If you appreciate this thorough video and are looking for items I've used in this video check the links below for the best prices and exclusive xTool discounts! For all of my personal upgrades and accessories head over to www.embracemaking.com XTOOL F1 ULTRA: ► www.xtool.com/products/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver?ref=D5HpJRsyqyUUnt& XTOOL F1 ULTRA deluxe bundle: ► www.xtool.com/products/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver?ref=D5HpJRsyqyUUnt&variant=45219501605103 RA2 Module: ► www.xtool.com/products/xtool-ra2-pro?_pos=1&_sid=1e57e74d2&_ss=r&ref=D5HpJRsyqyUUnt&variant=44042680533231 As an Amazon associate I may earn a small commission (at no extra cost to you): 4" Inline Duct Fan with Controller ► amzn.to/4a91Nd4 Air Quality Monitor ► amzn.to/3xgoaA2 Electric Screwdriver: ► amzn.to/3P43fpz Digital Calipers: ► amzn.to/48IQh7w 40oz Tumblers (4 pack): ► amzn.to/3Mr0EV0 Tall Stainless Tumbler 4-Pack ► amzn.to/3CWBXLh 12oz Mug With Handle (8 Pack) ► amzn.to/3wqDadE 12oz Tumbler With Straw (12 Pack) ► amzn.to/3HZswgC 20oz Tumbler With Straw (25 Pack) ► amzn.to/48hQONK 50 Wood Pencil Pack ► amzn.to/3UIzbTT 100pcs Aluminum Bottle Openers ► amzn.to/48sdjja
I love your design. If you could revise the adjustment to make it easier with a rear adjustable knob with spring to hold the tension. It will be the best design out there. You won't have to constantly use a wrench every time it needs adjusted, its so much easier.. I have one on my ra2 and it's amazing to use. Mine lacks the rear support and height that you designed. Very nicely done sir! Great video by the way. I'm now subscribed.
Thank you for sharing this informative video on the laser machine. Your expertise and enthusiasm shine through, making it both educational and enjoyable to watch. Keep up the excellent content!
Thank you so much for the great video. I was having some issues with my F1ultra and the rotary tool but your video got me on the right track. I also ordered a few of your items as I think they will make things so much easier. Looking forward to more videos! Great Job!
So in your tutorial, during the setup you show the handle parallel to the base plate (12:00 mark). At 12:30 you have the handle rotated, but do not comment on it.... How do you rotate the handle to the correct position so that the logo is aligned in relation to handle?
Just adding some info... you mentioned some 40oz tumblers have removable handles. I can verify that Stanley tumbler handles are removable, as well as the tumblers I bought from TEMU that look just like my Stanley.
Thanks Tony, the ones I have here are probably removable but it isn't immediately obvious how to do it. Do yours just pull off? Or is there any exposed hardware?
I know you are trying to sell your designs specifically, but you really should mention that xTool also has an accessory kit for the RA2 Pro that works very well, plus the laser alignment tool that comes with it is worth the accessory price by itself.
There are two versions of the RA2, the Pro is the "base" model that has no tilt adjustment, and then xTool sells the "deluxe" kit that has their version of a contraption that tilts the RA2. However, with their version it is not specific to the F1 Ultra or any machine for that matter... so it will still fall off the F1 ultra base and you won't get any alignment benefits. Also their tilt contraption won't tilt as high as the one I designed. I try to make mine application specific so you get the most out of them vs. a one size fits all that has too many limitations. Thanks!
@@EmbraceMaking Your wont go back far enough not to have to reverse and hold the bottom of the tumbler meaning you cant engrave a wrap all the way around.
oohh..thanks. Have you tried any colour engraving on these types of tumblers? I know you can colour engrave on stainless steel so would be interested to see if it works on these too :)
Will you be added any videos for the Creative Space 2.1, I just downloaded it and would love to see better info on it. I just ordered the tilt and the back stop. Thank you so much for sharing your knowledge.
Love it. Unfortunately I purchased another tilt system and can't afford this one too. Is it possible to purchase the RA2 mount separately? I purchased your XTool F1 ULTRA Controller Stand and Mount and it is great.
@@EmbraceMaking I sent a message late last night. Also purchased your XTool F1 to F1 ULTRA Fixture Adapter and XTool F1 V-Block / Pencil / Bottle Opener Jig
Are you going to do a video on a 40 oz full wrap? You accepted the challenge 3 months ago 🤣. I’d love to see if this is possible. It’s so slow on my D1 pro and I just upgraded to the F1 Ultra.
Yes I am! I'm just putting out the S1 RA2 video next which is in the works and there will be the full wrap 40oz. Same principles will apply but should be able to get an F1 ultra video about it edited soon too 🙂
I bought the tilt mechanism upgrade a while ago but then it didn't come with the parts to fix it to the F1 Ultra base. Do you sell that part separately or would I have to buy the whole kit again?
Hi Alex, which model did you purchase? The body of the tilt mechanism is interchangeable between my kits so if you need the F1 ultra specific parts just head over to my website, click the contact button and let me know by email. We can work something out, thanks!
If you appreciate this thorough video and are looking for items I've used in this video check the links below for the best prices and exclusive xTool discounts!
For all of my personal upgrades and accessories head over to www.embracemaking.com
XTOOL F1 ULTRA:
► www.xtool.com/products/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver?ref=D5HpJRsyqyUUnt&
XTOOL F1 ULTRA deluxe bundle:
► www.xtool.com/products/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver?ref=D5HpJRsyqyUUnt&variant=45219501605103
RA2 Module:
► www.xtool.com/products/xtool-ra2-pro?_pos=1&_sid=1e57e74d2&_ss=r&ref=D5HpJRsyqyUUnt&variant=44042680533231
As an Amazon associate I may earn a small commission (at no extra cost to you):
4" Inline Duct Fan with Controller
► amzn.to/4a91Nd4
Air Quality Monitor
► amzn.to/3xgoaA2
Electric Screwdriver:
► amzn.to/3P43fpz
Digital Calipers:
► amzn.to/48IQh7w
40oz Tumblers (4 pack):
► amzn.to/3Mr0EV0
Tall Stainless Tumbler 4-Pack
► amzn.to/3CWBXLh
12oz Mug With Handle (8 Pack)
► amzn.to/3wqDadE
12oz Tumbler With Straw (12 Pack)
► amzn.to/3HZswgC
20oz Tumbler With Straw (25 Pack)
► amzn.to/48hQONK
50 Wood Pencil Pack
► amzn.to/3UIzbTT
100pcs Aluminum Bottle Openers
► amzn.to/48sdjja
I love your design. If you could revise the adjustment to make it easier with a rear adjustable knob with spring to hold the tension. It will be the best design out there. You won't have to constantly use a wrench every time it needs adjusted, its so much easier.. I have one on my ra2 and it's amazing to use. Mine lacks the rear support and height that you designed. Very nicely done sir! Great video by the way. I'm now subscribed.
Thank you for sharing this informative video on the laser machine. Your expertise and enthusiasm shine through, making it both educational and enjoyable to watch. Keep up the excellent content!
Thanks for the thoughtful comment Abby! Really appreciate it!
Thank you so much for the great video. I was having some issues with my F1ultra and the rotary tool but your video got me on the right track. I also ordered a few of your items as I think they will make things so much easier. Looking forward to more videos! Great Job!
Thank you so much for all of your support, it really means a lot to me and helping push this channel forward :)
As usual, great video!
Thank you !
Thanks I will doing my first craft show this Nov 24. Just got my F1 2 days ago.
That's awesome! Good luck with the craft show :)
@@EmbraceMaking Thanks, It is exciting. But nervous
Awesome video! Easy to follow instructions. Can't wait to try out the tilt kit =)
So in your tutorial, during the setup you show the handle parallel to the base plate (12:00 mark). At 12:30 you have the handle rotated, but do not comment on it.... How do you rotate the handle to the correct position so that the logo is aligned in relation to handle?
You did great job
Thank you so much :)
Just adding some info... you mentioned some 40oz tumblers have removable handles. I can verify that Stanley tumbler handles are removable, as well as the tumblers I bought from TEMU that look just like my Stanley.
Thanks Tony, the ones I have here are probably removable but it isn't immediately obvious how to do it. Do yours just pull off? Or is there any exposed hardware?
@@EmbraceMaking The stanleys have hex head screws and the cheap temu ones have philips screws
I know you are trying to sell your designs specifically, but you really should mention that xTool also has an accessory kit for the RA2 Pro that works very well, plus the laser alignment tool that comes with it is worth the accessory price by itself.
You mention your adapter kit for the RA2. I have the RA2 Pro so do I still need your adapter kit for my Ultra?
There are two versions of the RA2, the Pro is the "base" model that has no tilt adjustment, and then xTool sells the "deluxe" kit that has their version of a contraption that tilts the RA2. However, with their version it is not specific to the F1 Ultra or any machine for that matter... so it will still fall off the F1 ultra base and you won't get any alignment benefits. Also their tilt contraption won't tilt as high as the one I designed. I try to make mine application specific so you get the most out of them vs. a one size fits all that has too many limitations. Thanks!
@@EmbraceMaking Your wont go back far enough not to have to reverse and hold the bottom of the tumbler meaning you cant engrave a wrap all the way around.
oohh..thanks. Have you tried any colour engraving on these types of tumblers? I know you can colour engrave on stainless steel so would be interested to see if it works on these too :)
Do you sell the files for these accessories, or just the kits? Either way, I need this kit!
Will you be added any videos for the Creative Space 2.1, I just downloaded it and would love to see better info on it. I just ordered the tilt and the back stop. Thank you so much for sharing your knowledge.
Absolutely :) Working on it and should have something soon, stay tuned and I really appreciate your order!
Love it. Unfortunately I purchased another tilt system and can't afford this one too. Is it possible to purchase the RA2 mount separately? I purchased your XTool F1 ULTRA Controller Stand and Mount and it is great.
Thanks! Reach out to me here: embracemaking.com/pages/contact and we can work something out I'm sure.
@@EmbraceMaking I sent a message late last night. Also purchased your XTool F1 to F1 ULTRA Fixture Adapter and XTool F1 V-Block / Pencil / Bottle Opener Jig
Are you going to do a video on a 40 oz full wrap? You accepted the challenge 3 months ago 🤣. I’d love to see if this is possible. It’s so slow on my D1 pro and I just upgraded to the F1 Ultra.
Yes I am! I'm just putting out the S1 RA2 video next which is in the works and there will be the full wrap 40oz. Same principles will apply but should be able to get an F1 ultra video about it edited soon too 🙂
Hi, where did you get the 3D Model of the F1 Ultra ?
Im confused why your xcs looks way different to mine. Any idea why?
I bought the tilt mechanism upgrade a while ago but then it didn't come with the parts to fix it to the F1 Ultra base. Do you sell that part separately or would I have to buy the whole kit again?
Hi Alex, which model did you purchase? The body of the tilt mechanism is interchangeable between my kits so if you need the F1 ultra specific parts just head over to my website, click the contact button and let me know by email. We can work something out, thanks!
@@EmbraceMaking Thank you very much! I will do that.
Does anyone know of a video that explains what the laser attachment and how to set it up. I know it helps find center but no one has video on it.
I dotn have a SCORE on easy set pannel, just engrave is there.
I think it might depend on the material or even the process. Are you trying to score a tumbler or what is it you're trying to achieve?
Not a master at tumblers until you can do a 40oz full seamless wrap.
Challenge accepted! Will keep this in mind and try to cover this in a future video!
Truth! ❤❤❤❤❤❤