Looking for some advanced tumbler engraving techniques like full pattern wraps and compensating for tapered surfaces? Check out this video here: ua-cam.com/video/_ajFcnnmS3c/v-deo.html Haven't purchased your XTOOL F1 yet? Links below for the best xTool Prices: XTOOL F1: ► www.xtool.com/products/xtool-f1?ref=D5HpJRsyqyUUnt& XTOOL F1 + Smoke Purifier Bundle: ► www.xtool.com/products/xtool-f1?ref=D5HpJRsyqyUUnt&variant=44034709520623 F1 RA2 Cable: ► www.xtool.com/products/xtool-ra2-pro-cable-for-xtool-f1?_pos=1&_sid=c853f97ee&_ss=r&ref=D5HpJRsyqyUUnt& If you are looking for products or items I've used with the F1 in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you): Electric Screwdriver: ► amzn.to/3P43fpz Digital Calipers: ► amzn.to/48IQh7w Tall Stainless Tumbler 4-Pack ► amzn.to/3CWBXLh 12oz Mug With Handle (8 Pack) ► amzn.to/3wqDadE 12oz Tumbler With Straw (12 Pack) ► amzn.to/3HZswgC 20oz Tumbler With Straw (25 Pack) ► amzn.to/48hQONK 144 Wood Pencil Pack ► amzn.to/3uzGTFq 100 Wood Pencil Pack ► amzn.to/42XN8jf 50 Wood Pencil Pack ► amzn.to/3UIzbTT 250pcs Aluminum Bottle Openers ► amzn.to/48iV7s2 100pcs Aluminum Bottle Openers ► amzn.to/48sdjja 48pcs Aluminum Bottle Openers ► amzn.to/4bEINoQ 20pcs Aluminum Bottle Openers ► amzn.to/49UZs67
Do you have something like this coming for the Ultra? Would love a kit that allowed tilt, but also secured the RA2 to the base of the Ultra so it doesn't shift between cups.
@@mikeyneeley Hi Mike, not sure why I didn't catch this comment earlier, but yes absolutely, I'll post up that link here for you if you haven't already seen my latest video on the ULTRA. ua-cam.com/video/-SMHiMlrrxo/v-deo.htmlsi=X8_UbjN4VOd5u561 Thanks!
received mine today and wow, amazing. i do a lot of glass wine tumblers and this has already made my life easier. no more propping the back of the rotary up and hoping it does not move. thanks for an amazing idea and product
You are so smart and crafty!! I just love all of your ideas of fixing any making things work better. I just literally purchase most of those inventions your made. I just subscribed too :)
Thank you so much! I guess it's always a little easier to see the solution clearly once the product is developed and in use - but I wouldn't be surprised if these companies have their own similar solutions soon
Great video, and perfect price point on the products- I have been thinking about designing something just like this, but when yours are already made and one click away… I happy ordered instead! Two suggestions- it would be great if there was a tool-less solution for adjusting the angle of the tilt. Perhaps a longer screw with an adjustment knob instead of the shorter hex bolt? It would also be wonderful to have the ability to fine tune the tilt with the twist of a dial. I’m imagining a lead screw that inserts into a jointed shaft under the chuck. That would let you spin the screw to adjust the angle of the the chuck plus it would be much more stable before tightening things down.
I didn't know it before, but I need that stinking tool . . . love how some of you industrious folks are so creative . . . about to get my mug on (as soon as my order arrives) . . .
@@EmbraceMaking, this add on is great and worth every penny . . . (once I got it set up) . . . a must have . . . have to make 16 coffee mugs for a friend . . . banged out 8 in no time with this tool . . . thanks so much for taking the time to create this . . .
I have just ordered your tilt mechanism and am looking forward to using it. It seems by far the best solution I’ve found to allow me to easily and accurately engrave the inside of the rings I make. I’m also going to be rotating the motor to put the connector on top, such a great tip. I think this set up is how the RA2 should leave the factory! Thank you for all the content and upgrades you have put out for the F1 - as a new laser user and F1 owner, you have been an invaluable resource and it is much appreciated!
My setting was Power 80, Speed 400, LOC 300 with an SVG design. The brand of the tumbler was Kodi. I will likely try again with different tumbler brand. I am sold on your tilt mechanism and look forward to trying it.
Sounds good, might be the brand then as you suggested. I just had the regular xtool smoke purifier hooked up in the sync setting with the switch at the back flipped to high. Other than that it was business as usual. With smoky materials I usually have another standalone room filter going but I usually don't run that for tumblers
Got my items yesterday and have to say more than happy :-) Would be a nice extra to include the allen wrench for the bottom angle adjusting screw bit luckily have an extra :-) Thanks again!
Might have to see if my rotatary for my ortur will work with the F1 when it finally gets here. Probably not but we shall see. I do like how it adjusts better
I have a question. In your video (5.46) you are previewing the image on the tumbler; how are you doing that? I also engraved a tumbler using BL and then, without touching the tumbler processed it again using IR and my IR was slightly off. Can you tell me what I did wrong? I am new to this and have ruined so many tumblers, until I learned to tape them with painters tape while I am practicing. I just ordered your Tilt mech, which will be super helpful. Thank you
That was just camera tricks :) I took the footage from my screenshot and overlaid it with the footage of the machine and reduced the opacity of the top layer. This is all after the fact and the intent was to show how in the software I rotated the image to match the direction of the tumbler when looking at it from the front of the machine. In reality there is no way to preview it like this, but you do have the framing tool to help you visualize where the image will be. In the video I explain how in XCS the green line at the top with the little rotating arrow symbol represents the very top of your tumbler. So if you align one of the edges of your graphic with that green line, that edge will be at the top of your tumbler when you engrave it. Edit to add a thank you for your order :)
If you're looking for just the riser feet - contact me through my website: embracemaking.com/pages/contact I can get you the riser feet separately, thanks!
Really appreciate the videos and the products. I’ve bought the backstop and the swivel assembly for the rotary- I am doing some 85mm diameter cups and the focus is maxing out when I line up the dots. Do you run into this issue? I feel like additional risers will help but I’m thinking I’m doing something wrong
Yes if you're finding a workpiece where the focus is a bit out of range- try shimming the whole machine up a few mm (while leaving the RA2 on the table.. don't lift this). Sometimes I use 3mm basswood under the F1 feet to shim it up 3mm at a time until it will focus again. Thanks!
@@EmbraceMaking Sounds good. Thanks again. You have made using this rotary a breeze. I don't suppose you have a settings suggestion for a white yeti tumbler? Had great success on certain cups but it mangled my yeti test piece. Can't find a lot of info on doing white Yetis on an F1 specifically, not sure if the textured white coating is somehow outside the range of what the F1 can engrave.
Great video and very helpful! I started using my ra2 this weekend and your products will be helpful. I am concerned about the burning smell of the tumblers despite the air purifier and since the F1 is open, my craft room smelled for hours after engraving 1 tumbler. Any suggestions or thoughts about that issue? Thanks!
Interestingly I've found that the F1 produces the least offensive smell when engraving tumblers. What are your settings like? I've noticed that on some of my other higher power machines I might have the power on too high and it smells worse. On the F1 the settings that I used were just enough to remove the coating but didn't produce that really noticeable burning paint smell.
Hey thanks for checking it out, they are actually part of the F1 tilt kit since they work together to get the job done on the tumblers and mugs, thanks!
You mentioned that the IR laser needs some time to heat up. Since we are dealing with heat, the room temperature probably affects the settings. I would think that is would benefit for xTool to give a reference room temperature and experiment on what the settings changes should be on +1 or -1 degrees so you can adjust accordingly.
Amazing video and I will be ordering your accessories. I did have one question, for short highly tapered shot glasses which method would you recommend? Use the rotator with your tilt mechanism? These are only about 2.5" tall, 2" opening diameter x 1.25" bottom diameter. None of the included chucks will hold the glasses due to the taper. Thanks!
They come with the F1 tilt mechanism. If you need just the feet separately, head to the contact page on my site and shoot me a message and we can work something out. Thanks!
Very much an "it depends" kind of situation... it depends on the size and intricacy of the graphic, how far it wraps around, etc. I can see if I can go back in my files and see if I can find the estimated job time for some of these examples
I just ordered my F1 and was thinking of trying to engrave a spiral graphic on a cylinder. Have you tried that? I'm already thinking og mounting the rotary chuck on the slider to engrave magic wands 😂. I assume I'll need a cable extension and it limits the max diameter quite a bit...
The continuous spiral would be an interesting challenge. I recently made a video with 360 degree engraving but to do a continuous spiral you'd have to get more creative... ua-cam.com/video/_ajFcnnmS3c/v-deo.html
I'll see what I can do for future versions, I had looked into it the past and had a hard time finding thumbscrews that long but maybe I can get some custom made!
I just noticed that the rotary guide I received requires the long bolts anchoring the chuck to the device actually need to be inserted on opposite side (backside) as the implanted nut into which the screw will insert is actually on the chuck side not as shown in video.
I believe you're talking about the long bolts from the original RA2 that hold it to the tilt? If so, it is okay if they are facing either direction, it won't impact anything. Thanks!
Your link to hazardous materials is not working unless it’s not available in Australia, thanks for your awesome videos, I’ve saved the F1 videos for when I get mine soon.
Hi Jim, sorry not sure how I missed this comment for so long. Yes the bubble level holder and backstop kit are their own listing here: embracemaking.com/products/xtool-ra2-bubble-level-holder-and-backstop-kit?_pos=1&_psq=bubble&_ss=e&_v=1.0 Thanks!
Where are you located? Use the contact page on my website and send me your address with the items you want. I'm working with new couriers and I can get way better rates international now :) thanks !
Making the image a vector takes away any greyscale artifacts so the edges are sharp + vectors can be scaled without loss. So I just generally like working with them when I can.
I don't have the dropdown for cylindrical laser option in my XCS. I uninstalled and reinstalled the software, it says it's the latest version, but there is no dropdown, what am I doing wrong?
I believe they have tried to speed it up with optimized tool paths in the newest creative space 2.0 but yes I did expect it to be a faster machine than it is.
Looking for some advanced tumbler engraving techniques like full pattern wraps and compensating for tapered surfaces? Check out this video here: ua-cam.com/video/_ajFcnnmS3c/v-deo.html
Haven't purchased your XTOOL F1 yet? Links below for the best xTool Prices:
XTOOL F1:
► www.xtool.com/products/xtool-f1?ref=D5HpJRsyqyUUnt&
XTOOL F1 + Smoke Purifier Bundle:
► www.xtool.com/products/xtool-f1?ref=D5HpJRsyqyUUnt&variant=44034709520623
F1 RA2 Cable:
► www.xtool.com/products/xtool-ra2-pro-cable-for-xtool-f1?_pos=1&_sid=c853f97ee&_ss=r&ref=D5HpJRsyqyUUnt&
If you are looking for products or items I've used with the F1 in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
Electric Screwdriver:
► amzn.to/3P43fpz
Digital Calipers:
► amzn.to/48IQh7w
Tall Stainless Tumbler 4-Pack
► amzn.to/3CWBXLh
12oz Mug With Handle (8 Pack)
► amzn.to/3wqDadE
12oz Tumbler With Straw (12 Pack)
► amzn.to/3HZswgC
20oz Tumbler With Straw (25 Pack)
► amzn.to/48hQONK
144 Wood Pencil Pack
► amzn.to/3uzGTFq
100 Wood Pencil Pack
► amzn.to/42XN8jf
50 Wood Pencil Pack
► amzn.to/3UIzbTT
250pcs Aluminum Bottle Openers
► amzn.to/48iV7s2
100pcs Aluminum Bottle Openers
► amzn.to/48sdjja
48pcs Aluminum Bottle Openers
► amzn.to/4bEINoQ
20pcs Aluminum Bottle Openers
► amzn.to/49UZs67
Do you have something like this coming for the Ultra? Would love a kit that allowed tilt, but also secured the RA2 to the base of the Ultra so it doesn't shift between cups.
@@mikeyneeley Hi Mike, not sure why I didn't catch this comment earlier, but yes absolutely, I'll post up that link here for you if you haven't already seen my latest video on the ULTRA.
ua-cam.com/video/-SMHiMlrrxo/v-deo.htmlsi=X8_UbjN4VOd5u561
Thanks!
received mine today and wow, amazing. i do a lot of glass wine tumblers and this has already made my life easier. no more propping the back of the rotary up and hoping it does not move. thanks for an amazing idea and product
Thank you so much for the feedback and the order. Your support means a lot to me!
You are so smart and crafty!! I just love all of your ideas of fixing any making things work better. I just literally purchase most of those inventions your made. I just subscribed too :)
Thank you so much for the kind words and support! Your subscription means a lot! :)
Your videos are almost as amazing as the upgrades you designed for this laser. Thank you
Glad you like them! Really appreciate the praise!
Thanks
Man your solution to the rotary is amazing! I wonder who works on those companies that can't think of these type of solutions
Thank you so much! I guess it's always a little easier to see the solution clearly once the product is developed and in use - but I wouldn't be surprised if these companies have their own similar solutions soon
May I ask why you just did not place the whole rotary 180 degrees out where the drive is on the opposite front side of the laser mechanism?
Thanks for this detailed breakdown. Got this for playing around and this breakdown was awesome. Just ordered your tilt kit and level from your site. 👍
So helpful for rotating the motor! Placed an order and looking forward to receiving it to play/work :-)
Thank you so much!
Great video!!Very well explained,love how you care about details...And yes!!! I subbed!!!
Thanks for the sub! and thank you so much for the nice words :)
Fantastic Job. Will definitely be buying your Attachments
Awesome, thank you!
Great video, and perfect price point on the products- I have been thinking about designing something just like this, but when yours are already made and one click away… I happy ordered instead!
Two suggestions- it would be great if there was a tool-less solution for adjusting the angle of the tilt. Perhaps a longer screw with an adjustment knob instead of the shorter hex bolt?
It would also be wonderful to have the ability to fine tune the tilt with the twist of a dial. I’m imagining a lead screw that inserts into a jointed shaft under the chuck. That would let you spin the screw to adjust the angle of the the chuck plus it would be much more stable before tightening things down.
I didn't know it before, but I need that stinking tool . . . love how some of you industrious folks are so creative . . . about to get my mug on (as soon as my order arrives) . . .
Thanks for the comment, you're going to find it very useful for your projects :)
@@EmbraceMaking, this add on is great and worth every penny . . . (once I got it set up) . . . a must have . . . have to make 16 coffee mugs for a friend . . . banged out 8 in no time with this tool . . . thanks so much for taking the time to create this . . .
I have just ordered your tilt mechanism and am looking forward to using it. It seems by far the best solution I’ve found to allow me to easily and accurately engrave the inside of the rings I make. I’m also going to be rotating the motor to put the connector on top, such a great tip. I think this set up is how the RA2 should leave the factory! Thank you for all the content and upgrades you have put out for the F1 - as a new laser user and F1 owner, you have been an invaluable resource and it is much appreciated!
Thanks for the comment and I really appreciate the order - it goes a long way to supporting my channel and my work :)
Excellent video. Very informative.
Awesome, thanks for watching!
My setting was Power 80, Speed 400, LOC 300 with an SVG design. The brand of the tumbler was Kodi. I will likely try again with different tumbler brand. I am sold on your tilt mechanism and look forward to trying it.
Sounds good, might be the brand then as you suggested. I just had the regular xtool smoke purifier hooked up in the sync setting with the switch at the back flipped to high. Other than that it was business as usual. With smoky materials I usually have another standalone room filter going but I usually don't run that for tumblers
Nicely done and great explanations
Thank you so much, glad you enjoyed it!
Your videos are superb! I just purchase several of your products. Great job!
Thank you so much for your support!
Fantastic presentation . Thank you
Glad you enjoyed it!
Awesome, Love Your Videos
Thank you so much :)
just ordered the tilt mech, it will make my life so much easier when etching wine glasses
Thanks for your order - really appreciate it!
Excellent job thank you 😊
No problem 😊
Thanks! your videos are great, it's hard to find anything out there on this machine for settings and good details.
Glad you think so! I do my best to keep track of all of the settings and present them in each example. It's a really capable compact machine
Absolutely brilliant.
Really appreciate it :)
EXCELLENT !!! THANK YOU !!!
You're very welcome!
Amazing work here. Thank you. Subbed
Thanks for the sub! Appreciate having you on board!
will you have any videos on how to do a full wrap with the f1?
Working on it right now ;)
Check it out here: ua-cam.com/video/_ajFcnnmS3c/v-deo.html Hope you like it!
Hi dear , do u have video on how to centre the design with chuck with xtool f1
Got my items yesterday and have to say more than happy :-) Would be a nice extra to include the allen wrench for the bottom angle adjusting screw bit luckily have an extra :-) Thanks again!
Thank you! I will see if I can find a good source for the wrenches, I like that idea!
Great video ❤ where could I get the feeds?
Send me a message on my website if you only want the feet only, we can work something out
@@EmbraceMaking thank you, I found your Website. The kit for the xtool F1 will be perfekt for me 🤗
Great video. Thanks for sharing. Can I get a link to the mini screwdrivers you used please. I’m in the UK
Thanks! This is the one I use but it's on the US Amazon: amzn.to/3P43fpz maybe you can find a local equivalent?
Thank you but I was actually talking about the non electric ones.
Might have to see if my rotatary for my ortur will work with the F1 when it finally gets here. Probably not but we shall see. I do like how it adjusts better
I have a question. In your video (5.46) you are previewing the image on the tumbler; how are you doing that? I also engraved a tumbler using BL and then, without touching the tumbler processed it again using IR and my IR was slightly off. Can you tell me what I did wrong? I am new to this and have ruined so many tumblers, until I learned to tape them with painters tape while I am practicing. I just ordered your Tilt mech, which will be super helpful. Thank you
That was just camera tricks :) I took the footage from my screenshot and overlaid it with the footage of the machine and reduced the opacity of the top layer. This is all after the fact and the intent was to show how in the software I rotated the image to match the direction of the tumbler when looking at it from the front of the machine. In reality there is no way to preview it like this, but you do have the framing tool to help you visualize where the image will be. In the video I explain how in XCS the green line at the top with the little rotating arrow symbol represents the very top of your tumbler. So if you align one of the edges of your graphic with that green line, that edge will be at the top of your tumbler when you engrave it. Edit to add a thank you for your order :)
Could you please post a link to where one can find this laser safety glasses ?
Of course! Here you go: embracemaking.com/products/laser-safety-glasses-blue-diode-ir?_pos=1&_sid=2238dcfba&_ss=r
Where can I order rise base ?
If you're looking for just the riser feet - contact me through my website: embracemaking.com/pages/contact
I can get you the riser feet separately, thanks!
Great video thank you so so much!
Hey sorry if you covered this and i missed it, but do those riser attachment feet come with the RA2 pro? Or do you have to buy them from somewhere?
The riser feet come with my tilt kit for the RA2 found here: embracemaking.com/products/xtool-f1-ra2-pro-tilt-mechanism-kit. Thanks!
Really appreciate the videos and the products. I’ve bought the backstop and the swivel assembly for the rotary- I am doing some 85mm diameter cups and the focus is maxing out when I line up the dots. Do you run into this issue? I feel like additional risers will help but I’m thinking I’m doing something wrong
Yes if you're finding a workpiece where the focus is a bit out of range- try shimming the whole machine up a few mm (while leaving the RA2 on the table.. don't lift this). Sometimes I use 3mm basswood under the F1 feet to shim it up 3mm at a time until it will focus again. Thanks!
@@EmbraceMaking Sounds good. Thanks again. You have made using this rotary a breeze. I don't suppose you have a settings suggestion for a white yeti tumbler? Had great success on certain cups but it mangled my yeti test piece. Can't find a lot of info on doing white Yetis on an F1 specifically, not sure if the textured white coating is somehow outside the range of what the F1 can engrave.
Great video and very helpful! I started using my ra2 this weekend and your products will be helpful. I am concerned about the burning smell of the tumblers despite the air purifier and since the F1 is open, my craft room smelled for hours after engraving 1 tumbler. Any suggestions or thoughts about that issue? Thanks!
Interestingly I've found that the F1 produces the least offensive smell when engraving tumblers. What are your settings like? I've noticed that on some of my other higher power machines I might have the power on too high and it smells worse. On the F1 the settings that I used were just enough to remove the coating but didn't produce that really noticeable burning paint smell.
I didn't see the feet for the F1 in your store. Are they still available?
Hey thanks for checking it out, they are actually part of the F1 tilt kit since they work together to get the job done on the tumblers and mugs, thanks!
You mentioned that the IR laser needs some time to heat up. Since we are dealing with heat, the room temperature probably affects the settings. I would think that is would benefit for xTool to give a reference room temperature and experiment on what the settings changes should be on +1 or -1 degrees so you can adjust accordingly.
Amazing video and I will be ordering your accessories. I did have one question, for short highly tapered shot glasses which method would you recommend? Use the rotator with your tilt mechanism? These are only about 2.5" tall, 2" opening diameter x 1.25" bottom diameter. None of the included chucks will hold the glasses due to the taper. Thanks!
Hi Patrick, I'm surprised the chuck jaws won't grip the outside of the large rim of the glass?
I can’t find the risers that you put on the bottom. Where do I find them on your website?
They come with the F1 tilt mechanism. If you need just the feet separately, head to the contact page on my site and shoot me a message and we can work something out. Thanks!
Silly question but can you normally tell the IR is doing something as it is going? I can’t see anything while it is working unlike the BL
Do you have a video for setup with the L Bracket tilt assembly that comes with the RA 2 Pro kit?
How long does it take to engrave the tumbler?
Very much an "it depends" kind of situation... it depends on the size and intricacy of the graphic, how far it wraps around, etc. I can see if I can go back in my files and see if I can find the estimated job time for some of these examples
So will this tilt kit also work with the F1 Ultra? Even though we can’t remove the base plate in the ultra?
I have an ULTRA specific kit in the works, stay tuned!
I just ordered my F1 and was thinking of trying to engrave a spiral graphic on a cylinder. Have you tried that? I'm already thinking og mounting the rotary chuck on the slider to engrave magic wands 😂. I assume I'll need a cable extension and it limits the max diameter quite a bit...
The continuous spiral would be an interesting challenge. I recently made a video with 360 degree engraving but to do a continuous spiral you'd have to get more creative... ua-cam.com/video/_ajFcnnmS3c/v-deo.html
@@EmbraceMaking it'll require some testing and fiddling around for sure 😁
Can you set the F1 with RA2 up so it will engrave all the way around instead of just a badge/icon on one side?
For sure you'd be looking for this video here: ua-cam.com/video/_ajFcnnmS3c/v-deo.html
Thank you so much! I truly appreciate you getting back to me so quickly!
good idea, i will have to print me one
Thanks, enjoy it!
Do you just sell the riser pieces themselves? Those are ideal for what I need to do
Yes for sure, if you contact me through my website just ask and I'd be happy to set you up !
What is the minimum diameter that can be held by the RA2?
You can configure the jaws (inverted) so they clamp down and touch one another (ie. 0mm) What is it that you're trying to hold?
Idk if anyone has said it, but replacing the bolt that locks down the tilt attachment with a tool less option would be beneficial.
I'll see what I can do for future versions, I had looked into it the past and had a hard time finding thumbscrews that long but maybe I can get some custom made!
Will this work with the F1 Ultra?
Nope - but F1 ULTRA specific application incoming!
Where can I get the adapter for the f1 I only saw it for d1
Can you buy just the mounting feet?
If you can send me an email through my website we can make it happen, thanks!
I just noticed that the rotary guide I received requires the long bolts anchoring the chuck to the device actually need to be inserted on opposite side (backside) as the implanted nut into which the screw will insert is actually on the chuck side not as shown in video.
I believe you're talking about the long bolts from the original RA2 that hold it to the tilt? If so, it is okay if they are facing either direction, it won't impact anything. Thanks!
Does the tilt and backer work with the S1?
Should work but you'll need the riser base for the S1 and my tilt mechanism adds another ~30mm to the RA2 height so you'll have to account for that.
Awesome thanks will have to try it out.
hi great video, don't you just sell the print files I'm from the uk it would save on the shipping and time tia
I don’t get option for such high power. I use svg’s?
I have a catch in the wheels somewhere. Any suggestions? Its causing severe ghosting. I have ruined a couple of tumblers so far.
Is this on your rollers or somewhere in the chuck? Can you feel it when you turn them by hand?
Your link to hazardous materials is not working unless it’s not available in Australia, thanks for your awesome videos, I’ve saved the F1 videos for when I get mine soon.
is the bubble holder available just by itself? Not the owner of a F1
Hi Jim, sorry not sure how I missed this comment for so long. Yes the bubble level holder and backstop kit are their own listing here: embracemaking.com/products/xtool-ra2-bubble-level-holder-and-backstop-kit?_pos=1&_psq=bubble&_ss=e&_v=1.0
Thanks!
Do you ever consider some vendors outside of canada? +50% for shipping of some 3D printed parts is wild :(
Where are you located? Use the contact page on my website and send me your address with the items you want. I'm working with new couriers and I can get way better rates international now :) thanks !
What does making the image a vector do? Also how do you know the vector is done correctly
Making the image a vector takes away any greyscale artifacts so the edges are sharp + vectors can be scaled without loss. So I just generally like working with them when I can.
Super interested in partnering up would love to discuss more
I don't have the dropdown for cylindrical laser option in my XCS. I uninstalled and reinstalled the software, it says it's the latest version, but there is no dropdown, what am I doing wrong?
On page 38 of the rotary manual, it says remove ONLY baseplate for cups with handle.
You upgrades are always awesome...great job! The only negative is that the F1 is incredibly slow, you could never use it for production work.
I believe they have tried to speed it up with optimized tool paths in the newest creative space 2.0 but yes I did expect it to be a faster machine than it is.
Why didn't you just rotate the RA2 180deg so the motor is on the other side?
you can also buy USB C Extension cables.
I recently purchased an f1 and had a horrible experience with their customer service. While I love fiber lasers I would not recommend xtool.
Are you selling these mugs for $420 dollars because seems to be the best way to make money.
Will this work with the M1?