FCR carburetor conversion kit install video for: 03-07 ltz400/ 04-07 dvx 400 /03-06 kfx 400
Вставка
- Опубліковано 7 вер 2024
- Install video on how to install your fcr carburetor onto your machine. we carry both kits as just the intake kit or carburetor and intake kit, please see link down below. we have testing this kit on our own dvx 400. patent pending design allows you to use your stock air box.
zoomzoomparts....
zoomzoomparts....
what size is the carb?
Why would you guys not designed the other boot around the the 400EX your boot is way too restrictive I think you guys should do a revision using the 400EX boot stock them
I am not that far from you guys!
I am getting my old z400 going again. It has carb, cams, drz base gasket, full exhaust. Might need a new carb since I can't find parts for the Edelbrock qwicksilver carb.
I never tuned an FCR, how are they to tune? How would the power be compared to the Edelbrock?
Hi there, you are welcome to stop by and we can discuss it. we do have this in our shop, so we can show you more about it.
Thinking about getting the kit. Wish I knew what the gains would be.
Bigger intake, better throttle response and more air
Can this work for a polaris scrambler 500 H.O.?
no it does not.
I got a 2007 and I need to put a new Carburetor I'n it
kfx, ltz or dvx?
Can this carburetor work 9n a 500 H.O. polaris scrambler?
Can you give me the dimensions in inches?
And thanks for replying!
For clarification you turned the stock carb into a FCR Flow setup? Comparable to what MM?
we made a fcr conversion kit for the ltz/dvx and kfx 400. its a direct bolt on kit no modifications needed and it allows use of your stock air box.
How can I get the sleeve from the air box to the carburetor?
Do you provide tuning assistance for us local Michiganders?
Hi there, we do not. depending where you are we recommend labarons in imlay city, But your local powersports place should be able to help with tuning.
the 06 ltz400 has a tps sensor on the carb, what are you supposed to do with it with installation?
Hi there, this kit will only work with the models that dont have the tps on the carburetor. thank you
You still have this ltz 400 kit? Just done a 440 bb and port polish heads and stage 2 cams on mine wanting to upgrade this lousy carb i have on her now
yes, we have them in stock ready to ship. zoomzoomparts.com/pages/search-results-page?q=400+fcr
Hello my friend
So the carburetor is the same as the ones that come off of the yfz 450? The fcr 39mm . Will I expect the same gains?
this is our version of the fcr. we have yet to dyno test this setup, but after the install the change was dramatically better, even on a stock machine.
@@zoomzoompartsllc ok so what size is the carb? And will it be fine paired with a big bore kit? Thanks for replying.
@@zoomzoompartsllc oh and what about tuning the carb? What jets would work?
@@christianescalera1193 we use a 39mm, and yes it will work on a big bore kit. great upgrade for the big bore!
@@christianescalera1193 tuning is easy. same tuning and you would an fcr, and any fcr jet kit will fit in it.
Where can I buy the install kit??
zoomzoomparts.com/pages/search-results-page?q=dvx+fcr
Man this is annoying... nothing like not being shown.