BMW e90 Rear shock mounting kit replacement DIY

Поділитися
Вставка
  • Опубліковано 10 лют 2023
  • I had to replace my rear shock mounting kit for the driver side. This video shows briefly what has to be done. Less than 1 hour of DIY which requires basic mechanic skills
  • Розваги

КОМЕНТАРІ • 21

  • @johnchadbone
    @johnchadbone Рік тому +2

    Good job, thanks bud, mine went through today, i hit a pothole doing 70, heard a massive bang, pulled over to have a look about, all seemed ok until i drove away, then the knocking started and backend was all over the place. Ordered new parts will fit when get here

  • @sharat1987
    @sharat1987 10 місяців тому

    Finally found the video I was looking for. Going to fix my BME 328i broken mount issue tomorrow.

  • @Youtype1
    @Youtype1 Рік тому +1

    Thanks. I was so lost when I was fixing my shock absorber

  • @paulmcevoy5529
    @paulmcevoy5529 Рік тому +1

    Great video....mine did it yesterday...a COMPLETE list of what is needed would have been super helpful.

  • @harmangidda6161
    @harmangidda6161 Місяць тому

    At 1:04 right under the top mount, there is like a flanged part that's rusted. Is that the part that broke from the metal cap? If so, did you remove it because I didn't see it again in the video. Also, is it necessary to change the shocks too because I had mine done less than 4 years ago...

  • @nikmohdrostamniksoh4457
    @nikmohdrostamniksoh4457 Місяць тому

    Hi sir...after replacement upper and lower mounting do we need to do tire allignment?

  • @joshcatalano5127
    @joshcatalano5127 8 місяців тому

    Did mine yesterday but the top bit wouldn’t come through e ouch for je to screw the bolt on didn’t seem like there was enough thread to catch it tried pushing it up any ideas?

    • @sforist
      @sforist 8 місяців тому

      Put a bunch of weight in the trunk, that should squat it down a bit.

    • @waqassiddiqui8796
      @waqassiddiqui8796  8 місяців тому

      You need to use a jack under the rotor and push it up!

  • @dolo_kaayy
    @dolo_kaayy 8 місяців тому

    and that shock dust cover is that supposed to be able to move up and down?

    • @waqassiddiqui8796
      @waqassiddiqui8796  8 місяців тому

      No, it sits on top. You could tape it, it protects against dust and mud going in

  • @SluggerJai
    @SluggerJai 6 місяців тому

    Hey question what tool did you use to get the bolt off ?

    • @waqassiddiqui8796
      @waqassiddiqui8796  6 місяців тому

      The top one? I think a 10 mm maybe smaller socket + a wrench (i used an adjustable one) to lock it. The bottom one was just a Bolt and I had to lock it with a wrench

  • @dolo_kaayy
    @dolo_kaayy 8 місяців тому

    what’s the parts called that i have to buy? i search but nothing comes up for my car🤦🏽‍♀️ i have a 2010 323i

  • @waqassiddiqui8796
    @waqassiddiqui8796  8 місяців тому +1

    Strut mount kit. www.amazon.ca/KYB-SM5752-Strut-Mount-Kit/dp/B01GQ8D60A/ref=asc_df_B01GQ8D60A/?tag=googlemobshop-20&linkCode=df0&hvadid=292997173836&hvpos=&hvnetw=g&hvrand=13779184375353663863&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9000812&hvtargid=pla-587941011581&psc=1&mcid=38b7477c78413d66bd4b2804ab847601