Gate to high off the track, wheels should be fitted internally to stop wheel's causing injury to children. You need safety edges on all sheer pionts and safety edges plus a force test for trapping danger.
Probably shouldn't have those rollers on a wooden post.. or the catchers and stops on wood posts/fence either. The conduit for the cable should not have been cut flush with the ground to prevent water seeping in and should also have been sealed with silicon at least.
1:26 if that cable goes into that motor as it is going into that base, it is non compliant with electrical regulations. Cant have exposed tps below 1.8m.
"HOW TO install an automated gate" - basically in this video I don't see that how-to, all you can see is 2 guys placing a prefabricated gate on a rail and that's it for the automation get an electrician :)
You make it looks easy. Comfort and security in one short video.
I AM LEARNING THIS thanks for your videos, its amazing,
WHat a great amount of information, in such a short video> YAY!
Thanks for the guidance
What size concrete srews did you use?
I like your video
How level does the concrete needs to be?
Thanks for sharing. Can i ask it is a Iron gate or plastic gate？
Iron gate!
Gate to high off the track, wheels should be fitted internally to stop wheel's causing injury to children. You need safety edges on all sheer pionts and safety edges plus a force test for trapping danger.
Probably shouldn't have those rollers on a wooden post.. or the catchers and stops on wood posts/fence either. The conduit for the cable should not have been cut flush with the ground to prevent water seeping in and should also have been sealed with silicon at least.
Hi, do you do installation in Rotorua? If so, what are the charges for installing?
1:26 if that cable goes into that motor as it is going into that base, it is non compliant with electrical regulations. Cant have exposed tps below 1.8m.
Is that aluminum or metal gate ? Thanks
Edit it’s obvious aluminum. Thanks for uploading the video to give basic general info on to build one
What use music video background
"HOW TO install an automated gate" - basically in this video I don't see that how-to, all you can see is 2 guys placing a prefabricated gate on a rail and that's it for the automation get an electrician :)
Maybe it’s that easy?
speaking of quality exposed electrical wires (230 volts) garbage motor and gate hardware.
and your suggestion? Or are you just hating?
Yeah, a bit amateur. At the very least it should be chased under the motor base and concreted over.
No just facts. The gate operator is crap. I am a Profesional gate installer fir over 25 years experience. That gate system won't last.
Did anybody learn anything from this guy. No, not a thing, garbage commercial.
I learn something
I definitely learnt something.
I learned something bro. Thanks to this video I can see that it's not too difficult ay. (Aussie here trying to speak Kiwi :)
I learned how easy these few steps are
This is how you make video nice and simple no babbling