ANEST IWATA LPH80
Вставка
- Опубліковано 26 сер 2024
- My opinion on the Anest-Iwata is out and I hope you find it useful 👍🏻
*** SORRY I MADE A MISTAKE THE LARGER POT SIZE IS 250ml NOT 125ml ***
Thank you to refinish systemsl #td for giving me the opportunity to test and talk about it 🙏
#damageundone
.#autoservice #refinisherporn #cars #auto #mercedes #love #carservice #bodyshop #autoshop #collisionrepair #ford #bmw #autorepair #autobodyshop #repair #carsofinstagram #garage #paint #photography #automotive #autodetailing #audi #bodywork #carrepair #carcare #car #collision #autobody Anest Iwata
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
I have heard so may people say this gun isn't good for larger repairs but it is. Thanks for showing this in your video! This is actually an all around good gun. Small areas larger areas, like full quarter or door panels , Bumpers. Base and clear as well!!
I’m glad you liked it, yes It can be used for larger areas but ideally you need a 1.2mm setup or I think it will struggle slightly
@@damageundoneltd
Which they do make and also in a "wider fan" model, both in a 1 and 1.2
It shoots clear and burn in solvent really well also in case your wondering
I know a lot of guys like to use it as an all round gun but I personally preferred to put my clear down with a slightly larger gun.
Nice share though and I’m glad that you like it
great chanel thanks for tips
You are welcome, thank you for watching
Hi Wayne! I have this little gun about 1 year 1.0 and 1.2 tips. I like it! :-)
Thank you for sharing that with us
So if you purchase the model qoth a 1.2 tip you can add a differnt tip on it as well. Do you have the part number foe thebsmall 1.0 tip?
You can change the tips and cap but sometimes for a little more you can just buy another gun
Saw this one on Instagram, how do you like the Colad snap lids? I tried them but couldn't get on with them which is a shame as I use the pots for mixing, I used the mid size think it's 300ml but had a couple of pots split when fitting the lid and a leak when fitting the pot to the gun, I still have a box of the lids but went back to my 3M PPS cups which I like apart from the price!
Ok so I have heard a few people mention this and it has happened to me once but that is because I did not put the lid on correctly. It needs to be applied at an angle first, not straight down
I like the Colad cups because they are the only ones on the market that come with a 90 micron filter and this is perfect for solid colours and clear
Ah I see so that was why they were splitting, I'll have to try them again, yeah agree with the filters and are what I used plus if like me and you are a tight old git you can reuse them a few times as you can remove the filter and the rubber check valve to clean them. 🙄
You can and you can buy just the filters but cleaning it all sounds like extra work and time is money
thanks for the video, what do you recommend me for paint a helmet the iwata vault hp-th2 or iwata LPH80, thanks
Hi, I am sorry but I have not used the vault so I am not able to give you the best advice here.
The lph80 is very good and you can do very fine work and also larger jobs
Would this be good for a full car? 2k acrylic
There are some that would say yes but in my opinion no.
I would always go for a larger gun like the Walcom 360, the Sagola 4600 or the Meiji finer core, even the Sata 1500 would be a good option
Iwata do the 400 series but previous models I’ve tested have produced great finishes but were too slow for me and required a little more setting up.
So what's your favorite clear coat gun?
For a long time my favourite has been the Sagola 4600 xtreme on a 1.2xl set up and DVR Titania PRO air cap
@@damageundoneltdThanks! I always cleared with the lph80. is the Sagola going to be a major improvement?
@EladFish immense difference
Have a look at this insta post of mine
instagram.com/reel/C0jzadbskA2/?igshid=MzRlODBiNWFlZA==
Can this gun be used for base and clear?
Oh yes definitely and many refinishers do use it for both but I have other clear guns that I like
@@damageundoneltd Hi what ys your fav clear coat gun for small jobs? Thanks (but I have other clear guns that I like)
I don’t use small guns for clear, only base.
I use either my Sagola 4600xtreme or my walcom 360 both have clear caps and both are on a 1.2mm setup
These are used no matter what size the job is
@@damageundoneltd Thanks Wayne for your reply