I love watching the ebb and flow of nature on your farm and the ways your focus adapts to the changes as you do the chores and the maintenance. It may sound silly, but I find it like a beautiful piece of music played by an orchestra. Yeah-pretty sappy 😉.
Brilliant watch, packed with different jobs and no owl BS. I’ll be tackling our Yamaha’s brakes myself after watching this. Top marks to you sir always learning something new👏🏻👏🏻👏🏻
Ur an all round man adrian.is there anything u can't fix or make.brillant video as always .straight to the point and no bullolgy.keep up the great work.hope all the family are well.
Interesting video again Adrian,calfs and heifers look very well, surprising the difference 3 months shows on different size calfs,good to see you have plenty of grass.
Crows are very territorial. We used to run a crow trap near lambs and bales. The bait was another crow from the far side of the county. Without fail the local crows would come down to fight with it and get trapped.
A pick mix Adrian but of great intrest .. tis like going on a farm walk keep your eyes open 👀 and your bound to see something so simple but effective and wonder why didn't I think of that myself good stuff sir 👍
Great video Adrian can I give you a little tip? Before you push the piston back in on the quad or any vehicle lift the rubber back and put a bit of spray oil onto the piston will help keep it from seizing up in future. 👍🏻
@@IFarmWeFarm yeah they are very bad for rusting up alright WD 40 works wonders great video again keep up the good work won’t be long now till Girls are in for the winter ❄️ 👍🏻
Very informative as usual Adrian, I agree with the bracket job on the quad, for the money you would think they would supply a bracket, I see some one has already said about a mat under the Tank they rub through so easily, you must of had some rain we have not had as much as that, as always very enjoyable thank you for sharing and good luck to you and the family
Cheers lad, ya we have a site of rain earlier in the week. Last Saturday night was unbelievable here and the whole Sunday after. I heard some parts down the country had very little. Hard to believe it with what we got here
Just have to be real careful it wouldn’t restrict the air flow John, 90 degree turn would be very risky on a 500cc engine. It’s a good idea if it worked though 👍
Great video Adrian,thank you for sharing. Regarding the sprayer bar,if you were to drop it below the exhaust would that be any better or would it be too low? I'd certainly sooner have it low rather than too high and having drift. Heifers look in great condition. 👌
Crows aren't displaying mating behavior at this time of the year, but if they have young still fresh out of the nest, they will punish anyone or anything that gets too near them. They will also thrash any other bird that finds their stashes of "tasties," kind of like how you'd feel if someone found your secret bag of Werthers.
Just a suggestion adrian put an old cow mat or conveyor belt under the tank . I've seen a tank with a hole in it from vibrations and moving around slightly on the quad rear frame .they all move a little bit no matter how tight you have them clamped down
Adrian…. I think every one of your videos should also have a nice few moments of footage featuring your nice Massey-Ferguson tractors. Just a few moments of at least one of them to satisfy the MF lovers out here. 😎 that is how I found your channel in UA-cam a long while ago. Stay Safe, and thank you for your efforts! 👍🏻
Commenting on the last video Do you know u can get a share grab that can take the plastic off as well that might be a better investment u wouldn’t have to take the share grab off. I have 1 it very handy.
Great video Adrian. A filter vise grips is great to push back them pistons 👍. The stuff u used for ringworm can that be used on dogs? If so what was the name of it again thanks 👍.
I’ll have to look that up, never heard of the stuff till it was suggested to me. Ringworm turned black the next day so will be interesting to see what happens
@@IFarmWeFarm you’ll have to check there site out TEC TV I think it’s father and son pair there hoof trimmers that they paint it on it’s like thin ish bluey jell that they use for dermatitis. Good luck with it.
Adrian you should upload a 30 second clip of you changing the brakes to UA-cam shorts, I go there to get quick tutorial a lot and I’m sure many others do
Depends on the quad and tyre lad, keep them very low. Most people like myself would ya e had them to hard at times as that left the steering easier to turn but that’s wrong. I’ve about 8 psi in mine as the tyres are thick walled. Makes a big difference with grip and comfort.
@@IFarmWeFarm yeah I seen a safety demonstration at tullamore show and they had them at 5psi to get as much wheel surface on the ground as possible for grip but obviously the steering can be very heavy
@@IFarmWeFarm thank you for taking your busy time to reply…. Get the girls a credit to you to edit your videos etc you do need more lol…. A good idea of mine stop though traffic…. British and Irish need keep us fed forget rest of world … shame I’m in England love see your farm
Perhaps it‘s good you didn‘t make those latches on the wall. Now you exactly know where to put them. When you first build it, you would have probably put them on the wrong spots.
Ur a man of all trades adrian
That stationary crush is perfect
👍👍You are so handy at so many things! The young cattle look good. 😁
“Your health is your wealth” wise words Adrian. ❤️
Nice one Adrian, some man for one man, great video, keep at her Lad!
As always great to see your Sunday Video!
Great stuff
You're a cracking lad Adrian. Always a great explanation of things. 👍
I love watching the ebb and flow of nature on your farm and the ways your focus adapts to the changes as you do the chores and the maintenance. It may sound silly, but I find it like a beautiful piece of music played by an orchestra. Yeah-pretty sappy 😉.
Showed this comment to my wife, she didn’t agree 🤣🤣. Thanks as always Janet 👍
Never disappoint with ur videos Adrian, it's a real mixed bag, general run of the week farm work, no such thing as sugar coating anything. 👍
Brilliant watch, packed with different jobs and no owl BS. I’ll be tackling our Yamaha’s brakes myself after watching this. Top marks to you sir always learning something new👏🏻👏🏻👏🏻
Hello from Saskatchewan, Canada great videos thanks for sharing
Cheers Brent as always , thanks for tuning in
Cracking video as always. You always give your video’s attention to detail for those who are of a non farming background
Cheers lad, yes we have gained a lot of people from the non farming background, love to see it
@@IFarmWeFarm I’m from a farming background myself
Quality content as usual Adrian, and lot more in the near future with the quad and the wee grey builds, can't wait for those two!
Thanks for sharing your vids with us!
Big difference in the size of those calves. Thank you for sharing.🐄🐄
Yes they’ve grow well, last years were much bigger and more even in size due to there age, but I’m happy considering all that. Cheers Randy
Ur an all round man adrian.is there anything u can't fix or make.brillant video as always .straight to the point and no bullolgy.keep up the great work.hope all the family are well.
Great video Adrian calves are looking great too. take care til next time.
Enjoyed it Adrian.
Great video Adrian Great stock
Another great video Adrian 👍👍👍👍👍
We use to put Vaseline on , it seemed to help.
I love the great care you give your animals
Great video Adrian
Interesting video again Adrian,calfs and heifers look very well, surprising the difference 3 months shows on different size calfs,good to see you have plenty of grass.
Crows are very territorial. We used to run a crow trap near lambs and bales. The bait was another crow from the far side of the county. Without fail the local crows would come down to fight with it and get trapped.
They are for sure Terry, there not a nice thing around young lambs. There numbers seem to have increased 10 fold in the last few years
Never been this early for video
Grate video as ever lovley bunch of heifers the January versus April some difference. Electric fence is your friend when your on your own 👍
It might have been a bit of a mix BUT it was a fantastic video ......and what a lovely clean Farm you keep a credit to you and your family 👍👍👍👍👍👍👍👍😉
Great job ,Adrian nice quad lovely farm keep up the good work, on ur farm 🚜 , kieran from Laghey donegal town
Thanks Kieran, do be in your part of the country quite often 👍
Hi Adrian,busy,busy,busy!
Brilliant video as ever Adrian👌🏻
Really looking forward to the videos on how the other quad turns out…. It’s been a while since the last one on it😄
Great video 🤠
Grass looks in good shape Adrian , here in the UK were all burnt up .
A pick mix Adrian but of great intrest .. tis like going on a farm walk keep your eyes open 👀 and your bound to see something so simple but effective and wonder why didn't I think of that myself good stuff sir 👍
Great video Adrian 👌
Great video Adrian can I give you a little tip? Before you push the piston back in on the quad or any vehicle lift the rubber back and put a bit of spray oil onto the piston will help keep it from seizing up in future. 👍🏻
Good idea, I do have to do that on my L200 every now and again. Pistons are forever seizing on them 👍
@@IFarmWeFarm yeah they are very bad for rusting up alright WD 40 works wonders great video again keep up the good work won’t be long now till Girls are in for the winter ❄️ 👍🏻
Great all-round content. Adrian 👍🏻
Very informative as usual Adrian, I agree with the bracket job on the quad, for the money you would think they would supply a bracket, I see some one has already said about a mat under the Tank they rub through so easily, you must of had some rain we have not had as much as that, as always very enjoyable thank you for sharing and good luck to you and the family
Cheers lad, ya we have a site of rain earlier in the week. Last Saturday night was unbelievable here and the whole Sunday after. I heard some parts down the country had very little. Hard to believe it with what we got here
Great video Adrian.Variety is the spice of life!
Great video as always Adrian, when you're fitting the sprayer could you fit a pipe with 90 degree bend to excaust pipe might help 🤔
Just have to be real careful it wouldn’t restrict the air flow John, 90 degree turn would be very risky on a 500cc engine. It’s a good idea if it worked though 👍
Great video Adrian, you’re calves are doing well. Looking forward to the upcoming content. 👍🏻
Nice wee vid there sir.. 👌 grass is looking well compared to some over here... stay safe 🏴
Along th route the funeral went today there was no grass it looked burnt. Lovely tillage fields Lovely countryside
Great video, regarding your holding pen gate behind the crush, a spring loaded latch, and plenty holes in the wall would be a great job!
And another advantage would be that there would be nothing for the animals to bang against and possibly cause injury.
Very good idea, I had though of that original, like a non return push and hatch type system would be handy
The track down the farm looks better than the cavan roads
Great video Adrian,thank you for sharing.
Regarding the sprayer bar,if you were to drop it below the exhaust would that be any better or would it be too low?
I'd certainly sooner have it low rather than too high and having drift.
Heifers look in great condition. 👌
Might be a bit restrictive then lad is what I’d worry about, ya definitely keeping it low is the way to go. “ no poetry intended “ 🤣
Worth looking into either through manufacturers or Amazon but you may be able to convert drum brakes to disc on other quad .
You can but it’s hardly worth the hassle or expensive Dale, you couldn’t really tell the difference on a light quad like that.
Crows aren't displaying mating behavior at this time of the year, but if they have young still fresh out of the nest, they will punish anyone or anything that gets too near them. They will also thrash any other bird that finds their stashes of "tasties," kind of like how you'd feel if someone found your secret bag of Werthers.
Adrian - I was just about to ask you about the Fergie - and you stolen my thunder. Great video.
Just a suggestion adrian put an old cow mat or conveyor belt under the tank . I've seen a tank with a hole in it from vibrations and moving around slightly on the quad rear frame .they all move a little bit no matter how tight you have them clamped down
Yes that would be a very good idea lad, I will do just that. Keep an eye out 😉👍
Mine was the same and I patched it now I put a bit of carpet under it
Cow mat works perfect simple fix
Adrian…. I think every one of your videos should also have a nice few moments of footage featuring your nice Massey-Ferguson tractors. Just a few moments of at least one of them to satisfy the MF lovers out here. 😎 that is how I found your channel in UA-cam a long while ago. Stay Safe, and thank you for your efforts! 👍🏻
Thanks Douglas 👍
Great video as always. Is it mats for the parlor
It would be nice to mount the sprayer on the te20👍
Friel atv seel them booms there a fine job
,an you should spray wd40 in under the rubber on caliper helps to take dustout an keep all freed up
Did you ever do brakes on I for William trailer. I have to do mine and general tidying up lights
Yes I gave done a few, very simple shoes to do. Just take a few photos before you remove the two springs.
Commenting on the last video
Do you know u can get a share grab that can take the plastic off as well that might be a better investment u wouldn’t have to take the share grab off. I have 1 it very handy.
New rock definitely make one
I think there’s a few companies that do them Josh, just wouldn’t know for sure of hand. Tanco I think is one of them
Great video Adrian. A filter vise grips is great to push back them pistons 👍. The stuff u used for ringworm can that be used on dogs? If so what was the name of it again thanks 👍.
I have no idea Bryan, iodine but heard is good on dogs or a fungal spray
That jell looks similar to what TEC TV uses for Dermatitis on cows hooves
I’ll have to look that up, never heard of the stuff till it was suggested to me. Ringworm turned black the next day so will be interesting to see what happens
@@IFarmWeFarm you’ll have to check there site out TEC TV I think it’s father and son pair there hoof trimmers that they paint it on it’s like thin ish bluey jell that they use for dermatitis. Good luck with it.
Adrian you should upload a 30 second clip of you changing the brakes to UA-cam shorts, I go there to get quick tutorial a lot and I’m sure many others do
I was going to do that very thing, but then forgot 🤣🙈. I will do some shorts in the future Paddy 👍
Well done great video would you talk about derogation sometime if you get time keep it going
What's the name of the gel u used for the ringworm, national nutrition have a powder that goes on theeal
I’ll have a proper look and get back to you Gerard, but don’t buy it till I see if it’s any good first. I’ll update on it soon. 👍
general height for the boom is the gap the nozzels are is height above the crop !!!! hows that then , love all the videos >>>>>>
That’s it in a nut shell Pete, cheers lad 👍
You can lower the boom on the quad as well.
You can yes but it tends to get caught easy if it’s put any lower on this one
@@IFarmWeFarm ok. Yes I can imagine that. And you will have tried that out already I guess.
Quick question Adrian, have you sown any multi species sward, I wonder how it would work with milking cows?
Never have but I didn’t would consider it in the future Patrick
Hi Adrian what psi do you put into the tyres on the quad
Depends on the quad and tyre lad, keep them very low. Most people like myself would ya e had them to hard at times as that left the steering easier to turn but that’s wrong. I’ve about 8 psi in mine as the tyres are thick walled. Makes a big difference with grip and comfort.
@@IFarmWeFarm yeah I seen a safety demonstration at tullamore show and they had them at 5psi to get as much wheel surface on the ground as possible for grip but obviously the steering can be very heavy
I would like a video that has your dad in it
Hopefully one day, he wouldn’t be a man for cameras 🫣.
What makes your clippers Adrian?
Clipsters Philip, been very good so fare. Done all the cattle last year with them, very light compared to the Liscop we have
👋 👋.
Adrain was the road a private road you run the cows down?
👍
👍🐄If possible, add Russian to the credits
That wee road.....and I thought the department of environment was bad in Northern Ireland!!🙈🤔
I wish I lived near you Adrian it would give me great pleasure to help with your workload ,GHTYAY
Thank Keith, it would be welcome this time of year for sure 👍
Not surprised the road is bad with you having a digger on tractor
Don’t have a digger lad
@@IFarmWeFarm thank you for taking your busy time to reply…. Get the girls a credit to you to edit your videos etc you do need more lol…. A good idea of mine stop though traffic…. British and Irish need keep us fed forget rest of world … shame I’m in England love see your farm
The road looks like a cow road 😳
If that’s heel max you using be carful it’s to be used very sparingly and it’s for digital dermatitis it contains acid
I must look at it properly when I get to the shed, thanks for the heads up as I know very little about it. Just was recommended to give it a go. 👍
Do you have scutch grass in field.
Not really lad
🚜🚜🚜😎😎😎👍
Will you be starting hedge cutting
Yes repair to do on it next week first
🇨🇮👍👍😁😁
Perhaps it‘s good you didn‘t make those latches on the wall. Now you exactly know where to put them. When you first build it, you would have probably put them on the wrong spots.
That true lad, I can use that as an excuse anyhow 🤣👍
@@IFarmWeFarm 🤣🤣
G-clamp... just saying 🤐
We always called it a C-Clamp, it’s actually called both. I had to go on the owl Google search for that one 🤣
as normal cracking video
Thanks Ian
*nowhere & *important
👍 predictive text
Hard to get the time to do everything right 😜