Awesome tractor. I got tired of not being able to stand up without it cutting off on my CK3510. I ordered a set safety bypass connector off of eBay for $8. Been working great for almost years now.
Thank you. I just installed one of those bypass switches to today! You are right…it works perfectly. Funny thing is my open station 2018/2019 Ck4010 does not have a seat safety switch which makes no sense for it to not have one and the NS cab has one. Should be the opposite. Anyway I was raise on a tractors without all the safety stuff and prefer them but I know they were put on tractors for reasons. Again thanks.
I bought a 2610 and you can buy a seat over ride switch for like 10 bucks,can't recall where I got it but that drive me nuts also,nice tractor my next one will be a cab.
One of the reasons I went with a Kioti DK5310SE Cab was the shape of the loader arms in front - it curves down and gives great visibility where the NS and NX both had blockier loaders that reduced visibility. The only downside with my DK is that I could use draft control and I'd need the NS or NX to get draft control. These Kioti's are all good tractors, though.
Had mine about a week with a back hoe and grappler only complaint thus far out aside of the safety switch in the seat is that the 3 point hitch is a Cat 2 which is not compatible with my quick hitch which only accepts a Cat 1, also no place yet for a tool box or a place to mount my chain saw.
I had a NX5510 for 6 years, racked up 1200 hours, it was a fantastic tractor, I acquired more land and traded it in on a RX7320. Both are fantastic tractors. As far as seeing the bucket or attachments while trying to hook up to the loader, no visibility is just part for the course. Big tractor problems I guess. My kioti, deere, and my new holland all are blind when hooking to the loader quick attach. You Puget a feel for it over time.
I dont like the Safety switch either. It's taking me some getting use to being in Neutral and locking brakes on my DK5320SE. I love the Tractor but the darn Safety switch is a pain.
I ordered a by pass switch from Amazon a couple weeks for a few $ and plugged it into the switch behind the seat. Super easy. No wire splicing. Just plug and play. Works perfectly.
Kioti doesn’t stand behind its warranty. They told me straight out that the warranty is in place but it doesn’t cover anything. Especially don’t talk to Brandon Johnson he will say nothing of value
I have not seen that to be the case with the 2 Kioti tractors that I own. Maybe you have a bad dealer. I’ve had warranty work done on my 6 yr old ck4010. It fact the last work done ( front axle bearing seal) was this past fall with less than 3 months left on the warranty. It did not cost a penny.
Build a shelf for your loader implements so you can see them when hooking up 👍
Awesome tractor. I got tired of not being able to stand up without it cutting off on my CK3510. I ordered a set safety bypass connector off of eBay for $8. Been working great for almost years now.
Thank you. I just installed one of those bypass switches to today! You are right…it works perfectly. Funny thing is my open station 2018/2019 Ck4010 does not have a seat safety switch which makes no sense for it to not have one and the NS cab has one. Should be the opposite. Anyway I was raise on a tractors without all the safety stuff and prefer them but I know they were put on tractors for reasons. Again thanks.
Use white paint on the top of bucket and it helps greatly when hooking up tools on the loader. Mark all your loader implements.
A guy sells the safety switch delete plug on eBay, same as my nx. Best $10 you will spend
Found one. Agees…Best money I could spend.
Install back up camera on loader js
I have the NX Cab and the seat switch is a pain. I used a blue fork lug and jumped mine out. Fits perfectly.
I bought a 2610 and you can buy a seat over ride switch for like 10 bucks,can't recall where I got it but that drive me nuts also,nice tractor my next one will be a cab.
Thanks for the tip. I’ll look into that
One of the reasons I went with a Kioti DK5310SE Cab was the shape of the loader arms in front - it curves down and gives great visibility where the NS and NX both had blockier loaders that reduced visibility. The only downside with my DK is that I could use draft control and I'd need the NS or NX to get draft control. These Kioti's are all good tractors, though.
Agreed
I see you stepped it up a notch Wes! Nice tractor!
Thanks 👍
Had mine about a week with a back hoe and grappler only complaint thus far out aside of the safety switch in the seat is that the 3 point hitch is a Cat 2 which is not compatible with my quick hitch which only accepts a Cat 1, also no place yet for a tool box or a place to mount my chain saw.
Congrats. You can pick up a bypass switch for the seat switch for $10 or less
@@wesfogle3311 Just came yesterday from Amazon, thank you.
You can get a kioti seat bypass connector from E Bay for around 10bucks
I got one a few weeks ago. It did the trick. Thanks
I had a NX5510 for 6 years, racked up 1200 hours, it was a fantastic tractor, I acquired more land and traded it in on a RX7320. Both are fantastic tractors. As far as seeing the bucket or attachments while trying to hook up to the loader, no visibility is just part for the course. Big tractor problems I guess. My kioti, deere, and my new holland all are blind when hooking to the loader quick attach. You Puget a feel for it over time.
Thank for your thoughts. I agree with you.
Nice 👍👍
I dont like the Safety switch either. It's taking me some getting use to being in Neutral and locking brakes on my DK5320SE. I love the Tractor but the darn Safety switch is a pain.
I ordered a by pass switch from Amazon a couple weeks for a few $ and plugged it into the switch behind the seat. Super easy. No wire splicing. Just plug and play. Works perfectly.
@@wesfogle3311 Awesome 👌. I will be getting one of those. Thanks for the feedback 😀
@@redpoole9323 👍
get a hydro top link and thank me later !
Kioti doesn’t stand behind its warranty. They told me straight out that the warranty is in place but it doesn’t cover anything. Especially don’t talk to Brandon Johnson he will say nothing of value
I have not seen that to be the case with the 2 Kioti tractors that I own. Maybe you have a bad dealer. I’ve had warranty work done on my 6 yr old ck4010. It fact the last work done ( front axle bearing seal) was this past fall with less than 3 months left on the warranty. It did not cost a penny.
@@wesfogle3311 it is them.