Took my Greenworks electric chainsaw model 20332 apart and found that the spring that holds the tube from the oil reservoir up to the pump had slid down so the tube was crimping in 2 spots. Slid the spring back up, oil flows, problem solved. Took a little courage to remove screws and the clip that holds the sprocket in place - it's like a key chain ring. You'll need something very pointy to separate it and turn it out to remove. Also, don't forget to hook the 2nd tube from the pump to the feeder whole back up when putting the housing back together.
This is a terrible video. Fill up the oil tank, take the bar and chain off the thing and squeeze the throttle trigger to make the motor run, if you dont see oil seeping out of the black rubber weep hole the oil pump is busted or plugged.
It's videos like this, why we need the dislike button. I just wasted a minute of my life....as opposed to clicking on the video, seeing all the dislikes, then leaving.
Took my Greenworks electric chainsaw model 20332 apart and found that the spring that holds the tube from the oil reservoir up to the pump had slid down so the tube was crimping in 2 spots. Slid the spring back up, oil flows, problem solved. Took a little courage to remove screws and the clip that holds the sprocket in place - it's like a key chain ring. You'll need something very pointy to separate it and turn it out to remove. Also, don't forget to hook the 2nd tube from the pump to the feeder whole back up when putting the housing back together.
This is a terrible video. Fill up the oil tank, take the bar and chain off the thing and squeeze the throttle trigger to make the motor run, if you dont see oil seeping out of the black rubber weep hole the oil pump is busted or plugged.
Some saws have an oil adjustment screw to change the rate of oil discharge.
It's videos like this, why we need the dislike button. I just wasted a minute of my life....as opposed to clicking on the video, seeing all the dislikes, then leaving.
I noticed that when the chain stretches too far the hole in the bar no longer matches the oiler outlet. Looks like I have to get a new chain.
This is a disturbing video, it seems generated by a chatbot. It has zero content.
Where can I get a Greenworks 80V chainsaw replacement oil reservoir tank.? Can't find one on their web site. Mine is cracked and won't hold oil.
Brand new and not oiling. What new?
Then the bar next, Tour right that is good to sell replacement parts 😞
The oil spills everywhere instead of staying in the hole. 😫