Chainsaw not oiling? Check this FIRST! - Homestead Tips
Вставка
- Опубліковано 9 гру 2019
- Stop burning through your chains! In this video we talk about how to make sure this doesn't happen by checking your chainsaw oiler.
A little about us:
In September 2015, our hearts were hijacked with the dream of living on a large farm, with community, growing food, caring for animals and loving on children in need of care and healing. It was a God moment, where our dreams collided with His dreams… a dream so big we could never do it in our own strength and wisdom. Since then, we have been on a journey to see that dream become a reality. This channel documents that journey.
Instagram - / goshenfarmandgardens
Facebook - / goshenfarmandgardens
Website - goshenfarmandgardens.org
Another reason why your chainsaw might not be oiling: There are two very small holes in the bar. They're on opposite sides of the bar. When the chain is mounted properly, one of the holes will be located opposite the duct where oil flows from the oil pump. The oil flows out of the duct, through the hole in the bar, and onto the channel / slit of the bar where the chain runs. If the hole in the bar is plugged with a mixture of sawdust and oil -- or if the channel is full of sawdust -- then the oil won't coat the chain. So clean out the hole in the bar and clean the channel of the bar.
P
You didn't consider that the bar is clogged also; in which case, you still won't get any flow to the chain.
After making sure the bar, groove and hole is clean, It was still not delivering oil. Simple fix on mine was that the little hose in the oil tank was flipped up. In other words the hose inside the oil tank was sucking air from the top, not oil from the bottom. Just make sure the hose is pointing down and at the bottom of the tank. Stihl O19T.
Glad I came here, mine was all gunked up cleaned it out real good, and still no oil. Read your comment and mine was sucking air also, now it's working good . Thanks to you both.
I had that problem with the fuel pick up on a Stihl blower.
Thanks for posting, an easy fix but something I didn't know until being shown. Full working order again ✊
Great video, really informative. Thank you for taking the time to make it. Greetings from Greece
4:03 it's not the chain you're going to run through if the oiler doesn't work, you're going to create a bur on the edge of your bar that will keep wearing down the edge, considering the chain is hardened metal and the bar is just mild steel, it's the bar that is going to wear down
Great video !! Thanks . I run 3 diff size stihls and always push them too hard with clogged oiler . I will def make sure to service mine more 👨🏻👍🏼
Be sure to clean the groove in the bar where the chain runs. Clean it out really good. Must be free of debris if it's going to oil properly 🙂
And remember, that God loves you ! 🙂
Thank you! I have to share this!
Going to turn our local Stihl dealer in to manufacturer. When I got the saw back from a hard starting issue it was still hard starting & the chain wasn't getting oil!
This video helped me! Thank you.
Good advice on oil delivery. I just had mine serviced at a certified Stihl dealer, not real happy with the product and service I received, tipped the guy 25 bucks, nice guy but old behaviors hard to get rid of, like blowing compressed air when finished with the mechanics, giving the client a clean machine after spending 200 bucks + tip. The guy was my age, 63 , you would think us old folks would be better at these typical issues. The exception is definitely not the rule!
Thank for the video dude, was helpful with a different brand of chainsaw, but helped a lot !
Great film thanks
Much appreciated! Friend's dad gave him a Stihl MS311 that isn't geting oil to the chain. I'm going to try to solve his problem. You video is a GREAT place to start. Again - thanks.
What was the problem mine is like bran new and and it spits almost no oil
Much appreciate the help
Good tips!...thanks
Thank you.
Ha! Love it. Thanks man
So, you were just out of chain oil, right? That's all I saw.
😂🤣
That's all i got from the video lol
Thanks! This is why I love UA-cam 😁 uncruded and oiled up like a beaut
lol
more detail for not oiling chainsaw and is the petrol is correct way to wash.
Nice vid 😊👍
Without bar oil running properly, you will also burn up your chainsaws bar, causing your chain to get sloppy in the channel.
Took my Greenworks electric chainsaw model 20332 apart and found that the spring that holds the shape of the tube from the oil reservoir up to the pump had slid down so the tube was crimping in 2 spots. Slid the spring back up, oil flows, problem solved. I'm always hesitant about taking things apart, so it took a little courage to remove screws and the clip that holds the sprocket in place - it's like a key chain ring. You'll need something very pointy to separate it and turn it out to remove. Also, don't forget to hook the 2nd tube from the pump to the feeder whole back up when putting the housing back together.
Czy jak idzie pół zbiornika oleju na zbiornik paliwa to źle czy może tak być??
I have the same saw it's coming out somewhere else and no idea why -.- I probably have to place the whole case
What if you check and clean everything but still no oil coming?
You didn't show how to adjust the oiler . Mine has oil and it's free off gunk. But still no oil.
My small hole in bar quickly close with wood and dust and oil is not flow along chain it just came down.... What is its solution
Great you take the Time 2 show Folk's this Area with Pulp build up Requiring Regular Maintenance , Tooth Brush the SucKer ". .
Or compressed air the sucker!
Does it matter if the bar is upside down
Thanks for vital info location and adjustment. Also flawed video footage.
0:61 “these two nuts!” 🤣😂
Kaun sa oil dalta hai
Can you increase the oil flow rate via some type of adjustment
Yes
Thanks for posting that video
What model?
You also should unlock the brake before removing the cover if the band is in the cover. If you don't do that you will have a heck of a time getting the cover back on again with the brake set.
Get some compressed air and clean that saw, also change your drive sprocket.
so, what if i have the opposite problem and it dumps way too much oil out
Oil tank or hose is probably either leaking (not seated properly anymore) or the hose has cracks in it. Best way to tell if either of those are the problem is fill up with oil and wait for the engine to get a little bit warm then cut it off and then see if a lot of the oil in the tank get about empty with the saw just sitting. If the oil comes out that’s the issue
If you're running an older Stihl chainsaw, on the bottom of the saw there is a round plug with a fitting for a screwdriver, this is your oil adjustment plug. Use a screwdriver to adjust how much oil it's using. There is a video on UA-cam somewhere of a guy who show's you how to do it.
Dude you need to keep the cam on the spot where the oil comes out!
My ms 390 saw won’t distribute oil after all above cleaning etc , anyone have any ideas what else it could be?
Your oil pump could be bad.
Check clutch is seated on notch for worm gear if applicable. Replace worm gear and oil line 4:22
good info. Noticed in your video you are overdue to change your drive sprocket. Need replacing
How can you tell? Mine’s started rattling a bit.
Can I use honey mixed with water for chainsaw bar lubrification ?
🤔
Why would you wan to? Bar oil is very inexpensive, especially when you consider what it will cost you to replace the bar and chain because you wanted to save a dime or nickel.
💩😂🤣😂
Also mix in a little silica sand to promote the lubrification process.
@@shawnwise2458 I heard gorilla glue does the trick
So you just have to keep topping up the oil! Ok, thanks for that useful tip.
Good lubricant
Sir Bering breke dram 038
I've done that and it didn't help.... what do I do next?
U can also clean ur bar.. theirs 2 holes were the oil goes Into. Make sure their clean and not plugged.
I was expecting to learn about FIXING the Oiler, not a class in cleanliness.
First comment I guess?
Thanks for watching!
You didn't mention to check your bar oiling holes on eather side of bar, always make sure they are not blocked As this is often the course of chain and bar not receiving the lube.
Seriously don't understand the purpose of this video. Sorry, you shouldn't own a chainsaw if you didn't do this before looking for videos.
Oilers don’t clog