Hey 👋 It takes about 13 minutes total, because we like doing 2 passes. But some people prefer a single pass and then do some additional scrubbing afterwards with higher power and the blue laser.
Do you have the correct USB cable connected to the correct USB on the F1 and the computer? You can’t connect to Wifi until you connect with the USB first. If you can’t use the USB then you need to contact XTool for help.
Excellent video! Thanks for that… by the way, have you ever come across when an F1 makes a weird beep while using, then the blue light goes nuts and focuses as a thick blue line???
Thank you!!! I am a newbie and have a question: I engraved a steel pizza cutter; all went well but I washed it in the dishwasher and some letters faded...(settings: IR 100% , speed 80, 2 passes, lines 300)
Hey I am sorry to hear that. Are you saying that it no longer marks any material? On any setting? If you have a Facebook I highly recommend messaging Lia Zhang, she is part of support and typically responds really quickly. facebook.com/profile.php?id=61552603568761
I have problems with the IR after the Firmware update. WHAT I used to do in 5 to 6 minutes takes me 20 minutes now when I make a simple little 4 letter name. Anything I can do? Some help? I bought the F1 Xtool to do fairs but with that time it is not good for me. Thank you.
Happy to help! It’s a great laser and still our most used one. If you would like to support us when you make that decision we do have affiliate links in our description. But no worries we are always happy to help with any questions you may have
Hernandez Amy Garcia Christopher Brown Kimberly
Using mine for the first time tonight live!
Martinez Christopher Martinez Steven Gonzalez Kenneth
Garcia Anthony Thompson Edward Thompson Jose
Clark Jennifer Gonzalez Richard Brown Mary
Young Christopher Wilson Lisa Garcia Angela
Allen Lisa Gonzalez Shirley White Deborah
Robinson Margaret Anderson Brian Garcia Dorothy
Williams Paul Martinez Barbara White Thomas
Williams Daniel Taylor Jennifer Anderson Barbara
Garcia Linda Gonzalez Shirley Young Helen
Martinez Barbara Miller Helen Wilson Cynthia
Perez Michelle Lee Sharon Davis Margaret
Brown John Hernandez Thomas Young Jason
Rodriguez David Martin Amy Taylor Maria
I'm thinking about one of these for portable work. About how long does it take to do a tumbler such as the one shown around 2:50?
Hey 👋 It takes about 13 minutes total, because we like doing 2 passes. But some people prefer a single pass and then do some additional scrubbing afterwards with higher power and the blue laser.
Walker Larry Clark John Clark George
I got a lot done thanks to you! Thank You!
Awesome! We are very happy to hear that!
Lee Anna Perez Melissa Taylor Angela
Why won't my XTOOL F1 connect with USB or wi-fi???😢
Do you have the correct USB cable connected to the correct USB on the F1 and the computer? You can’t connect to Wifi until you connect with the USB first. If you can’t use the USB then you need to contact XTool for help.
Allen Michelle Perez Charles Perez Matthew
Excellent video! Thanks for that… by the way, have you ever come across when an F1 makes a weird beep while using, then the blue light goes nuts and focuses as a thick blue line???
Thank you!!! I am a newbie and have a question: I engraved a steel pizza cutter; all went well but I washed it in the dishwasher and some letters faded...(settings: IR 100% , speed 80, 2 passes, lines 300)
You all are AMAZING! Your pdf is PRICELESS! Thanks for all you do! Will you be getting the F1 ULTRA (I so hope so)
What are the settings for Bambo lids?
We have a short with Bamboo lids, the settings are in the comments
You guys are the best😊!!!… Keep it coming… Really appreciate your channel and tell others about it all the time. Thanks for the PDF also!!!
Many thanks for you video and PDF!!!
Lots of great information for the new user. Thanks!
My IR laser is no longer visible. What does that mean? I couldn’t get an answer from Xtool.
Hey I am sorry to hear that. Are you saying that it no longer marks any material? On any setting?
If you have a Facebook I highly recommend messaging Lia Zhang, she is part of support and typically responds really quickly.
facebook.com/profile.php?id=61552603568761
Just bought mine this morning, i'm so excited to have it and dive into this new world for me, glad I found this channel!♥
Welcome aboard! It’s a great laser
I think I need to upgrade the software 1st. My xcs does not look like yours. What version is that?
It’s version 2.0 but it is still in beta. So you may experience some issues.
Please keep sharing ❤❤
My red dot and blue dot are not overlapping. The blue dot has a little blurr to it
Mine too
Gonzalez Mary Moore Sandra Hernandez Carol
You're the best
I have problems with the IR after the Firmware update. WHAT I used to do in 5 to 6 minutes takes me 20 minutes now when I make a simple little 4 letter name. Anything I can do? Some help? I bought the F1 Xtool to do fairs but with that time it is not good for me. Thank you.
Hmm it appears that some others have been experiencing the same issues. We believe xTool is currently investigating
Hope they aren’t trying to push the Ultra on people making the original F1 slower. 😮
Yeah that would be awful hopefully it is just a bug
I really appreciate your videos!
Thank you so much for the support!
Amazing thank you 😊
You are very welcome 😄
LOVE YOUR VIDEOS
Thank you so much! Really appreciate the support!
Planning on buying one this is a great confidnce boost
Happy to help! It’s a great laser and still our most used one. If you would like to support us when you make that decision we do have affiliate links in our description. But no worries we are always happy to help with any questions you may have
The beeping is gone !!!! Yay thank you sooo much!
Haha you bet! Happy to help!