GONE IN 20 Seconds - Auto Stop Start ALL GM Vehicles
Вставка
- Опубліковано 19 жов 2024
- www.smartstops...
3.0 Duramax Diesel Silverado and Sierra 1500 LM2 LZ0
Incredibly easy product to install ! As an Amazon Affiliate / Influencer, I earn from qualifying purchases. Your support is appreciated as it helps the channel to continue to test products!
www.duramaxnews.com
2021 silverado diesel here, for the people complaining about turning it off every time, to me is no big deal, I just added to the routine of putting my seat belt on and do the auto stop next after my seatbelt every time, and I never forget, got so used to it , it doesn't bother me at all.
I do the same thing after I buckle up.
@@fliperz3777 no, just no. Not ok
This is absolutely the easiest way to disable the auto start. Everything comes in the kit took me 15 minutes to install it.
And with my truck, I did not have to wait eight hours for a power down. It started instantaneously.
Have it installed for two months… absolutely wonderful.
Confirm it’s easy to install. Too simple.
Confirm that it never misses a beat.
Seems like a great product, but for $140 I think I’ll be fine with turning off the auto switch every time I get in the truck.
😂 I agree lol
Yep! And when I forget, I get reminded at first stoplight lol
Cheers!
@@philipchesley9615 That's the point, so you don't get annoyed ever again.. for years of ownership. Its worth the $ for peace of mind.
That’s something that probably cost $10 to make in Guangdong China.
Yeah, not for that price. I will push the button.
You heard about that from me on the ZR2 forum. Love this thing!
HA HA, NICE !!! you're the real hero !
Just installed yesterday on a 2024 Colorado Trail Boss... works great... near effortless Just remember slide the red lock back on the plug and pinch it with plyers and it comes right off.
I just ordered one for my wifes 23 yukon! I hate the start stop feature. I didn't feel like taking apart the dash either. Thanks!
Make sure it doesn’t effect your warranty
The auto stop start eliminator that’s available for the Yukon is super easy to install and better than this. The dash panel pieces easily come by hand in a matter of seconds.
@@DennisDuffy-n8gI don’t know how it could
I am with you 1,000% my wife and I fight about that every time I drive my truck..it annoys me to no end!!
I installed the auto stop start eliminator behind the button in my ‘22 Yukon. Best $90 I’ve spent in a while.
Why? You enjoy burning more fuel at stop lights or something? I don't get it.
@@gumenski I don’t enjoy damaging my engine. Also, it’s a safety hazard.
@@AnontheGOAT HAHAHAHAHAHA... that was funny. Seriously though, why did you put it on again?
@@gumenski Ask your wife.
@@gumenski if you don't know, than you would not understand when you were told why.
That’s a nice option versus removing console and lower dash. I put the behind the dash version eliminator on my wife’s 23 Suburban but it was to the left of the steering wheel and simple to access.
Absolutely ridiculous to do any of this. Just tap the on/off button for the stupid auto stop feature which is on the dash each time you start up the engine. Surely you do not think that is a difficult thing to do. Right?
JUST got it for my '24 Colorado Z71, thanks for the link and info video!
Just installed this. Works great!
Was a little worried I could not drive for 8hrs after plugging in but directions allow it to be ran if needed. It just has to sit for up to 8hrs to work. Drive it if you need to.
It worked flawlessly! Thanks for sharing!
I found one for my ‘21 Malibu. It was $15 on Amazon. Just a jumper about 6” long and the plug in question is under the hood next to the latch.
2021 GMC AT4; put the switch that goes behind the center console two years ago. For me it was a safety concern, I pull up to a stop (usually for a right turn) then the truck shuts off when I want to make the turn and accelerate. If your trying to merge into traffic with a vehicle that cycles off then has to restart? There are many right turns with merging lanes in my area with a vehicle that shuts down ain't fun.
Doesn’t the AT4 have a shut off switch?
That's strange. My 2024 GMC starts the engine before I can even lift my foot off the brake, let alone move it to the throttle. Maybe you should have taken it in to be looked at instead of putting mods on it?
@@gumenski maybe your reaction time is to slow from brake to throttle, so it works for you, not for the normal people who react faster between pedals.
@@BR549_o7Right.. what would I know being a race car driver.
@@gumenski does not mean your successful at it. There are plenty of "race car drivers" that are clueless. Bottom line, these switches are to stop the engine from shutting down everytime you come to a stop. All that constant stop start can't possibly be good in the long term. If you were a good race car driver, you would realize this.
I just installed one on my 24 Sierra Denali, That dam thing drove me crazy. On my 2018 SLT they called it a hybrid, had a huge battery and the start stop just shut the vehicle down and it was like it held it in a pause mode, when I let off the brake it just went again, no starting. I liked that one but I was more than happy to spend the money to eliminate that starting on this /24
Yep, works great and installed in a few minutes.
Great to hear!
AWESOME find! Would love to that the 1/2 ton diesel really nice truck!
Thanks !
So that wire on the battery that you hooked your device to I have seen on other videos that, that wire monitors your battery charge level to ensure that your vehicle has enough charge to restart, if it doesn’t have enough charge then it won’t shutdown. So if you just disconnect that wire it shouldn’t shut down. Due to your battery is no longer being monitored. I haven’t personally tried this and I don’t know if it will throw a code as a result of the disconnection, but it wouldn’t hurt to try.
Lol it's a habit now soon as I start I hit button done 😂
Definitely need this installed because if not it is hard in your engine and starter and battery to keep starting, I get it your trying to save fuel but there is an extent.
Virtually every vehicle with auto-stop has heavy duty starters AND batteries that are far better than the average ones on a regular car. Engineers aren't complete idiots, believe it or not.
For me, I just make it a habit of going from the start button to disengaging the stop/start feature. Total cost: $0.00. And it cuts down on two things . . . the level of aggravation and the number of times the car starts over the engines expected life.
Much easier to install for sure.
If you were to ever have funky electrical system gremlins popping up , beware that aftermarket add on's causing diagnostic trouble shooting time will NOT be warranty covered ,especially if they cause a component failure of some kind , they will totally void the entire vehicle warranty coverage
That is not remotely true. If you have an electrical issue that the add on part is causing then the repair would be at your expense, but the rest of the vehicle would be warrantied.
@@jimbearden7704depends on the component. Mess with the ECU in any way and your entire power train warranty goes. Along with electrical work
Magnuson Moss Act says something completely different.
@@jimbearden7704 Hacking the battery management system
They got greedy with that price point. I’d buy it all day for $40. $140? No way in hell. It’s just not that big of a nuisance.
Ever consider just not pushing the brake pedal down far enough to engage the auto start stop? My Chevys rarely engage until I'm at a stop and sometimes not even then since I don't "hit" my brakes at a stop sign or light, and auto start stop doesn't have any effect when you're rolling. Also helps if you let off on your brake right as it's coming to a stop to prevent the vehicle from jerking suddenly when it comes to a complete stop. I'd recommend most kids learn that when they start to drive.
May as well just push the button. I’m a light braker and it will still engage auto stop when you come to a full stop.
I’ll push the button.
It’s become a habit for me to hit the off button on stop/start after I hit the start button. I don’t thinkthis device is worth the money or is really saving you any time. Plus it could? Screw something up.
Had this in my wife's 2016 jeep cheakee so we kind of got use of it my 2020 chev Silverado had it and now my 2024 chev Silverado has it now it a habit start motor hit button it doesn't bother me a bit dont even realize i do it
That’s a battery monitoring sensor bypass. The vehicle now thinks the battery isn’t charged enough to use the start stop feature. The downside is that now the vehicle will always be charging the (not really low) battery, even when it’s full. This can damage the (very expensive) glass mat battery over time or worse. 🔥 Trailer hitch connector plug in testers left plugged in do the same thing safely as the car thinks it’s running a trailer and disables the system safely.
incorrect. in many areas ..... that trailer hitch plug you recommend will disable the park sensors.
Plug a trailer tester into the flat connector at the hitch. The system sees a trailer and will not activate.
Then you lose park assist sensors.
Great idea!
Dam getting one! Thank you Buddy 🙏
No problem 👍
I just order one for my 2023 AT4. I’ll let you guys know how it goes!
How did it go?
I have never met anyone who likes this "feature". It's moderately tolerable in cars but just terrible in trucks.
Yup I agree with you 100percent I hate it to but it comes as a habit to just hit it Wright after you start it doesn't even bother me any more
Does this affect how the BMS or whatever charges the battery? Seems like it tricks the system into thinking there isn’t enough voltage for the Auto Start Stop, which may influence how the system treats the battery (as I’ve heard these modern systems regulate voltage depending on State of Charge and battery condition etc).
Just tap the damn "on/off" button on the dash to disable the stupid federally mandated auto ignition stop/start system every time you drive. The button even has a light to show whether the system is on or off. Nothing about your vehicle is easier to understand or to do than tapping that auto ignition start/stop on/off button. There is absolutely no need to permanently disable the auto stop/start system. Ever. The vehicle manufacturer could not have made this more simple.
@@roberthenry9319 I dont own one of these, or a truck with start stop, just curious being todays machinery is quite complex and integrated.
I've had this same kit on my wife's 2018 Enclave for years with no issues. No shut off button on those cars :/
@@roberthenry9319 With that mindset, why get electric windows, just manually roll them down each time yourself. Its a ridiculous concept. It does not save fuel by stopping at a 4 way stop, to shut off then immediately back on within a 1 min, but it does cause reduction in part life because ignitions, pumps, relays, etc can only be cycled so many times before they fail.
@roberthenry9319 Actually, it is a major inconvenience and safety concern. First, every time I get into my car to drive, I have to press 3 or 4 buttons and warnings just to get my vehicle to function. These federally mandated warnings and "features", have now become a burden. I will gladly pay to eliminate every one that I can. Secondarily, I've almost gotten into an accident on a few occasions because my vehicle shut off and it takes a few seconds to start back up if you need to quickly accelerate or get out of the way in traffic.
put it into trailering mode. The engine shut off is over ridden . it will stay in trailer mode until the truck is off for several hours
I like the idea, but I don't like running in tow mode.
Burn a lot more gas with tow mode
So push a button to keep from pushing a button?
@@454budman that's pretty darn funny
Where did you get your oil cap? That’s badass
Any updates on banks derringer for the 3.0
Seeing some fully deleted LM2 do you have to tune or just cut off the egr ? Thanks
Thanks ! It's a PPE oil cap. The Derringer will come out after the 6.6 one comes out. Priority to the new 6.6 but the tech from that derringer rolls to us.
You aint getting one for a while maybe ever. The 6.7 powerstroke for 20 and up has been coming soon for two years and they say they are still researching the 3.0l dmax. Dont hold your breath imo
@@DemonWorksyou have any inside info on the derringer now? Years and years and still nothing
New 24 LT Z71 here. Is this product going to do crazzy things to the electronics, possibly?
Is it going to void the warranty?
I absolutely hate that system!! Thank You
I got the other one that goes in the dash for my 2021. Just $99 ($135CAD). This one at $140 ($190CAD) is a bit too expensive. Taking apart the dash wasn't that bad. Given a choice, I still would have gone with the other one.
start-stop is actually harmless, these cars have heavyduty-starters and batteries, from factory. They are meant to stand more starting-cycles than older cars. Other systems are also beeft-up in these cars.
I know many focus on the starter and battery and I agree, that's a non-issue. The concerns I have with it is the going from heavy load to a stop and immediate shutdown, you now lost all oil flow to lubricate and cool as well as all coolant flow to maintain the cooling. This is especially bad when turbochargers can be over 1000 degrees quite often.
At least the 4 banners have electric water pumps that keep going after engine stop.
Harmless, maybe but a pure pain the backside. Had mine try and kill me twice already after trying to get a jump into traffic from a stop.
Typically you can disable this under vehicle settings in one of 2 menus you can access from the center console. It can also be switched from the dash cluster. Maybe this changed on the newer one, however I drive these professionally and most of the older and newer rental Tahoe, suburbans, Yukons, Escalades etc have the option to
Simply turn it off…
Negative. It's an emissions thing, not something one can just turn off permanently. There is a manual button one can press at each key cycle, though.
@@DemonWorks This is new or has changed with software I believe. 2015-2020 Tahoe,burban,Yukon,lade can all be deactivated in the menu, maybe even 2021 models are like this changing for 2022. Makes sense now that you say that because they have to meet overall emissions for the fleet, so I guess they baked it in, having it optional I don’t think EPA counts it. ( has to be the default driving mode or something like that) Having to add flex fuel to my Denali XL thankfully this one didn’t have stop start. Speaking of that you can always use HP tuners to turn this feature off too but will cost off
License and requires the ECU is sent out for a week to be unlocked. (Totally worth it)
I’m going to go out in a limb here and say that all that unit is doing is making the Battery Load Management system think there is too large of a load to allow the auto start stop system to shut down. Whether or not this has a negative effect on your battery or alternator I wouldn’t know but I would personally avoid messing with a system like your charging system especially if you venture out far with your truck like some of us do.
All it need to do is reduce the voltage during startup, the rest of the time it can give the system the full battery voltage.
The vehicle is looking for enough voltage during startup to confirm that the correct battery / a good healthy battery is installed.
All it does is trick the system into thinking that the battery is not rated for fast startups required by the auto stop-start system.
I actually don’t mind it on in my truck it’s really not that bad of a transition on the 2.7 turbo motor
It seems like a great alternative to the little harness you plug in behind the dash. The only concern is that they don’t mention anywhere on the site what their module is doing to override start/stop. So how is a consumer supposed to just put their trust in this individual blindly that it won’t negatively impact other systems on the truck?
You must never "trust the individual blindly that it won't negatively impact other systems on the truck". The driver of the vehicle (the consumer) is presumed to be intelligent enough to know to tap the "on/off" button on the dash (which has a yellow light to indicate whether it is on or off) to disable the auto engine stop/start feature when you get into the vehicle after you start the vehicle up or at any time while you are driving the vehicle. Yes, you the consumer does have to tap that button each time you drive the vehicle. You also have to press the AC button to "on" or "off" each time you want to turn the AC on or off. The consumer also has to flip the light switch at home to turn the lights on or off. This can be done without having to disable your home's electric power. Flipping the light switch is not very difficult to do. Neither is tapping the on/off button for the auto stop/start. You think?
i just picked a 2022 gmc sierra elevation 5.3 and its off by default from the factory i guess it was because the chip shortage thing
Yeah I had a 22 gmc 1500 as well without dfm system because of chip shortage. It was a great truck but got totaled march of this year. Not a big deal, just got a 24
6 cylinder duramax diesel? I’ve had (2), both with an overpowering coolant smell that’s most prominent from the passenger side fender/hood area but can also be smelled inside the truck. Have you experienced this?
Yes, if your coolant level is low, then I suggest you take a look at my video on leaks to give you some ideas on where to look. If no coolant loss, then it's likely the same thing most of us have which is just a smell from the coolant reservoir cap purging. ua-cam.com/video/HLhqwX_3ByI/v-deo.html
@@DemonWorks
Thanks, I appreciate it
You can also drive it with the transmission in manual and it won't shut the truck off, for free, your welcome... Plus transmission shifts much smoother
Any lights on the dash? looks to me like this makes the truck think the battery is too low to run the auto start.
agreed, no lights on the dash or within the system. I did a full system scan on a prior video for a scantool.
What about voltage on the dash? Does it show low?
the sensor this hooks too is just for the auto start i think. The ECM reads voltage @@ErikBansberg
@@JCunningham21 the ECM reads module voltage, not current flowing through the battery. The BCM reads from the battery current sensor, which is what this product is falsifying, and then sends information to the ECM on needs for charging and the auto stop/start. So my guess is you will not only lose fuel economy due to not auto stopping, you'll also lose fuel economy to running the alternator more to charge a battery that doesn't need charged. $140 to lose fuel economy and fix and problem that doesn't exist while also putting more strain on your alternator. That's what I call a fail of a product.
you are not losing any fuel economy buy not auto stopping. @@IVloses
i did the one behind the dash. ordered it befor I even picked up the truck
I have that one sitting on my desk. I didn't feel like going through all of the disassembly with the console.
ya no need if you can just do plug and play under the hood. im kind of worried about the one i have now if i ever have to take the truck in. Dealer might spend hours trying to figure out why my dash says auto start off every time the trucks started with out hitting the button. Then hand me a bill.
@@JCunningham21with the under dash version you can actually turn auto start/stop back on by pressing the button, it merely remembers your setting and holds it there.
correct @@Johnny_Bee
Why couldnt GM just made it so the stop/start is deactivated every time you start the truck then you can just engage it when your stuck in a drive threw or something... so dumb
Range technology makes a plug that disables the auto start and the cylinder shut off. 200 bucks from Amazon and you can keep your truck in v8 mode with no shut off all the time
Absolutely, I have that on my camaro
Do you have a link to the product (or the name)? I only see Range Technology modules that do one or the other, but not both.
@@pigzaj2 Range Technology RA003B AFM/DFM Disabler-Blue
@@MINIHAHA1 thanks for the info. I checked it out and it only disabled the cylinder shut off, not the auto stop/start. I'll keep looking for something that does both for a reasonable cost.
@pigzaj2 the one I have disabled it. My truck hasn't shit off since I plugged it in
$140? No thanks. I’ll just push the button.
So far my auto-stop mostly doesn't come on in winter. It's cold here so it stops stopping at lower than 20°F.
I've heard it won't come on if your front defrost is on.
It comes on with the defrost on, I think its partially temperature controlled, then whatever draw is on the battery. So if you have a lot of stuff on, like stereo, defroster or A/C and headlights then it won't come on as often.@@ShiftEnvy
Did you have any issues with your auto cooled seats? After installing this my auto cool seat feature does not work.
Just curious to know if you have had any issues since you installed this?
No issues with it, has been working as designed since installed.
Hi Quick question, does this device cause a draw on the battery when the vehicle is not in use?
Damn I wish you would of slowed that down . Does the light come on now on inside switch . After the install? Thats a great trick. Thanks
The light on the switch stays on.
Biggest complaints with my 2024 Denali 1500 6.2:
1) The sideview cameras do not work at night, so I can’t park close to a curb.
2) The Auto Stop/Start is dangerous and wears the starter/ring gear out, not
to mention the engine internals.
3) The tailgate button is next to the Remote Start button on the DOB, so my
tailgate hits my garage and inevitably, a motorcycle that parks too close.
4) It is only a matter of time before the tailgate step smashes into my trailer
hitch.
For complaint 4 u can lockout the inner tailgate
I really don’t get everyone’s hate on the start/stop. I have a 2020 traverse, and unless it’s the best system ever in all vehicles, I rarely if ever notice when it engages. I definitely don’t get the ‘jerking’ described in this video 🤷🏻♂️
maybe that comes down to the difference in a traverse vs a silverado ?
@@DemonWorksmaybe? But it’s not just truck vs traverse… I see the same complaint from owners of other brands (Dodge, ford, Hyundai, Mazda, Acura, etc…). I even test drove a couple Hyundai Palisades before settling on the Traverse and I couldn’t tell when it engaged or disengaged then either 🤷🏻♂️
I dont have an issue with turning off the button at start up. My concern is the cylinder deactivation when you're cruising at hwy speed. Can cause lifter failure, excessive oil consumption and eventually engine damage. Anyone run into this problem yet on your truck?
Get a Range Technology deactivator that plugs into the OBD plug. Available online at numerous places. Cost about $240. I have used one for years in my Silverado. Vehicle always stays in 8 cylinder mode. Great in the mountains or towing.
I got the Range Disabler for my 21 Sierra after the lifters went bad at 5K miles. It worked great, but I lost faith in the engine and sold it a month later.
I used a similar product,goes under the console and they are great.Stupid feature gm came up with.Whew.
So what color wire do you cut and send 12volts to? Little high to buy one
There isn't a wire to cut. The video shows the ground that gets installed with the nut and the connector that gets plugged in.
Does this interfere with using your auxiliary switches from turning accessories on?
A button on my dash to turn off Auto stop is just NOT that big of a deal to me. If a button wasn't easily accessible and was in the glove compartment or under the seat, then I would be interested in this product.
I could be wrong but I’m pretty sure if you hold the start button for 10 seconds it shuts off the auto start stop mode.
There's a button on the dash to shut it off.
Holding the start button down for 10sec stops the car/truck from shutting down after idling a while.
What about the warranty on the truck
$150 for this module or $99 for the one that goes behind the dash?!? Seems like the pricing is a bit high to justify for me...just my thoughts.
I hear ya, I have both but opted to install this one because it was so much more convenient.
For any truck o just diesel🤔
Gasoline as well
I love the auto stop, helps me get 17-23 mpg.
Where and what do. I buy for this auto start stop to eliminate the feature at the battery? Thanks
link is in the description.
Would this be useful in traffic so truck doesn’t idle as much?
This will keep it idling- so no
However it will increase turbo longevity because it has constant oil feed if it doesn't shut off as opposed to intermittent
Auto stop does not make my Sierra with the 6.2 jumpy at all, smooth and hardly notice at all. My old Ford made the whole vehicle shudder.
Any help with the operating system saying "sorry i'm offline and can't help you with that" almost every day at random time driving 2023 Silverado? I don't have a subscription to the service and don't want one.
I have no help for ya, unfortunately. I do not like the google system ...
My truck also says the same thing to me usually in the first mile of driving but randomly!
Hey man you have any connections at banks about when the Lzo tuner is coming out? Thanks
Once you see the 6.6 Derringer arrive, we will get ours
@@DemonWorks thanks dude. Will keep checking daily. Banks is the only name I can trust
@@travispinkerton9916 no problem! The 6.6 is obviously their priority and we are next up. The hood thing about that, what they learn and apply to that platform rolls to us.
Where can I buy this. Got a link?
Wait....they put auto stsrt stop on the DIESELS TOO?!?
How about take 2 second and push the button that is in every start/stop car.
fill it up and drive ! Thanks for watching
Chevy Equinox up to 2023 do not have the button on the dash, so....
My auto stop only worked the 1st 200 miles , after that , it has not activated.
On the other hand, I can not get my seat belt notification to stop beeping, even when the settings is off
What year is your truck. Did u reach out to the manufacturer?
My 82 Chevy doesn't have that problem
I wonder why 🙄
Probably affects your auto head lights too!
I tried my truck into an error… auto stop … stopped working but also the auto head lights stopped working … which is more annoying…
A better way to bynpass is to just turn on AC… set LO … min fan speed and blow on wind shield … auto stop … stopped working also…
no headlight changes here. Also, the a/c doesn't disable the auto stop, it will just occur less frequently dependent on in cab temps.
@@DemonWorks well … if you set it manually to LOW. And low fan speed… in theory .. it will never reach the temp… so will never auto stop :). It’s the only “free” solution in the summer … winter .. not so much ..
@@viperkiller0071 my ac is on 100% of the time, it still auto stops.
Looks like it disables/bypasses the high energy capacitor on the battery. Without that, system will not function. Think you can also replace the expensive AGM battery with a standard battery. Same results, no high energy capacitor for the AS system. Save a couple hundred dollars on the batteries too. 🤷♂️
HTF does it work if its only connected to power? 😲
Wonder how it works, it must trick the computer that the battery is at a lower voltage then it really is. So computer never calls for AUTO/START/STOP. Just a guess.
Manipulated battery temp reading.
My truck doesn't auto stop every time I come to a stop, so have just gotten used to it.
Will this work on 2020 Sierra RST as well?
Yes, it should. Double check with the website but it's the same setup.
It's just amazing all the haters.. If you own the truck just 3 years and use it once a day, that is1095 button pushes. Under a penny a push. Thanks for the idea.
Well said!
What we are paying for these vehicles we should be able to decide if we want this on or off! Not some dumbass sitting behind a desk wasting our tax dollars. Do their jets shut off when they are stopped on the runway?
Where do you get this product from
Does anybody have a link to this or what is it called exactly I can't understand what he says in the video. thanks
It’s in the description
@@DuramaxNews okay it's showing up. I didn't see it earlier. Anybody have any idea if this voids factory warranty or a GM scan tool that they use can detect it has been used before
I need one for a 2018 terrain
BUT NOW THE CLIMATE WILL WARM !!!! I'm too cheap, I just turn it off each time I get in my rig.
I hate that stupid auto stop, as well as the electronic dshifter. I hope they go back to steering column shifter and get rid of some of those stupid electronics gadgets that cause so many issues
So takes about 9 hours to install got it.
I guess you can say that if you sit there and stare at it. Or, you could just install it in the 20 seconds and continue on with life then once you wake up the next morning you're all set. Hope your day gets better, Don.
When it gets below $50 then I might buy one
Would this work on my ram 2024 1500 hemi ?
Unfortunately, I do not know. i would reach out to the manufacturer.
Doesn’t this void your warranty?
Which warranty would it void?
Do you run this in your zr2?
Not currently. The plan was to install the other style that plugs into the switch, but I haven't had time to install that one since it requires interior panels to be removed. Instead, I just reach over every time and push the switch, then sigh, then tell myself i really need to install the bypass.
Great videos. Keep em up!
What’s the reason for wanting to install a different product on the new truck since this one is so easy to instal?
@@michaelanderson350I try to test and show the installation of every product available.
does doing that effect the warrentee?
I would think so because you’re putting in aftermarket stuff.
I believe so because it’s aftermarket.
Wait how do you record and use carplay
When i try to record or use mic while using carplay there is no vice
Separate camera used, not my phone.
In 6 years they will tell you that you ruined your truck because you didn't use the feature!
Auto stop-start can save 5 to 10% on fuel depending on your driving habits.
I can see where it can be annoying in a non hybrid vehicle.
Yea: and I’ve had mine try to kill me at a quick start! I disabled it in all my vehicles.