreciated brother!
The Nitto Ridge Grapplers that I got are $425 each a tire, and then the leveling kit I got was about $500. Labor to put the leveling kit on from shop was $150 dollars
There are cheaper tires about the same design, but I wanted the nittos, been a fan of them but you can find cheaper options. The tires is what cost alot of $$
This is the Elevation Trim, the all black grill comes with it, my GMC logo was red but I plasti dipped it black. But GMC does offer it black already with a gloss trim if you get it from them
I just got an AT4x on Friday but they didn't have an all black out option. It actually didn't have a ton of extra options to add to it but it's a beast. Good looks on your truck man
I have the same setup I'm thinking about putting 33 thedealership says 285 is the biggest I can put on it. Any suggestions, I'm looking at BF Goodrich k02
Hi there, I’m new to the truck game and I like the way your level turned out. Can you provide the link to the level you used? Also, the rear hight is stock, right? Thanks in advance
Awesome looking truck. I just got an AT4 and I’m doing research on different mods. It already has a 2” lift which is all i want. I like the leveling idea. Might do some spacers too. Maybe just 1.5”. Probably do a grill overlay maybe some grill lights too.
I got the 2inch lift along with getting new tires put on at the same time, I had a company do the 2inch leveling kit for me. But I don't believe it would have rubbed
Truck looks incredible man. Impeccable taste. Classy without over doing it. The only thing I personally would of done was black out the emblem with leaving the chrome around it. Along side not blacking out badges. I’m a fan of the badges popping and emblem outline popping
Check out new video!
@@armandobustos14 hey brother what size tires and the 2 inch leveling kit do you have can you put that in the description or send it to me I have exactly same truck I want something like yours looking have stock as possible
@@alex4k446 Dude, did you even watch the video? He literally answers both of your questions in the video.
Didnt say what brand though @@djdmac2417
Goes to show u dnt even need to buy expensive wheels to change the appearance of ur truck.. A set of Ridge Grapps and sum spacers completely made this truck look more aggressive.
one of the best looking truck i have seen so far.. good job.. nothing too crazy
285/55 is smaller than stock 275/60. Gave up 3/4" of height for less than 1/3" of width. Should of gone with 285/60 with a 1 inch spacer. 33x12.5 would've probably fit with a 1 inch spacer and given similar poke.
...or 305/55/20 with 1 - 1.5" spacer
Sweet Blackout Truck! I just ordered the 2024 Duramax 1500 Silverado Black Out with Fuel Wheels.
hey i just got the same truck but in white. i want to do the leveling kit.
so what leveling kit did you get ( spacers or the whole shock?)
btw you truck looks super nice, i what that stance/look.
Love Your Setup Man... Just bought my 2021 GMC SIERRA 1500 Elevation a week ago. Like the 2 inch Leveling Kit you did. Thinking I'm going to do 1 or 1.5 inch wheel spacers so they possibly don't rub. Going with Nitto Ridge Grapplers as well.
Did you do the smaller spacers?
Any rub?
WHAT A BEAUTIFUL TRUCK!
Great looking truck brother looking to pick mine up in two weeks and after looking at this video im going to get aleveling kit and bigger tires for sure
Great look! I was just looking into a leveling kit and trying to decide what size tires. This is a great reference.
I have the same truck but a 2021 with the 285x60. I just ordered a 3.5 inch lift kit. I want to add spacers for poke with stock rims. Do you think I will have to trim? Not sure to go with 1 or 2 inch spacer.
I’ve heard 2 inch spacer not recommended since lugs could potentially damage or break. Feedback?
How’s the drive?
Wheel size?
Have you had any issues with the spacers? How was the ride before and after?
I just got mines today i got 285/55/20 and leveling kit just like you,im waiting for my 1.5 inch wheels spacers,i have the 2020 gmc sierra 1500
Do the tires rub
No problem at all with the tires rub with 1.5 spacers😃
What type of leveling kit did you use? The one above the shock or under the shock
Just what i wanted to do with mine. I am not fan of spacers wonder if 1.5” would need cutting? Mine is 2024 off road wonder if i need to level mine as well?
Mine looks almost identical only difference is mine has red tow hooks, electric steps and bed cover. Badass set up so far brother
I want my 2024 to look exactly like that one...maybe not those tires but they do look nice...the overall look is frickin badass bro
Looks very nice man! Buying one soon and going with the rough country 3.5” and same tires as yours in a 295/60r20 🤙🏼
Did you get the tires? Wondering If any rubbing or modifications? I have the same truck but was thinking putting 285/60/20 or 295/60/20
I Love the truck. You mentioned you leveled it. What did you use to Level it.
I’m curious if these would rub on stock height without spacer, they’re shorter in height and only about 3/8” wider from stock tires
Looks awesome did it change the way it drives / rides?
hey bro - which leveling kit do you have? also what size tires? thank you!
beautiful truck exactly what I'm looking for retiring next spring this will be my retirement truck waiting on the new LZ0 to come out.
How they ride bro? I just bought the same truck I’m looking for some mean tires
Looks perfect classy.I have 295/55/20 on mine
Check out new video!
This truck is immaculate. I'm getting ready to add two-inch spacers. Have you had any issue with the wheel spacers so far? And do you have to check them periodically? Thanks in advance!
A truck should be immaculate it should be putting in work not sitting on the pavement all day looking shiny draining bank accounts.
If it’s not your bank account.. mind ya bidnessss!! 🤷🏻♀️
@evenl889 why would you assume it drains bank accounts?
Also if I bought a corvette is it meant for racing? To each his own bud.
Whats the size of the tires? I bought a 2024 Gmc Sierra Elevation and want to get tires like these💯
Does this fit in your garage?
Did gmc put on the leveling kit? I have a new at4 in white I wanted to make it a bit more aggressive.
Dude that is one beautiful tuff looking truck. Im going to order one just like it for my upcoming retirement truck. Was going to order the new 3.0 LZ0 diesel now they're talking diesel shortages thanks to this administration i digress. So my new build is in limbo because of fuel shortages.
Why did you need the 2” wheel spacers? Because of going from 275 to 285? Thanks 🙏🏾
Good looking truck, Did you try with 1 or 1.5" spacers to see if there was no clash with the mud guards?
I didn't, I'm betting if I did 1.5 it would probably barely make it. But when I was ordering them it showed 1.5 didn't fit my truck and 2 did so I just went with two
I haven't liked or needed a pickup since I was in my 20s. Personally I think they are a waste unless you use the bed everyday. With all that said I wasn't a fan of pickups since my 20s until the Raptor was released. I became a fan of pickups again. With all that said your truck is bad ass dude. Very nice. That truck would turn my head going down the road.
Check out new video!
@@armandobustos14 with the 2 inch leveling kit will it fit in your garage?
Loved this video. Looking to get the exact truck and color. This video helped me a lot on knowing what I want to do. Congrats sir, super nice truck, enjoy it.
Update?
I did it and I wouldn’t recommend. My truck looked almost the same. I would go with a 4” or 6” lift instead. Just my personal opinion. I still like how the one in the video looked, just not on mine
@@phillipalvarez825I was doing this mod next week. Everything the same. So you're saying the truck looks the same? I have a black X31 Elevation.
Nice looking truck. What running boards are you using?
Looks Great! Perfect level. And perfect tire size.
Are those the stock Elevation rims or are they the AT4 rims powder coated black?
Does your truck have 360 camera? Was that from factory or did you install it?
Looks sharp. I have an black ‘19 AT4 and I plan on going similar to what you’ve done but I think I wanna keep the red….black out the chrome on the badges but keep all the red in the GMC logo I’ve already painted the exhaust tips black. So, do you think a 295 would fit with no spacers?
What leveling kit did you use and what did it cost you? I'm interested in doing something similar to my new elevation
Rough Country 2 Inch Leveling Kit $435
@Armando did you get the Rough Country 2" Loaded N3 Leveling Struts
Did you add control arms to your leveling kit?
Man I got a 2015 Toyota Tundra and I’m ready for an upgrade and seeing this makes me want to switch 👍👍 nice truck
My tires is 275/60r20 bfgoodrich all terrain
Did you know if need do anything on my truck?
I like yours and i thinking to do the same with mine
Love the truck man . Getting mine ready also
Looks great. I have a 2022 Denali in black and black out and want to do the same thing and level it and keep the stock rims and add the Grapplers just like you did. My concern is related to the spacers and messing up the ride. Drives great now and spacers gnerally make for a rough ride. Curious what your experience was before and after related to the ride. Thanks.
Did you ever do the upgrades to your truck? I have a black 2023 Denali and I am wanting to add New tires on the stock 20” rims.
Had the nitto ridge grapplers on my previous Silverado ltz.
Nah - haven't done it yet. Figured I would wear out the tires I have first then consider the upgrade. The Denali drives real nice stock and honestly I'm afraid that adding the spacers at grapplers could totally change the ride.... but prefer the slightly more aggressive look that Armando did.
Thats a clean looking truck. Great setup.
Any plans to do UCA’s? I’m on the fence about 2” level because of the issues guys are having with the ball joint in stock arm.
I have a 1” level firm dealer. Ordered 1.5 inch spacers the other day but the 2” you have look good.
Hey love your truck do you know how much all the upgrades you did to it would be?
Can you tell me which wheel spacers you had put on for your truck. I'm trying to find some and having trouble with it being a 2022
Absolutely
FLYCLE 2 inch 6x5.5 Hubcentric Wheel Spacers for Chevy GMC Silverado Sierra 1500 Tahoe Suburban Avalanche Yukon Escalade, 4PCS 6x139.7mm Wheel Spacer with 14x1.5 Studs & 78.1mm Bore
Got them on Amazon. Best rated
awesome truck man
That's a gorgeous truck my dude
Looks great. Wish my ‘24 AT4 came with black wheels.
I put inch and a half on mine and my standard 275-60-20 rub against the mud flap on the front. I removed them and they still hit the wheel well. Just ever so slightly. Do you recommend removing the spacers? or do you have another option?
Thanks for your advice!
-Shane
Do you have a level kit on your truck as well, or just the wheel spacers?
What (if any) size wheel spacers will I need if I put 305s on my 23 sierra 1500 SLT with a 3.5” lift ?
You can go with 305 55 r20 with 2 inch leveling kit
Yer truck screams give me the big boy mirrors daddy,I need em.
Lmao!!
Mine is a 14,but once I got a pair from amazon,I love lookin back,and it looks so much tougher.
I pretty much mirror your set up but i am rubbing and my guest that is with the UCA. I have same tires 285/60/20 and it rubs when reversing and turning otherwise is does not. U think the spacer will eliminate that?
Does your truck have any lifting or leveling? Spacers would make the rubbing worse.
Is leveled with RC 2 inch leveling kit
The gmc logo did you replace it to glow at night or how did you get that done. I'm looking into getting me a pickup truck
I have the exact same one they sell this light up emblems for the 5.7 on both sides l and that look great and very easy to do
Looks great. Add a small antenna and add lights to the multifunction tail gate
what type of sidesteps do you have on the truck
How are these on the highway?
A arms next.. I have the standard bed 23' 3.0 blak'd out
Nice truck indeed. 2" spacers though gotta go. -40mm offset rims.. gonna follow, keep making vids!
I think that is a great looking truck , i would love to have it
Check out new video!
It still looks like a truck. This makes it a lil more classy, but still rugged. Love it my guy. What is the diameter of the wheels though?
I currently own a 2017 All Terrain X. The AT4 is the new version of this truck. Had planned to buy the new blacked out AT4 but due to the price I settled for the Elevation with the Premium and X-31 off road package. it will look just like your's in the Onyx Black and all blacked out including the GMC Emblems. I just recently ordered the 2024 model. The one disappointment on the interior of the truck is that GM cheaped out on the front passenger seat. It is not power adjustable. This means you can't adjust the height for a shorter person. I guess a feller can't expect to get 2 power seats when you only pay 80 K for the truck. Now it's a waiting game.
How is the ride quality man? Sick truck!
What leveling kit did you use?
I have almost the same set up except I have retractable steps and red tow hooks
That's a very nice truck bro, I really like it. I think it looks great the way you have it. I just sold my ram because it was killing me on gas due to my 6in lift and tires. I plan on getting an AT4 sierra next. Just wish GMC could add the moon roof like the ram.
Did you do the 2” wheel spacers on all 4 tires bro?!
How big are the wheels and tires together? 33s?
with a 2" spacer how much lug bolt do you have left to thread on wheel nuts?
Everything is so tastefully done🔥 Are those tires pretty noisy on the highway?
What tires are those? Can you post the exact model of tires? Thanks!!
Did you have to get longer studs ?
Perfect set up!
Really love the look. Great job!!
Man i really miss the boxy truck look
My friend bought a truck like this and got a lift on it and got the red hooks and people think it’s a gmc AT4 but a cheaper one
Beautiful truck. I have a 2021 elevation and im going for the same look. Whats the exact tire size you went with? Im literally in the custom offsets webpage RN😂 Much appreciated brother!
nice truck. I was against an all black truck, but im starting to like it
I didn’t want to lift my truck so this might be an option cause I want bigger tires and rims, and black. How much did these tires and rims cost?
The Nitto Ridge Grapplers that I got are $425 each a tire, and then the leveling kit I got was about $500. Labor to put the leveling kit on from shop was $150 dollars
In total I paid about $2,400
There are cheaper tires about the same design, but I wanted the nittos, been a fan of them but you can find cheaper options. The tires is what cost alot of $$
Oh and also, I kept the stock rims, only changed the tires! Had I changed the rims it probably would've made the price and extra $1,000.
@@armandobustos14 where did you get the leveling kit from?
hows the road noise levels with those tires?
What trim is this? Was the all black grill and emblems a stock option or aftermarket?
This is the Elevation Trim, the all black grill comes with it, my GMC logo was red but I plasti dipped it black. But GMC does offer it black already with a gloss trim if you get it from them
Check out new video!
I just got an AT4x on Friday but they didn't have an all black out option. It actually didn't have a ton of extra options to add to it but it's a beast. Good looks on your truck man
@@ralphmartinez5717 the good thing is to black out what you want, it's not too hard! I bet that AT4X is a beast!
@@armandobustos14 honestly bro it's more than I even could of imagined. It's for sure gonna make for some adventures
What is the leveling kit you went with?
Sharp looking truck
Can you fit 33s with just a level?
I have the same setup I'm thinking about putting 33 thedealership says 285 is the biggest I can put on it. Any suggestions, I'm looking at BF Goodrich k02
33x12.5 will fit your truck with a 1.5” level kit and will not rub on those stock 20” wheels.
So is it taller?
Hi there, I’m new to the truck game and I like the way your level turned out. Can you provide the link to the level you used? Also, the rear hight is stock, right? Thanks in advance
Did you have to recalibrate the speedo, ABS, traction control, etc. due to the tire size change?
So sir
How’s your ride now?
Awesome looking truck. I just got an AT4 and I’m doing research on different mods. It already has a 2” lift which is all i want. I like the leveling idea. Might do some spacers too. Maybe just 1.5”. Probably do a grill overlay maybe some grill lights too.
Nice! What tires did your AT4 come with? Thinking of changing those? Also 1.5 sounds nice!
@@armandobustos14 275/65/20. Pretty nice for factory wheels/tires.. i doubt I’ll change. Might add some red caliper covers at some point too.
I have a red at4 with a 2 inch leveling kit and 295/70R18 MK3 tires and man does it look nice
@@joec6078 those sound like big tires, any rubbing? And do you have any wheel spacers?
Check out new video!
Beautiful truck
Check out new video!
Check out new video!
Can you post what leveling kit you used ?
Was there any rubbing before you did the 2 inch level?
I got the 2inch lift along with getting new tires put on at the same time, I had a company do the 2inch leveling kit for me. But I don't believe it would have rubbed
Check out new video!
Hey Armando, did you use the same tires sensors on the tires?
No, the new tires came with new sensors and then they reprogrammed them to truck!
Check out new video!
Is this the refreshed truck with the new interior?
Yes it is, all 2022s are refreshed
Did you use plasti dip for the badges?
looks amazing bro!